You are on page 1of 1

PAINT

Jotashield Alkali Resistant Primer

Jotun Block Filler

Provides an excellent base for subsequent coats.


Features
Excellent penetration into the substrate there by Provides an excellent base for subsequent coats.
and
providing the best adhesion. Offers best
Easy application.
benefits
protection against alkali attack.

Substrate

Cement plaster, concrete, block work, rendered


surfaces, gypsum board etc.

Cement plaster, concrete, block work, rendered


surfaces, gypsum board etc. Substrate should
have sufficient strength to receive the paint. Any
defects in the substrate like surface undulations,
cracks, pin holes etc., should be rectified/filled
before starting painting.

Drying
times

3h

6h

The substrate must be sound, clean, dry and free The substrate must be sound, clean, dry and free
from dust, oil, grease, laitance etc. All traces of
from dust, oil, grease, laitance etc. All traces of
Surface
form release agents/curing agents must be
form release agents/curing agents must be
preparati
removed. A light sanding with suitable abrasive removed. A light sanding with suitable abrasive
on
material is recommended before application. Any material is recommended before application. Any
resulting dust/loose particles must be removed. resulting dust/loose particles must be removed.
If any Block filler is used to rectify imperfections
As a primer for textured topcoats in the World of on the substrate, proper sanding followed by a full
Remarks
Textures.
undiluted coat of Penetrating Sealer must be
used before applying any Jotashield topcoats.

Jotashield Colourxtreme Matt


Compliance
The unique heat reflective features and UV
protected colours offer outstanding protection
against heat from Infrared (IR) rays and
destructive effect of UV rays present in Sunlight.
Specially designed to withstand the harsh middle
east weather conditions and provides durable &
long lasting matt finish with low dirt pick up. It is a
low-VOC, eco-friendly product that contributes to
reducing energy consumption in cooling the
interiors of buildings. Its unique formulation
protects concrete from carbonation (Acts as
anticarbonation coating). Has ability to cover
cracks up to 0.3mm.
Cement plaster, concrete, block work, rendered
surfaces etc. Substrate should have sufficient
Cement board was used as subtrate for primer;
strength to receive the paint. Any defects in the
Cement board fixation was strong to receive the
substrate like surface undulations, cracks, pin
block filler as texture, cracks were rectified prior;
holes etc., should be rectified/filled before starting
Jotun Block filler was used as texture and filler
painting. The compatibility of any third party filling
prior the topcoat.
material, if used, shall be confirmed with Jotun
before application.
4h

Complied

The substrate must be sound, clean, dry and free


from dust, oil, grease, laitance etc. All traces of
form release agents/curing agents must be
removed. A light sanding with suitable abrasive
material is recommended before application. Any
resulting dust/loose particles must be removed.

Complied

Masking tape has to be removed immediately


after application of the topcoat.

Knauf Joint tape and Terraco Acrylic filler were


used for joints of subtrate, proper sanding were
done prior application of block filler

You might also like