Professional Documents
Culture Documents
The D2 Type Shifting Tool is used to provide a controlled, selective method of opening and closing BFC Model L
type sliding sleeves. The D2 Shifting Tool has a locating collet which indicates to the operator when a sliding
sleeve is reached and also when the tool has passed through a sleeve or nipple.
When the D2 Type Shifting Tool has either opened or closed a sliding sleeve, the tool will give a positive indication
that the shift has been successful, if an attempt is made to repeat the operation in the same sleeve. If a tool is
used to open a sleeve and the pressure difference is greater in the annulus, the tools release mechanism is held by
the flow until the pressure has balanced and the tool can be removed. When the tool is seated in a sleeve it can be
released without shifting the closing sleeve.
The D2 Type Shifting Tools can be used to trip and shut sliding sleeves in the same run when run in tandem.
Please specify collet size when ordering.
'D2' Type Shifting Tools
SSD I.D.
Fishneck O.D.
Part Number
1.875"
1.906"
1.375"
15/16UN
B084-022
2.313"
2.343"
1.75"
15/16UN
B084-023
2.813"
2.843"
2.313"
1-1/16UN
B084-024
3.813"
3.867"
2.313"
1-1/16UN
B084-025
PROPSITO:
A cambio de "L" en mangas de tipo de deslizamiento controlado de forma selectiva.
ESPECIFICACIONES:
Correr en posicin vertical para abrir las mangas y se ejecutan en posicin invertida para cerrar las mangas.
NOTA:
La dimensin de la parte inferior de la Collet chichn en la parte inferior del retractor, cuando la herramienta
se monta, debe ser la herramienta precisa para funcionar correctamente.
2 "herramienta-15,69"
2 1 / 2 "herramienta-16,62"
3 "herramienta-17,12"
Descargar Schematics
Ver un vdeo
BO-Shifting Tool
Bomb well
PURPOSE:
To provide a protective housing for downhole equipment against fluids and vibrations.
SPECIFICATIONS:
Available upon request.
Download schematics
tubing stop
Download schematics
Watch a Video
PX-Equalizing Assembly
PURPOSE:
To hold pressure differentials from above or below by attaching to a X or XN locking mandrel.
SPECIFICATION:
Assembles with corresponding size of lock.
More information available upon request.
A-Spears
Wire Finder
Wire Grab
PURPOSE:
To shift any of the downhole sleeves in one direction without disturbing any other sleeves.
SPECIFICATIONS:
Available upon request.
Download Schematics
Watch a Video
B-Shifting Tool
PURPOSE:
To open and cloxe sliding sleeves and to shift tubing release subs.
SPECIFICATIONS:
Available with anti-shear ring to lock the B-shifting tool in running position.
More information available upon request.
Download Schematics
Watch a Video
Dump Bailer
PURPOSE:
To dump fluids down trhe well on top of any device or blockage.
SPECIFICATIONS:
Shear disc available in Glass, Brass and Steel.
Bailer volume and other information available upon request.
Download Schematics
Watch a Video
Hydrostatic Bailer
Shown with ball check and shoe, with flapper sub assembly on the
side.
PURPOSE:
To remove sand or debris surronding a subsurface device by using a
pressure chamber.
SPECIFICATIONS:
Special size needs available upon request.
More information available upon request.
Download Schematics
Watch a Video
Shown with connector sub load barrel and optional flapper sub assembly.
PURPOSE:
Used to remove debris that is down the wellbore.
SPECIFICATIONS:
Available upon request.
W&ZLocks
Download Schematics
Watch a Video
D-Locks
PURPOSE:
Used to land and lock in an API tubing collar and to seal at the set positions to retain
a pressure diffential from above and below.
SPECIFICATIONS:
Available upon request.
N-Locks
Download Schematics
Watch a Video
PURPOSE:
To set in any type "N" landing nipple.
SPECIFICATIONS:
Available upon request.
R-Lock
Download Schematics
Watch a Video
PURPOSE:
To selectively set in any type R landing nipple of the same size.
SPECIFICATIONS:
Available in R and RN profiles.
More information available upon request.
X-Lock
Download Schematics
Watch a Video
PURPOSE:
To selectively set in any type X landing nipple of the same size.
SPECIFICATIONS:
Available in X and XN profiles.
More information available upon request.
Download Schematics
Bumper Springs
JD-PULLING TOOL
PURPOSE:
A jar down pulling tool used to either set or retrieve pulling necks
SPECIFICATIONS:
Download Schematics
Watch a Video
JU-PULLING TOOL
PURPOSE:
A jar up pulling tool used to either set or retrieve pulling necks.
SPECIFICATIONS:
AVAILABLE UPON REQUEST
Download Schematics
Watch a Video
GS-Pulling Tool
PURPOSE:
To set and retieve tools with an internal fishneck.
SPECIFICATIONS:
Available upon request.
Download schematics
Watch a Video
R-Pulling Tool
PURPOSE:
A jar up pulling tool used to either set or retrieve pulling necks.
SPECIFICATIONS:
Available upon request.
Download Schematics
Watch a Video
S-Pulling Tool
Purpose:
A jar down to shear pulling tool, used to either set or retrieve subsurface tools
Specification:
More information available
upon request.
Download schematics
Watch a Video
PURPOSE:
A service tool to used to run and set R and RN locking mandrels.
SPECIFICATIONS:
Available upon request.
Download Schematics
Watch a Video
Centralizer
PURPOSE:
To hold the tool string in the middle of the hole
SPECIFICATIONS:
Available upon request
Download Schematics
Watch a Video
Centralizer
PURPOSE:
To hold the tool string in the middle of the hole
SPECIFICATIONS:
Available upon request
Chisel
Download Schematics
Watch a Video
File Broaches
Knuckle Jars
PURPOSE:
To provide flexibility in the wireline, as well as light jarring.
SPECIFICATIONS:
Information available upon request.
Download Schematics
Cam Cutter
PURPOSE:
To assemble around the line at the well surface and be able to ride down the well on the line and cut the line
once it reaches the stopped tooling.
SPECIFICATIONS:
Made to cut most line sizes.
Download Schematics
Watch a Video
Rope Socket
PURPOSE:
To securely tie in the wireline to the toolstring.
SPECIFICATIONS:
Available upon request
Roller Stem
Swedging Tool
Tube Jar
PURPOSE:
Tube Jar
-The same use and idea of a spang jar but it is used when the use of a spang jar is impratical.
Shock Absorber
-Used to avoid the jarring motion when the toolstring is pulled or lands on a surface harshly.
SPECIFICATIONS:
Available upon request.
Download Schematics
Tubing Brush
PURPOSE:
To locate the bottom of the tubing.
Also to take a sample from the bottom of the well.
SPECIFICATIONS:
Available upon request.
Download Schematics
Watch a Video
AW-Test Tool
PURPOSE:
Plugs off the tubing bore from one direction.
SPECIFICATIONS:
Available upon request.
Download Schematics
Watch a Video
PURPOSE:
To plug off the tubing bore from one direction.
SPECIFICATIONS:
Available upon request.
Download Schematics
Watch a Video
XO-TEST TOOL
PURPOSE:
To pressure test tubing above which the tool is set.
SPECIFICATIONS:
3" tool has interchangeable packing sizes of 2.750" and 2.813".
More information available upon request.
Download Schematics
Watch a Video
Collar stop
Hold downs
A spears
positive catch
A3-packoff
G-packoff
Firing head
swivel joint
perforator