Professional Documents
Culture Documents
Features
N
DIP14
(Plastic package)
D
TSSOP-14
(Thin shrink small outline package)
Description
The TL084, TL084A and TL084B are high-speed
JFET input quad operational amplifiers
incorporating well matched, high voltage JFET
and bipolar transistors in a monolithic integrated
circuit.
D
SO-14
(Plastic micropackage)
Pin connections
(Top view)
14 Output 4
Output 1 1
Inverting Input 1 2
13 Inverting Input 4
Non-inverting Input 1 3
12 Non-inverting Input 4
11 VCC -
VCC + 4
Non-inverting Input 2 5
10 Non-inverting Input 3
Inverting Input 2 6
Inverting Input 3
Output 3
Output 2 7
July 2012
This is information on a product in full production.
1/20
www.st.com
20
Schematic diagram
TL084
Schematic diagram
Figure 1.
Non-inverting
input
Inverting
input
1 0 0
2 0 0
Output
1 0 0
30k
8.2k
1.3k
35k
1.3k
35k
VCC
2/20
1 0 0
TL084
Symbol
Parameter
Unit
TL084I, AI, BI
VCC
TL084C, AC, BC
18
15
30
105
80
100
C/W
Rthjc
31
33
32
C/W
Ptot
Power dissipation
680
mW
(2)
Vin
Input voltage
Vid
(4)
(5)
Rthja
SO-14
DIP14
TSSOP14
Tstg
ESD
Infinite
-40 to +105
model(7)
model(9)
0 to +70
-65 to +150
C
C
1000
150
1500
1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the
supply voltages where the zero reference level is the midpoint between VCC+ and VCC-.
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,
whichever is less.
3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
4. Short-circuits can cause excessive heating and destructive dissipation.
5. Rth are typical values.
6. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be
limited to ensure that the dissipation rating is not exceeded.
7. Human body model: 100 pF discharged through a 1.5 k resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 ), done for all couples of pin
combinations with other pins floating.
9. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to the ground.
3/20
4/20
TL084
Operating conditions
Parameter
VCC
Toper
TL084I, AI, BI
TL084C, AC, BC
6 to 36
-40 to +105
Unit
V
0 to +70
TL084
Electrical characteristics
Electrical characteristics
Table 3.
Symbol
Unit
Min.
Vio
TL084C
Parameter
Input offset voltage (Rs = 50)
Tamb = +25C TL084
TL084A
TL084B
Tmin Tamb TmaxTL084
TL084A
TL084B
Typ.
Max.
3
3
1
10
6
3
13
7
5
Min.
Typ.
Max.
10
mV
13
V/C
10
Iio
100
4
100
4
pA
nA
Iib
20
200
20
30
200
20
pA
nA
Avd
50
25
200
25
15
200
V/mV
SVR
80
80
86
70
70
86
dB
DVio
ICC
Vicm
CMR
Ios
Vopp
SR
1.4
10
2.5
2.5
1.4
2.5
2.5
mA
11
+15
-12
11
+15
-12
80
80
86
70
70
86
dB
10
10
40
10
10
40
10
12
10
12
12
13.5
10
12
10
12
12
13.5
16
16
V/s
Slew rate
Vin = 10V, RL = 2k, CL = 100pF, unity gain
60
60
60
60
mA
5/20
Electrical characteristics
Table 3.
TL084
Symbol
TL084C
Parameter
Unit
Min.
Typ.
Max.
Min.
Typ.
Max.
tr
Rise time
Vin = 20mV, RL = 2k, CL = 100pF, unity gain
0.1
0.1
Kov
Overshoot
Vin = 20mV, RL = 2k, CL = 100pF, unity gain
10
10
GBP
MHz
Ri
THD
2.5
2.5
Input resistance
1012
1012
0.01
0.01
en
15
15
nV
-----------Hz
Phase margin
45
45
degrees
Channel separation
Av = 100
120
120
dB
Vo1/Vo2
1. The input bias currents are junction leakage currents which approximately double for every 10C increase in the junction
temperature.
6/20
TL084
Electrical characteristics
Figure 2.
Figure 4.
Figure 5.
7/20
Electrical characteristics
Figure 7.
Figure 8.
20
15
10
5
0
DIFFERENTIAL VOLTAGE
AMPLIFICATION (V/mV)
15V
10
1
0.1
16
400
200
100
40
20
10
25
50
75
100
V CC = 15V
V O = 10V
4
2
1
-25
125
R L = 2k
-75
-50
-25
25
50
75
100
125
TEMPERATURE (C)
250
225
200
175
150
125
100
75
50
25
0
V CC = 15V
No signal
No load
-75
-50
-25
25
50
TEMPERATURE (C)
8/20
14
TEMPERATURE (C)
(V/mV)
4
6
8
10
12
SUPPLY VOLTAGE ( V)
1000
V CC =
RL = 10 k
Tamb = +25C
25
Figure 9.
100
0.01
-50
30
Figure 6.
TL084
75
100
125
TL084
Electrical characteristics
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Figure 12. Supply current per amplifier versus Figure 13. Supply current per amplifier versus
free air temperature
supply voltage
V CC = 15V
No signal
No load
-75
-50
-25
25
50
75
100
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Tamb = +25C
No signal
No load
125
TEMPERATURE (C)
89
R L = 10 k
VC C = 15V
88
87
86
85
84
83
-75
-50
-25
25
50
75
100
16
125
4
6
10
12 14
8
SUPPLY VOLTAGE ( V)
6
4
OUTPUT
INPUT
2
0
VCC= 15V
R L = 2 kW
-2
C L= 100pF
Tamb = +25C
-4
-6
0.5
1.5
2.5
3.5
TIME (ms)
TEMPERATURE (C)
Figure 16. Output voltage versus elapsed time Figure 17. Equivalent input noise voltage
versus frequency
70
28
20
90%
16
12
8
V CC = 15V
R L = 2k
Tamb = +25C
10%
tr
-4
0
VCC = 15V
A V = 10
R S = 100
T amb = +25C
60
OVERSHOOT
24
0.1
0.2
0.3
0.4
0.5
0.6
0.7
TIME ( s)
50
40
30
20
10
0
10
40
100
400 1k
4k
10k
40k 100k
FREQUENCY (Hz)
9/20
Electrical characteristics
TL084
1
V VCC = = 15V
15V
CC
A AV V= =1 1
V VO O(rms)
= =6V6V
(rms)
0.4
0.1
0.04
T amb
+25C
T amb= =+25C
0.01
0.004
0.001
100
400
1k
4k
10k
40k
100k
FREQUENCY (Hz)
10/20
TL084
eI
1/4
TL084
eo
RL
CL = 100pF
11/20
Typical applications
TL084
Typical applications
fO = 100kHz
1M
1/4
TL084
Output A
1/4
TL084
Output B
1/4
TL084
Output C
1/4
TL084
1F
Input
100k
100k
100k
1OO F
V CC+
100k
16k
22 0p F
220 pF
43k
Input
43k
43k
22 0p F
1/4
TL 08 4
43k
30k
22 0p F
43k
1/4
TL 08 4
1.5 k
1.5 k
30k
1/4
TL 08 4
43k
1/4
TL 08 4
Output B
Ground
Output A
12/20
TL084
Typical applications
13/20
Package information
TL084
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
6.1
A2
A1
E1
PIN 1 IDENTIFICATION
Inches
Ref.
Min.
Typ.
Min.
Typ.
1.2
A1
0.05
A2
0.8
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
0.09
0.20
0.004
0.0089
4.9
5.1
0.193
0.197
0.201
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
14/20
Max.
0.65 BSC
L1
0.45
0.60
0.0256 BSC
8
0.75
0.018
8
0.024
0.030
TL084
6.2
Package information
Table 4.
Ref.
Millimeters
Min.
a1
0.51
1.39
Typ.
Inches
Max.
Min.
Typ.
Max.
0.020
1.65
0.055
0.065
0.5
0.020
b1
0.25
0.010
20
0.787
8.5
0.335
2.54
0.100
e3
15.24
0.600
7.1
0.280
5.1
0.201
L
Z
3.3
1.27
0.130
2.54
0.050
0.100
15/20
Package information
6.3
TL084
0016019_E
16/20
TL084
Package information
Table 5.
Ref.
Millimeters
Min.
Typ.
A
a1
Inches
Max.
Min.
Typ.
1.75
0.1
0.2
a2
Max.
0.068
0.003
0.007
1.65
0.064
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
0.5
0.019
c1
45 (typ.)
8.55
8.75
0.336
0.344
5.8
6.2
0.228
0.244
1.27
0.050
e3
7.62
0.300
3.8
4.0
0.149
0.157
4.6
5.3
0.181
0.208
0.5
1.27
0.019
0.050
0.68
0.026
8 (max.)
17/20
Ordering information
TL084
Ordering information
Table 6.
Order codes
Order code
Temperature
range
TL084IN
TL084AIN
TL084BIN
TL084ID/IDT
TL084AID/AIDT
TL084BID/BIDT
TL084IYDT(1)
TL084AIYDT(1)
TL084BIYDT(1)
TL084CN
TL084ACN
TL084BCN
TL084CP/CPT
TL084ACP/ACPT
TL084BCP/BCPT
Packing
Marking
DIP14
Tube
TL084IN
TL084AIN
TL084BIN
SO-14
Tube or
tape & reel
084I
084AI
084BI
SO-14
(Automotive grade)
Tube or
tape & reel
084IY
084AIY
084BIY
TSSOP14
Tube or
tape & reel
084I
084AI
084BI
DIP14
Tube
TL084CN
TL084ACN
TL084BCN
SO-14
Tube or
tape & reel
084C
084AC
084BC
TSSOP14
Tube or
tape & reel
084C
084AC
084BC
-40C, +105C
TL084IP/IPT
TL084AIP/AIPT
TL084BIP/BIPT
TL084CD/CDT
TL084ACD/ACDT
TL084BCD/BCDT
Package
0C, +70C
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 & Q 002 or equivalent.
18/20
TL084
Revision history
Revision history
Table 7.
Date
Revision
Changes
28-Mar-2001
Initial release.
30-Jul-2007
Added values for Rthja, Rthjc and ESD in Table 1: Absolute maximum
ratings.
Added Table 2: Operating conditions.
Expanded Table 6: Order codes.
Template update.
15-Jul-2008
05-Jul-2012
19/20
TL084
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to STs terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
20/20