Professional Documents
Culture Documents
SCHEDULE OF RATES
FOR
THANE & PALGHAR DISTRICT
2015-2016
SUPERINTENDING ENGINEER
THANE (PW) CIRCLE THANE
INDEX
SR.
NO.
CLASSIFICATION OF ITEMS
GENERAL NOTES
PAGE NO.
FROM
TO
1
BUILDING WORKS
2
2.1
Bd-A Excavation
2.2
10
13
2.3
14
15
2.4
16
17
2.5
18
25
2.6
26
28
2.7
29
31
2.8
32
32
2.9
33
44
45
47
48
53
54
67
68
69
70
73
74
74
75
77
78
88
89
119
120
120
121
141
142
156
ROAD WORK
157
181
BRIDGE WORK
182
224
CD WORK
225
228
BORING
229
232
SURVEY WORK
7.1
Departmental Agencies
233
237
7.2
Private Agencies
238
244
SR.
NO.
CLASSIFICATION OF ITEMS
PAGE NO.
FROM
TO
VIDEOGRAPHY
245
246
247
251
10
Material Rates
252
280
11
Labour Rates
281
282
12
Annexure A ( Pipe)
283
283
13
284
285
14
286
286
15
Material consumption
287
305
16
Abbreviations
306
307
17
308
312
18
313
319
19
320
320
GENERAL NOTES
1
Schedule of Rates
prepared for the year 2015-16 is Operative
st
1 October 2015 and applicable for Thane & Palghar District.
from
For the rates in Corporation area, Notified Tribal area, Hilly inaccessible
areas, Central Jail premises & Mental Hospital premises an increase of
percentages over the normal schedule of rates (Basic completed item Rates)
Prescribed for the year 2015-16 are as follows.
1
2
3
Corporation Areas
5%
Notified Tribal Areas for building and minor and 10%
major bridge work only
Inside Premises of Jail, Mental Hospital 15%
premises ,
The increase in rates as above should be applicable only one at a time e.g. if Central
Jail is situated in Corporation area an increase of only 15% for the jail is to
be considered and not 20% (15% + 5%). Issue
rates of Schedule A
materials for above notified area shall be increased by respective percentage.
The above percentage should be applied on the cost of items after deducting the cost
of Specified materials, if issued on Schedule 'A'.
Schedule of rates is based on the following basic rates of materials:
Sr. No.
1
Description of materials
Rates for materials
Cement
Rs.
Mild steel
Structural Steel
Rates / Unit
6600/- per M.T.
4.1
4.2
4.3
0.50%
As
per
Government
of
Maharashtra,
Revenue
and
Forest
Departments Basic Rates of Rubble, Hand broken metal and Murum, Earth
considered in this schedule are excluding Royalty charges. While preparing the
estimates, the royalty charges shall be added separately in the estimate at the rate
specified by Govt. of Maharashtra, Revenue & Forest deptt. Notification dated 11th
Mar. 2015.
4.5
As Royalty charges for bricks, sand and crushed metal (as these are factory product)
are already paid by the quarry owner, same should not be considered in the rate
analysis.
4.6
The basic rates of materials are as per the Rates charged by the main producers
/ suppliers at their respective points of supply, as on the date of
implementation of D.S.R; which includes all taxes such as excise, CST, BST,
LBT, Terminal TAX, VAT, Educational Tax, Toll Tax, etc.
The rates of bulk/packed bitumen, bitumen emulsion adopted for the items
st
of bituminous works are based on the rates prevailing on 1 of June 2015 at
ex- Refinery Mumbai. The rates are inclusive of excise duty of 16% with
additional education cess of 3 % on excise duty and VAT 12.50%. Subsequent
increase/decrease, if any, in these rates shall be accounted for in the rate analysis of
the items while framing the estimate.
5.1
The cost per trip shown in statement C, also includes charges of running empty
vehicle for return trip.
For
calculation
of transportation charges rates
tabulated in material master for following items are considered in the formula.
a) Mazdoor
b) Diesel
of pay
load
c) Mobile Oil
factor
5.2
For calculation
considered.
5.3
The rates worked out in the Rate Abstract includes initial lead of 5 Km. for
all completed items, but excluding M.O.R.T. & H. Blacktopping items. For supply
items and providing Earth work in embankment of road materials
lead is not considered in the Rate Abstract. Actual lead charges are to be
added for these supply items while framing the estimate.
5.4
For working out Rates of items for additional leads more than 5 Kms. the
rate analysis should be prepared for actual leads by deducting initial lead
charges of 5 Kms for all completed items. For M.O.R.T. & H., items total lead
charges shall have to be considered in the Rate analysis.
5.5
For leads less than 1.00 Km. the rates worked out for head loads, should
be adopted as per statement C-2.
truck
d) Truck
of 10.00
M.T. Capacity is
5.6
Lead charges for various materials are given in statement C -1 and these are
inclusive of loading and unloading charges. Hence loading and unloading charges
should not of loading and unloading charges. Hence loading and unloading charges
should not be added separately.
5.7
5.8
For items of buildings having ground plus upper floors rate shall be increased
as follows for the floor lift.
Sr. No.
Percentage
increase
i) Ground floor
Nil
ii) First floor
1.00%
iii) Second floor
1.50%
iv) Third floor
2.00%
v) Fourth floor
3.50%
vi) Fifth floor
4.00%
vii) Sixth floor
5.00%
viii) Seventh & floors above
7.00%
The maximum percentage for lift charges shall not be more than 7% .
Floor
Ground floor is the floor having height 3.80 m above average ground level.
The floor to floor height of 3.80 mtrs. is considered for the purpose of
lift charges. For floor to floor height more than 3.80 mtrs. the percentage
increase for the upper floor shall apply. The increase in rates as above
should be on ground floor basic rates only. No cumulative increase shall be
done.
Items to be carried out above terrace such as water proofing treatment on
terrace, water storage tank, parapet wall with coping, Stair -case, lift room with
slabs and water proofing treatment, plastering, painting etc. required for
the completion of building are assumed to be the items of its lower floor.
5.9
Additional lift for various, bridge items shall be as per list given below. Rate shall be
increased by percentage given below. Lift is to be measured with respect to common
datum level which will be specified in tender document/estimate.
a) For raft foundation, the datum level shall be raft top.
b) For Piers, Abutment, Returns, wing walls, pier cap, slab, Box Returns, average
bed level shall be the datum.
i) Additional Lift- up to 4.00 m. above datum level. - Nil.
ii) For every additional 2m.height or depth beyond 4.00 m from Datum - 3.50%
General Guidelines
6.1
The contents of D.S.R. Annexure are as follows :Statement A-1 - Material Master. (Basic rates of materials)
Statement A-2 - Labour Master
6.2
6.3
6.4
For cost towards procurement and temporary storage of water for construction
purpose necessary provisions are made in Rate abstract.
6.5
The rates for items pertaining to Parks & Gardens shall be taken from the DSR of
Director, Parks & Gardens.
6.6
6.7
For items of excavation, and masonry etc. for C.D. works, rates shall be
adopted from corresponding items under respective bridge sections.
6.8
For scaffolding work required to be erected for carrying out repairing work
on external faces of building at various heights (viz. repairs to chajja,
external plastering, painting etc.). The rate of respective item shall be
increased by1% provided the work is carried out by erecting scaffolding. For
specific cases rate analysis shall be got approved from concerned Superintending
Engineer
6.9
For quantity of concrete more than 50 Cu.M. mix design from approved laboratory
is necessary.
6.10 For excavation purpose, manual & mechanical means are proposed, when the
quantity of excavation is more than 100 Cu.M. Excavation by mechanical
means shall invariably be considered. In case the quantity is more than
100 Cu.Mt. and excavation by manual means
is to be proposed,
Superintending Engineers prior approval will be necessary.
6.11 All concrete items considered in D.S.R. are inclusive of normal concrete curing
system. For building works costing more than Rs.125 lakhs, separate item for
intelligent concrete curing system shall be added in estimate.
6.12 If materials are to be supplied by Department under Schedule A of contract,
6.13 No Concrete Mix from R.M.C. Plants shall be used for concrete works without
prior permission of Superintending Engineer.
6.14 Rates of the items using modern machineries with features are worked out including
cost of machineries and features therein.
7
Testing Of Material
7.1
Laboratory testing charges are not considered in the Rate Abstract. Wherever
required separate item shall be taken in the estimate for material testing
charges, on the basis of testing frequency and charges fixed by Vigilance
& Quality Control Circle, Pune for the current year and shall form part
of tender.
7.2
The job mix design for items like M-20 & above grade of concrete mix design, GSB,
asphaltic concrete, bituminous macadam etc. shall be obtained from the V.Q.C.C.
laboratory.
7.3
For Specific tests like span load tests, plate / pile load test etc. which are not included
in the rate analysis of item, the payment /estimates for these tests will be prepared on
the basis of rates approved by M.E.R.I.
This schedule of rates for Thane & Palghar district is prepared for the use of PWD.
However this may be used by other Govt. departments, PSUs, Private bodies &
individuals also at their own discretion. PWD shall not be responsible for any
ambiguity, discrepancy, dispute or financial loss, arising directly or indirectly by using
or following items of DSR by such Govt./ Private bodies or individuals.
Due care has been taken to print the PWD, DSR for Thane & Palghar districts, as
correctly as possible. It is however possible that some errors might have crept , in
case any error or omission is noticed, it may be brought to notice of the
Superintending Engineer, Thane P.W.Circle, Thane.
10
All rights reserved. No part of this publication may be reproduced in any form or by
any means, electronically or mechanically including photo copy, recording or in any
form, storage and retrieval system, without permission in writing from the
Superintending Engineer, P.W.Circle, Thane.
Bd-A Excavation
ITEM
NO.
Description
Unit
By Manual Means
i earth, soil of all types, sand, gravel and soft murum
ii
iii
iv
v
vi
vii
viii
Hard Murum
Hard Murum and boulders
Soft rock
In hard rock (blasting)
In hard rock (By controlled blasting)
Hard rock chiselled and wedged or line drilled
Laterite rock
By Mechanical Means
i earth, soil of all types, sand, gravel and soft murum
ii Hard Murum
iii Hard Murum and boulders
iv Soft rock
Labour
Cu.Mt.
138.00
135.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
149.00
178.00
430.00
654.00
785.00
899.00
545.00
146.00
173.00
369.00
444.00
527.00
873.00
429.00
Cu.Mt.
104.00
46.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
118.00
131.00
323.00
50.00
62.00
261.00
Cu.Mt.
149.00
146.00
ii Hard Murum
Cu.Mt.
169.00
166.00
Bd-A Excavation
ITEM
NO.
Description
Unit
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
183.00
406.00
725.00
179.00
346.00
468.00
Cu.Mt.
117.00
63.00
ii Hard Murum
iii Hard Murum and boulders
iv Soft rock
Cu.Mt.
Cu.Mt.
Cu.Mt.
131.00
143.00
280.00
71.00
74.00
219.00
Cu.Mt.
58.00
56.00
Cu.Mt.
505.00
89.00
Cu.Mt.
950.00
214.00
1254.00
53.00
Cu.Mt.
1057.00
295.00
ITEM
NO.
Description
Unit
Providing ......... RCC cast in situ bored piles of -------- mm dia. each of load capacity as per
design and of specified diameter or as directed,
placed through steel sheel sunk to the required
depth through all strata except rock, excluding
provision of reinforcement, including placing
concrete by tremie arrangement, compaction of
concrete and withdrawal of steel shell etc.
complete.
Spec.
No.:
Bd-B-2
Page
30
A) M-25
i)
ii)
iii)
iv)
v)
vi)
vii)
325 mm diameter
350 mm diameter
400 mm diameter
450 mm diameter
500 mm diameter
550 mm diameter
600 mm diameter
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
1122.00
1151.00
1348.00
1443.00
1758.00
1989.00
2223.00
393.00
403.00
472.00
505.00
563.00
636.00
711.00
B)
i)
ii)
iii)
iv)
v)
vi)
vii)
M-30
325 mm diameter
350 mm diameter
400 mm diameter
450 mm diameter
500 mm diameter
550 mm diameter
600 mm diameter
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
1142.00
1213.00
1396.00
1495.00
1812.00
2067.00
2315.00
393.00
403.00
472.00
505.00
563.00
636.00
711.00
C)
i)
ii)
iii)
iv)
v)
vi)
vii)
M-35
325 mm diameter
350 mm diameter
400 mm diameter
450 mm diameter
500 mm diameter
550 mm diameter
600 mm diameter
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
1153.00
1244.00
1420.00
1521.00
1828.00
2106.00
2361.00
393.00
403.00
472.00
505.00
563.00
636.00
711.00
10
ITEM
NO.
Description
Unit
225 mm
300 mm
380 mm
450 mm
535 mm
600 mm
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
679.00
887.00
1278.00
1516.00
1985.00
2518.00
238.00
310.00
435.00
500.00
635.00
781.00
b)
i
ii
iii
iv
v
vi
M-30
225 mm
300 mm
380 mm
450 mm
535 mm
600 mm
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
687.00
901.00
1301.00
1548.00
2031.00
2576.00
238.00
310.00
435.00
500.00
635.00
781.00
c)
i
ii
iii
iv
v
vi
M-35
225 mm
300 mm
380 mm
450 mm
535 mm
600 mm
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
691.00
909.00
1313.00
1565.00
2055.00
2606.00
238.00
310.00
435.00
500.00
635.00
781.00
11
ITEM
NO.
Description
Unit
B)
a)
i
ii
iii
iv
v
vi
Double Rim
M-25
225 mm
300 mm
380 mm
450 mm
535 mm
600 mm
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
707.00
929.00
1421.00
2015.00
2976.00
3911.00
247.00
320.00
469.00
645.00
878.00
1115.00
b)
i
ii
iii
iv
v
vi
M-30
225 mm
300 mm
380 mm
450 mm
535 mm
600 mm
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
716.00
944.00
1445.00
2049.00
3025.00
3972.00
247.00
320.00
469.00
645.00
878.00
1115.00
c)
i
ii
iii
iv
v
vi
M-35
225 mm
300 mm
380 mm
450 mm
535 mm
600 mm
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
722.00
954.00
1460.00
2069.00
3053.00
4005.00
247.00
320.00
469.00
645.00
878.00
1115.00
No.
240.00
233.00
R.Mt.
135.00
19.00
12
ITEM
NO.
Description
Unit
Rig Hour
416.00
416.00
555.00
555.00
13
R.Mt.
R.Mt.
R.Mt.
40800.00
49300.00
59700.00
380.00
425.00
440.00
0.00
0.00
0.00
ITEM
NO.
Description
Unit
M.T.
67718.00
9410.00
M.T.
65724.00
8786.00
M.T.
65943.00
0.00
14
ITEM
NO.
Description
Unit
M.T.
75856.00
19538.00
Sq.Mt.
3702.00
1689.00
M.T.
69596.00
2168.00
Cm.
6.00
15
4.00
Unit
2
Providing and casting in situ cement concrete 1:2:4
of trap / granite / quartzite / gneiss metal for
foundation & bedding including centering,
formwork, compacting, roughening them if special
finish is to be provided and curing and finishing if
required complete,with..............
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No
70
Cu.Mt.
5025.00
827.00
Cu.Mt.
5021.00
865.00
Cu.Mt.
5170.00
830.00
Cu.Mt.
5165.00
866.00
Cu.Mt.
Cu.Mt.
5170.00
5396.00
827.00
806.00
Cu.Mt.
Cu.Mt.
5165.00
5390.00
863.00
839.00
without Formwork
ii
with Formwork
ii
2
i
ii
B
i
ii
Description
16
Unit
2
Providing and casting in situ cement concrete of
........... grade of trap / granite /quartzite/ gneiss
metal for bed blocks, foundation blocks and
such other items including bailing out water
formwork, compacting, roughening, them if special
finish is to be provided and curing and finishing if
required complete, with.............
Spec. No.: Bd.E.4 Page No. 72 and B-7, Page
No.38
Description
C.C. 1:2:4
Cu.Mt.
5170.00
827.00
ii
B
M-20
Without SCADA with concrete mixer with hopper
Cu.Mt.
5471.00
851.00
i
ii
C.C. 1:2:4
M-20
Providing and casting in situ cement concrete M-20
of trap / granite /quartzite/ gneiss metal for arches
including skew backs as per detailed drawing or as
directed in superstructure including centering, form
work, compacting, finishing with minimum thickness
of 1:3 cement plaster to give a smooth and even
surface or roughening them if special finish is to be
provided and curing complete, Without SCADA
Spec. No.: Bd.E.7 Page No 74 and B-7 Page No
.38
Cu.Mt.
Cu.Mt.
Cu.Mt.
5165.00
5465.00
8455.00
863.00
883.00
899.00
Cu.Mt.
5390.00
846.00
17
Description
Unit
2
Providing and laying in situ cement concrete of
specified grade of trap / granite /quartzite/ gneiss
metal for R.C.C. work in .......................... like raft,
strip foundations, grillage and footings of R.C.C.
columns and steel stanchions etc. including bailing
out water, formwork, cover blocks compaction and
curing etc. (Excluding reinforcement and structural
steel) complete, With...........of grade ........
Spec. No.: Bd.F.3 Page No. 89 Page No.38
Cu.Mt.
Cu.Mt.
Cu.Mt.
4981.00
5494.00
5673.00
888.00
949.00
951.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
4976.00
5172.00
5668.00
922.00
928.00
986.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7375.00
7566.00
7758.00
1422.00
1425.00
1428.00
M-20
M-25
M-30
Providing and casting in situ cement concrete
of specified grade of trap / granite /quartzite/ gneiss
metal for R.C.C. columns as per detailed designs and
drawing or as directed including plywood/steel
centering, formwork, cover blocks compacting and
roughening the surface if special finish is to be
provided and curing complete. (Excluding
reinforcement).With..........
Spec. No.: Bd.F.5 Page No. 89, Page.No. 38
18
ITEM
NO.
Description
Unit
3
Cu.Mt.
Cu.Mt.
Cu.Mt.
4
7370.00
7560.00
7752.00
5
1463.00
1465.00
1467.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7542.00
7734.00
7925.00
1672.00
1679.00
1685.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7537.00
7729.00
7920.00
1716.00
1721.00
1727.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7880.00
8072.00
8264.00
1858.00
1865.00
1872.00
a
b
c
3
M-20
M-25
M-30
Providing & casting in situ cement concrete of
specified grade of trap / granite /quartzite/ gneiss
metal for R.C.C. beams and lintels as per detailed
designs & drawings or as directed including
plywood/steel centering, formwork, cover blocks
compaction & roughening the surface if special finish
is to be provided & curing complete. (Excluding
reinforcement). With.........
Spec. No.: Bd.F.6 Page No. 91, Page No.38
a M-20
b M-25
c M-30
B Without SCADA with concrete mixer with hopper
a M-20
b M-25
c M-30
Providing and casting in situ cement concretespecified of trap/ granite / quartzite/ gneiss metal for
R.C.C. slabs and landings canopy as per detailed
designs and drawings including plywood/steel
centering, formwork, cover blocks compacting and
roughening the surface if special finish is to be
provided and curing complete. (Excluding
reinforcement).With.........
Spec. No.: Bd.F.8 Page No. 93
A With SCADA with fully automatic micro processor
based PLC with SCADA enabled reversible Drum
Type mixer
a
b
c
M-20
M-25
M-30
19
Description
Unit
2
B Without SCADA with concrete mixer with hopper
a
b
c
M-20
M-25
M-30
Providing & casting in situ cement concrete
of.. specified grade of trap/ granite/ quartzite/ gneiss
metal for R.C.C. chajja as per detailed design &
drawings including centering, formwork, cover blocks
compacting & roughening the surface if special finish
is to be provided & curing complete. (Excluding
reinforcement).With .........
Spec. No.: Bd.F.9 Page No. 95
Cu.Mt.
Cu.Mt.
Cu.Mt.
7875.00
8067.00
8259.00
1904.00
1910.00
1917.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
8702.00
8894.00
9086.00
1848.00
1855.00
1860.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
8697.00
8889.00
9081.00
1889.00
1895.00
1901.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
9155.00
9347.00
9539.00
2198.00
2207.00
2213.00
M-20
M-25
M-30
Providing and casting in situ cement concrete
of. specified. grade of trap/ granite/ quartzite/ gneiss
metal for R.C.C. pardi 75mm thick fins including
centering, formwork, cover blocks compacting and
roughening them if special finish is to be provided and
curing complete. (Excluding reinforcement).with .........
Spec. No.: Bd.F.11 Page No. 96
20
Description
Unit
2
Without SCADA with concrete mixer with hopper
M-20
M-25
M-30
Providing and casting in situ cement concrete
of. specified grade of trap/ granite/ quartzite/ gneiss
metal for R.C.C.coping to plinth or parapet amd sill
of doors and windows moulded as per detailed
drawings or chamfered as approved by the Engineer
including centering, formwork, cover blocks
compacting and roughening them if special finish is to
be provided and curing complete. (Excluding
reinforcement).With.........
Spec. No.: Bd. F. 12 Page No. 96 & B-7, Pg 38
Cu.Mt.
Cu.Mt.
Cu.Mt.
9150.00
9342.00
9534.00
2245.00
2213.00
2260.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
5893.00
6085.00
6277.00
1028.00
1032.00
1035.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
5888.00
6080.00
6272.00
1065.00
1067.00
1070.00
M-20
M-25
M-30
Providing and casting in situ cement concrete
of. specified grade of trap/ granite/ quartzite/ gneiss
metal for R.C.C.waist slab steps & parapets to plinth
or parapet amd sill of doors and windows moulded as
per detailed drawings or chamfered as approved by
the Engineer including centering, formwork, cover
blocks compacting and roughening them if special
finish is to be provided and curing complete.
(Excluding reinforcement).with.........
Spec. No.: Bd. F. 13 Page No. 97 & B-7, Pg 38
21
10
Description
Unit
2
A With SCADA with fully automatic micro processor
based PLC with SCADA enabled reversible Drum
Type mixer
a M-20
b M-25
c M-30
B Without SCADA with concrete mixer with hopper
a M-20
b M-25
c M-30
Providing and fixing in position after hoisting, precast
1:2 cement mortar reinforcement Jali 50mm thick of
approved design cement mortar 1:3 and curing
complete (including 6mm diameter mild steel bar
reinforcement).
Spec. No.: Bd. F. 20 Page No. 100
Providing and fixing in position............ bar
reinforcement of of TATA TISCON /SAILl /JSW
/ESSAR or equivalent make (condirming to IS code)
of various diameters for R.C.C. pile caps, footings,
foundations, slabs, beams columns, canopies,
staircase, newels, chajjas, lintels pardis, copings, fins,
arches etc. as per detailed designs, drawings and
schedules. including cutting, bending, hooking the
bars, binding with wires or tack welding and
supporting as required including cover block etc.
complete.
Spec. No.: Bd.F.17, Page No. 98
a
b
TMT- Fe-500/Fe-415
Mild Steel
22
Cu.Mt.
Cu.Mt.
Cu.Mt.
8284.00
8476.00
8668.00
1918.00
1925.00
1932.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Sq.Mt.
8279.00
8471.00
8663.00
674.00
1962.00
1973.00
1976.00
74.00
M.T.
M.T.
70159.00
54784.00
6802.00
5400.00
12
Description
Unit
2
Providing and casting in situ c.c. specified garde of
trap metal for RCC Pile caps as per detailed design
and drawing or as directed including dewatering if
necessary, centering, formwork, cover blocks
compacting, finishing the form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth and even
surface or roughening them if special finish is to be
provided and curing complete (Excluding
reinforcement). With.............
Spec. No.: Bd. F1. Page No. 98
Cu.Mt.
Cu.Mt.
Cu.Mt.
5877.00
6069.00
6259.00
1047.00
1050.00
1050.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
No.
5872.00
6064.00
6254.00
236.00
1088.00
1090.00
1090.00
19.00
23
Description
Unit
2
Providing and laying in position Ready mix
concrete for rainforced cement concrete with crushed
sand, for in ............. work, of .........grade cement
content as per approved design mix, and
manufactured in fully automatic batching plant and
transported to site of work in transit mixer for all leads,
having continuous agitated mixer, manufactured as
per mix design of specifiied grade for reinforced
cement concrete work including pumping of R.M.C.
from transit mixer to site of laying, including the cost of
plywood/steel centering, shuttering , compacting and
curing including cost of admixtures in recommendeed
proportion aas per IS : 9103 to accelerate /retard
setting of concrete, improve workability without
impairintg strength and durability as per direction of
the Engineer - in - charge. (With SCADA with fully
automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer ) (Prior
permission of S.E.is essential)
Spec. No. Bd. F 3 page No.89
Cu.Mt.
Cu.Mt.
Cu.Mt.
4939.00
5129.00
5319.00
585.00
588.00
593.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7036.00
7223.00
7410.00
818.00
820.00
821.00
Cu.Mt.
Cu.Mt.
7202.00
7389.00
809.00
811.00
i
ii
iii
B
i
ii
iii
C
i
ii
24
ITEM
NO.
Description
Unit
3
Cu.Mt.
4
7576.00
5
813.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7540.00
7727.00
7914.00
839.00
828.00
830.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
7944.00
8131.00
8318.00
826.00
828.00
830.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
5453.00
5640.00
5826.00
650.00
650.00
650.00
iii M-30
D For Slabs & Landings
Spec. No.: Bd.F.8 Page No. 93
i M-20
ii M-25
iii M-30
E For Waist Slabs , steps and parapit
Spec. No.: Bd.F.13 Page No.97
i M-20
ii M-25
iii M-30
F For Pile Caps
Spec. No.: Bd.F.6 Page No.87
i M-20
ii M-25
iii M-30
25
Bd - G : Brick Masonary
ITEM
NO.
Description
Unit
2
Providing second class Burnt Brick masonry with
conventional/ I.S. type bricks in cement mortar 1:6 in
foundations and plinth of inner walls/ in plinth
external walls including bailing out water, striking
joints on unexposed faces, raking out joints on
exposed faces and watering Complete.
Spec. No.: Bd.G. 1 Page No. 265
3
Cu.Mt.
4
4917.00
5
827.00
Cu.Mt.
5103.00
951.00
Cu.Mt.
4804.00
707.00
Cu.Mt.
4984.00
856.00
Sq.Mt.
675.00
99.00
1
1
26
Bd - G : Brick Masonary
ITEM
NO.
1
6
10
Description
Unit
2
Providing Burnt Brick-on-edge in half brick thick
wall masonry with second class bricks of
conventional type bricks in cement mortar 1:3
including mild steel longitudinal reinforcement of 2
bars of 6mm diameter / one strips of hoop iron 25
mm X 1.6 mm placed at every third course, properly
bent and bonded at ends, scaffolding, raking out
joints and watering complete.
Spec. No.: Bd.G.8 Page No. 270
Providing first class Burnt Brick masonry with
conventional / I.S. type bricks in cement mortar 1:4
including scaffolding, racking joints pointing in C.M.
1:3 and watering in pillars of rectangular or
square shape as shown on the drawing or as
directed complete.
Spec. No.: Bd.G.9 (a) Page No. 270
Providing first class Brick masonry with conventional
/ IS. type bricks in cement mortar 1:4 including
scaffolding, racking out joints pointing in C.M 1:3
and watering in pillars of curved shapes, as
shown on the drawing or as directed complete.
Spec. No.: Bd.G.9 (b) Page No. 270
3
Sq.Mt.
4
546.00
Cu.Mt.
5357.00
1254.00
Cu.Mt.
5443.00
1175.00
Cu.Mt.
5086.00
935.00
Cu.Mt.
5115.00
872.00
27
5
98.00
Bd - G : Brick Masonary
ITEM
NO.
1
11
Description
Unit
2
Providing fly ash brick masonry with conventional /
I.S. type fly ash brick in cement mortar 1:6 including
striking joints, racking out joints watering and
scaffolding complete. For foundation & plinth
BDG- 1&2 page 265 and
3
Cu.Mt.
4
5130.00
5
1693.00
Cu.Mt.
5189.00
1679.00
13
Sq.Mt.
810.00
120.00
28
Bd - H : Stone Masonary
ITEM
NO.
1
1
Description
Unit
2
Providing uncoursed rubble masonry of trap /
granite / quartzite / gneiss stones in cement
mortar 1:6 in foundation and plinth of inner
walls / in plinth of external walls including bailing
out water, striking joints on un exposed faces and
watering complete.
Spec. No.: Bd.H.1 Page No. 293
Providing uncoursed rubble masonry of trap /
granite / quartzite / gneiss stones in cement
mortar 1:5 in basements including scaffolding,
bailing out water, racking out joints when
plastering is to be done striking joints where no
pointing or plastering is to be done and watering
complete.
Spec. No.: Bd.H.2 Page No. 293
Providing uncoursed rubble masonry of trap /
granite / quartzite / gneiss stone in cement mortar
1:3 in basement with patent water proofing
compound added to it at rate of 1 kg per bag of
cement including bailing out water, scaffolding
racking out joints when plastering is to be done
and watering complete.
Spec. No.: Bd.H.3 Page No. 294
Providing uncoursed rubble masonry of trap /
granite / quartzite / gneiss stones in cement
mortar 1:6 in superstructure including racking
out joints when plastering is to be done / striking
joints when no plastering is to be done watering
and scaffolding complete.
Spec. No.: Bd.H.4 Page No. 296
Providing random rubble masonry second sort of
trap / granite / quartzite / gneiss stones in cement
mortar 1:6 in plinth including bailing out water ,
striking joints on unexposed faces. (Excluding
pointing) complete.
Spec. No.: Bd.H.5 Page No. 296
3
Cu.Mt.
4
2930.00
5
1041.00
Cu.Mt.
3091.00
1168.00
Cu.Mt.
3576.00
987.00
Cu.Mt.
3260.00
911.00
Cu.Mt.
3012.00
1089.00
29
Bd - H : Stone Masonary
ITEM
NO.
Description
Unit
2
Providing random rubble masonry second sort of
trap / granite / quartzite / gneiss stones in cement
mortar 1:6 in superstructure racking out joints
when plastering is to be done / striking joints
when no pointing or plastering is to be done on
the inside watering and scaffolding complete.
Spec. No.: Bd.H.6 Page No. 296
3
Cu.Mt.
4
3225.00
5
1228.00
Cu.Mt.
3297.00
1388.00
Cu.Mt.
3433.00
1490.00
Cu.Mt.
6201.00
1260.00
10
Cu.Mt.
6460.00
1443.00
1
6
30
Bd - H : Stone Masonary
ITEM
NO.
Description
Unit
2
Providing coursed rubble masonry first sort of trap
/ granite / quartzite / gneiss stones in cement
mortar 1:6 in external work of plinth including
bailing out water, striking joints inside and
watering complete.
Spec. No.: Bd.H.13 Page No. 299
3
Cu.Mt.
4
6381.00
5
1633.00
12
Cu.Mt.
6852.00
1752.00
13
Cu.Mt.
6955.00
2282.00
1
11
31
Bd - I : Block Masonary
Final Rate (2015-16)
Completed
Labour
ITEM
NO.
Description
Unit
Sq.Mt.
508.00
168.00
Sq.Mt.
717.00
215.00
Cu.Mt.
3747.00
583.00
32
Bd - J : Water Proofing
ITEM
NO.
1
Description
Unit
2
Providing and laying damp proof course 50mm
thick in (1:2:4) cement concrete layer and bitumen
/ using cement with waterproofing compound
curing, formwork etc. complete.
Spec. No.: Bd.J.2 Page No. 337
3
Sq.Mt.
4
274.00
5
44.00
Sq.Mt.
149.00
9.00
Ltr.
21.00
7.00
Sq.Mt.
474.00
0.00
33
Bd - J : Water Proofing
ITEM
NO.
1
Description
Unit
2
cement bag including all lead, lifts & laid to proper
slope to drain off water entirely including watta at
the junction of parapet and work up to a height of
30 cm. or as directed and including finishing the
top layer of water proofing treatment with false
marking of 30 x30 cm. or as directed and covering
the whole treatment with 7 years guarantee on
requisite stamp paper etc. complete.
Spec. No.: As directed by Engineer in charge.
Sq.Mt.
309.00
173.00
Sq.Mt.
11.00
11.00
Sq.Mt.
607.00
264.00
Sq.Mt.
750.00
42.00
34
Bd - J : Water Proofing
ITEM
NO.
1
Description
Unit
2
on perfectly clean surface (free from loose dust
and foreign matter) application of 1st coat of
Polydee-LM @ 700 gms/sqm and applying 2nd
coat of Polydee-LM @ 700 gms/sqm and finishing
the same with sprinkling the AG-10 granules on
the wet coating. (After finishing covering the
treatment with 25mm cement plaster for protection
with fibrillated 6mm Plyplast fibre @ 125 gms/sqm
to be paid in separate item.) covering 7 years
guarantee on Court Fee Stamp Paper of Rs. 100/etc. complete.
Spec. No.: As directed by Engineer in charge
Sq.Mt.
664.00
54.00
10
Sq.Mt.
797.00
0.00
35
Bd - J : Water Proofing
ITEM
NO.
1
10
11
Description
Unit
2
with 7 years guarantee on court fee stamp of
Rs.100/- with ponding test etc complete.
(excluding Cement concrete 1:3:6 base concrete )
( prior permission of SE shall be obtained before
inclusion of item )
Spec. No.: Bd.J.2 Page No. 337
Sq.Mt.
728.00
149.00
Sq.Mt.
835.00
334.00
36
Bd - J : Water Proofing
ITEM
NO.
1
13
14
Description
Unit
2
Providing and applying required coats of a water
based UV resistant Evercrete Top Seal sealant to
protect natural stone, bricks, concrete and wooden
structures from water intrusion and staining due to
water penetration and algae formation etc
complete.
Spec. No.: As directed by Engineer in charge.
3
Sq.Mt.
4
294.00
5
55.00
Sq.Mt.
483.00
63.00
Sq.Mt.
238.00
100.00
16
Sq.Mt.
240.00
149.00
37
Bd - J : Water Proofing
ITEM
NO.
1
17
18
Description
Unit
2
Providing waterproofing in W.C. and bath
including brick bat coba in all positions consisting
of specialised materials as per IS Standard and
covering 7 years guarantee including all leads, lifts
etc. complete.
Spec. No.: As directed by Engineer-in-charge
3
Cu.Mt.
4
2790.00
5
72.00
Sq.Mt.
549.00
0.00
38
Bd - J : Water Proofing
ITEM
NO.
1
19
Description
Unit
2
Providing and laying 140-160 gsm geo-textile
fleece on top of Dr Fixit Solyseal.For protection of
waterproofing treatment screed / brick bat coba /
china mosaic / light weight concrete to be provided
at extra cost as per site requirement. Note: The
above jobs is to be done by the authorised
applicator of the manufacturer / authorised (PWD)
distributor with guarantee on bond paper for five
years
Spec. No.: As directed by Engineer-in-charge
For RCC Slab : Mechanically clean the RCC slab
and wall with wire brush / coir brush to free from
all loose materials like dust, dirt etc. Make wattah /
coving of 50x50 mm at all horizontal & vertical
joints to avoid right angle turning. Seal all
honeycombs, pin holes, joints, pipe outlets with
Polymer Modified Mortar. Providing and applying
one coat primer with Dr Fixit Torchshield
Primer(or equivalent Texsa / FOSROC / STP).
Solvent based bitumen modified primer
conforming to ASTM D-41 to be used to seal and
prepare the substrate prior to the installation of
Dr.Fixit Torchshield (or equivalent Texsa / BASF /
FOSROC / STP). Providing and applying Dr Fixit
Torchshield (with elongation break up as per EN12311-1 = L-40% T-40%, Tensile strength (N/5cm)
= L-700 & T=450, Tear strength as per ASTM
D5147 = L-300 N & T-250N, Cold flexibility as per
EN-1109 (upto2o C) = -5, Softening point as per
EN-1110 (oC) <150, water absorption as per EN1928 = -0.15% Max) (or equivalent Texsa /BASF /
FOSROC / STP).with proper alignment and
minimum overlap of100MM with proper application
39
Bd - J : Water Proofing
ITEM
NO.
Description
Unit
20
3 mm thick
Sq.Mt.
399.00
0.00
ii
4 mm thick
For Wall & Parapit : Mechanical cleaning of
Surface and treating surface in sound, clean and
free from dirt, oil and other loose material and may
be done with vacuum cleaning if required. All
surface cracks upto 5mm width will be filled up
with Dr.Fixit Crack X Paste or similar material.
The external surface will be primed with Dr.Fixit
Primeseal(or equivalent BASF / FOSROC /
STP) diluted with potable water in the ratio of
2:1 by volume prior to application of Dr.Fixit
Raincoat . Allow it to dry for at least 2 to 3 hours
and then apply Dr.Fixit Raincoat or Equivalent
(BASF / FOSROC / STP) having DFT of 110
micron, elongation of > 100% as per ASTM D41202 and algae & fungal resistance as per SS 3451998. Accelerated weathering ( 2000 Hrs UV
Exposure)as per ASTM D4587 No defects ) in 2
coats by brush, roller or spray with an interval of 5
to 6 hrs. Allow it to air cure for 7 days and (do not
dilute Dr.Fixit Raincoat by any means). Note:
The above jobs is to be done by the authorised
applicator of the manufacturer / authorised (PWD
distributor with guarantee on bond paper for five ye
Spec. No.: As directed by Engineer-in-charge
Sq.Mt.
Sq.Mt.
498.00
249.00
0.00
0.00
40
Bd - J : Water Proofing
ITEM
NO.
1
21
22
Description
Unit
2
vaccum cleaning if required. All surface cracks
upto 5mm width will be filled up with Dr.Fixit
Crack X Paste (or equivalent BERGER/ ASAIN /
BASF / FOSROC / STP) . The external surfaces
will be primes with Dr.Fixit Primeseal(or
equivalent BASF / FOSROC / STP) diluted with
potable water in the ratio of 2:1 by volume
prior to application of Dr.Fixit Newcoat or
equivalent ( BASF / FOSROC / STP) . Allow it to
dry for at least 2 to 3 hours and then apply Dr.Fixit
Newcoat (As per technical data enclosed with
BOQ)Apply three coats of Newcoat with different
shades colors for better monitoring with time
interval of 6-8 hrs between each coat.The
application of each coat shall be in perpendicular
direction to the subsequent coat. Allow Newcoat to
air cure for 3 to 4 days before subjecting to use /
foot traffic. Allow it to air cure for 7 days and (do
not dilute Dr.Fixit Newcoat by any means). Note:
The above jobs is to be done by the authorised
applicator of the manufacturer / authorised (PWD)
distributor with guarantee on bond paper for five
years
Spec. No.: As directed by Engineer-in-charge
3
Sq.Mt.
4
749.00
Sq.Mt.
799.00
41
5
0.00
0.00
Bd - J : Water Proofing
ITEM
NO.
1
Description
Unit
2
membrane comprising of polymerised bitumen,
sandwiched between plastic released films on
either side, then usingDr.Fixit Pidigrout 5M(
expansive, non-shrinking grout) in the gaps
around the plumbing pipes where bathseal tape
has been used, after attaining a SSD condition.
Making first coat of Dr Fixit Pidifin 2K(or
equivalent BASF / FOSROC / STP) (Sp.Gravity
@30 Degree, g/cc is 1.65+ 0.10 / Abrasion
resistance, cm/km is 0.09 / rapid chloride
permeability reduction in chloride ion penetration,
is 90% as per ASTM C 1202: 1997 / properly
rendered, cleaned RCC slab &side walls with
brush and allow it to dry for 6-8 hrs. After drying of
first coat, apply second coat and sprinkled coarse
sand on vertical surface. The Pidifin 2K Coating
should continue up to 4 feet above finished floor
level. Allow 24 hrs for full cure. Apply 12-15 mm
waterproof plaster on slab & vertical surface
before admixed with Dr Fixit Pidiproof
LW+(or equivalent BASF / FOSROC / STP)
IS2645 Dosage200ml per bag of cement. Cure the
surface with water. Note: The above jobs is to
be done by the authorised applicator of the
manufacturer / authorised (PWD) distributor with
guarantee on bond paper for five years
Spec. No.: As directed by Engineer-in-charge
23 a
42
Bd - J : Water Proofing
ITEM
NO.
1
Description
Unit
2
Providing and applying one coat primer with Dr
Fixit Torchshield Primer (or equivalent Texsa /
FOSROC / STP). Solvent based bitumen
modified primer conforming to ASTM D-41 to be
used to seal and prepare the substrate prior to the
installation of Dr.Fixit Torchshield Mineral Finish
Green Color (or equivalent Texsa / BASF /
FOSROC / STP). Providing and applying Dr Fixit
Torchshield Mineral Finish Green Color (with
elongation break up as per EN-12311-1 = L-40% T40%, Tensile strength (N/5cm) = L-700 & T=450,
Tear strength as per ASTM D5147 = L-300 N
& T-250N, Cold flexibility as per EN-1109 (upto2o
C) = -5, Softening point as per EN-1110 (oC)
<150, water absorption as per EN-1928 = -0.15%
Max) (or equivalent Texsa /BASF / FOSROC /
STP).with
3 mm thick
Sq.Mt.
418.00
0.00
ii
4 mm thick
Sq.Mt.
519.00
0.00
43
Bd - J : Water Proofing
ITEM
NO.
1
24
Description
Unit
2
Fixing of Dr Fixit Waterbar SW2020(or equivalent
BASF / FOSROC / STP) on all construction joints
like slab & wall, lift joints etc during concreting
work is on. Mechanically clean the RCC slab and
wall with wire brush / coir brush to free from all
loose materials like dust, dirt etc. Seal all
honeycombs, pin holes, joints with Polymer
Modified Mortar attain SSD condition.Apply first
coat of Dr Fixit Pifin2k(or equivalent BASF /
FOSROC / STP) rapid chloride permeability
reduction in chloride ion penetration, is 90% as
per ASTM C 1202: ]on properly rendered, cleaned
RCC slab & wall with brush and allow it to dry for 68 hrs.After drying of first coat apply second coat
and sprinkled coarse sand on vertical surface.
Allow 24 hrs for full cure.Apply waterproof screed
concrete 30-40
mm on floor and 12-15 mm waterproof plaster on
vertical surface before admixed withDr Fixit
Pidiproof LW+(or equivalent BASF / FOSROC /
STP) IS : 2645 : as per standard)@ 200ml per
bag of cement. Cure the surface with water. Clean
the surface with wire brush to remove all loose
dust, dirt etc.Saturate the surface with water to
reach SSD condition. Apply two coats of Dr Fixit
Safeguard(or equivalent BASF / FOSROC / STP)
((pot life at30C, hrs is 60-75, Surface drying time
at 30C as per ASTM D-1649 6-8,Water absorption
as per ASTM C 870:90 NIL, Food Grade
certification PASSES-Ref- USFDA-175-300,
Antifungal Activity as per EN 15458-06 ) by brush
on SSD floor & wall by brush on an interval of 6-8
hrs in between 2 coats. Allow the surface for full
cure of 24 hours before use.
Spec. No.: As directed by Engineer-in-charge
44
3
Sq.Mt.
5
0.00
Bd - K : Expansion Joints
ITEM
NO.
Description
Unit
2
Providing expansion joints in R.C.C. framed
structure (interior column) with plain premoulded
filler 25 mm thick including fixing T.W. battens on
both faces and finishing as directed etc. Complete.
Spec. No.: Bd.K.1 Page No. 357
3
Sq.Mt.
4
2851.00
5
433.00
Sq.Mt.
3332.00
386.00
Sq.Mt.
3824.00
509.00
Sq.Mt.
3865.00
442.00
Sq.Mt.
4518.00
639.00
1
1
45
Bd - K : Expansion Joints
ITEM
NO.
1
6
Description
Unit
2
Providing expansion joints in R.C.C. framed
structure (exterior column) with plain premoulded
filler 25 mm thick with 40 mm wide and 1 mm thick
stainless steel plate, hold fast, fixing T.W.
battens on internal face and finishing etc.
complete.
Spec. No.: Bd.K.1 B Page No. 357
Providing expansion joints in R.C.C. framed
structure (at floor level) with plain premoulded
filler 25 mm thick with 40 mm wide and 1 mm thick
stainless steel plate, hold fast, fixing T.W.
battens of internal face and finishing etc.
complete.
Spec. No.: Bd.K.1 C Page No. 357
Providing expansion joints in R.C.C. framed
structure (at Terrace level) with premoulded filler
25 mm thick with 40 mm wide and 1 mm thick
stainless steel plate as required, bitumen poured
filler and fixing T.W. battens on inner faces
finishing etc. complete as directed.
Spec. No.: Bd.K.1 D Page No. 357
3
Sq.Mt.
4
5015.00
5
675.00
Sq.Mt.
4491.00
578.00
Sq.Mt.
4575.00
482.00
R.Mt.
1239.00
134.00
46
Bd - K : Expansion Joints
ITEM
NO.
1
10
Description
Unit
2
Providing and fixing of BITUFLEX CLOSE CELL
FOAM of size 30 mm x 30 mm in double layer in
the expansion joints in R.C.C. framed structure
(Exterior column) with closed cell foam , applying
TP-40 PRIMER on both the sides of concrete
surface, filling the 25 mm x 25 mm gap with the
POLYSEAL, highly flexible sealant and covering
the joint with Polydee- LM, 150 mm width in 2
coats and fixing the aluminium plate of 100 mm
wide and 3 mm thick on external face of column
etc. complete.
Spec. No.: As directed by Engineer in charge.
3
R.Mt.
47
5
147.00
Unit
3
Sq.Mt.
98.00
69.00
Sq.Mt.
104.00
70.00
Sq.Mt.
139.00
80.00
Sq.Mt.
148.00
80.00
Sq.Mt.
157.00
80.00
Sq.Mt.
251.00
136.00
Sq.Mt.
261.00
136.00
Sq.Mt.
284.00
139.00
Sq.Mt.
311.00
191.00
48
Unit
3
Sq.Mt.
Sq.Mt.
336.00
197.00
Sq.Mt.
347.00
197.00
Sq.Mt.
35.00
25.00
Sq.Mt.
95.00
73.00
b stone masonry
Sq.Mt.
89.00
69.00
49
Unit
3
Sq.Mt.
Sq.Mt.
120.00
89.00
12
Sq.Mt.
95.00
74.00
13
Sq.Mt.
48.00
35.00
14
R.Mt.
20.00
19.00
15
R.Mt.
18.00
12.00
b 100 mm
c 150 mm
R.Mt.
R.Mt.
26.00
38.00
18.00
18.00
R.Mt.
92.00
6.00
16
50
Unit
3
Sq.Mt.
18
Sq.Mt.
172.00
32.00
19
Sq.Mt.
832.00
0.00
51
Description
Unit
2
applying the mortar with steel float on the surface
in proper evenness applying at coat of white
cement and lime to set a smooth finish then
applying a thin coat of slurry made of white
cement and black oxide colour in required
proportion by the steel float to get black streaks
on the surface and curing the surface for two
days including all materials and labour etc.
complete. (Prior approval of Superintending
Engineer is Necessary)
Spec. No.: As directed by Engineer in Charge.
20
Sq.Mt.
330.00
133.00
21
Sq.Mt.
373.00
197.00
52
53
Unit
3
Sq.Mt.
Unit
3
a 25mm to 30mm
b 30mm.to 45 mm.
c 50mm to 60mm
Providing and laying Polished Shahabad Stone
flooring 25mm to 30mm thick and required width
wide in plain/ diamond pattern on a bed of 1:6 C.M.
including cement float, filling joints, with neat cement
slurry, curing, polishing and cleaning complete.
Spec. No.: Bd.M.3 Page No. 383
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
471.00
527.00
591.00
559.00
126.00
132.00
136.00
176.00
Sq.Mt.
696.00
234.00
R.Mt.
R.Mt.
70.00
105.00
21.00
32.00
54
Description
Unit
2
Providing and laying Semipolished Kota stone
flooring over 20mm (average) thick and required
width in plain/ diamond pattern on bed of 1:6 Cement
mortar including cement float, filling joints with neat
cement slurry with pigment to match the shade
curing, polishing and cleaning complete. (Without
Polished)
Spec. No.: Bd.M.3 Page No. 383
Providing and laying Polished Kota stone flooring
With Hand Cut Polished Kota Stones 25mm to
30mm thick and required width in plain/diamond
pattern on bed of 1:6 Cement mortar including
cement float, filling joints with neat cement slurry,
curing, cleaning and Mirror Polishing complete.
Specifications: Bd.M.3 Page No. 380
Spec. No.: Bd. M-3 page No. 383
3
Sq.Mt.
55
Sq.Mt.
1456.00
431.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
105.00
156.00
648.00
19.00
28.00
345.00
10
11
Description
Unit
2
Providing and laying polished machine cut Kota
stone slabs 20 mm (average) thick for treads and
risers of steps and staircases, with rounded nosing
and antiskid lining for the treads on a bed of 1:4
cement mortar including cement float, filling joints
with neat cement slurry, curing, if required hand
polishing and cleaning complete.
Spec. No.: Bd.M.22 Page No. 395
3
Sq.Mt.
Sq.Mt.
Sq.Mt.
799.00
863.00
211.00
209.00
Sq.Mt.
863.00
280.00
Sq.Mt.
927.00
294.00
56
13
14
Description
Unit
2
Providing and laying Ceramic tiles of Somany/RAK/
Kajaria/ Nitco/ Asian or equivalent make having size
.............. cm of first quality (thickness to be specified
by the manufacturer )and conforming to IS 156222006 for flooring in required position laid on a bed
of 1:4 cement mortar including cement float, filling
joint with white/colour cement slurry cleaning curing
complete. Spec. No.: BdF-13 Page No. 389
Spec. No.:As directed by Engineer-in-Charge.
a 30cm x 30 cm
b 45cm x 45 cm
c 60cm x 60 cm
Providing and laying Ceramic Antiskid tiles of
Somani/RAK/Kajaria / Nitco / Asian or equivalent
make of size 30 cm x 30 cm of first quality(thickness
to be specified by the manufacturer ) and confirming
to IS 15622-2006 for antiskid flooring in required
position laid on a bed of 1:4 cement mortar including
cement float, filling joint with cement slurry cleaning
curing complete. Specifications: Bd. M-12 Spec. No.:
BdF-13 Page No. 389
Providing and laying Ceramic mat finish tiles of
Somani/ Kajaria/ Nitco/ Jonson or equivalent make
(conforming to IS 15622) of first quality having size
60 cm x 60 cm of approved colour for flooring in
required position laid on a bed of 1:4 cement mortar
including cement float, filling joint with white/colour
cement slurry cleaning curing complete.
Spec. No.:As directed by Engineer-in-Charge.
57
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
909.00
1124.00
1292.00
1030.00
274.00
288.00
254.00
483.00
Sq.Mt.
1312.00
274.00
a
b
c
d
e
16
17
Description
Unit
2
Providing and laying ceramic tiles of
Somani/RAK/Kajaria / Nitco /Asian or equivalent
make of first quality ,having size 30 cm. x 30 cm. for
dado and skirting in required position with
readymade adhesive mortar of approved quality on
plaster of 1:3 cement mortar including joint filling with
white/ colour cement slurry cleaning curing
complete.
Spec. No.:As directed by Engineer-in-Charge.
Spec. No.: BdM-13 Page No. 389
30cm x 30 cm
30cm x 45 cm
45cm x 45 cm
30cm x 60 cm
60cm x 60 cm
Providing and laying Ceramic mat finish tiles of
Somani/RAK/ Kajaria/ Nitco/ Asian or equivalent
make conforming to IS 15622 first quality (thickness
to be specified by the manufacturer ) having size 60
cm x 60 cm of first quality of approved colour for
skirting & dado in required position on plaster of 1:3
cement mortar including cement float, filling joint with
white/colour cement slurry cleaning curing complete.
Spec. No.: BdM-13 Page No. 389
58
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
964.00
1151.00
1230.00
1028.00
1301.00
343.00
343.00
405.00
220.00
430.00
Sq.Mt.
787.00
385.00
19
20
Description
Unit
2
Providing and laying vitrified ...........finish decorative
type Somani/RAK/ Kajaria/ Nitco/ Asian or
equivalent make first quality tiles having
size.............cm (thickness to be specified by the
manufacturer )and confirming to IS. 15622-2006 of
approved shade and pattern for flooring in required
position laid on a bed of 1:4 cement mortar including
neat cement float, filling joints, curing and clearing
etc. complete. (Prior Approval of SE is necessary)
Spec. No.: Bd.M. 12 Page No.389
Sq.Mt.
Sq.Mt.
Sq.Mt.
1410.00
1470.00
1730.00
258.00
100.00
134.00
a 100mm.
b 150mm.
Providing and laying vitrified matt finish tiles of
Somani/RAK/ Kajaria/ Nitco/ Asian or equivalent
make of first quality having size 590 mm to 605 mm
x to 605 mm (thickness to be specified by the
manufacturer )and confirming IS. 15622-2006 of
approved shade and pattern for skirting ...... mm in
required position laid on a bed of 1:4 cement mortar
including neat cement float, filling joints, curing and
cleaning etc. complete.
Spec. No.: Bd.M.12 Page No. 389
RMt.
RMt.
141.00
211.00
47.00
70.00
a 100 mm
Rmt.
147.00
31.00
59
Unit
3
RMt.
Rmt.
Rmt.
173.00
260.00
33.00
50.00
22
Sq.Mt.
1320.00
26.00
23
Sq.Mt.
1380.00
78.00
60
25
26
27
Description
Unit
2
Providing and laying in position flooring of
telephone black / Amba White / Cat bary brown / RBI
red / Ocean Brown granite stone of first quality
approved shade and size 18 mm to 20 mm thick on
bed 1:4 cement mortar including colour cement
slurry to match the colour of slab polishing ,curing
and cleaning etc. complete. (Excluding polishing)
.(prior approval of SE is essential) Spec. No.: Bd.M.
12 B/Page No. 389
3
Sq.Mt.
61
Rmt.
Rmt.
Sq.Mt.
315.00
472.00
2605.00
28.00
42.00
155.00
Sq.Mt.
2660.00
219.00
29
31
Unit
2
Providing sills of polished Kota stone 20 mm to
25mm thick, on a bed of 1:4 cement mortar including
cement float, filling joints with slurry, curing polishing
and cleaning complete.
Spec. No.: Bd.M.29 Page No. 397
a Kota stone
b Kadappa stone
Providing and fixing green marble of 18 to 20 mm
thick for door frame/window box frame etc. On
C.M. 1:6 including filling joints with polymer base
filler nosing the sharp edges wherever necessary,
curing, etc. complete.
Spec. No.: Bd. M. 12 Page No. 389
a
30
Description
green marble
Sq.Mt.
Sq.Mt.
1030.00
710.00
302.00
183.00
Sq.Mt.
2427.00
931.00
Sq.Mt.
3516.00
733.00
Sq.Mt.
767.00
198.00
Sq.Mt.
Sq.Mt.
832.00
1012.00
329.00
401.00
62
33
34
Description
Unit
2
Providing and fixing machine cut mirror ...................
polished 18 mm to 20 mm thick telephone black
granite / Amba White / Cat bary brown / RBI red /
Ocean Brown stone partition with rounding the
edges etc. complete. A) Both side polish
Spec. No.: Bd.M.35 B/Page No.399
Sq.Mt.
Sq.Mt.
Sq.Mt.
3326.00
3343.00
2508.00
578.00
578.00
635.00
Sq.Mt.
3243.00
383.00
63
Description
Unit
2
Providing and laying white / approved colour marble
slabs 20 mm thick of approved quality, colour and
veins, for treads and risers of steps and staircases
in one piece with round nosing & engraving three
lines for treads on bed of 1:4 cement mortar
including rounded nosing for the treads, neat cement
float, filling joints with cement slurry to match colour
of the slabs, curing, polishing and cleaning etc.
complete. (Prior approval of S.E. is necessary)
Spec. No.: BdM-26 Page No. 396
3
Sq.Mt.
36
Sq.Mt.
794.00
271.00
37
Sq.Mt.
316.00
134.00
64
39
40
41
Description
Unit
2
Providing treatment of TREMIX VACCUM
dewatering over cement concrete M-25 surface
.......... mm including fixing of M.S. channel
framework as per required size and placing of dowel
rods, vibrating the concrete by needle vibrator and
leveling by tremix double beam surface vibrator,
dewatering through sunction matt of tremix system,
power floating by skin floater and power trowelling to
obtain required level, surface cleaning including
procuring three phase tempoarary electric supply /
generator set if required at site for operating above
machinery etc. complete.(prior approval of SE is
nacessary) ( For Industrial Flooring)
Spec. No.: As directed by Engineer in charge
a 100 mm
b 150 mm
Providing and fixing 1.5 mm thick polyvenyl venyl
chloride flooring including leveling the base with
white cement including pasting with appropriate
material cleaning the surface etc. complete.
(As direced by Enquncer inchec)
Providing and fixing heavy duty inter locking
concrete Gray / Colour antiskid paving blocks of 60
mm thickness of having a strength of 300 kg/Sq.cm.
of approved quality and shape on a bed of crushed
sand of 25 to 40 mm thick including compacting,
cleaning etc. complete. (prior approval of SE is
essential)
Spec. No.: A directed by Engineer in charge
Providing and fixing heavy duty inter locking
concrete Gray / Colour antiskid paving blocks of 80
mm thickness of having a strength of 400 kg/Sq.cm.
of approved quality and shape on a bed of crushed
sand of 25 to 40 mm thick including compacting
cleaning etc. complete. (prior approval of SE is
essential)
Spec. No.: A directed by Engineer in charge
65
Sq.Mt.
Sq.Mt.
Sq.Mt.
739.00
1070.00
477.00
70.00
104.00
8.00
Sq.Mt.
925.00
58.00
Sq.Mt.
1059.00
64.00
43
44
45
46
Description
Unit
2
Providing Half-round Moulding ( Full Moulding ) to
18 mm to 20 mm thick .. including
fine polishing and cleaning etc complete.
Specifications: As directed by Engineer-In- Charge
Spec. No.: As directed by Engineer-In- Charge
a granite stone
b Marble/Kota stone
Providing Quarter-round Moulding ( Half Moulding
) to 18 mm to 20 mm thick .. including
fine polishing and cleaning etc complete.
Specifications: As directed by Engineer-In- Charge
Spec. No.: As directed by Engineer-In- Charge
R.Mt.
R.Mt.
122.00
103.00
100.00
86.00
a granite stone
b Marble / Kota stone
Providing Chamfer Of Required size to
including fine polishing and cleaning
etc complete. Specifications: As directed by
Engineer-In- Charge
Spec. No.: As directed by Engineer-In- Charge
a granite stone
b Marble / Kota stone
Providing ... polishing to Kota/Tandoor Stone
including using all necessary stones and equipments
cleaning, washing etc. complete.for Flooring
Spec. No.: As directed by Engineer in charge.
R.Mt.
R.Mt.
99.00
79.00
82.00
66.00
R.Mt.
R.Mt.
54.00
41.00
43.00
33.00
a Mirror Polishing
b Standard Polishing
Providing Mirror polishing to mm
Kota/Tandoor Stone including using all necessary
stones and equipments cleaning, washing etc.
complete.for Skirting 100 mm
Spec. No.: As directed by Engineer in charge.
Sq.Mt.
Sq.Mt.
180.00
90.00
50.00
25.00
a 100 mm
b 150 mm
R.Mt.
R.Mt.
18.00
27.00
7.00
11.00
66
Description
Unit
2
Providing leather finished polishing to Granite
Stone slab by continuous grinding in 4 coats of
different bits to receive rough and matt finish
including buffing process before laying and fixing of
stone as per drawing and design, including cleaning,
washing and finishing etc. complete.
Spec. No.: As directed by Engineer in charge
Providing leather finished polishing to Marble
Stone slab by continuous grinding in 4 coats of
different bits to receive rough and matty finish
including buffing process before laying and fixing of
stone as per drawing and design, including cleaning,
washing and finishing etc. complete.
Spec. No.: As directed by Engineer in charge
3
Sq.Mt.
Sq.Mt.
373.00
106.00
49
RMt.
80.00
43.00
50
447.00
544.00
48
67
118.00
118.00
Bd - N : Wood Finishes
ITEM
Description
NO.
1
2
1
Providing and applying boiled linseed oil in one
coat, preparing the surface, scaffolding etc.
complete as directed.
Spec. No.: Bd. N. 1. 1 Page No. 409
2
Providing and applying boiled linseed oil in two
coats to the new wood work, including knotting,
preparing the surface, scaffolding etc. complete
as directed.
Spec. No.: Bd.N.1.1 Page No. 409
3
Providing and applying Wax polishing to the
new wood work including knotting, preparing
the surface, scaffolding etc. complete as
directed.
Spec. No.: Bd.N.1.2 Page No. 409
4
Providing and applying Wax polishing to the
old wood work including knotting, preparing the
surface, scaffolding etc. complete as directed.
Spec. No.: Bd. N. 1.2 Page No. 409
5
Unit
3
Sq.Mt.
Sq.Mt.
19.00
11.00
Sq.Mt.
25.00
20.00
Sq.Mt.
20.00
12.00
Sq.Mt.
55.00
36.00
Sq.Mt.
106.00
77.00
Sq.Mt.
17.00
5.00
Sq.Mt.
27.00
7.00
68
Bd - N : Wood Finishes
ITEM
Description
NO.
1
2
9
Providing and applying melamine polish of
required finish to the wood work by spray
machine including knotting and preparing the
even surface by scraping, applying French
polishing, scaffolding if required etc. complete.
Note:The work to be executed on pre-approval
of Superintending Engineer.
Spec. No.: As directed by Engineer-in charge.
69
Unit
3
Sq.Mt.
Bd - O : Oil Painting
ITEM
Description
NO.
1
2
1
Providing and applying two coats of lead/zinc
base oil paint/ bituminous paint of approved
colour and shade to new wood work and fiber
boards including preparing the surface, knotting,
scaffolding if necessary, excluding primer coat
complete.
Spec. No.: Bd.O. 1 Page No. 409
2
Providing and applying .............. of lead/zinc
base oil paint/ bituminious paint of approved
colour and shade to old wood work previously
painted and fiber boards including if necessary
scaffolding, preparing surface excluding primer
coat complete.
Spec. No.: Bd.0.2 Page No. 409
a one coat
b two coats
3
Providing & applying two coats of lead/zinc base
oil paint/ bituminious paint of approved colour to
new structural steel work and iron work in
buildings including scaffolding if necessary,
cleaning and preparing the surface. (excluding
primer coat).
Spec. No.: Bd.0.3 Page No. 409
4
Providing and applying ... of
aluminium paint of approved make to new
structural steel work in building and workshop
including scaffolding if necessary, cleaning and
preparing surface (excluding primer coat)
complete.
Spec. No.: Bd.0.4 Page No. 409
a one coat
b Two coats
5
Providing and applying two coats of synthetic
enamel paint of approved colour to new /old
structural steel work and wood work in buildings,
including scaffolding if necessary, cleaning and
preparing the surface (excluding primer coat)
complete.
Spec. No.: Bd.0.5 Page No. 409
70
Unit
3
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
27.00
41.00
50.00
6.00
12.00
13.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
43.00
61.00
54.00
9.00
16.00
16.00
Bd - O : Oil Painting
ITEM
Description
NO.
1
2
6
Providing and applying .............. of flat oil paint
of approved colour to the old structural steel
work and iron work previously painted in building
including scaffolding, if necessary, cleaning and
preparing surface(excluding primer coat)
complete.
Spec. No.: Bd.0.6 Page No. 406
a one coat
b Two coats
Providing and applying 2 coats of flat oil paint of
approved colour and shade to internal / external
plastered surfaces including scaffolding if
necessary, cleaning and preparing the surface
(excluding primer coat) complete.
Spec. No.: Bd.0.7 Page No. 409
Unit
3
Sq.Mt.
Sq.Mt.
Sq.Mt.
32.00
49.00
58.00
10.00
20.00
21.00
Sq.Mt.
41.00
17.00
Sq.Mt.
8.00
8.00
10
Sq.Mt.
19.00
4.00
71
Bd - O : Oil Painting
ITEM
Description
NO.
1
2
11
Providing and applying priming coat over
new/old steel and other metal surfaces including
preparing the surface by thoroughly cleaning oil,
grease, dirt and other foreign matter and scoured
with wire brushes, fine steel wool, scrappers and
sand paper, scaffolding etc. complete.
Spec. No.: As directed by En-gineer in charge.
Unit
3
Sq.Mt.
12
Sq.Mt.
17.00
5.00
13
Sq.Mt.
15.00
10.00
14
Sq.Mt.
212.00
98.00
15
Sq.Mt.
198.00
32.00
72
Bd - O : Oil Painting
ITEM
Description
NO.
1
2
16
Providing and applying two coats of Appex Ace
exterior paint of approved manufacture and of
approved colour to the plastered surfaces
including cleaning ,preparing the plaster surface
,applying primer coat ,scaffolding if necessary ,
and watering the surface for two days complete
Spec. No.: As directed by Engineer in charge.
17
73
Unit
3
Sq.Mt.
Sq.Mt.
130.00
33.00
a
b
a
b
3
Description
Unit
Sq.Mt.
Sq.Mt.
5.00
7.00
3.00
3.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
24.00
35.00
64.00
5.00
7.00
11.00
Sq.Mt.
4.00
4.00
Sq.Mt.
2.00
2.00
Sq.Mt.
17.00
9.00
74
Bd - Q : Wood Work
ITEM
NO.
1
1
a
b
Description
Unit
75
Sq.Mt.
Sq.Mt.
Cu.Mt.
2130.00
4080.00
90030.00
78.00
76.00
818.00
Cu.Mt.
37377.00
2887.00
Sq.Mt.
1960.00
127.00
Cu.Mt.
92320.00
18866.00
Cu.Mt.
48584.00
17797.00
Bd - Q : Wood Work
ITEM
NO.
1
7
Description
Unit
Cu.Mt.
Cu.Mt.
R.Mt.
86680.00
42969.00
720.00
8296.00
7956.00
251.00
Sq.Mt.
935.00
179.00
10
RMt.
433.00
101.00
R.Mt.
205.00
69.00
11
a
b
76
Bd - Q : Wood Work
ITEM
NO.
1
Description
Unit
12
R.Mt.
253.00
60.00
13
R.Mt.
533.00
101.00
R.Mt.
240.00
77.00
Sq.Mt.
2515.00
95.00
R.Mt.
390.00
70.00
Sq.Mt.
2730.00
828.00
14
15
16
17
77
Description
Unit
Sq.Mt.
692.00
53.00
Sq.Mt.
667.00
54.00
R.Mt.
155.00
54.00
Sq.Mt.
760.00
68.00
Sq.Mt.
674.00
67.00
78
Description
Unit
Sq.Mt.
443.00
73.00
R.Mt.
346.00
85.00
2290.00
1717.00
2262.00
215.00
229.00
194.00
a
b
9
120 cm
90 cm
Providing and fixing valley gutter of 24 B.W.G.
(0.63 mm) thick G.I. sheet 120 cm wide with 20 mm
thick teak wood planking underneath coal tarring
etc. complete.
Spec. No.: Bd. R. 10, Page No. 469
10
No.
453.00
25.00
11
No.
92.00
13.00
79
Description
Unit
12
Sq.Mt.
809.00
325.00
13
Sq.Mt.
625.00
365.00
80
Description
Unit
14
Sq.Mt.
1086.00
190.00
15
Sq.Mt.
688.00
237.00
16
Sq.Mt.
1449.00
438.00
17
Sq.Mt.
1541.00
385.00
81
Description
Unit
18
Sq.Mt.
1113.00
116.00
19
Sq.Mt.
1831.00
146.00
20
Sq.Mt.
1068.00
146.00
82
Description
Unit
Sq.Mt.
932.00
83
320.00
Description
Unit
Sq.Mt.
77.00
7.00
23
Sq.Mt.
28.00
3.00
24
Sq.Mt.
39.00
36.00
25
Sq.Mt.
38.00
37.00
26
Sq.Mt.
36.00
35.00
84
Description
Unit
Sq.Mt.
146.00
140.00
M.T.
1083.00
1041.00
29
R.Mt.
77.00
6.00
30
R.Mt.
58.00
6.00
31
Sq.Mt.
1717.00
77.00
32
No.
82.00
53.00
33
Sq.Mt.
571.00
94.00
27
28
85
Description
Unit
34
Sq.Mt.
842.00
45.00
35
R.Mt.
791.00
72.00
86
Description
Unit
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
1709.00
1943.00
2200.00
2472.00
1015.00
37
87
167.00
158.00
167.00
148.00
67.00
Description
Unit
38
R.Mt.
557.00
19.00
39
No.
818.00
130.00
88
Description
Unit
Cu.Mt.
105610.00
22341.00
Cu.Mt.
44968.00
15570.00
Sq.Mt.
1917.00
371.00
Sq.Mt.
2567.00
436.00
Sq.Mt.
1444.00
371.00
Sq.Mt.
2094.00
436.00
89
Description
Unit
No.
849.00
224.00
R.Mt.
658.00
221.00
R.Mt.
692.00
255.00
Rmt
386.00
85.00
90
Description
Unit
Rmt
436.00
85.00
Sq.Mt.
3829.00
765.00
Spec.
No.:
Bd-T-7
&
Page
No.
91
481-82
Description
Unit
10
Sq.Mt.
4336.00
926.00
11
Sq.Mt.
3897.00
747.00
12
Sq.Mt.
3260.00
574.00
92
Description
Unit
13
Sq.Mt.
3706.00
728.00
14
Sq.Mt.
4200.00
966.00
Sq.Mt.
3621.00
417.00
93
16
Description
Unit
Sq.Mt.
4490.00
1266.00
17
Sq.Mt.
4530.00
975.00
18
Sq.Mt.
3624.00
738.00
94
Description
Unit
19
Sq.Mt.
3100.00
400.00
20
Sq.Mt.
2436.00
241.00
21
Sq.Mt.
2735.00
415.00
22
Sq.Mt.
4380.00
919.00
95
Description
Unit
23
Sq.Mt.
3867.00
892.00
24
Sq.Mt.
3073.00
647.00
25
Sq.Mt.
2968.00
551.00
26
Sq.Mt.
2775.00
409.00
96
Description
Unit
27
Sq.Mt.
2570.00
471.00
28
Sq.Mt.
2250.00
310.00
29
Sq.Mt.
4664.00
440.00
97
Description
Unit
Sq.Mt.
5220.00
499.00
31
Sq.Mt.
4712.00
448.00
32
Sq.Mt.
2682.00
571.00
98
Description
Unit
33
Sq.Mt.
15460.00
4087.00
34
Sq.Mt.
11269.00
2060.00
99
Description
Unit
Sq.Mt.
3957.00
436.00
36
Sq.Mt.
4561.00
616.00
100
Description
Unit
101
Sq.Mt.
4760.00
634.00
Description
Unit
38
Sq.Mt.
3111.00
351.00
39
Sq.Mt.
4114.00
454.00
40
Sq.Mt.
Sq.Mt.
4727.00
3525.00
1930.00
1544.00
mechanical
a With
b Without mechanical gear
gear
102
Description
Unit
41
Sq.Mt.
2923.00
1108.00
42
Sq.Mt.
971.00
383.00
43
Sq.Mt.
881.00
348.00
44
Sq.Mt.
667.00
190.00
103
Description
Unit
45
Sq.Mt.
2212.00
975.00
46
Sq.Mt.
2015.00
712.00
47
Sq.Mt.
2216.00
447.00
48
Sq.Mt.
3050.00
841.00
104
Description
Unit
49
Sq.Mt.
2757.00
342.00
50
Sq.Mt.
1925.00
934.00
51
Sq.Mt.
2992.00
680.00
52
Sq.Mt.
3915.00
669.00
105
Description
Unit
53
Sq.Mt.
2390.00
503.00
54
Sq.Mt.
2771.00
617.00
55
Sq.Mt.
3441.00
457.00
56
Sq.Mt.
3945.00
502.00
106
Description
Unit
57
Sq.Mt.
2912.00
706.00
58
Sq.Mt.
3263.00
547.00
59
Sq.Mt.
2520.00
790.00
107
61
Description
Unit
Sq.Mt.
4759.00
473.00
Sq.Mt.
4227.00
418.00
Sq.Mt.
3213.00
332.00
Sq.Mt.
Sq.Mt.
3590.00
3213.00
363.00
332.00
Sq.Mt.
Sq.Mt.
4177.00
3979.00
455.00
429.00
62
powder
a With
b Without powder coating
coating
108
Description
Unit
63
Sq.Mt.
2470.00
675.00
64
Sq.Mt.
4211.00
774.00
109
Description
Unit
Sq.Mt.
3523.00
836.00
Sq.Mt.
4360.00
847.00
Sq.Mt.
3915.00
1135.00
Sq.Mt.
Sq.Mt.
4504.00
3990.00
717.00
652.00
Sq.Mt.
Sq.Mt.
4801.00
4090.00
1155.00
1061.00
65
110
67
Description
Unit
111
Sq.Mt.
Sq.Mt.
Sq.Mt.
6899.00
4927.00
3375.00
928.00
662.00
400.00
Description
Unit
68
Sq.Mt.
1256.00
304.00
69
Sq.Mt.
1455.00
418.00
70
Sq.Mt.
1651.00
517.00
71
Sq.Mt.
912.00
348.00
112
Description
Unit
72
Sq.Mt.
1521.00
515.00
73
Sq.Mt.
3824.00
460.00
Sq.Mt.
2197.00
428.00
Sq.Mt.
2591.00
665.00
74
75
113
Description
Unit
76
Sq.Mt.
2990.00
795.00
77
Sq.Mt.
1344.00
248.00
78
Sq.Mt.
1488.00
148.00
114
Description
Unit
79
Sq.Mt.
1584.00
351.00
80
Sq.Mt.
1280.00
109.00
81
Sq.Mt.
1684.00
124.00
115
Description
Unit
82
Sq.Mt.
1830.00
135.00
83
Sq.Mt.
583.00
175.00
84
Sq.Mt.
1157.00
46.00
85
Sq.Mt.
2230.00
342.00
116
Description
Unit
86
Sq.Mt.
3764.00
682.00
87
Sq.Mt.
1550.00
530.00
88
CMT
63980.00
10295.00
89
Sq.Mt.
527.00
92.00
90
Sq.Mt.
2285.00
2207.00
117
Description
Unit
91
Sq.Mt.
326.00
105.00
92
R.Mt.
111.00
23.00
93
Sq.Mt.
425.00
25.00
94
Sq.Mt.
482.00
103.00
Sq.Mt.
516.00
113.00
Sq.Mt.
436.00
120.00
Sq.Mt.
559.00
118.00
95
96
97
118
99
100
Description
Unit
119
Sq.Mt.
Sq.Mt.
R.Mt.
756.00
1403.00
977.00
71.00
120.00
50.00
99.00
50.00
Bd - U : Iron Work
Final Rate (2015-16)
Completed Labour
ITEM
NO.
Description
Unit
Sq.Mt.
Sq.Mt.
Sq.Mt.
1129.00
1414.00
58.00
181.00
184.00
5.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
1909.00
2163.00
2389.00
2677.00
151.00
172.00
190.00
212.00
15 kg/sq.m
20 kg./sq.m.
Add for extra weight or deduct for less weight per
kg. for fabricating such as cutting, shaping, rivetting
etc. mild steel for grill works including welding etc.
complete.
Spec.No. Bd. 1. U. Page No. 583/2012
Providing and fixing mild steel grill railing ----------with Ghana teak wood hand rail of size 75mm x 60
mm.and sill of 75mm.x 25 mm.and newel posts for
staircases, including fabricating, fix-tures, erecting,
painting the grill work with one coat of anti-corrosive
paint and two coats of oil painting with approved
colour and polishing the sill, hand rail and the newel
post with french polish.
Spec. No.: Bd.U.2 Page No. 583
a
b
c
d
15 kg./sq.m.
20 kg/sq.m
30 kg./sq.m.
35 kg/sq.m
120
ITEM
NO.
Description
Unit
R.Mt.
R.Mt.
R.Mt.
852.00
1118.00
1528.00
37.00
49.00
46.00
R.Mt.
R.Mt.
R.Mt.
345.00
429.00
489.00
114.00
133.00
134.00
R.Mt.
R.Mt.
R.Mt.
91.00
96.00
133.00
49.00
55.00
73.00
No.
No.
No.
No.
No.
No.
745.00
892.00
1492.00
1995.00
3207.00
4504.00
267.00
293.00
393.00
295.00
295.00
295.00
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
121
ITEM
NO.
Description
Unit
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
257.00
355.00
399.00
488.00
568.00
735.00
1128.00
1524.00
75.00
75.00
80.00
80.00
85.00
85.00
105.00
110.00
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
236.00
302.00
361.00
437.00
500.00
630.00
984.00
1411.00
70.00
70.00
76.00
76.00
81.00
81.00
99.00
109.00
Providing and laying in trenches ---------dia........... grade Galvanised iron pipes having
embossed I.S.I. mark on it, of jindal/Tata/Zenith
or equivalant make of .......... kg/metre necessary
fitting remaking good the demolished portion with
filling trenches and with primer of anti-corrosive
oil paint , 2 coats complete.
Spec. No.: Bd.V.5 Page No. 596
A
a
b
c
d
e
f
g
h
B
a
b
c
d
e
f
g
h
122
ITEM
NO.
Description
Unit
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
264.00
370.00
417.00
521.00
630.00
829.00
1218.00
1689.00
74.00
85.00
92.00
106.00
135.00
164.00
178.00
205.00
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
244.00
317.00
379.00
471.00
561.00
724.00
1074.00
1520.00
77.00
84.00
92.00
105.00
135.00
164.00
179.00
205.00
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
167.00
196.00
247.00
342.00
392.00
577.00
69.00
69.00
75.00
75.00
79.00
80.00
A
a
b
c
d
e
f
g
h
B
a
b
c
d
e
f
g
h
7
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
Providing and fixing on walls/ ceiling/ floor ------dia. CPVC pipe of Prince / Sudhakar / Kishan /
Supreme or equivalent make with necessary
fittings, remaking good the demolished portion
etc. complete.
Spec. No.: BD.V 5 page 596 and as directed by
Engineer in charge
123
ITEM
NO.
Description
Unit
a
b
c
d
e
f
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
Providing & laying in walls ----- mm dia
heavy/medium having embosed as ISI mark of
jindal/Tata/Zenith or equivalant make galvanise
iron pipe ----- kg/Rmt necessary fitting for
concealed pipe work including cutting chase &
making good the wall etc complete (GI pipe
Heavy) Spec. No.: As directed by Engineer-incharge
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
174.00
212.00
264.00
376.00
453.00
671.00
75.00
83.00
90.00
104.00
133.00
162.00
A
i
ii
iii
iv
v
B
i
ii
iii
iv
v
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
361.00
459.00
497.00
586.00
661.00
143.00
143.00
143.00
143.00
143.00
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
341.00
406.00
459.00
535.00
592.00
143.00
143.00
143.00
143.00
143.00
124
ITEM
NO.
Description
Unit
10
15 mm
20 mm
25 mm
32 mm
40 mm
Providing and fixing ------------ diameter water
meter with non-return valve including strainer,
sockets/ union nut including water meter box
making locking arrangement and lock. [Without
chamber].
Spec.
No.:
Bd.V.7
Page
No.
600
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
283.00
317.00
368.00
478.00
529.00
150.00
146.00
134.00
127.00
105.00
a
b
c
d
e
f
g
15 mm
20 mm
25 mm
40 mm
50 mm
80 mm
100 mm Dia.
Providing and fixing --------- diameter screw down
bib/ stop tap of brass including necessary
socket union nut complete.
Spec.
No.:
Bd.V.8
Page
No.
601
No.
No.
No.
No.
No.
No.
No.
1938.00
2717.00
4302.00
5243.00
10825.00
12855.00
16542.00
165.00
174.00
217.00
345.00
665.00
1005.00
1012.00
No.
No.
248.00
303.00
11
12
a 15 mm
b 20 mm
125
38.00
36.00
ITEM
NO.
Description
Unit
25 mm
Providing and fixing screw down ----------diameter wheeled stop tap of brass including
necessary sockets/union nut complete.
Spec. No.: Bd.V.9 Page No. 601
No.
382.00
39.00
a
b
c
d
e
f
g
h
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
Providing and fixing 100 mm dia. chromium
plated brass showers rose to 15mm dia. supply
pipe including necessary bend and socket
complete.
Spec. No.: Bd.V. 12 Page No. 603
Providing
and
fixing
----------diameter
concussion push button type brass/gun metal
self-closing tap including necessary socket
complete.
Spec. No.: Bd.V.14 Page No. 604
No.
No.
No.
No.
No.
No.
No.
No.
No.
254.00
321.00
398.00
619.00
694.00
749.00
840.00
895.00
305.00
39.00
43.00
43.00
54.00
49.00
50.00
75.00
65.00
36.00
a 15 mm
b 25 mm
Providing and fixing H.D.P container Sintex or
equivalent make conforming to 15 spce. one
piece moulded water tank made out of high
density polythyler and built corrugated inclusive
of delivery up to destination hoisting and fixing of
accessories such as inlet,outlet overflow pipe
inclusive of all tanks capacity between 200 to
1000 liters
Spec. No.: As directed by engineer-in-charge.
No.
No.
Ltr.
230.00
256.00
10.00
6.00
52.00
0.00
13
14
15
16
126
ITEM
NO.
Description
Unit
Ltr.
9.00
R.Mt.
791.00
443.00
No.
2582.00
1261.00
No.
6510.00
848.00
17
18
19
20
127
5
0.00
ITEM
NO.
Description
Unit
21
No.
7874.00
1230.00
22
No.
4996.00
1259.00
No.
7460.00
1253.00
23
128
ITEM
NO.
Description
Unit
No.
No.
4576.00
4768.00
1200.00
1145.00
No.
No.
3853.00
4045.00
1198.00
1182.00
24
25
a
b
a
b
Providing and fixing European type ------earthenware water closet pan of Hindustan /
Perryware / Neycer / Cera or equivalant make
with UPVC seat and lid with chromiumplated
brass hinges and rubber buffers including UPVC
and vent pipe up to the outside face of wall 10
literenameled low level flushing cistern with
fittings pipe stop tap brackets for fixing cistern 32
mm dia. UPVC flush pipe with fittings and clamps
,20 mm dia.UPVC overflow pipe ,mosquito proof
couplings G.I. chain and pulley,with water Jet
and fitting including cutting and making good to
the walls and floors testing etc. complete.( prior
approval of sample and brand by Ex. Engineer is
necessary before use)
Spec. No.: Specfications Bd v 21 page 610
white glazed
coloured glazed
Providing and fixing European type -----earthenware water closet pan of Hindustan /
Perryware / Neycer / Cera or equivalant make
with UPVC seat and lid with chromium plated
brass hinges and rubber buffers including UPVC
and vent pipe up to the outside face of wall
without flushing cistern with flush cock and
with water Jet and necessary fittings including
cutting and making good to the walls and floors
testing etc. complete.( prior approval of sample
and brand by Ex. Engineer is necessary before
use)
Spec. No.: Specfications Bd v 21 page 611
white glazed
coloured glazed
129
ITEM
NO.
Description
Unit
No.
6385.00
1611.00
No.
1306.00
184.00
No.
No.
6211.00
6753.00
848.00
848.00
26
27
28
130
ITEM
NO.
Description
Unit
No.
No.
No.
3087.00
3243.00
4370.00
503.00
503.00
1139.00
No.
8163.00
1813.00
29
30
31
131
ITEM
NO.
Description
Unit
32
R.Mt.
1303.00
168.00
33
No.
No.
No.
2686.00
2326.00
2729.00
479.00
522.00
658.00
No.
No.
No.
3000.00
2871.00
3628.00
571.00
623.00
813.00
34
a
b
c
a
b
c
132
ITEM
NO.
Description
Unit
a White glazed
b Coloured glazed
a Providing and fixing white glazed earthenware
sink 600mm x 200mm x 450mm including all
connection of the G.I. supply and P.V.C. waste
pipes up to the outside face of the wall, cold
water chromium plated screw down bib tap, rolled
steel or C.I. brackets, rubber plug with chain and
stop tap complete.
Spec. No.: Bd.V.31 Page No.615
No.
No.
No.
1200.00
1350.00
2979.00
65.00
73.00
614.00
No.
2672.00
685.00
37
No.
7312.00
1609.00
38
572.00
770.00
149.00
166.00
35
36
a 8 cm
b 10 cm
133
ITEM
NO.
Description
Unit
No.
No.
No.
No.
299.00
316.00
355.00
511.00
39
40
134
146.00
185.00
112.00
116.00
ITEM
NO.
Description
Unit
a 75 mm
b 110 mm
c 160 mm
Providing , laying & fixing ,jointing Supreme Ecodrain -------- SN 8 Nu- Drain Upvc pipes or of
equivalent make, manufacture as per EN 13476
or equivalent as per I.S.15328 with fittings such a
bends, tees, coupler, etc, jointing with rubber
lubricant including necessary excavation, trench
refilling with selective excavated material etc.
complete.
Spec. No.: As Directected By Engineer Incharge
R.Mt.
R.Mt.
R.Mt.
371.00
555.00
1204.00
101.00
101.00
101.00
a 110 mm
b 160 mm
c 200 mm
Providing and fixing 15cm x 10cm salt glazed
stoneware gully trap in cement concrete 1:4:8
outside the building including cast iron grating in
the sink, connecting glazed stoneware pipe, brick
masonry chamber with cast iron lid and cast iron
grating for the gully trap.
Spec. No.: Bd.V.38, Page No. 623
R.Mt.
R.Mt.
R.Mt.
No.
309.00
505.00
519.00
1121.00
24.00
24.00
14.00
153.00
R.Mt.
192.00
37.00
41
42
43
44
135
ITEM
NO.
Description
Unit
R.Mt.
243.00
7.00
R.Mt.
R.Mt.
R.Mt.
190.00
280.00
352.00
47.00
58.00
62.00
a
b
c
c
R.Mt.
R.Mt.
R.Mt.
R.Mt.
472.00
482.00
531.00
760.00
147.00
138.00
140.00
148.00
No.
No.
6003.00
4505.00
935.00
707.00
46
47
100 mm
150 mm
225 mm
300 mm
Providing & constructing Brick Masonry
Inspection Chamber .......................
size
including 1:4:8 cement concrete foundation 1:2:4
cement concrete channels half round G.S.W.
pipes, Brick Masonry, plastering from inside and
airtight .............. cover with frame fixed in cement
concrete etc. complete.
Spec. No.: Bd.V.43, Page No. 626
A 60cm x 45cm x 90cm
i) C. I. lid
ii) with R.C.C. Cover.
B 90cm x 45cm x 90cm
136
ITEM
NO.
Description
Unit
No.
No.
6821.00
5162.00
1067.00
816.00
No.
No.
No.
7422.00
6203.00
2992.00
1067.00
900.00
372.00
48
49
137
ITEM
NO.
Description
Unit
50
No.
8254.00
413.00
51
No.
19646.00
455.00
138
ITEM
NO.
Description
Unit
No.
895.00
288.00
No.
No.
2513.00
1722.00
194.00
309.00
No.
No.
No.
2318.00
1332.00
11205.00
299.00
286.00
1194.00
55
Ltr.
2.00
2.00
56
No.
352.00
46.00
57
No.
879.00
124.00
52
53
A 90 cm x 45 cm
i) Heavy duty (225 kg)
b Medium duty (140 kg)
B 60 cm x 45 cm
54
139
ITEM
NO.
Description
Unit
58
No.
1070.00
113.00
59
No.
3696.00
257.00
60
No.
1122.00
95.00
61
No.
866.00
133.00
62
No.
1598.00
129.00
63
No.
111.00
6.00
140
ITEM
NO.
Description
Unit
64
No.
2590.00
1477.00
65
No.
No.
No.
201.00
587.00
637.00
32.00
13.00
59.00
66
67
No.
158.00
16.00
68
No.
551.00
64.00
141
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
Sq.Mt.
49.00
48.00
Sq.Mt.
22.00
21.00
No.
731.00
717.00
No.
496.00
486.00
No.
361.00
354.00
Sq.Mt.
24.00
24.00
Sq.Mt.
10.00
10.00
Cu.Mt.
111.00
109.00
Cu.Mt.
140.00
137.00
Unit
142
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
Cu.Mt.
114.00
112.00
Cu.Mt.
162.00
159.00
Cu.Mt.
237.00
232.00
Cu.Mt.
399.00
389.00
Cu.Mt.
259.00
254.00
No.
70.00
68.00
No.
66.00
65.00
Sq.Mt.
36.00
35.00
Sq.Mt.
19.00
19.00
10
11
12
13
14
15
16
17
18
Unit
143
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
19
Sq.Mt.
10.00
10.00
20
No.
27.00
26.00
No.
72.00
70.00
Sq.Mt.
42.00
41.00
Sq.Mt.
20.00
20.00
Sq.Mt.
19.00
19.00
Sq.Mt.
15.00
15.00
Sq.Mt.
14.00
14.00
R.Mt.
22.00
22.00
21
22
23
24
25
26
27
Unit
144
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
R.Mt.
28.00
28.00
R.Mt.
29.00
29.00
No.
10.00
10.00
R.Mt.
10.00
10.00
Cu.Mt.
614.00
602.00
R.Mt.
R.Mt.
Sq.Mt.
130.00
152.00
30.00
63.00
86.00
30.00
R.Mt.
4.00
4.00
Sq.Mt.
9.00
9.00
28
29
30
31
32
33
34
35
36
a
b
Unit
145
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
R.Mt.
9.00
9.00
R.Mt.
9.00
9.00
39
Sq.Mt.
8.00
8.00
40
Sq.Mt.
42.00
10.00
No.
53.00
51.00
No.
88.00
85.00
No.
895.00
877.00
37
38
41
42
43
Unit
146
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
Sq.Mt.
35.00
34.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
124.00
66.00
8.00
29.00
64.00
8.00
4.00
44
45
a
b
46
Unit
Labour
5
47
Sq.Mt.
4.00
48
No.
289.00
283.00
49
Sq.Mt.
112.00
18.00
147
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
50
Sq.Mt.
125.00
18.00
51
Labour
5
12.50 mm
Sq.Mt.
265.00
20.00
b
c
d
25 mm
50 mm
75 mm
Sq.Mt.
Sq.Mt.
Sq.Mt.
480.00
800.00
1108.00
25.00
33.00
141.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
Sq.Mt.
365.00
389.00
477.00
588.00
112.00
110.00
111.00
112.00
Sq.Mt.
Sq.Mt.
377.00
422.00
133.00
133.00
52
53
Unit
a
b
20 mm.
25 mm.
40 mm.
50 mm.
Guniting by dry mix process as per IS 9012 (1978)
to beams in C.M. 1:3, ----------- thick under pressure
of 2.1 kg to 2.8 kg sq.cm. including forms,
scaffolding, floating the surface, curing for 14 days
etc. complete. (Excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 710
20 mm
25 mm
148
Bd - W : Miscellaneous
ITEM
NO.
Description
Unit
Completed
4
20 mm
25 mm
Providing preconstructional antitermite treatment
as per I.S. 6313 (Part-II) by treating the bottom
surface
and
sides
of
excavation
clorophyriphoas/lendene at the rate of 5 litres of
emulsion concentrates of 0.5 percent of Aldrin per
square meter of surface area covering 10 years
guarantee.
Spec. No.: As directed by Engineer in charge.
Sq.Mt.
Sq.Mt.
Sq.Mt.
350.00
370.00
50.00
113.00
111.00
3.00
56
Sq.Mt.
75.00
7.00
57
Sq.Mt.
50.00
4.00
54
55
Labour
5
149
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
58
Sq.Mt.
98.00
14.00
59
No.
37.00
5.00
60
No.
20.00
5.00
61
No.
12.00
3.00
Unit
150
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
62
R.Mt.
30.00
16.00
63
Sq.Mt.
16.00
2.00
64
No.
83.00
25.00
65
Sq.Mt.
1824.00
57.00
Unit
151
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
66
R.Mt.
537.00
113.00
67
R.Mt.
1629.00
0.00
R.Mt.
437.00
98.00
68
Unit
152
Labour
5
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
R.Mt.
745.00
83.00
Sq.Mt.
56.00
11.00
69
70
Unit
Labour
5
71
Sq.Mt.
74.00
12.00
72
Sq.Mt.
66.00
9.00
73
Sq.Mt.
112.00
71.00
153
Bd - W : Miscellaneous
ITEM
NO.
Description
74
Unit
Completed
4
Labour
5
No.
15141.00
2335.00
75
R.Mt.
112.00
41.00
76
R.Mt.
568.00
124.00
Sq.Mt.
680.00
312.00
77
154
Bd - W : Miscellaneous
ITEM
NO.
Description
Unit
Completed
4
Labour
5
No.
7302.00
6293.00
No.
8095.00
6468.00
80
Cu.Mt.
148.00
143.00
81
Sq.Mt.
1393.00
427.00
82
R.Mt.
650.00
320.00
78
79
155
Bd - W : Miscellaneous
Final Rate (2015-16)
ITEM
NO.
Description
Completed
4
Sq.Mt.
4473.00
Sq.Mt.
42.00
83
Unit
Labour
5
756.00
156
0.00
ROAD WORKS
ITEM
NO.
Description
Completed
4
a on W.B.M. surface
b on B.T.surface
Sq.Mt.
Sq.Mt.
10.00
13.00
9.00
11.00
c on murum surface
Sq.Mt.
5.00
4.00
No.
No.
No.
No.
No.
No.
423.00
559.00
716.00
781.00
857.00
939.00
307.00
405.00
577.00
573.00
638.00
695.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
113.00
122.00
136.00
282.00
100.00
108.00
120.00
249.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
60.00
66.00
72.00
140.00
26.00
28.00
34.00
110.00
Labour
5
A
i)
ii)
iii)
iv)
B
i)
ii)
iii)
iv)
30 to 60 cm.
60 to 90 cm
90 to 180 cm.
180 to 270 cm.
270 to 450 cm
above 450 cm.
Excavation for roadways by...... such as ...... including
dressing section to the required camber and side slopes
and conveying the excavated materials with all lifts upto
a lead of 50 m and spreading for embankment,
disposing as directed etc. complete.
Spec. No.: Rd. 2 Page No. 351/2012
By manual means
earth soil of all sorts sand, gravel or soft murum
hard murum
hard murum and boulders
soft rock
By Mechanical means
earth soil of all sorts sand, gravel or soft murum
hard murum
hard murum and boulders
soft rock
157
ITEM
NO.
Description
Completed
4
Labour
5
a by blasting
No.
b by weding chislling or line drilling
No.
Preparing embankment with approved materials
Cu.Mt.
obtained from the cutting within a lead of 50m including
all lifts,laying layer of 20 to 30 cm. thickness, breaking
clods, dressing to the required lines, curves, grade &
section with normal watering and compaction
etc.complete.
Spec. No.: Rd.14 Page No. 367
492.00
800.00
40.00
337.00
578.00
26.00
90.00
72.00
89.00
110.00
a By static roller
b By Vibratory roller
Cu.Mt.
Cu.Mt.
158
ITEM
NO.
Description
Completed
4
Labour
5
113.00
140.00
85.00
86.00
110.00
80.00
10
Cu.Mt.
Providing earthwork in embankment with fly ash
available at factory site upto lead of 50m including all
lifts, laying in layers of 20cm. to 30cm. thick breaking
clods, dressing to the required lines, curves, grade &
section, watering & compacting with power rollor to
achieve dry density 1.43 gm /cc with OMC of 18.50 % as
per direction of Engg. in charge.
Spec. No.: As directed by Engineer-in-charge
40.00
3.00
11
a static roller.
No.
45.00
20.00
No.
58.00
33.00
159
ITEM
NO.
Description
Completed
4
Cu.Mt.
70.00
30.00
Cu.Mt.
73.00
37.00
13
412.00
36.00
14
12
a 80mm
Cu.Mt.
469.00
18.00
b 60mm
Cu.Mt.
502.00
19.00
c 50mm
Cu.Mt.
519.00
19.00
d 40mm
Cu.Mt.
592.00
19.00
a 40 mm.
b 25 mm.
Cu.Mt.
Cu.Mt.
686.00
720.00
22.00
19.00
c
d
e
f
20 mm.
12 mm.
10 mm.
6 mm.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
740.00
750.00
760.00
770.00
19.00
20.00
20.00
20.00
Cu.Mt.
78.00
3.00
15
16
Labour
5
160
ITEM
NO.
Description
Completed
4
Cu.Mt.
190.00
4.00
18
Cu.Mt.
91.00
2.00
19
Cu.Mt.
160.00
7.00
20
Cu.Mt.
125.00
111.00
21
Cu.Mt.
48.00
42.00
22
29.00
26.00
17
23
24
25
Labour
5
Cu.Mt.
27.00
24.00
Sq.Mt.
Sq.Mt.
Sq.Mt.
14.00
20.00
4.00
5.00
a static roller,
b Vibratory roller,
Sq.Mt.
Sq.Mt.
16.00
18.00
3.00
5.00
161
ITEM
NO.
Description
26
27
Completed
4
Labour
5
a static roller
Sq.Mt.
6.00
1.00
b Vibratory roller
Compacting the hard murum side width, layer wise on
each side with Vibratory Roller. roller including artificial
watering etc. complete.
As directed by Engineer-in-charge.
Sq.Mt.
Sq.Mt.
8.00
8.00
2.00
3.00
a Grading - I Material
Cu.Mt.
1117.00
17.00
b Grading - II Material
Cu.Mt.
1180.00
17.00
Cu.Mt.
Providing and laying in situ Dry lean cement concrete
sub-base of trap metal of specified gradation using
,mixing as per approved design mix, compacting with
vibratory roller of minimum 80-100KN static weight to
give desired compacted density,providing construction
joints,and curing with liquid curing compound and
sprinkling water, and covering with moist hessain or
ponding of water for 7days including all
materials,labour,machinery with all leads and lifts,bailing
out water manually,and formwork etc complete.
Spec. No.: MORT&H-601
4506.00
754.00
28
162
ITEM
NO.
Completed
4
Cu.Mt.
Cu.Mt.
1338.00
1204.00
286.00
257.00
i By Manual means.
Cu.Mt.
1405.00
299.00
ii By Mechanical means.
Cu.Mt.
1265.00
269.00
Sq.Mt.
Sq.Mt.
152.00
175.00
21.00
24.00
Sq.Mt.
Sq.Mt.
185.00
196.00
25.00
27.00
1
29
Unit
Description
2
Labour
5
30
163
ITEM
NO.
Completed
4
Sq.Mt.
Sq.Mt.
149.00
173.00
21.00
24.00
Sq.Mt.
Sq.Mt.
183.00
193.00
25.00
27.00
a With sealcoat
Sq.Mt.
385.00
72.00
b Without sealcoat
Providing single coat surface dressing including
supplying all materials, cleaning the road surface,
heating and applying bitumen to the ......... road surface,
spreading chips, use of tools, plant and equipments and
rolling complete. 1) Using Bulk Bitumen grade (60/70)
VG-30
Spec. No.: Rd.51 Page No. 398
Sq.Mt.
295.00
72.00
163.00
122.00
224.00
36.00
36.00
50.00
1
i)
ii)
b
i)
ii)
31
32
33
34
Unit
Description
164
Labour
5
ITEM
NO.
Description
Completed
4
Sq.Mt.
37.00
11.00
Sq.Mt.
52.00
13.00
Sq.Mt.
Sq.Mt.
37.00
52.00
11.00
13.00
36
Sq.Mt.
Providing and applying liquid seal coat type "A"
comprising of a layer of bituminous binder @ 9.8 kg/ 10
Sqm (including cost of antistripping compound wherever
required) followed by a cover of stone chipping @ 0.09
cum/10 sqm of specified grading and rolling with power
roller 8-10 tonne complete as per clause 513 of
MoRT&H specification including all material, labour,
machinery, lighting, guarding and maintenance of
diversion, With Bitumen VG-grade 30(Grade 60/70)
79.00
14.00
37
Cu.Mt.
Providing and laying bituminous macadam in 50/75
mm compacted thickness on prepared surface with
specified graded crushed stone aggregates as per Table
500-4, Grading-II for base/ binding course, loading of
aggregate with F.E. loader, heating and mixing of stone
aggregate and bitumen in computerised hot mix plant,
transported to site by tippers to paver, laid over a
previously repaired surface with paver finisherto the
required grade, level and alignment and rolling with
power roller and vibratory compactor as per clauses
501.6 and 501.7 to achieve the desiredcompaction
complete as per clause 504 of MoRT&H specification
and including all material, labour, machinery, lighting,
guarding and maintenance of diversion but excluding
cost of primer/ tack coat. With Bitumen VG-grade 30 @
3.4% (percentage by weight of total mix).
5442.00
47.00
35
Labour
5
165
ITEM
NO.
1
38
39
Unit
Description
Completed
4
Labour
5
7298.00
49.00
Sq.Mt.
132.00
19.00
Sq.Mt.
128.00
19.00
Sq.Mt.
129.00
19.00
166
ITEM
NO.
1
40
Description
41
167
Completed
4
8473.00
Labour
5
50.00
ITEM
NO.
Description
Completed
4
a Without flyash
Cu.Mt.
6408.00
1130.00
b With flyash
Cu.Mt.
6034.00
1130.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5366.00
5565.00
5737.00
5830.00
1080.00
1007.00
1021.00
1046.00
Cu.Mt.
Cu.Mt.
4941.00
5109.00
984.00
812.00
Labour
5
of 14 days,fixing dowels,tie-bars,cutting joints,jointfillers,sealants and all types of joints and finishing to the
desired surface texture including all
material,labour,machinery with all leads and lifts etc
complete.With Scada (Prior permission of S.E. is
essential )
Spec. No.: MORT&H Clause 602
42
43
PCC M20
PCC M25
PCC M30
PCC M35
Providing and laying in situ cement concrete road
pavement of Using Batching plant,transit mixer and
concrete pump.(RMC) .......... grade,including supplying
all materials, providing steel form work, compaction by
plate vibrator, providing joints at every thirty meters
internal and filling the joints with bitumen,curing
etc.complete. With SCADA with fully automatic micro
processor based PLC attachment (Excluding cost of
reinforcement) (Newly laid concrete shall be covered by
gunny bag/plastic sheet/tarpaulin etc. for curing period
complete.) Prior Approval of S.E.'s essential
Spec. No.: As directed by Engineer-in-charge
a PCC M20
b PCC M25
168
ITEM
NO.
Description
Completed
4
c PCC M30
d PCC M35
Providing R.C.C.(M-15) 5th kilometer stone of standerd
design as per IRC:8-1980,fixing in c.c.M15,including
painting and printing etc.complete. Spec. No.: IRC:81980
Cu.Mt.
Cu.Mt.
No.
5276.00
5363.00
3890.00
831.00
823.00
743.00
45
No.
2459.00
455.00
46
No.
641.00
160.00
47
No.
400.00
131.00
48
No.
425.00
98.00
49
No.
6420.00
110.00
44
169
Labour
5
ITEM
NO.
1
Description
2
Completed
4
Labour
5
No.
3512.00
110.00
51
No.
5114.00
110.00
170
ITEM
NO.
1
Description
2
Completed
4
Labour
5
No.
3931.00
110.00
53
No.
4460.00
110.00
171
ITEM
NO.
1
Description
2
Completed
4
Labour
5
Sq.Mt.
9139.00
110.00
55
Sq.Mt.
10980.00
145.00
172
ITEM
NO.
1
Description
Completed
4
Labour
5
56
57
173
No.
4356.00
556.00
1350.00
0.00
ITEM
NO.
1
Description
2
Completed
4
No.
635.00
Labour
5
174
11.00
ITEM
NO.
1
59
Description
2
The Median Marker shall have rectangular-shaped,
fluorescent yellow color retro-reflective sheeting of size
not less than 8.5cm*8.5cm and with fully reflective micro
prismatic cube corners as its retro-reflective elements as
per IRC 67 2010 and ASTM D4956 type XI
specifications reflectivity values. The retro-reflective
sheeting shall be one or both sides of the Median Marker
and shall be edge protected with no exposed edges
which will prevent edge lifting, vandalism, sheeting
damage, etc. The Median Marker shall be fixed by a
combination of epoxy adhesive and grouting. Median
Marker
Spec. No.: As directed by Engineer-in-charge
Supplying & Fixing of Molded Shank Raised Pavement
Markers made of polycarbonate and ABS moulded body
and reflective panels with micro prismatic lens capable
of providing total internal reflection of the light entering
the lens face and shall support a load of 16000 kg tested
in accordance to ASTM D 4280 Type H and complying
to Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. The
height, width and length shall not exceed 50 mm, 100
mm and 102 +/- 2 mm and with minimum reflective area
of 13 Sqcm on each side and the slope to the base shall
be 35 +/- 5 degree. The strength of detachment of the
integrated cylindrical shanks, (of diameter not less than
19 +/- 2 mm and height not less than 30+/- 2 mm) from
the body is to be a minimum value of 500 Kgf. Fixing will
be by drilling holes on the road for the shanks to go
inside, without nails and using epoxy resin based
adhesive as per manufacturers recommendation and
complete as directed by the engineer. Twin Shank RPM
(Cat Eye)
Spec. No.: As directed by Engineer-in-charge
175
Completed
4
No.
638.00
Labour
5
13.00
ITEM
NO.
Description
60
61
62
Completed
4
Labour
5
a White
Sq.Mt.
1100.00
0.00
b Yellow
Sq.Mt.
1155.00
0.00
a New
R.Mt.
8.40
3.00
b Old
Providing and painting zebra painting of pedestraiin
crossing on the carrigeway with approved road making
paint in two coats etc. complete.(over 10cm.wide patta)
Spec. No.: MORTH 803
R.Mt.
7.50
6.00
a New
Sq.Mt.
66.00
44.00
b Old
Sq.Mt.
132.00
85.00
63
No.
233.00
128.00
64
No.
228.00
128.00
176
ITEM
NO.
Description
Completed
4
65
No.
88.00
53.00
66
No.
44.00
25.00
67
No.
7.00
3.00
No.
No.
No.
9.00
12.00
13.00
3.00
3.00
3.00
i
ii
iii
iv
Labour
5
68
18.00
10.00
69
Sq.Mt.
17.00
4.00
70
Sq.Mt.
142.00
41.00
71
560.00
86.00
5.00
5.00
72
177
ITEM
NO.
Description
Completed
4
R.Mt.
12.00
11.00
74
R.Mt.
110.00
43.00
75
Cu.Mt.
480.00
312.00
76
77
73
5.00
Km.
600.00
Km.
Km.
1200.00
600.00
Km.
15.00
178
Labour
5
4.00
ITEM
NO.
Description
78
79
80
Completed
4
Labour
5
Sqmt
138.00
33.75
b) TFI-5200 Type-II
Sqmt
128.00
33.75
c) TFI-5100 Type-III
Sqmt
116.00
33.75
Sqmt
100.00
33.75
Sqmt
128.00
33.75
Sqmt
126.00
33.75
179
ITEM
NO.
1
Description
Completed
4
Labour
5
82
Sqmt
177.00
33.75
Sqmt
219.00
33.75
Sqmt
122.00
33.75
Sqmt
138.00
33.75
Providing and laying CE Marked Reinforced NonWoven Composite of Techfab India indigenously
manufactured
needle
punched
polypropylene
(continuous filament will not be accepted), Reinforced
with high tenacity Polyester Yarn on the prepared sub
grade for Reinforcement cum separation cum drainage
& filtration application with necessary overlaps as per
drawing etc. complete. (Specification: IRC:SP:59-2002 &
MORTH Section-700)
180
ITEM
NO.
Description
83
84
Completed
4
Labour
5
a) a) TFI TGC-60
Sqmt
185.00
33.75
b) b) TFI TGC-90
Sqmt
230.00
33.75
Rmt
61.00
3.38
Rmt
77.00
3.38
a) Size 1M x 1M x 1M
No.
1610.00
67.50
b) Size 1M x 1M x 2M
No.
2871.00
135.00
c) Size 1M x 1M x 3M
No.
4166.00
202.50
181
BRIDGE WORK
BR
ITEM
NO.
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
438.00
371.00
352.00
144.00
347.00
312.00
368.00
171.00
Cu.Mt.
288.00
340.00
A By Manual Means.
i earth, soils of all types, sand, gravel, soft murum
138.00
135.00
ii
iii
iv
v
vi
vii
148.00
177.00
362.00
586.00
673.00
856.00
146.00
173.00
358.00
324.00
396.00
809.00
510.00
506.00
103.00
46.00
Dismentling carefully the old structure ------------- ------ including cutting reinforcement steel bars,
sorting out serviceable materials and stacking,
disposing off unserviceable material, upto lead of
50m etc. Complete.
a)
b)
c)
d)
Hard murum
hard murum and boulders
Soft rock
in hard rock (blasted).
in hard rock (by controlled blasting).
hard rock chiselled and wedged or line drilled
182
ITEM
NO.
Unit
1
ii
iii
iv
v
3
Hard murum
hard murum and boulders
Soft rock
Marshy soil, depth upto 3.00m
Completed
Labour
118.00
132.00
274.00
149.00
51.00
66.00
80.00
32.00
A
i
ii
iii
iv
cum
cum
cum
cum
146.00
218.00
59.00
180.00
57.00
57.00
57.00
57.00
B
i
ii
iii
iv
cum
cum
cum
cum
416.00
697.00
190.00
557.00
124.00
124.00
124.00
124.00
183
ITEM
NO.
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
4273.00
4515.00
4640.00
4765.00
1
A
i
ii
iii
iv
Cu.Mt.
Cu.Mt.
5100.00
5225.00
693.00
693.00
693.00
693.00
901.00
901.00
184
Cu.Mt.
Cu.Mt.
4760.00
4885.00
624.00
624.00
Cu.Mt.
3997.00
477.00
Cu.Mt.
Cu.Mt.
4783.00
4917.00
744.00
744.00
ITEM
NO.
Unit
Completed
Labour
5
Cu.Mt.
Cu.Mt.
4942.00
5009.00
744.00
744.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5345.00
5477.00
5609.00
5972.00
967.00
967.00
967.00
967.00
M-20
M-25
M-30
M-35
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5005.00
5137.00
5269.00
5632.00
670.00
670.00
670.00
670.00
R.Mt.
118.00
51.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
3892.00
4403.00
4568.00
830.00
830.00
830.00
2
iii M-30
iv M-35
B with fully automatic micro processor based PLC
with SCADA enabled with reversible Drum Type
mixer.With natural sand .
i M-20
ii M-25
iii M-30
iv M-35
C With Fully Automatic Micro Processor based
PLC with SCADA enabled concrete Batch Mix
Plant (PAN Mixer).With crushed sand. (RMC)
i
ii
iii
iv
A
i
ii
iii
185
ITEM
NO.
Unit
2
iv M-25
v M-30
B with fully automatic micro processor based PLC
with SCADA enabled with reversible Drum Type
mixer.With natural sand .
i M-10
ii M-15
iii M-20
iv M-25
v M-30
Completed
Labour
5
Cu.Mt.
Cu.Mt.
4733.00
4898.00
830.00
830.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
4454.00
5180.00
5510.00
5642.00
5774.00
1079.00
1079.00
1079.00
1079.00
1079.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
4114.00
4840.00
5170.00
5302.00
5434.00
747.00
747.00
747.00
747.00
747.00
No.
No.
157189.00
124376.00
26582.00
20995.00
M-10
M-15
M-20
M-25
M-30
Providing islands for laying steel curb or cutting
edge of wells upto 3mtr. depth of standing water
with earth.
Spec. No.: BR.7. P.No. 118 MoRT&H,cl.1200
M.T.
71761.00
13343.00
11
M.T.
65424.00
6883.00
186
ITEM
NO.
Unit
Completed
Labour
5
12
No.
6043.00
854.00
13
No.
1303.00
597.00
14
No.
6104.00
1038.00
15
Cu.Mt.
Cu.Mt.
3943.00
4423.00
812.00
812.00
187
ITEM
NO.
Description
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
3603.00
4083.00
568.00
568.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5655.00
5721.00
5787.00
6084.00
6249.00
900.00
900.00
900.00
900.00
900.00
Cu.Mt.
Cu.Mt.
5315.00
5381.00
5447.00
5744.00
5909.00
630.00
630.00
630.00
630.00
630.00
M-20
M-25
M-30
M-35
M-40
Cu.Mt.
Cu.Mt.
188
ITEM
NO.
1
17
Description
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5515.00
5790.00
5922.00
6285.00
6450.00
575.00
575.00
575.00
575.00
575.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5175.00
5450.00
5582.00
5945.00
6110.00
575.00
575.00
575.00
575.00
575.00
M-20
M-25
M-30
M-35
M-40
M-20
M-25
M-30
M-35
M-40
Providing & laying in situ RCC including form
work Using ............ Mixer of ........Grade, trap
/granite /quartzite /gneiss metal for the bottom
plugs of wells in the ......... condition including
compaction and curing wherever necessary.
Spec. No.: BR.16 Page No. 129 MoRT&H 1200,
1500& 1700
189
ITEM
NO.
Unit
Completed
Labour
a M-15
b M-20
c M-25
Cu.Mt.
Cu.Mt.
Cu.Mt.
4743.00
5073.00
5271.00
893.00
893.00
893.00
II
a
b
c
Cu.Mt.
Cu.Mt.
Cu.Mt.
5009.00
5372.00
5590.00
1139.00
1139.00
1139.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
4403.00
4733.00
4931.00
625.00
625.00
625.00
II
a
b
c
Cu.Mt.
Cu.Mt.
Cu.Mt.
4669.00
5032.00
5250.00
797.00
797.00
797.00
Cu.Mt.
690.00
268.00
19
190
ITEM
NO.
Unit
Completed
Labour
a M-15
b M-20
c M-25
Cu.Mt.
Cu.Mt.
Cu.Mt.
4506.00
4836.00
5034.00
984.00
984.00
984.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
4166.00
4496.00
4694.00
689.00
689.00
689.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5714.00
5846.00
5978.00
6242.00
836.00
836.00
836.00
836.00
1
20
21
M-20
M-25
M-30
M-35
191
ITEM
NO.
Description
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5373.00
5506.00
5638.00
5902.00
M-20
M-25
M-30
M-35
Sinking of wells for foundation through all
strata, except rock which can be removed by
grabbing and chiseling soft disintegrated rock
which required special efforts, including blasting,
large scale dewatering heavy chiseling, cutting
by pneumatic tools and all materials available to
sink through such strata including removal of
obstacle and use of necessary plant and
machinery, divers etc. and proper seating of the
wells. Depth up to 5 m. i) Well Dia. up to 5
metres
Spec. No.: BR.14 Page No. 124 MoRT&H 1200
192
Basic
Basic
Basic
Basic
Basic
Basic
Basic
585.00
585.00
585.00
585.00
ITEM
NO.
Unit
Completed
Labour
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
49665.00
71228.00
97077.00
126472.00
133316.00
140160.00
Cu.Mt.
1185.00
784.00
Cu.Mt.
Cu.Mt.
4293.00
4458.00
580.00
580.00
Cu.Mt.
Cu.Mt.
5158.00
5744.00
755.00
755.00
Cu.Mt.
Cu.Mt.
4818.00
5404.00
522.00
522.00
i
ii
iii
iv
v
23
24424.00
47175.00
47366.00
61709.00
76052.00
110395.00
193
ITEM
NO.
Unit
Completed
Labour
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
3116.00
4490.00
6020.00
7389.00
7998.00
10099.00
15250.00
903.00
1256.00
1574.00
2228.00
2340.00
2790.00
4539.00
R.Mt.
R.Mt.
R.Mt.
3020.00
4340.00
5806.00
513.00
798.00
1119.00
25
600 mm dia.
750mm dia.
900mmdia.
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
194
ITEM
NO.
Unit
2
iv
v
vi
vii
26
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
Completed
Labour
R.Mt.
R.Mt.
R.Mt.
R.Mt.
7122.00
7704.00
9714.00
14650.00
1419.00
1549.00
2616.00
3151.00
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
3154.00
4534.00
6077.00
7452.00
8064.00
10175.00
15345.00
912.00
1311.00
1742.00
2169.00
2290.00
3157.00
4669.00
600 mm dia.
750mm dia.
900mmdia.
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
195
ITEM
NO.
Description
Unit
Completed
Labour
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
R.Mt.
3058.00
4387.00
5863.00
7185.00
7700.00
9790.00
14745.00
513.00
798.00
1119.00
1419.00
1549.00
2016.00
3151.00
3583.00
5163.00
6923.00
754.00
1173.00
1645.00
600 mm dia.
750mm dia.
900mmdia.
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
Providing & laying in situ RCC M30 including
form work Using ............ Mixer of ........mm dia,
bored piles by conventional winch / tripod rig
each of load capacity as per design and of
specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by
tremie arrangement companction of concrete
and withdrawal of steel shell etc. compele.
(depth
upto
15
m)
Spec. No.: BR-19 Page 132, MORTH - 1100 and
1700
196
ITEM
NO.
1
iv
v
vi
vii
Description
Unit
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
Completed
4
Labour
5
Rmt
Rmt
Rmt
Rmt
8497.00
9197.00
11613.00
17537.00
2085.00
2278.00
2962.00
4633.00
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
3473.00
4991.00
6677.00
8190.00
8859.00
11171.00
16847.00
754.00
1173.00
1645.00
2085.00
2278.00
2962.00
4633.00
600 mm dia.
750mm dia.
900mmdia.
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
Providing & laying in situ RCC M35 including
form work Using ............ Mixer of ........mm dia,
bored piles by conventional winch / tripod rig
each of load capacity as per design and of
specified diameter of as directed, placed through
steel shell sunk to the required depth through all
strata except rock, excluding provision of
reinforcement including placing concrete by
tremie arrangement companction of concrete
and withdrawal of steel shell etc. compele .(
depth upto 15 m ) Spec. No.: BR-19 Page 132,
MORTH - 1100 and 1700
197
ITEM
NO.
Description
Unit
Completed
Labour
600 mm dia.
750mm dia.
900mmdia.
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
3469.00
4987.00
6684.00
8197.00
8870.00
11192.00
16879.00
754.70
1173.10
1645.30
2085.70
2278.40
2962.90
4633.10
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
3516.00
5045.00
6742.00
8262.00
8924.00
11258.00
16956.00
754.70
1173.00
1645.30
2085.70
2278.40
2962.90
4633.10
72255.00
12366.00
600 mm dia.
750mm dia.
900mmdia.
1000mm dia.
1050mm dia.
1200mm dia.
1500mm dia.
Providing, placing and driving in position 6mm
thick permanent M.S. liner up to required depth
with 12 mm thick M.S. cutting edge of 0.5 meter
length of bottom including fabricating, cutting the
M.S. sheet to required diameter and shape,
welding the joints and driving with the help of
required machineries including all materials,
labour and lift etc. complete.
Spec. No.: MORTH 5th Revision No.1100 and
1904
198
M.T.
ITEM
NO.
Unit
Completed
Labour
30
M.T.
69451.00
6802.00
31
Cu.mt.
Cu.mt.
Cu.mt.
4699.00
4861.00
5026.00
802.00
802.00
802.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
5475.00
5607.00
5739.00
1056.00
1056.00
1056.00
A
i
ii
iii
199
ITEM
NO.
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
5135.00
5267.00
5399.00
740.00
740.00
740.00
Cu.Mt.
Cu.Mt.
4147.00
4322.00
982.00
1020.00
33
200
ITEM
NO.
Unit
Completed
Labour
1
A
i
ii
iii
iv
Cu.Mt
Cu.Mt
Cu.Mt
Cu.Mt
5060.00
5225.00
5390.00
5555.00
861.00
861.00
861.00
861.00
Cu.Mt
Cu.Mt
Cu.Mt
Cu.Mt
5776.00
5941.00
6106.00
6271.00
1119.00
1119.00
1119.00
1119.00
Cu.Mt
Cu.Mt
Cu.Mt
Cu.Mt
5436.00
5601.00
5766.00
5931.00
775.00
775.00
775.00
775.00
5445.00
5610.00
5775.00
5940.00
949.00
949.00
949.00
949.00
M-20
M-25
M-30
M-35
A
i
ii
iii
iv
34
201
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
ITEM
NO.
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5792.00
5924.00
6056.00
6254.00
1161.00
1161.00
1161.00
1161.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5452.00
5584.00
5716.00
5914.00
812.00
812.00
812.00
812.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5414.00
5579.00
5744.00
5909.00
1083.00
1083.00
1083.00
1083.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5924.00
6056.00
6188.00
6386.00
1408.00
1408.00
1408.00
1408.00
35
202
ITEM
NO.
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5584.00
5716.00
5848.00
6046.00
975.00
975.00
975.00
975.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5206.00
5371.00
5536.00
5701.00
1046.00
1046.00
1046.00
1046.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5584.00
5716.00
5848.00
6046.00
1105.00
1105.00
1105.00
1105.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5244.00
5376.00
5508.00
5706.00
773.00
773.00
773.00
773.00
203
ITEM
NO.
Unit
Completed
Labour
5
37
Sq.Mt.
131.00
63.00
38
Cu.Cm.
1.85
0.35
39
M.T.
291.00
54.00
M.T.
583.00
54.00
M.T.
234.00
27.00
40
41
204
ITEM
NO.
1
Unit
Completed
Labour
5
42
M.T.
232.00
11.00
43
M.T.
218.00
11.00
44
Cu.Mt.
1274.00
109.00
R.Mt.
129.00
10.00
45
205
ITEM
NO.
Description
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
502.00
857.00
248.00
248.00
Cu.Mt.
778.00
215.00
46
47
48
206
ITEM
NO.
Unit
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5606.00
6471.00
6781.00
6886.00
8207.00
904.00
904.00
904.00
904.00
904.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5904.00
6712.00
6968.00
7224.00
8540.00
9045.00
9150.00
1436.00
1436.00
1436.00
1436.00
1436.00
1436.00
1436.00
M-20
M-25
M-30
M-35
M-40
M-20
M-25
M-30
M35
M-40
M-45
M-50
207
ITEM
NO.
Unit
2
i
ii
iii
iv
v
vi
vii
49
M-20
M-25
M-30
M35
M-40
M-45
M-50
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
5726.00
6591.00
6901.00
7006.00
8327.00
8705.00
8810.00
1005.00
1005.00
1005.00
1005.00
1005.00
1005.00
1005.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
6080.00
6245.00
6555.00
6666.00
1276.00
1276.00
1276.00
1276.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
6540.00
6705.00
6961.00
7126.00
1680.00
1680.00
1680.00
1680.00
A
i
ii
iii
iv
208
ITEM
NO.
Unit
2
i
ii
iii
iv
50
M-20
M-25
M-30
M-35
Completed
Labour
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
6200.00
6365.00
6621.00
6786.00
1112.00
1112.00
1112.00
1112.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
8032.00
9348.00
9853.00
9958.00
10063.00
1671.00
1671.00
1671.00
1671.00
1671.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
7692.00
9008.00
9513.00
9618.00
9723.00
1170.00
1170.00
1170.00
1170.00
1170.00
M-35
M-40
M-45
M-50
M-55
209
ITEM
NO.
1
Unit
Completed
Labour
51
M.T.
177072.00
7594.00
52
Sq.Mt.
1879.00
679.00
53
R.Mt.
443.00
5.00
54
R.Mt.
24.00
5.00
55
R.Mt.
1045.00
38.00
210
ITEM
NO.
Unit
Completed
Labour
56
R.Mt.
23816.00
1032.00
57
R.Mt.
3262.00
27.00
R.Mt.
10503.00
27.00
58
211
ITEM
NO.
Unit
Completed
Labour
Sq.Mt.
Sq.Mt.
Sq.Mt.
375.00
387.00
400.00
48.00
48.00
48.00
i M-20
ii M-25
iii M-30
With Fully Automatic Micro Processor based
PLC with SCADA enabled concrete Batch Mix
Plant (PAN Mixer). With crushed sand. (RMC)
Sq.Mt.
Sq.Mt.
Sq.Mt.
410.00
423.00
436.00
52.00
52.00
52.00
i M-20
ii M-25
iii M-30
Sq.Mt.
Sq.Mt.
Sq.Mt.
383.00
396.00
409.00
52.00
52.00
52.00
1
59
212
ITEM
NO.
Unit
Completed
Labour
5
60
Sq.Mt.
353.00
54.00
61
No.
380.00
28.00
No.
682.00
165.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
3136.00
3466.00
4192.00
445.00
445.00
445.00
62
63
A
i
ii
iii
213
ITEM
NO.
Unit
2
i C.C. 1: 4: 8
ii C.C. 1: 3: 6
iii C.C. 1: 2: 4
Completed
Labour
5
Cu.Mt.
Cu.Mt.
Cu.Mt.
3396.00
3726.00
4452.00
633.00
633.00
633.00
64
Cu.Mt.
660.00
307.00
65
Sq.Mt.
1016.00
109.00
Cu.Mt.
4440.00
483.00
214
ITEM
NO.
Unit
Completed
Labour
5
67
Cu.Mt.
8737.00
483.00
68
R.Mt.
R.Mt.
1242.00
1347.00
578.00
578.00
i M-20
ii M-25
R.Mt.
R.Mt.
1413.00
1518.00
632.00
632.00
R.Mt.
R.Mt.
1362.00
1467.00
632.00
632.00
215
ITEM
NO.
Unit
Completed
Labour
5
69
R.Mt.
2564.00
387.00
70
2120.00
2225.00
578.00
578.00
i M-20
ii M-25
R.Mt.
R.Mt.
2360.00
2465.00
632.00
632.00
R.Mt.
R.Mt.
2240.00
2345.00
632.00
632.00
216
ITEM
NO.
Unit
Completed
Labour
71
Sq.Mt.
9020.00
2550.00
72
M.T.
8920.00
3165.00
73
M.T.
14015.00
74
M.T.
23588.00
2476.00
217
ITEM
NO.
Description
2
Providing and applying approved quality coal tar
epoxy paint in three coats for surface of well,
pier abutment between L.T.L. to 0.90 metre
above H.F.L. including cleaning surface,
scaffolding etc. complete
Spec. No.: MORT&H 1600
Painting on concrete surface :-Providing and
applying 2 coat of water based cement paint to
un plastered concrete surface after cleaning the
surface of dirt, dust, oil, grease, efflorescence
and applying plaint of 1 litre for 2 Sq.m.)
Spec. No.: MORT & H 2800,
75
76
Completed
Labour
Sq.Mt.
325.00
70.00
Sq.Mt.
124.00
16.00
77
Sq.Mt.
82.00
..
78
Sq.Mt.
765.00
122.00
218
ITEM
NO.
Unit
Completed
Labour
5
79
Sq.Mt.
660.00
165.00
80
11317.00
1205.00
81
219
Kg.
780.00
88.00
ITEM
NO.
Unit
Completed
Labour
5
82
No.
1288.00
167.00
83
Sq.Mt.
395.00
31.00
84
Sq.Mt.
493.00
30.00
85
Sq.Mt.
2196.00
164.00
86
Cu.Mt.
5724.00
1325.00
220
ITEM
NO.
1
Unit
Completed
Labour
Cu.Mt.
847.00
212.00
88
Cu.Mt.
1579.00
269.00
89
Cu.Mt.
4526.00
591.00
90
Cu.Mt.
743.00
266.00
91
Cu.Mt.
4208.00
537.00
221
ITEM
NO.
Unit
Completed
Labour
5
92
Cu.Mt.
1030.00
430.00
93
Sq.Mt.
856.00
109.00
94
Cu.Mt.
4045.00
1021.00
95
Cu.Mt.
5637.00
773.00
96
Cu.Mt.
1558.00
856.00
Cu.Mt.
1582.00
91.00
97
222
ITEM
NO.
1
Unit
Completed
Labour
Cu.Mt.
3133.00
334.00
99
Sq.Mt.
153.00
39.00
100
Sq.Mt.
120.00
28.00
223
ITEM
NO.
Description
Unit
Completed
Labour
Per sqmt of
wall facia
3328.00
--
do
3668.00
--
do
3884.00
--
do
4549.00
--
do
5417.00
--
do
5966.00
--
101
224
C. D. WORKS
ITEM
NO.
Description
Unit
3490.00
583.00
Cu.Mt.
Cu.Mt.
3629.00
3307.00
544.00
1109.00
Cu.Mt.
Cu.Mt.
4319.00
4515.00
523.00
551.00
Cu.Mt.
Cu.Mt.
4316.00
4512.00
523.00
551.00
Spec.No.CD-1,P-317 / 2012
C.C. 1:4:8
C.C. 1:3:6
225
C. D. WORKS
ITEM
NO.
Description
Unit
Cu.Mt.
4082.00
743.00
Cu.Mt.
4319.00
1280.00
Cu.Mt.
4316.00
1285.00
Cu.Mt.
489.00
125.00
Sq.Mt.
1305.00
442.00
a
b
6
226
C. D. WORKS
ITEM
NO.
1
8
Description
Unit
2
Providing approved quality of trap/ granite/
quartzite/ gneiss khandki stone paving
20.50cm.thick in 1:3 cement mortar over a
bedding of 15cm.thick cement concrete of 1:4:8
proportion with trap/ granite/ quartzite/ gneiss
metal including pointing with cement motar 1:3
and watering etc. complete.
Sq.Mt.
1526.00
5
584.00
Cu.Mt.
294.00
74.00
Cu.Mt.
8908.00
2520.00
Cu.Mt.
3490.00
640.00
No.
333.00
66.00
No.
401.00
90.00
Spec.No.CD-3,P-318 / 2012
9
10
11
12
13
14
227
C. D. WORKS
ITEM
NO.
Description
Unit
a)
R.Mt.
330.00
237.00
b)
R.Mt.
409.00
292.00
R.Mt.
R.Mt.
R.Mt.
R.Mt.
524.00
586.00
684.00
727.00
368.00
416.00
489.00
530.00
R.Mt.
R.Mt.
R.Mt.
697.00
814.00
865.00
515.00
604.00
644.00
R.Mt.
R.Mt.
R.Mt.
No.
697.00
814.00
865.00
456.00
515.00
604.00
644.00
365.00
c) 750mm diameter
d) 900mm diameter
e) 1000mm diameter
f) 1200mm diameter
15
Laying cement concrete pipe of IS 458-1988 Np3 for M.D.R.&S.H Class in proper line level &
slope including providing fixing collars in cement
motar 1:2 etc.complete. Diameter 900 mm
Spec.No.CD-5,P319 / 2012
a
b
c
16
17
900mm diameter
1000mm diameter
1200mm diameter
Laying cement concrete pipe of IS 458-1988 Np4 for MSH&NH. Class in proper line level & slope
including providing fixing collars in cement motar
1:2 etc.complete. Diameter 900 mm
a
b
c
Spec.No.CD-5,P319 / 2012
900mm diameter
1000mm diameter
1200mm diameter
Providing and fixing in cement mortar 1:2, marble
plate 30cm. x 20cm. showing the No. of Cross
Drainage work and the direction of flow by arrow
including cutting border line, figures, letters, signs
and painting etc. complete.
Spec.No.CD-10,P-322 / 2012
228
BORING
ITEM
NO.
Description
Completed
4
Labour
5
229
R.M.
R.M.
R.M.
1727.00
1959.00
2256.00
113.00
113.00
113.00
R.M.
2398.00
116.00
R.M.
2005.00
116.00
ITEM
NO.
Description
Labour
5
Completed
4
230
R.M.
3908.00
116.00
R.M.
2454.00
116.00
R.M.
511.00
488.00
No.
2780.00
547.00
No.
No.
No.
12763.00
22940.00
29990.00
3073.00
6147.00
5735.00
ITEM
NO.
Description
Completed
4
Labour
5
No.
No.
No.
92257.00
96768.00
133670.00
5309.00
5309.00
5309.00
No.
3555.00
3465.00
No.
No.
No.
300.00
396.00
596.00
233.00
312.00
466.00
per test
per test
per test
per test
per test
per test
per test
244.00
244.00
484.00
484.00
363.00
484.00
484.00
Spec.
Conducting standard pentration test on soil, sand by
split spoon sample for--a/b/c--diameter bore hole
including labour & material etc. complete.(Equipment
and materials is to be supplied by Department free of
cost).
Spec.
a) 75mm
b) 100mm
c) 150mm
10
1)
2)
3)
4)
5)
6)
7)
231
ITEM
NO.
Description
2
8)
9)
10)
11)
12)
i)
ii)
iii)
iv)
v)
i)
ii)
iii)
i)
ii)
iii)
iv)
11
i)
ii)
iii)
12
i)
ii)
iii)
13
i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
232
Completed
4
per test
per test
per test
per test
per test
363.00
363.00
484.00
484.00
1089.00
per test
per test
per test
per test
per test
1452.00
1562.00
1694.00
1562.00
1391.50
per test
per test
per test
1331.00
1210.00
1562.00
per test
per test
per test
per test
1089.00
1089.00
484.00
1562.00
per test
per test
per test
484.00
per test
per test
per test
484.00
605.00
605.00
per test
per test
per test
per test
per test
per test
per test
per test
1562.00
484.00
484.00
484.00
484.00
4840.00
1452.00
1452.00
Labour
5
Description
Unit
Completed Labour
4
Km.
721.00
Km.
1060.00
Km.
1268.00
Km.
1522.00
Km.
2790.00
233
ITEM
NO.
Description
Unit
Km.
3044.00
Km.
2790.00
No.
3217.00
1108.00
etc. complete.
Taking trial pit 1.0 x 1.0 x 1.5 mtr.at 200 metre interval
and minimum 3 numbers for small stream in earth soil of
all types, sand, gravel, soft murum etc. complete.
Spec. - As directed by Engineer-In-Charge.
No.
263.00
263.00
10
Taking trial pit 1.0 x 1.0 x 1.5 mtr.at 200 metre interval
and minimum 3 numbers for small stream in hard murum
and boulders etc.complete.
Spec. - As directed by Engineer-In-Charge.
No.
263.00
263.00
11
Km.
1049.00
224.00
12
Km.
196.00
134.00
234
ITEM
NO.
Description
Unit
Completed Labour
4
13
No.
603.00
96.00
14
No.
248.00
46.00
15
No.
457.00
438.00
No.
1350.00
1125.00
17
No.
4565.00
3988.00
No.
1522.00
1480.00
19
No.
15218.00
13294.00
235
ITEM
NO.
Description
Unit
20
No.
12098.00
11080.00
Sq.Km.
29041.00
26591.00
Km.
2660.00
2437.00
No.
4843.00
4823.00
No.
2178.00
1995.00
No.
2178.00
1995.00
Km.
2246.00
1329.00
Completed Labour
4
22
23
24
25
26
236
ITEM
NO.
Description
Unit
27
Completed Labour
4
Km.
5213.00
3102.00
No.
4197.00
1995.00
28
237
Description
Unit
Labour
Km
Km
8382.00
9842.00
No.
150.00
Km
7418.00
As directed by Engineer-In-Charge.
3
Job
360.00
Km
2700.00
Km
4708.00
As directed By Engineer-In-Charge.
Providing '7' copies of computor printouts of plans duly
bound in the form of booklet.
As directed By Engineer-In-Charge.
238
ITEM
NO.
Description
Unit
Km
5533.00
No.
400.00
Job
3191.00
Job
Job
3926.00
4677.00
Completed
Labour
10
A
di t detailed
d b E estimate
i
I Ch
Preparing
of C.D.Works with fine
typed copies in proper file, including taking out Lsection of road,preparing catchment area plan by
traverse method, taking one trial pit of size 1.0 x 1.0 x
1.5 mtr. with all types of compliance, if required from
department etc.complete.
a) excluding taking trial pit.
b) including taking trial pit
239
ITEM
NO.
Description
Unit
11
12
13
14
As directed by Engineer-In-Charge.
a) excluding taking trial pit.
Job
b) including taking trial pit.
job
Carrying out Contour survey of stream on U/S and
D/S of proposed bridge site,including chain and
compass survey, taking levels at every 30 x 30 metre,
preparing contour map and supplying ammonia prints
in 5 sets etc.complete
As directed by Engineer-In-Charge.
a) excluding chain and compass survey.
Sq.Km
b) including chain and compass survey.
Sq.Km
Job
Preparing plans and estimates of minor bridge with
the help of approved detailed survey data given by the
competent authority, including typing in 5 copies,
ammonia prints, site plan, other drawings with
colouring of plans, proper filling, indexing and and
paging,with all types of compliacne, if required from
department etc.complete.
As directed by Engineer-In-Charge.
Carrying out detailed survey of major bridge
including taking out L-section of existing road, two
define cross sections for,one at U/S and second at
D/S, one vergin cross section at alternate proposed
site, L-section of stream upto sufficient lengths with
chain and compass, taking five trial pits, three in bed
and two on banks of size 2.00 x 2.00 x 3.00
m,collecting samples from trial pit, sending samples to
Government approved laboratories (testing charges to
he borne by agency) for ascertaining the silt factor,
carrying out unit test & specific gravity,
240
Completed
Labour
24219.00
29054.00
25016.00
29334.00
6137.00
ITEM
NO.
Description
Unit
Job
Job
Job
35945.00
47252.00
6661.00
Job
Job
13750.00
16854.00
15
16
Labour
As directed by Engineer-In-Charge.
Carrying out detailed survey of Raised cause way
including taking L-section of existing road, taking two
define cross sections for, one at vergin, one at
alternate proposed site,taking L-section of stream upto
sufficient length with chain and compass, taking two
trial pits of size 2.00 x 2.00 x 3.00 m.,collecting sample
from trial pits sending samples to Government
approved laboratory (testing charges to he borne by
agency) for ascertaining the silt factor,carrying out unit
test & specific gravity, preparation of detailed survey
data and submission of the project fully typed
copies,colouring of the ammonia prints, site plan and
other drawings with all types of compliance if required
from department etc.complete.
As directed by Engineer-In-Charge.
a) excluding taking trial pit.
b) including taking trial pit.
241
ITEM
NO.
Description
Unit
17
18
242
Completed
Labour
Job
5521.00
Tal.
8190.00
ITEM
NO.
Description
Unit
Completed
Labour
19
Job
3026.00
20
Dist.
4036.00
Per day
9853.00
As directed by Engineer-In-Charge.
21
As directed by Engineer-In-Charge.
243
ITEM
NO.
Description
Unit
22
Completed
Labour
Sqm.
6.00
Sqm.
4.00
244
VIDEOGRAPHY
ITEM
NO.
1
Description
Unit
Cassette
hour.
2152.00
Day
Day
Day
4192.00
5380.00
2351.00
3 Copies
1 each
3 Copies
1 each
3 Copies
1 each
77.00
22.00
105.00
22.00
175.00
35.00
A) a)
b)
B) a)
b)
c) a)
b)
4
245
ITEM
NO.
1
i)
ii)
iii)
iv)
v)
5
Description
Unit
AO ( 1165 X 817mm )
A1 ( 817 X 570mm )
A2 ( 570 X 396mm )
A3 ( 396 X 275mm )
A4 ( 285 X 196mm )
1 each
1 each
1 each
1 each
1 each
768.00
615.00
537.00
461.00
307.00
1 each
1 each
1 each
1 each
1 each
2460.00
1845.00
1538.00
1229.00
768.00
1 each
1 each
1 each
1 each
1 each
922.00
768.00
691.00
537.00
378.00
AO ( 1165 X 817mm )
A1 ( 817 X 570mm )
A2 ( 570 X 396mm )
A3 ( 396 X 275mm )
A4 ( 285 X 196mm )
AO ( 1165 X 817mm )
A1 ( 817 X 570mm )
A2 ( 570 X 396mm )
A3 ( 396 X 275mm )
A4 ( 285 X 196mm )
246
247
19.5
19.5
20
20
25
25
30
30
35
35
35
35
40
40
8.00
9.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
60.00
70.00
80.00
19
19
18.5
5.00
6.00
18.5
4.50
7.00
18
18
3.50
17.5
3.00
4.00
17
17.5
16.5
1.50
2.50
16
2.00
15
0.50
1.6
1.78
1.81
2.07
2.24
2.43
2.4
2.67
2.67
3.08
3.2
4.16
4.39
4.61
4.9
5.19
5.38
5.54
5.76
5.96
6.22
6.48
6.77
7.11
7.5
262
255.2
223.2
213
207.6
200.4
174
166.2
139.5
129.2
102
86
80.88
76.24
70.54
64.8
57.9
54.42
50.32
46.32
41.76
37.1
31.92
26.31
20.22
13.5
65.5
63.8
55.8
53.25
51.9
50.1
43.5
41.55
34.88
32.3
25.5
21.5
20.22
19.06
17.64
16.2
14.48
13.61
12.58
11.58
10.44
9.28
7.98
6.58
5.06
3.38
3722
3625
3171
3026
2949
2847
2472
2361
1982
1835
1449
1222
1149
1083
1002
920.5
822.8
773.3
714.8
658
593.2
527.3
453.4
373.9
287.5
192.1
1.49
1.45
1.41
1.36
1.33
1.29
1.24
1.05
0.92
0.82
0.61
0.58
0.54
0.5
0.46
0.41
0.39
0.36
0.33
0.3
0.26
0.23
0.19
0.14
0.1
2538.00
2538.00
2538.00
2538.00
399.3 2538.00
388.6 2538.00
377.9 2538.00
364.5 2538.00
356.4 2538.00
345.7 2538.00
332.3 2538.00
281.4 2538.00
268
246.6 2538.00
219.8 2538.00
163.5 2538.00
155.4 2538.00
144.7 2538.00
134
123.3 2538.00
109.9 2538.00
104.5 2538.00
96.48 2538.00
88.44 2538.00
80.4
69.68 2538.00
61.64 2538.00
50.92 2538.00
37.52 2538.00
26.8
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
3200
1.00
Lead
in
kms
L
1
9859.03
9751.72
9286.44
9128.15
9043.40
8930.40
8541.99
8380.27
7987.88
7819.85
7406.67
7123.11
7042.34
6965.71
6874.30
6781.76
6670.63
6615.84
6549.28
6484.42
6411.60
6334.97
6253.06
6162.80
6063.03
5956.85
Rs.
12
Total
Cost
9947.74
9823.44
9396.19
9218.30
8786.67
8601.83
8147.34
7835.42
7746.57
7662.28
7561.73
7459.94
7337.69
7277.42
7204.21
7132.86
7052.76
6968.47
6878.37
6779.08
6669.33
6552.54
Rs.
14
Gross
Total
4440.95
4042.57
3915.08
3452.55
3290.89
2792.80
2546.04
1958.86
1862.16
1745.39
1640.29
1522.44
1413.81
1352.68
1300.40
1238.34
1183.35
1120.33
1061.48
1001.34
938.02
873.67
Cost
per trip
(14/4)
Rs.
15
985.9
10844.93 6778.08
904.34
893.04
854.2
838.03
798.79
781.98
740.67
712.31
704.23
696.57
687.43
678.18
667.06
661.58
654.93
648.44
641.16
633.5
625.31
616.28
606.3
595.69
10%
overhead
chrges
Rs.
13
Transportation charges over distance 0.05 to 200.00 kms. Including loading & unloading charges.
80.00
70.00
60.00
50.00
45.00
40.00
35.00
30.00
25.00
20.00
15.00
10.00
9.00
8.00
7.00
6.00
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
Lead
in
kms
L
16
248
40
40
175.00
200.00
0.73
0.82
0.94
1.1
1.33
1.45
298
293
288
281
272
267
74.5
73.25
72
70.25
68
66.75
4233
4162
4091
3992
3864
3793
2.12
2.09
2.06
2.01
1.53
1.51
2538.00
568.2 2538.00
560.1 2538.00
552.1 2538.00
538.7 2538.00
410
404.7 2538.00
3200
3200
3200
3200
3200
3200
Rs.
14
Gross
Total
Cost
per trip
(14/4)
Rs.
15
10%
overhead
chrges
Rs.
13
100.00
90.00
Lead
in
kms
L
16
9935.42
Rs.
12
Total
Cost
40
40
125.00
40
100.00
150.00
40
90.00
Lead
in
kms
L
1
249
1238.34
1300.40
1352.68
1413.81
1522.44
1640.29
1745.39
1862.16
1958.86
2546.04
2792.80
3290.89
3452.55
3915.08
4042.57
4440.95
4850.70
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
2.50
3.50
1120.33
2.00
1183.35
1061.48
1.50
3.00
938.02
1001.34
1.00
808.45
740.16
673.76
652.51
575.42
548.48
465.47
424.34
326.48
310.36
290.90
273.38
253.74
235.64
225.45
216.73
206.39
197.22
186.72
176.91
166.89
156.34
145.61
873.67
Cumt
Unit
0.50
6.00
(Cum)
Earth,
Murum,
Building
Rubish
Task /
Trip
843.60
772.34
703.06
680.88
600.44
572.33
485.70
442.79
340.67
323.85
303.55
285.27
264.77
245.88
235.25
226.16
215.36
205.80
194.84
184.60
174.15
163.13
151.94
Cumt
5.75 (Cum)
Sand,
crushed
Metal,
Stone
below
40mm,
normal
brick
881.95
807.45
735.01
711.83
627.74
598.34
507.78
462.92
356.16
338.57
317.34
298.23
276.81
257.06
245.94
236.44
225.15
215.15
203.70
193.00
182.06
170.55
158.85
Cumt
5.50
(Cum)
Hand
brokan
metal
aggre.
40mm
normal
size &
above
1032.06
944.88
860.12
833.00
734.58
700.19
594.21
541.71
416.78
396.20
371.36
349.00
323.92
300.81
287.80
276.68
263.48
251.78
238.37
225.85
213.05
199.58
185.89
Cumt
538.97
493.44
449.17
435.01
383.62
365.65
310.31
282.89
217.65
206.91
193.93
182.25
169.16
157.09
150.30
144.49
137.59
131.48
124.48
117.94
111.26
104.22
97.07
per M.T.
646.76
592.13
539.01
522.01
460.34
438.79
372.37
339.47
261.18
248.29
232.72
218.71
202.99
188.51
180.36
173.39
165.11
157.78
149.38
141.53
133.51
125.07
116.49
per M.T.
107.79
98.69
89.83
87.00
76.72
73.13
62.06
56.58
43.53
41.38
38.79
36.45
33.83
31.42
30.06
28.90
27.52
26.30
24.90
23.59
22.25
20.84
19.41
per no.
Bulk
Asphalt in
Steel,
Rubble
Drum
Excavated Cement, Bituman
R.C.C.
Rock
Blocks,
soiling
G.I. Sheet
stone
1385.92
1268.84
1155.02
1118.59
986.44
940.25
797.94
727.44
559.67
532.04
498.68
468.65
434.98
403.95
386.48
371.54
353.81
338.10
320.10
303.28
286.10
268.01
249.62
10
per
1000no.
3500
(No)
Bricks
808.45
740.16
673.76
652.51
575.42
548.48
465.47
424.34
326.48
310.36
290.90
273.38
253.74
235.64
225.45
216.73
206.39
197.22
186.72
176.91
166.89
156.34
145.61
11
Cumt
970.14
888.19
808.51
783.02
690.51
658.18
558.56
509.21
391.77
372.43
349.08
328.06
304.49
282.76
270.54
260.08
247.67
236.67
224.07
212.30
200.27
187.60
174.73
12
44.10
40.37
36.75
35.59
31.39
29.92
25.39
23.15
17.81
16.93
15.87
14.91
13.84
12.85
12.30
11.82
11.26
10.76
10.18
9.65
9.10
8.53
7.94
13
161.69
148.03
134.75
130.50
115.08
109.70
93.09
84.87
65.30
62.07
58.18
54.68
50.75
47.13
45.09
43.35
41.28
39.44
37.34
35.38
33.38
31.27
29.12
14
Rmt.
323.38
296.06
269.50
261.01
230.17
219.39
186.19
169.74
130.59
124.14
116.36
109.35
101.50
94.25
90.18
86.69
82.56
78.89
74.69
70.77
66.76
62.53
58.24
15
Rmt.
970.14
888.19
808.51
783.02
690.51
658.18
558.56
509.21
391.77
372.43
349.08
328.06
304.49
282.76
270.54
260.08
247.67
236.67
224.07
212.30
200.27
187.60
174.73
16
Rmt.
5 Rmt.
Concrete
block &
Laterite
Stone.
881.95
807.45
735.01
711.83
627.74
598.34
507.78
462.92
356.16
338.57
317.34
298.23
276.81
257.06
245.94
236.44
225.15
215.15
203.70
193.00
182.06
170.55
158.85
17
Cumt
L.F. 5.50
(Unit
Cum)
Hot Mix
Bituminou
s Material
250
6778.08
7537.21
8280.44
10268.29
12148.12
14031.96
80.00
90.00
100.00
125.00
150.00
175.00
15881.07
6026.34
200.00
5643.69
70.00
2646.84
2338.66
2024.69
1711.38
1380.07
1256.20
1129.68
1004.39
940.61
Cumt
Unit
60.00
6.00
(Cum)
Earth,
Murum,
Building
Rubish
Task /
Trip
2761.92
2440.34
2112.72
1785.79
1440.08
1310.82
1178.80
1048.06
981.51
Cumt
5.75 (Cum)
Sand,
crushed
Metal,
Stone
below
40mm,
normal
brick
2887.47
2551.26
2208.75
1866.96
1505.53
1370.40
1232.38
1095.70
1026.13
Cumt
5.50
(Cum)
Hand
brokan
metal
aggre.
40mm
normal
size &
above
3378.95
2985.52
2584.71
2184.74
1761.79
1603.66
1442.14
1282.20
1200.78
Cumt
1764.56
1559.11
1349.79
1140.92
920.05
837.47
753.12
669.59
627.08
per M.T.
2117.48
1870.93
1619.75
1369.10
1104.06
1004.96
903.74
803.51
752.49
per M.T.
352.91
311.82
269.96
228.18
184.01
167.49
150.62
133.92
125.42
per no.
Bulk
Asphalt in
Steel,
Rubble
Drum
Excavated Cement, Bituman
R.C.C.
Rock
Blocks,
soiling
G.I. Sheet
stone
4537.45
4009.13
3470.89
2933.80
2365.84
2153.49
1936.59
1721.81
1612.48
per
1000no.
3500
(No)
Bricks
2646.84
2338.66
2024.69
1711.38
1380.07
1256.20
1129.68
1004.39
940.61
Cumt
3176.21
2806.39
2429.62
2053.66
1656.09
1507.44
1355.62
1205.27
1128.74
144.37
127.56
110.44
93.35
75.28
68.52
61.62
54.78
51.31
529.37
467.73
404.94
342.28
276.01
251.24
225.94
200.88
188.12
Rmt.
1058.74
935.46
809.87
684.55
552.03
502.48
451.87
401.76
376.25
Rmt.
3176.21
2806.39
2429.62
2053.66
1656.09
1507.44
1355.62
1205.27
1128.74
Rmt.
5 Rmt.
Concrete
block &
Laterite
Stone.
2887.47
2551.26
2208.75
1866.96
1505.53
1370.40
1232.38
1095.70
1026.13
Cumt
L.F. 5.50
(Unit
Cum)
Hot Mix
Bituminou
s Material
Statement 'C2'
LOADING, UNLOADING & STACKING
Rates for 2015-16
Loading
Unloading Stacking
carriage
carriage carriageupto
upto 50 m upto 50 m
50 m lead
lead
lead
Sr.
No.
Materials
Unit
Cu.m.
27.47
17.17
17.17
Cu.m.
15.45
10.30
10.30
Cement, Lime
M.T.
53.23
44.63
20.60
M.T.
56.65
48.08
34.34
Bricks
1000 Nos.
34.34
29.19
17.17
Shahabad Stones
Sq.M.
1.90
1.90
1.90
1000 Nos.
20.60
15.45
15.45
M.T.
53.23
53.23
13.74
Timber
Cu.m.
22.32
22.32
9.45
10
Flooring tiles
1000 Nos.
32.61
26.62
20.60
11
M.T.
46.35
46.35
27.47
Unit
2014-2015
2015-2016
Cu.m.
21.18
30.90
Description of leads
0 metres to 50 metres (initial lead 50mt.)
Cu.m.
15.97
23.30
Cu.m.
25.41
37.00
251
MATERIAL RATES
Sr No
Description
Unit
Rate `
Building-Bd-A : Excavation
1
2
3
4
5
6
7
8
9
Blasting Powder
Detonator
Fuse
Nipple For Fastening Detenator
Noble Dynamite
Red Tape Safety Fuse
Soft Murum
Quarry Spoul
Rubble Stone (Blasted)
1
2
3
4
5
6
7
8
4
5
6
7
8
9
10
11
1
2
3
1
2
3
252
Kilogram
Number
Number
Number
Kilogram
Running Meter
Cu.Mt.
Cu.Mt.
Cu.Mt.
223.00
70.50
29.50
34.60
160.00
54.00
92.00
235.00
328.00
Cu.Mt.
Cu.Mt.
Cu.Mt.
Cu.Mt.
Kg
Cu.Mt.
Cu.Mt.
No.
1500.00
1000.00
717.00
714.00
100.00
1710.00
704.00
2.00
Number
Number
Litre
270.00
10.00
357.00
Litre
M.T.
No.
Running Meter
Running Meter
Kilogram
Metric Tonne
Number
187.00
47250.00
138.00
197.00
390.00
27.50
56000.00
8.00
Cubic Meter
Cubic Meter
Cu.Mt.
610.00
1500.00
717.00
Sr No
4
5
Description
Unit
Aggregate 12 mm
Jungle wood (non teak) normal
Cu.Mt.
Cubic Meter
Rate `
714.00
32899.00
Binding Wire
Centering Oil
Plastic Cover Block
R.C.C.Jali 50mm thick
Plastizer (Rheobuild) 825 RMt.
Concrete Spacer Block 15 mm
Concrete Spacer Block 20 mm
Concrete Spacer Block 25 mm
Concrete Spacer Block 30 / 40 mm
Cover Block Lumpsum
Plasticizer
Fly Ash
Kilogram
Litre
Number
Square Meter
Litre
Number
Number
Number
Number
Number
Cubic Meter
Cubic Meter
118.00
87.00
18.00
641.00
115.00
1.90
2.10
2.30
3.65
450.00
115.00
8.00
1
2
3
4
5
6
Number
1000 Nos.
1000 Nos.
bags
Cubic Meter
1000 Nos.
35.00
5280.00
5280.00
330.00
1500.00
7350.00
1
2
3
4
5
6
7
8
9
10
11
Number
Number
Cubic Meter
Number
Number
Number
Number
Number
Number
Cubic Meter
Kilogram
79.00
88.00
102.00
61.00
93.00
68.00
235.00
84.00
84.00
328.00
79.00
253
Sr No
Description
Unit
Rate `
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
G.I.Screw 50mm
1
2
254
Number
Number
Number
Number
Number
Number
Kilogram
Kilogram
Kilogram
Cubic Meter
Running Meter
Litre
Square Meter
Kilogram
Square Meter
Kilogram
Litre
Square Meter
Cubic Meter
Quintal
Litre
Litre
Kg
Kilogram
Kilogram
Kilogram
Kilogram
Square Meter
Cubic Meter
Square Meter
Square Meter
Cubic Meter
46.00
33.60
54.00
42.00
50.00
67.00
104.00
79.00
104.00
644.00
127.00
120.00
88.00
79.00
136.00
130.00
330.00
250.00
721.00
586.00
195.00
160.00
448.00
448.00
446.00
306.00
1068.00
300.00
727.00
245.00
370.00
74526.00
Dozon
10.00
Kilogram
Kilogram
446.00
446.00
Sr No
Description
Unit
3
4
5
6
7
8
9
10
11
12
13
14
15
Polydee-TP42 Primer
Polydee-LM
Polydee-LM.
Polydee-LM 150mm width
Bituflex Cloesdcell foam 30x30 mm
AG 10 Granules
Polydee-41 sealant and polyseal
Polydee-MC
Polydee-11
Bitumen pad 12 mm thick
Hold fast Iron 300*40*5mm
Aluminium Section
Stainless Steel Plate 202 grade
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
13
255
Rate `
Litre
Kilogram
Kilogram
Running Meter
Running Meter
Kilogram
Kilogram
Kilogram
Kilogram
Square Meter
Number
Kilogram
Kilogram
160.00
448.00
448.00
482.00
48.00
14.00
375.00
306.00
1068.00
870.00
51.00
381.00
210.00
Kilogram
bags
Kilogram
bags
Kilogram
Kilogram
Kilogram
Kilogram
Kilogram
12.00
1000.00
100.00
220.00
42.00
29.12
42.00
104.00
11.00
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
245.00
275.00
275.00
350.00
300.00
370.00
350.00
360.00
480.00
320.00
Square Meter
Square Meter
Square Meter
349.00
510.00
420.00
Sr No
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Description
Unit
256
Rate `
Square Meter
440.00
Square Meter
460.00
Square Meter
440.00
Square Meter
560.00
Square Meter
530.00
Square Meter
610.00
Number
Number
Square Meter
Square Meter
Square Meter
Square Meter
39.00
48.00
368.00
405.00
468.00
475.00
Square Meter
352.00
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
506.00
660.00
825.00
320.00
666.00
Square Meter
666.00
Square Meter
787.50
Square Meter
787.50
Square Meter
787.50
Square Meter
544.50
Square Meter
544.50
Square Meter
Square Meter
Square Meter
2800.00
2000.00
850.00
Rate `
Sr No
Description
Unit
41
Square Meter
910.00
Square Meter
1170.00
Square Meter
935.00
Square Meter
1029.00
Square Meter
1149.75
Kilogram
Kilogram
bags
Kilogram
Square Meter
42.00
104.00
1750.00
42.00
605.00
Square Meter
Dozon
Square Meter
Square Meter
Square Meter
Square Meter
Cubic Meter
Square Meter
Square Meter
Square Meter
92.00
300.00
756.00
2200.00
165.00
497.00
25.00
519.00
3000.00
675.00
Square Meter
Square Meter
Square Meter
Kilogram
Kilogram
Dozon
Dozon
Square Meter
Cubic Meter
Kilogram
Square Meter
Square Meter
445.00
460.00
510.00
23.20
50.00
255.00
273.00
828.00
1000.00
17.00
2800.00
605.00
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
257
Sr No
Description
Unit
Rate `
Bees wax
Coal Tar
French Polish
Varnish
Malemaine Polish
C.C.T.W. Ballies 125 mm Diameter
Kilogram
Kilogram
Litre
Litre
Litre
Running Meter
97.00
71.00
179.00
351.00
665.00
162.00
Litre
357.00
Litre
Kilogram
Litre
Kilogram
Litre
Litre
Litre
Litre
Litre
Litre
Number
Number
Litre
Litre
Kilogram
357.00
425.00
187.00
146.00
170.00
165.00
162.00
150.00
91.00
237.00
97.00
257.00
270.00
370.00
50.00
Kilogram
Kilogram
Kilogram
Kilogram
Number
Kilogram
Litre
Kilogram
Kilogram
237.00
182.00
35.00
137.00
84.00
83.00
265.00
30.50
425.00
1
2
3
4
5
6
7
8
9
Neel
Oil bound distemper
Red powder / Geru
Saras
Scrapping sand paper size (30x20cm)
Dry distemper
Plastic emulsion paint
Chunam / White lime Powder
Catonic emulsion paint
258
Sr No
Description
Unit
Rate `
1
2
Cubic Meter
Cubic Meter
88200.00
74526.00
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Cubic Meter
Cubic Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Cubic Meter
Number
Number
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
74208.00
80423.00
139.00
150.00
162.00
114.00
32.25
105.00
32899.00
125.00
164.00
46.00
736.00
589.00
1075.00
605.00
516.00
731.00
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Kilogram
Running Meter
Square Meter
728.00
609.00
234.00
324.00
354.00
388.00
735.00
424.00
410.00
410.00
414.00
649.00
847.00
700.00
256.00
80.00
1721.00
Number
Litre
26.00
237.00
38
39
259
Sr No
40
41
42
43
44
45
46
47
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Description
Unit
G.I.Screw 50mm
G.I. Nut Bolt
Nut Bolts 16mm dia.
French Polish
Handle 125mm M.S. Chromium Plated
Tower bolt M.S. Chromium plated 10mm dia,length
150mm
Stainless Steel Hinges - 75mm 14 gauge (Heavy
Duty)
Handle 125mm M.S. Chromium Plated
Building-Bd-R : Roofing and ceiling
A.C.Corrugated sheet 6mm thick
A.C. sheet (Trofford) 6mm thick
A.C.Plane sheet 6mm thick
A.C.Sheet ridge
A.C.Gutter sheet ridge
A.C. Sheet plain 4mm thick
G.C.I. Sheet (Corrugated) 22 BWG
G.C.I. Sheet (Corrugated) 24 BWG
G.I. Sheet (plain) 22 BWG
G.I. Sheet (plain) 24 BWG
G.I. Washers
G.I. J or L hooks 8 mm dia.
Nails iron all size
Mangalore tiles class AA
Mangalore Ridge / Hip tiles
Mangalore Glass tiles
Mangalore Pattern cowl Ventilator
Karva (for roof and sides 10kg bundle)
G.I. Precoated 0.60 mm (TCT) roof
G.I. Precoated Ridge Sheet
Gypsum powder
Aluminium sheeting fixed with encapsuled lens type
reflective sheeting including 2% towards lettering ,
cost of angle iron, cost of drilling holes , nuts, bolts
etc. and signs as applicable.
Corrugated sheet , 3mm thick , "Thrie" beam section
railing
Plaster Of Paris
Decorative Board of Fibrous Plaster of Paris 12 to
15 mm
260
Rate `
Dozon
Number
Kilogram
Litre
Number
Number
10.00
10.00
27.50
179.00
77.00
150.00
Number
200.00
Number
77.00
Square Meter
Square Meter
Square Meter
Pair
Running Meter
Square Meter
Metric Tonne
Metric Tonne
Square Meter
Square Meter
Kilogram
Number
Kilogram
Number
Number
Number
Number
Bundle
Square Meter
Running Meter
Kilogram
Square Meter
406.00
324.00
345.00
304.00
150.00
252.00
65885.00
65885.00
963.00
565.00
60.00
26.00
100.00
37.50
53.00
620.00
143.00
20.00
535.00
550.00
11.00
16392.00
Kilogram
70.00
bags
Square Meter
220.00
345.00
Sr No
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Description
Unit
Rate `
Square Meter
Square Meter
Square Meter
Number
Square Meter
Number
Running Meter
Running Meter
Running Meter
Square Meter
Square Meter
Number
Kilogram
Number
470.00
205.00
702.00
2.00
649.00
71.00
114.00
105.00
55.00
370.00
1235.00
10.00
60.00
220.00
Number
1200.00
Number
Number
Number
Number
Number
Number
Number
Number
238.00
135.00
1200.00
1250.00
1150.00
160.00
77.00
450.00
Number
298.00
11
Number
54.00
12
Number
84.00
13
14
15
16
17
18
19
Number
Number
Number
Number
Number
Number
Number
84.00
69.00
47.00
280.00
220.00
185.00
230.00
Number
84.00
1
2
3
4
5
6
7
8
9
10
20
261
Sr No
21
22
23
24
25
26
27
28
Description
Unit
37
38
Rate `
Number
Number
Number
Number
Number
Number
Number
Number
340.00
89.00
42.00
15.00
87.00
69.00
59.00
716.00
Dozon
Dozon
Dozon
Dozon
Dozon
Number
650.00
381.00
129.00
10.00
25.00
260.00
Number
350.00
Number
200.00
Number
107.00
Number
107.00
39
Number
143.00
40
Number
281.00
41
42
43
44
45
46
Number
Number
Number
Number
Number
Number
211.00
364.00
221.00
173.00
66.00
262.00
Number
220.00
Number
170.00
Number
150.00
Number
107.00
29
30
31
32
33
34
35
36
47
48
49
50
262
Sr No
Description
Unit
Rate `
51
Number
107.00
52
Number
91.00
53
Number
1088.00
Number
1262.00
Number
1324.00
Number
1380.00
Number
1426.00
Number
1352.00
Number
1065.00
Number
Number
Number
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Number
Number
Number
75.00
90.00
102.00
415.00
370.00
382.00
400.00
324.00
340.00
270.00
380.00
1235.00
51.00
138.00
220.00
Number
300.00
Square Meter
Number
Number
Number
Number
Number
Square Meter
1204.00
230.00
123.00
73.00
455.00
250.00
413.00
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
263
Sr No
Description
Unit
Rate `
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Square Meter
Square Meter
Square Meter
Square Meter
Number
Number
Number
Number
Number
Number
Number
Number
Number
Square Meter
Number
Number
Square Meter
495.00
1080.00
396.00
640.00
94.00
101.00
26.00
40.00
40.00
73.00
101.00
73.00
10.00
2457.00
855.00
742.00
1156.00
100
101
102
103
104
105
106
107
108
109
Number
Number
Number
Number
Number
Kilogram
Running Meter
Running Meter
Dozon
Number
5.00
75.00
50.00
60.00
40.00
381.00
114.00
40.00
12.00
145.00
Square Meter
Number
968.00
4500.00
Number
2936.00
Number
540.00
Number
Square Meter
Kilogram
250.00
115.00
155.00
Square Meter
600.00
110
111
112
113
114
115
116
117
264
Sr No
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
Description
Unit
265
Rate `
Number
Number
Kilogram
Number
Kilogram
Square Meter
Number
84.00
101.00
287.00
8.00
74.00
528.00
620.00
Kilogram
Square Meter
265.00
282.00
Square Meter
3140.00
Square Meter
3961.00
Square Meter
2542.00
Square Meter
2655.00
Running Meter
Square Meter
Square Meter
Square Meter
Number
Running Meter
Square Meter
39.00
365.00
290.00
545.00
26.00
914.00
3810.00
Square Meter
3750.00
Number
Running Meter
Running Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
Square Meter
1200.00
400.00
330.00
1614.00
1200.00
2500.00
452.00
1022.00
1231.00
589.00
605.00
609.00
410.00
157.00
Sr No
153
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Description
Unit
266
Rate `
Square Meter
1156.00
bags
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Litre
330.00
940.00
1064.00
110.00
125.00
158.00
197.00
197.00
225.00
253.00
290.00
295.00
345.00
390.00
467.00
494.00
599.00
635.00
741.00
71.00
20.00
69.00
10.00
15.00
119.00
166.00
282.00
339.00
280.00
291.00
356.00
357.00
7.75
Litre
7.90
Sr No
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
Description
Unit
267
Number
Number
Number
Number
Pair
Number
Number
Number
Number
Number
Number
Number
Number
Running Meter
Running Meter
Running Meter
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Rate `
315.00
95.00
94.00
87.00
100.00
285.00
265.00
642.00
242.00
166.00
1245.00
414.00
382.00
703.00
1257.00
700.00
410.00
410.00
231.00
444.00
1975.00
3200.00
245.00
395.00
336.00
405.00
157.00
1000.00
1200.00
600.00
900.00
25.00
950.00
700.00
1462.00
1550.00
13997.00
15009.00
336.00
885.00
29.00
1678.00
Sr No
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
Description
Unit
268
Rate `
Number
Number
Number
Number
Number
Number
Number
1249.00
2000.00
1678.00
1500.00
2100.00
2077.00
1155.00
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
2275.00
810.00
1320.00
1007.00
975.00
1706.00
1300.00
823.00
1300.00
975.00
1034.00
2200.00
886.00
3500.00
3134.00
1500.00
239.00
289.00
370.00
63.00
75.00
99.00
116.00
157.00
52.00
60.00
70.50
72.00
89.00
115.00
135.00
161.00
167.00
151.00
Sr No
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
Description
Unit
269
Rate `
Number
Number
Number
Number
Number
Number
Number
Running Meter
Running Meter
Running Meter
Number
Number
Number
Pair
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
1975.00
589.00
680.00
978.00
91.00
173.00
279.00
165.00
220.00
334.00
263.00
157.00
765.00
110.00
350.00
553.00
706.00
892.00
620.00
775.00
239.00
75.00
92.00
422.00
318.00
108.00
172.00
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Kilogram
Number
Number
223.00
204.00
325.00
177.00
572.00
299.00
624.00
2034.00
597.00
522.00
657.00
65.00
40.00
52.00
Sr No
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
Description
Unit
270
Running Meter
Running Meter
Running Meter
Kilogram
Number
Number
--Select-Number
Number
Number
Number
Number
Kilogram
Litre
Number
Number
Number
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Number
Kilogram
Kilogram
Number
Number
Number
Kilogram
Running Meter
Number
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Number
Running Meter
Rate `
100.00
311.00
395.00
190.00
389.00
70.50
270.00
316.00
900.00
570.00
348.00
275.00
98.00
423.00
128.00
385.00
272.00
67.00
80.00
115.00
140.00
148.00
348.00
68.00
414.00
125.00
20.00
150.00
85.00
30.00
50.00
155.00
161.00
170.00
78.75
119.75
140.00
245.00
245.00
310.00
425.00
370.00
Sr No
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
Description
Unit
271
Rate `
Running Meter
Number
Number
Number
Number
Number
Number
Number
Number
Number
370.00
8.00
8.00
15.00
18.00
25.00
30.00
35.00
750.00
3150.00
Number
2845.00
Number
2120.00
Number
1300.00
Number
750.00
Number
1000.00
Number
700.00
Number
3300.00
Number
1350.00
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Number
Number
Number
Number
55.00
73.00
110.00
175.00
257.50
430.50
231.00
206.00
444.00
1982.00
Number
1226.00
Sr No
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
Description
Unit
272
Rate `
Number
1796.00
Number
894.00
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Running Meter
Number
Running Meter
Running Meter
Number
Number
Number
Number
Number
Number
Number
375.00
425.00
895.00
1275.00
2200.00
3200.00
1228.00
1677.00
2074.00
7754.00
7826.00
7861.00
9064.00
1425.00
1745.00
4785.00
8150.00
961.00
2350.00
64.00
1597.00
1096.00
95.00
75.00
164.00
492.00
7.00
95.00
275.00
3481.00
5400.00
100.00
1210.00
Number
Number
456.00
1944.00
Sr No
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
Description
Unit
273
Rate `
Number
2680.00
Number
Number
2750.00
8540.00
Number
456.00
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Litre
Running Meter
Running Meter
Running Meter
Number
Number
Number
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Running Meter
Number
Number
Number
Number
Kilogram
8893.00
762.00
527.00
799.00
2820.00
83.50
223.00
87.60
255.00
542.00
95.00
179.20
401.25
95.00
325.00
308.00
529.00
815.00
48.00
525.00
452.00
47.50
64.00
96.75
113.25
159.00
223.65
312.00
475.00
375.00
618.75
750.00
2450.00
400.00
Sr No
305
Description
Unit
Rate `
Number
2120.00
306
307
308
309
310
311
312
313
314
Running Meter
Running Meter
Running Meter
Quintal
Litre
No.
Number
Number
Number
1267.00
1263.00
1263.00
586.00
195.00
75.00
270.00
16.80
1550.00
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Building-Bd-W : Miscellaneous
P.V.C. Sheet
Barbed Wire
Chunam / White lime Powder
Copper Tape width 25mm*3mm thick
Cripped wire 3' - 0" , 4' - 0" and 5' - 0" wide
Mosquito proof Nylone net
Nylone Rope
Tarat 36" width (Gunny cloth)
Tatti
Aluminium Strips 50 mm x 3 mm
Clorophyriphoas
D.D.V.P.
Malathion
Pine Oil
Concentina Coil Wire
Lightening Conductor
Chain link 3' - 0" , 4' - 0" and 5' - 0" wide
Salt
Rustonil - Rust Removal cum phosphatic Agout
Polysafe - plastone (Patent No. 57)
Green marble
Hold fast for steel gate
Bamboo 50mm dia.
Karva (for roof and sides 10kg bundle)
Bamboo Matting 1.2*1.8m
Weather sealant Non staining (600 ml)
Weather sealant Normal (300 ml)
M.S.Brackets / Aluminium Alloy Brackets
Anchor Fastner M-10
Square Meter
Kilogram
Kilogram
Kilogram
Square Meter
Square Meter
Kilogram
Running Meter
Square Meter
Running Meter
Litre
Litre
Litre
Litre
Running Meter
Number
Square Meter
Kilogram
Litre
Litre
Square Meter
No.
Number
Bundle
Square Meter
No.
No.
Kilogram
No.
914.00
118.00
30.50
358.00
164.00
157.00
268.00
55.00
16.00
358.00
220.00
222.00
160.00
68.00
305.00
8032.00
164.00
11.00
671.00
760.00
2000.00
138.00
164.00
20.00
46.00
460.00
145.00
100.00
110.00
274
Sr No
30
31
32
33
34
35
36
37
Description
Unit
No.
No.
Kilogram
Mtr.
Sq.Mtr.
Kilogram
Kilogram
Kilogram
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Screw bolt G. I.
Retro Refletive sheet type iv
Resin & Harder kit Each kit 1 Kg.
Expanded poly thene sheet
Guard Stone (Std. Size)
Coir String
Polyster tracing film 75 micro
Drawing papers
Printing papers 500 no. (A4 Size)
Boundary Stone (20x20x75 cms)
Plastic Jar
Water
Chhapara 100 mm
1
2
3
4
5
6
7
8
9
10
Number
Square Meter
Number
Square Meter
No
Kg.
Sqm
No.
Rim
No
No
Liter
No
275
Rate `
35.00
5.00
25.00
5.00
66.00
887.00
381.00
125.00
370.00
370.00
1462.00
1692.00
584.00
529.00
586.00
195.00
225.00
1188.00
80.00
55.00
74.00
74.00
800.00
0.60
16.80
5193.00
1500.00
267.00
382.00
61.00
102.00
27.00
194.00
260.00
79.00
2.00
27.00
Sr No
Description
Unit
30
31
32
Pad lock
Empty asphalt drums
T.W bullies 100 mm dia.
1
2
3
4
5
6
7
Rate `
No
No
Rmt
99.00
666.00
151.25
Number
Number
Cubic Centimeter
73.00
1741.00
1.15
Running Meter
Running Meter
Kilogram
Kilogram
224.00
428.00
126.00
510.00
Square Meter
Kilogram
Number
Running Meter
976.00
56.00
338.00
14.00
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
General-General
Cement Coloured
Empity Cement Bag
Tor Steel (H.Y.S.D.)
Tubular Steel
Sand - Natural
Sand - Crushed
Sand - Course
Sand (Screened)
Fly Ash Brick size 230*100*80 mm
Fly Ash Brick size 230*150*80 mm
Rubble stone Blasted
Aggregate 60 mm Blasted (Hand Broken)
Aggregate 80 mm Blasted (Hand Broken)
Aggregate 50 mm Blasted (Hand Broken)
Aggregate 40 mm (Hand Broken) Blasted.
Aggregate above 25 mm and upto 40mm Crushed
Kilogram
Number
Metric Tonne
Metric Tonne
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
1000 Nos.
1000 Nos.
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
95.00
2.00
47300.00
56000.00
1500.00
1000.00
1500.00
1710.00
6450.00
7350.00
328.00
496.00
496.00
496.00
584.00
654.00
17
18
19
Aggregate 25 mm
Aggregate 20 mm
Aggregate 12 mm
Cubic Meter
Cubic Meter
Cubic Meter
704.00
717.00
714.00
276
Sr No
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
Unit
Aggregate 10 mm
Aggregate 6 mm
Stone Dust
Soft Murum
Hard Murum
Unstaked lime
Water
White Cement
Plastizer
Stainless Steel Plate 202 grade
Stainless Steel Plate 304 grade
Kerosen
Admixture for concrete
Expanded Polythene Sheet
Bitumen pad 12 mm thick
General-MORTH: Roads
Granular Material or hard murrum for GSB works at
Site
Filter media/Filter Material as per Table 300-3
(MoRT&H Specification)
Close graded Granular sub-base Material 53 mm to
9.5 mm
Close graded Granular sub-base Material 37.5 mm
to 9.5 mm
Close graded Granular sub-base Material 26.5 mm
to 9.5 mm
Close graded Granular sub-base Material 9.5 mm
to 4.75 mm
Close graded Granular sub-base Material 9.5 mm
to 2.36 mm
Close graded Granular sub-base Material 4.75mm
to 2.36 mm
Close graded Granular sub-base Material 4.75mm
to 75 micron mm
Coarse graded Granular sub-base Material 2.36
mm & below
Coarse graded Granular sub-base Material 4.75mm
to 75 micron mm
Coarse graded Granular sub-base Material 4.75
mm to 2.36 mm
Coarse graded Granular sub-base Material 9.5 mm
to 4.75 mm
277
Rate `
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Metric Tonne
1000 Litre
Kilogram
Litre
Kilogram
Kilogram
Litre
Kilogram
Square Meter
Square Meter
721.00
727.00
413.00
92.00
118.00
30.50
134.00
29.12
115.00
210.00
357.00
45.00
100.00
267.00
870.00
Cubic Meter
186.00
Cubic Meter
415.00
Cubic Meter
674.00
Cubic Meter
681.00
Cubic Meter
673.00
Cubic Meter
659.00
Cubic Meter
635.00
Cubic Meter
643.00
Cubic Meter
639.00
Cubic Meter
631.00
Cubic Meter
639.00
Cubic Meter
643.00
Cubic Meter
659.00
Rate `
Sr No
Description
Unit
14
Cubic Meter
655.00
Cubic Meter
673.00
Cubic Meter
681.00
Cubic Meter
679.00
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
278
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Cubic Meter
Running Meter
Litre
Kilogram
Number
413.00
705.00
688.00
684.00
678.00
680.00
679.00
676.00
684.00
690.00
712.00
648.00
746.00
693.00
747.00
699.00
701.00
706.00
708.00
706.00
727.00
721.00
714.00
717.00
704.00
687.00
105.00
330.00
118.00
110439.00
Number
23114.00
Sr No
Description
Unit
Rate `
49
Number
110439.00
50
Number
44957.00
Number
49265.00
Number
45674.00
Metric Tonne
Metric Tonne
Square Meter
Each
50207.00
50207.00
1445.00
1188.00
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
Bitumen (emulsion)
Bitumen (modified graded) (bulk Cr-60)
Compressible Fibre Board(20mm thick)
Delineators from ISI certified firm as per the
standard drawing given in IRC - 79
Earth Cost or compensation for earth taken from
private land
Elastomeric slab seal expansion joint assembly
manufactured by using chloroprene, elastomer for
elastomeric slab unit conforming to clause 915.1 of
IRC: 83 (part II),
Electric Detonators @ 1 detonator for 1/2 gelatin
stick of 125 gms each
Epoxy compound with accessories for preparing
epoxy mortar
Epoxy mortar
Galvanised structural steel plate 6 mm thick
Epoxy resin-hardner mix for prime coat
Galvanised steel wire crates of mesh size 100 mm x
100 mm woven with 4mm dia. GI wire in rolls of
required size.
Galvanised structural steel plate 12 mm thick
Geomembrane
HTS strand
M.S. Clamps
Nuts and bolts
Pavement Marking Paint
Pipes 200 mm dia, 2.5 m long for drainage
279
Cubic Meter
Running Meter
98.00
19666.00
100 Nos.
14.00
Kilogram
550.00
Kilogram
Kilogram
Kilogram
Square Meter
345.00
52.00
421.00
180.00
Kilogram
Square Meter
Metric Tonne
Kilogram
Kilogram
Litre
Running Meter
52.00
561.00
75200.00
49.00
142.00
240.00
345.00
Rate `
Sr No
Description
Unit
72
Running Meter
633.00
73
Kilogram
300.00
74
75
76
77
78
79
80
81
82
83
1
2
Kilogram
Running Meter
Kilogram
Running Meter
Each
74.00
145.00
56.00
16129.00
25.00
Number
9350.00
Metric Tonne
Litre
Cubic Meter
Cubic Meter
30.50
175.00
611.00
657.00
Running Meter
Square Meter
95.00
14060.00
Number
110439.00
4
5
Bentonite
Epoxy Compound with accessories for preparing
epoxy mortar
Gelatine 80%
Kilogram
Kilogram
100.00
550.00
Kilogram
90.00
280
LABOUR RATES
Sr No
Description
Unit
Day
470.00
Day
452.00
Day
497.00
Day
470.00
Day
497.00
Day
470.00
Day
497.00
Day
470.00
Day
452.00
10
Day
497.00
11
Day
470.00
12
Day
497.00
13
Mechanic
Day
470.00
14
Day
470.00
15
Day
470.00
16
Day
452.00
17
Day
470.00
18
Day
497.00
19
Day
470.00
20
Skilled Labour
Day
470.00
21
Boreman Skilled
Day
470.00
22
Day
470.00
23
Day
452.00
24
Day
452.00
25
Day
452.00
26
Day
423.00
27
Day
452.00
28
Day
423.00
29
Day
470.00
30
Day
452.00
31
Day
497.00
32
Day
452.00
33
Helper Un Skilled
Day
423.00
34
Day
452.00
35
Navaghani
Day
452.00
281
Rate
Sr No
Description
Unit
36
Day
423.00
37
Day
423.00
38
Below Boy
Day
423.00
39
Day
497.00
40
Day
470.00
41
Day
423.00
42
Laboratory Assistant
Day
497.00
43
Day
423.00
44
Day
423.00
45
Day
452.00
46
Day
452.00
47
Day
452.00
48
Foreman Skilled
Day
470.00
49
Day
452.00
50
Day
497.00
51
Day
470.00
52
Khalashi / Diers
Day
470.00
53
Day
470.00
54
Electrician
Day
470.00
55
Welder Skilled
Day
470.00
56
Day
423.00
57
Watchman
Day
470.00
58
Day
452.00
59
Supervisor / Mate
Day
497.00
60
Day
470.00
61
Day
452.00
62
Day
452.00
63
Day
470.00
64
Operator (grouting)
Day
452.00
65
Day
423.00
66
Survey Engineer
Day
1234.00
67
Day
690.00
68
Computer Engineer
Day
1234.00
69
Day
570.00
282
Rate
RATE SCHEDULE
ANNEXURE "A"
RATE SCHEDULE FOR SUPPLY OF RCC PIPES ISI MARK ON THE RATE
CONTRACT FOR THE YEAR 2014-15.
RATES IN RS. PER NO.
PIPE DIA
NP-II CLASS
NP-III CLASS
NP-IV CLASS
487.60
510.92
551.20
602.08
629.64
677.34
997.46
510.92
535.30
576.64
630.70
659.32
710.20
1044.10
536.36
561.80
605.26
662.50
716.56
746.24
1096.04
1394.96
1626.04
1768.08
2045.80
2585.34
3199.08
4538.92
5412.36
6504.16
7501.62
9966.12
10844.86
12797.38
15100.76
17819.66
1845.46
2573.68
3217.10
4020.58
4811.34
6102.42
8117.48
10503.54
11706.64
13132.34
17371.28
17942.62
21172.44
24983.14
29479.66
2274.76
2235.54
3022.06
4083.12
5172.80
6818.98
9423.40
12218.62
14108.60
18053.92
19859.10
21200.00
24670.44
27138.12
29851.72
2 MTR. LENGTH
80
100
150
200
225
250
300
2.5MTR.LENGTH
300
350
400
450
500
600
700
800
900
1000
1100
1200
1400
1600
1800
a) Collars
At the half price of full round pipe of corresponding dia meter + 5% extra
for NP-2, NP-3, NP-4 Class Pipes.
c) Non-standard
Length Pipes
d) Non Standard
Length Pipes
283
2.5
ANNEXURE - B
OFFICE STATIONARY ITEMS FOR THE YEAR 2015-16
Sr.
No.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Particulars
3
Ream
Ream
Approved
rates for
D.S.R. 201516
4
500.00
500.00
Box
350.00
Box
180.00
1 Quire
Ream
Bottle/No.
Bundle
Box
Box
Mtr.
No.
No.
28.00
250.00
25.00
40.00
90.00
40.00
No.
25.00
No.
20.00
Dozen
No.
No.
No.
No.
No.
Box
No.
No.
Set
Set
Set
Box
No.
No.
190.00
35.00
70.00
20.00
35.00
90.00
250.00
125.00
40.00
90.00
65.00
50.00
40.00
15.00
75.00
Unit
2
Writing Paper (Full Size) Super Brand 7 kg
Writing Paper (Half Size) Super Brand 7 kg
Carbon Paper Sliver black & Blue 503 full sheet 100 kores brand
Carbon Paper Sliver black & Blue 503 Half sheet 100 kores brand
Rulled Register (Vertical & Horizontal) 1 to 12 quire
Rulled paper full sheet
correcting ink fluid/pen
Tag bundle (Red) 9" length (144 Nos. per bundle
Pin Box 250 gm each box
Candle
Dungri cloth in good quality
Tocha (Pokhar)
Cello tape 1" wonder
File Board (Thick) Printing of office Name with lace (asper sample)
File Board (Thin) Printing of office Name with lace (asper sample)
Rapper (Two flap) thick
Stamp Pad Size 110 x 70 mm
Stamp Pad Size 157 x 96 mm
Stamp Pad ink 60 ml.
Gum Bottle 150 ml.
Stappler Machine HD-45
Stappler pin 24/6
Stappler no. 10
Stappler no. 10 pin
Envelop 11" x 5" (1 set of 100 Nos. of envelop)
Envelop 9" x 4" (1 set of 100 Nos. of envelop)
Envelop 7" x 4" (1 set of 100 Nos. of envelop)
Natraj Pencile
Plastic folder (A4 size)
Box file
284
25.00
20.00
Sr.
No.
1
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
Particulars
3
No.
Bundle
No.
Box
Box
Dozen
Set
Bundle
Box
No.
No.
No.
No.
No.
Approved
rates for
D.S.R. 201516
4
25.00
200.00
15.00
100.00
50.00
300.00
150.00
70.00
20.00
350.00
250.00
25.00
30.00
25.00
quire
60.00
No.
Pkt.
Roll
220.00
180.00
70.00
No.
4200.00
No.
No.
No.
No.
10.00
40.00
1500.00
400.00
Unit
2
Colour flag
Brown Envelop 18" x 12" jumbo size (1 bundle 50 Nos.)
Plastic folder (legal size)
Highlight pen (1 Box 5No.)
Ball pen Lexi (10 Nos./Box)
Folding Tapal Pad
Envelop 15" x 11" ledger Cloth (1 set of 5 Nos. of envelope)
White lace
Earser natraj
Envelop 18" x 11" ledger Cloth (1 set of 50 Nos. of envelope)
Plastic Tapal tray
Paper waight
Pin Container
White Board marker pen
Rulled Register Rounded leather (Ledger Lond Book) Make
"Asman"
Computer paper legal size (Jk Brand)
Computer paper A4 size (Jk Brand)
Fax Roll 30 mtr.
Laser printer catrtridge toner No. ML-1010/1020/ML 1520/ML1710D/PMO 12 - H
Computer Disc (C.D.)
Re-writable C.D.
AntiVirus
Cartridge Tonner Refil
285
ANNEXURE - C
Rates For Laundry Item
Sr.
No.
Particulars
Unit
1
1
2
Curtain - 5 x7 (Washing & Press)
3
No.
4
80.00
No.
100.00
No.
40.00
No.
70.00
Towel (Washing)
No.
30.00
Napkeen (Washing)
No.
15.00
Carpet - 10 x 10 (Washing)
No.
200.00
Chadder (Washing)
No.
50.00
286
PILE FOUNDATION
Sr.
No.
1
Sr.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Unit
Rubble in M3
M3
1.00
M3
0.20
1.00
0.15
Item
Unit
Cement
Sand in M3
M3
8.00 bags
0.425
M3
in M3
M3
2.60
0.47
0.7
0.24
M3
3.40
0.47
0.7
0.24
M3
4.40
0.47
0.7
0.24
M3
6.40
0.445
0.7
0.22
0.11
M3
4.40
0.47
0.7
0.24
M3
M3
M3
6.00
7.00
6.00
0.44
0.425
0.425
0.56
0.56
-
0.22
0.22
0.67
0.11
0.11
0.22
M3
7.00
0.425
0.57
0.28
M3
M3
7.50
8.00
0.425
0.425
0.57
0.57
0.28
0.28
M3
8.25
0.425
0.57
0.28
M2
0.06
M2
0.22
0.06
M3
8.50
287
Sr.
No.
Item
BRICK MASONARY
Unit
Cement in Screened
bags
sand in M3
M3
1.24
0.25
475
M3
1.58
0.32
475
M3
1.42
0.254
475
M3
1.24
0.25
475
M3
1.58
0.32
475
M3
1.12
0.32
475
M3
1.58
0.32
475
M2
0.255
0.034
57
1.76
M2
0.21
0.021
38
1.32
M3
2.60
0.25
475
M3
2.60
0.25
616
M3
2.60
0.25
475
M3
2.60
0.25
616
M3
1.24
0.25
475
M3
480
Fire clay in
Mortar in
M3 0.10
288
Sr.
No.
1
2
Stone masonary
Unit
Cement in Screened
Trap
bags
sand in M3 Rubble
in M3
3
1.70
0.35
1.16
UCR masonary in CM 1:6 in foundations
M
and plinth of inner walls/external walls
Item
Corner/
Quins in
Nos
Remark
M3
2.05
0.35
1.16
1.70
0.35
1.16
M3
1.70
0.35
1.16
M3
1.70
0.35
1.16
M3
1.70
0.35
1.16
M3
0.70
0.35
1.16
M2
1.70
0.35
1.16
M2
1.70
0.35
1.16
Unit
Cement
in bags
Screened
sand in M3
M3
1.70
0.35
M3
1.70
0.35
0.35
50
M3
1.50
0.30
0.35
50
M3
1.50
0.30
0.35
50
M3
1.70
0.35
0.35
50
M3
1.70
0.35
0.35
50
Sr.
No.
Sr.
No.
Item
Unit
Item
Corner/
Trap
Khandki
Trap
Rubble in Quins in Header in in Nos
Nos
Nos
M3
0.35
2
7
50
M3
1.02
0.21
45
17 Laterite masonary
Supersturcture
M3
1.02
0.21
45
in
CM
1:6
in
289
Sr.
No.
1
2
3
4
5
6
Item
M2
0.32
0.022
M2
0.18
0.020
Course Aggreagate
20mm in M3
12/10mm in M3
0.033
0.04
-
M2
0.55
0.07
Brick
Bat
0.080
M3
4.00
0.23
1.00
M2
0.22
0.024
M2
0.27
0.028
Item
Unit
1
2
3
4
5
6
M2
M2
M2
M2
M2
M2
0.054
0.07
0.090
0.11
0.14
0.228
0.0076
0.0076
0.015
0.015
0.015
0.024
M2
0.14
0.025
M2
0.17
0.025
0.217
0.031
0.25
0.033
0.25
0.021
0.012
0.250
0.021
0.012
M2
0.300
0.015
0.015
M2
0.030
0.003
M2
0.025
0.003
M2
0.050
0.005
0.040
0.004
M2
0.030
0.003
0.025
0.003
M
M
290
Remark
Sr.
No.
Unit
Cement in bags
Screened Sand in
M3
M2
0.135
0.022
M2
0.14
0.022
M2
0.15
0.022
M2
0.135
0.022
M2
0.135
0.022
M2
0.135
0.022
M2
0.185
0.022
Sr.
No.
Item
M2
0.334
0.020
M2
0.406
0.025
0.028
0.010
M2
0.300
0.018
0.027
0.080
M2
0.365
0.022
0.033
0.011
Unit
Cement in bags
Screened Sand in
M3
M2
0.135
0.02
M2
0.185
0.02
M2
0.135
0.02
M2
0.185
0.02
M2
0.20
0.02
M2
0.20
0.02
Sr.
No.
Unit
Item
291
Metal
20mm in 12/10mm
M3
in M3
0.023
0.007
Sr.
No.
Unit
Cement in bags
Screened Sand in
M3
M2
0.20
0.02
M2
0.20
0.02
M2
0.135
0.02
M2
0.185
0.02
M2
0.135
0.022
M2
0.185
0.02
Sr.
No.
Item
Item
Unit
Cement in Screened
bags
sand in M3
M2
0.20
0.0136
Unit
Cement in bags
Screened Sand in
M3
M2
0.20
0.02
M2
0.30
0.024
M2
0.185
0.02
M2
0.185
0.02
M2
0.185
0.02
M2
0.185
0.02
M2
0.185
0.02
0.185
0.02
M2
0.185
0.02
M2
0.185
0.02
M2
0.185
0.02
Sr.
No.
Item
292
M2
0.16
0.02
M2
0.16
0.02
M2
0.05
0.005
0.22
0.02
M2
0.21
0.02
M2
0.04
0.02
M2
0.20
0.017
Bd - W. Miscellaneous
Sr.
No.
Item
Unit
Cement in Screened
bags
sand in
M3
Crushed metal
12/10mm in M3
M2
M2
M2
M2
0.23
0.29
0.46
0.576
0.028
0.035
0.056
0.070
M2
M2
M2
M2
0.237
0.296
0.472
0.600
0.028
0.036
0.057
0.072
M2
M2
M2
M2
0.256
0.444
0.550
0.034
0.054
0.067
M2
M2
M2
M2
0.206
0.257
0.411
0.514
0.025
0.031
0.050
0.062
1:3
293
0.132
0.018
0.036
0.132
0.018
0.036
0.310
0.042
0.085
Item
Unit
No.
0.52
0.103
134
0.025
No.
0.35
0.024
0.048
No.
0.20
0.02
No.
0.25
0.018
No.
0.25
0.035
6
7
No.
No.
0.25
0.10
0.035
0.01
No.
0.10
0.01
No.
0.15
0.02
0.02
0.10
0.02
31
No.
0.10
0.01
No.
0.10
0.01
No.
0.10
0.01
No.
0.55
0.08
52
0.05
No.
2.33
0.35
350
0.194
No.
3.53
0.54
527
0.3
No.
3.90
0.57
450
0.45
No.
6.70
294
Unit
Cement in bags
0.003
0.005
0.007
0.007
0.035
0.045
0.080
Sr.
No.
Item
295
3
4
5
6
7
8
Item
Unit
Asphalt in Kg
Coarse Aggregate
40mm in 25mm 20mm 12mm 10mm 6mm
m3
in m3 in m3 in m3 in m3 in m3
6.00
1.50
1.20
6.00
1.50
1.20
2.45
2.73
0.60
1.85
1.20
0.60
1.83
0.90
0.15
1.50
125
Single coat surface dressing on 100 M2
BT surface
Two coat surface dressing
225.00
100 M2 Dose
Seal coat 125.00
Total
350.00
2
Bituminious liquid seal coat
98
100 M
1.05
1.80
1.00
0.90
1.80
0.90
10 50mm
thick
special
grout 100 M2 Tack coat 73.50
Dose
40.00
bituminious surface including
Seal coat 97.50
tack coat and seal coat
Total
611.00
11 Tack coat on WBM surface
100
100 M2
12 Tack coat on BT surface
13 Emulsion tack coat on WBM
surface
14 Emulsion tack coat on BT
surface
15 25mm thick hot mix hot laid
carpet
16 20mm thick hot mix laid
carpet(open
graded
premix
carpet)
100 M
100 M2
50
35
100 M2
25
100 M2
209
1.85
1.20
0.60
100 M2
146
1.83
0.90
0.15
HB Metal
40mm in
M3
250
9.00
1.5
1.80
100 M2
M3
M
200
9.00
1.5
1.80
b) On WBM surface
18 Granular sub-base
19 Shoulder drain
296
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Item
Unit
Cement Screened
Course Aggreagate
in bags sand in
40mm in 20mm in 12/10m
M3
M3
M3
m in M3
M3
2.60
0.47
0.94
M
3
M
3
M
3
M
3
M
3
M
3
M
3
M
3
M
3
M
3.40
4.40
6.40
4.40
6.00
7.00
7.50
8.00
8.25
4.40
0.47
0.47
0.445
0.47
0.445
0.445
0.445
0.425
0.47
0.47
0.94
0.70
0.70
0.70
0.24
0.67
0.24
0.67
0.67
0.67
0.57
0.57
0.57
0.22
0.22
0.22
0.22
0.28
0.28
-
6.00
0.47
0.70
0.24
7.00
0.47
0.70
0.24
3.90
0.40
0.55
0.24
0.15
5.80
0.40
0.55
0.24
0.15
M
M
Sr.
No.
Item
Unit
16
M3
17
18
19
M3
Cement Screened
Trap
Corner/ Trap Khandki
in bags sand in Rubble Quins in Header in Nos
M3
in M3
Nos
in Nos
2.90
0.28
12
0.17
110
1.00
1.00
Gravel in
M3 0.33
1.21
0.15
297
40mm
Khandki
crushed in Nos 5
metal in
m3 0.141
RCC PIPES
Sr.
No.
Item
Unit
Cement
in bags
Sand in
M3
20
ii) 100mm
24
iii) 150mm
33
iv) 250mm
52
v) 300mm
75
vi) 350mm
92
240
vii) 400mm
104
269
viii) 450mm
0.12
0.009
128
297
ix) 500mm
141
325
x) 600mm
0.16
0.011
193
410
xi) 700mm
223
470
xii) 800mm
0.188
0.012
287
604
xiii) 900mm
0.22
0.0154
358
754
xiv) 1000mm
0.25
0.017
438
829
xv) 1100mm
525
1054
xvi) 1200mm
0.26
0.018
620
1140
298
Weight of pipe in
kg./m.
NP-2
NP-3
pipes
pipes
6 to 9 kg/10 m
12 to 15 kg/10 m2
12 to 15 kg/10 m2
2.80 to 11.20mm
Below 2.80mm
299
88 Kg/M3
0.835 M3
3
0.209 M
0.366 M3
Total 1.380 M3
77 Kg/M
0.835 M3
0.209 M3
0.366 M3
Total 1.380 M3
11.20 to
26.40mm
2.80 to 11.20mm
Below 2.80mm
66 Kg/M3
0.835 M3
3
0.209 M
0.366 M3
Total 1.380 M3
Key
Aggregate
3
2
0.18 M /10 m
2
0.18 M3 /10 m
30 Kg/10 sqm
1 cum per 10 sqm
Total 1.13 M
6) Dense Bituminious Macadam (Density 2.30) 40mm compacted thickness
with bitumen at 5% of total mix (Excluding primer coat/tack coat) Clause no. 507
i. Bitumen
120.00 Kg
ii. 20mm
0.61 M3
iii. 10mm
0.459 M3
1.528 M3
3
iv. 5.60mm and below
0.459 M
v. Cement filler
0.046 M3
300
Stone chipping
27.50 kg/10m
20.00 kg/10m2
ii)
i)
22.50 kg/10 m
0.10 M /10M
10 mm size
0.18 m3 /10m2
12 mm size
0.10 m3 / 10m2
Open graded premix carpet 20mm thick (Table 500.16 Page 178) Clause no. 509
3
2
13.20mm Nominal size
0.18 M /10M
3
11.20mm Nominal size
0.09 M /10M2
Bitumen binder
14.6 Kg/10M2
9) Mix seal surfacing (Excluding tack coat) Data book clauseno. 510
Bitumen
Type - A
Type - B
13.20mm
22.00
Kg/10M2
19.00
Kg/10M2
11.20mm
0.10
M /10M3
3
0.04
M /10M3
3
5.60mm
0.12
M3/10M2
0.14
M3/10M2
5.60mm
Crushed
& below
Sand
0.05
M3/10M2
0.09
M /10M2
3
301
12.50 kg/10 m2
8)
i)
ii)
iii)
10 mm size
0.105 m3 / 10 m2
12 mm size
0.15 m3/102
10) Bituminous Concrete (Excluding primer /tack coat with cement filler)
Density 2.40 Data Book bitumen content at 6.50 %
i)
ii)
iii)
iv)
Coarse aggregate
Fine aggregate
Cement
Bitumen at
(64%)
(36%)
3%
6.50%
6.70mm
1.006M
3
0.566M
0.072MT/M3
156 Kg/M3
Total
1.572M
3
2
0.09 M /10M
9.80 Kg/10M2
12) P & L semidense bituminous concrete with 5.50% Bitumen Clause No. 511
(Excluding primer/tack coat)
.1.
i)
ii)
iii)
Crushed stone
13.20mm
11.20mm
5.60mm and below
.2. Bitumen
3
3
0.40 M /M
0.64 M3/M3
3
3
0.44 M /M
Total
1.48 M3
124 Kg/M3
13) Providing and applying premixed seal coat type ''B'' Clause no. 513
i)
0.060 M3/10M2
6.80 Kg/10M2
302
0.40
0.42
0.475
0.50
0.365
0.365
0.40
0.40
0.382
0.382
-
0.304
0.299
0.57
0.57
0.294
0.304
0.28
0.28
0.33
0.45
0.52
0.22
0.11
i) PCC M-20
ii) RCC M-20
RCC M-25
M
3
M
3
M
0.38
0.40
0.41
0.45
0.425
0.45
0.57
-
0.22
0.57
0.63
0.11
0.28
0.27
M3
3
M
0.475
0.50
0.40
0.40
0.57
0.57
0.28
0.28
M3
3
M
3
M
3
M
3
M
0.40
0.42
0.475
0.50
0.44
(includin
g 10%
extra)
0.40
0.365
0.365
0.40
0.40
0.365
0.382
0.382
0.382
0.304
0.304
0.57
0.57
0.304
0.294
0.299
0.28
0.28
0.299
0.365
0.382
0.304
0.294
0.46
0.365
0.382
0.304
0.299
0.40
0.41
0.425
0.45
0.57
0.63
0.28
0.27
c)
d)
.
e)
2.5 (ii) a)
M
3
M
3
M
3
M
PCC M-15
b)
M3
M
Well curb
i) RCC M-20
ii) RCC M-25
M
3
M
303
b)
b)
c)
c)
b)
Well Steining
i) PCC M-15
ii) a)
PCC M-20
iii) b)
RCC M-20
iii) RCC M-25
M3
3
M
3
M
3
M
0.33
0.38
0.40
0.41
0.45
0.45
0.425
0.45
0.52
0.57
-
0.22
0.22
0.57
0.63
0.11
0.11
0.28
0.27
c)
Bottom Plug
PCC M-20 gfrade
M3
0.418
(includin
g 10%
extra)
0.45
0.57
0.22
0.11
M3
0.33
0.45
0.52
0.22
0.11
Well cap
i) RCC M-20 grade
ii) RCC M-25 grade
iii) RCC M-30 grade
M3
3
M
3
M
0.38
0.40
0.42
0.45
0.365
0.365
0.57
0.382
0.382
0.22
0.304
0.304
0.11
0.299
0.299
M
3
M
3
M
3
M
0.40
0.42
0.46
0.50
0.365
0.365
0.365
0.40
0.382
0.382
0.382
-
0.304
0.299
0.304
0.57
0.299
0.304
0.299
0.28
M3
3
M
3
M
3
M
3
M
0.33
0.38
0.40
0.41
0.45
0.45
0.45
0.425
0.45
0.43
0.52
0.57
-
0.22
0.22
0.57
0.63
0.58
0.11
0.11
0.28
0.27
0.28
RCC Superstructure
a) RCC M-35 grade
b) RCC M-40 grade
M3
3
M
0.475
0.50
0.40
0.40
0.57
0.57
0.28
0.28
0.41
0.45
0.45
0.43
0.63
0.58
0.27
0.28
d)
e)
3.3
b)
4.1
i)
ii)
a)
b)
M
3
M
304
4.2
4.5
4.8
Prestressed concrete
a) M-35 grade
b) M-40 grade
c) M-45 grade
d) M-50 grade
M3
3
M
3
M
3
M
0.475
0.50
0.52
0.54
0.40
0.40
0.40
0.40
0.57
0.57
0.57
0.57
0.28
0.28
0.28
0.28
M3
0.45
0.43
0.58
0.28
0.021
0.02
0.027
0.013
M3
0.41
0.45
0.63
0.27
0.33
0.45
0.52
0.22
0.11
M3
0.33
0.45
0.52
0.22
0.11
M3
3
M
3
M
3
M
0.17
0.22
0.33
0.40
0.47
0.47
0.45
0.425
0.89
0.89
-
0.85
0.95
305
ABBREVIATIONS
1
Square Kilometre
Sq.Km.
Kilogram
Kg.
Metric tonne
M.T.
Number
No.
Runing metre
R.M.
Cubic centimeter
Milimetre
mm.
Centimeter
Cm.
Metre
10
Kilometre
11
Square Metre
Sq.M.
12
Cubic Metre
Cu.M.
13
14
Indian Standard
15
IRC
16
T&P
17
Galvanised Iron
GI
18
Cast Iron
CI
19
RCC
20
PCC
21
Pre-Stressed Concrete
PSC
22
RMC
23
Ground Level
GL
24
Rupees
Rs.
25
Diametre
Dia
26
Minimum
Min
27
Maximum
Max
28
Hour
Hr
29
That is
i.e.
30
For Example
e.g.
31
32
Bituminous Macadam
33
Lead in Kilometre
34
35
Cu.Cm.
M.
Km.
MORT&H
IS
W.B.M.
BM
L
O.M.C.
H.M.H.L.
306
36
Building Works
Bd.
37
Bridge Works
Br.
38
Cross Drainage
Cd
39
Road Works
Rd.
40
Taluka
Tal.
41
District
Dist.
42
43
Centre to Centre
44
Mild Steel
45
H.Y.S.D.
46
UPVC
47
P.V.C.
48
Asbestos Cement
A.C.
49
Cement Mortar
C.M.
50
Expanded Mesh
XPM
51
BWP
52
Boring
B'NG
53
Survey-D
54
Survey-P
C.C.T.W.
c/c
M.S.
307
GOVERNMENT OF MAHARASTARA
Vigilance & Quality Control Circle
Schedule of Testing charges for construction material used for Government
Name of Test
Test
Rate Sanctioned
Rs.
1Test
3000.00
WaterAbsorption,SpecificGravity.ImpactValue
CrushingValue.
1Test
2100.00
Sieve Analysis.
1Test
550.00
Abrasion Value.
1Test
950.00
1Test
700.00
Stripping Value.
1Test
600.00
Soundness.
1Test
2000.00
Bulk Density.
1Test
300.00
MIX DESIGN
GSB Mix Design.
1Test
13000.00
10
1Test
13000.00
11
FINE AGGREGATES
Fineness Modulus ( Sieve Analysis ), Silt & Clay Content
1Test
1100.00
12
1Test
650.00
13
Silt Factor.
1Test
700.00
14
BRICKS
Water Absorption (Set of 5 Bricks), Compressive
Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).
1Test
1750.00
15
1Test
2000.00
1Test
1100.00
16
308
GLAZED TILES
17
18
1Test
1300.00
1Test
600.00
1Test
1300.00
1Test
1200.00
1Test
800.00
19
24
25
CONCRETE
Compressive Strength OF C.C. Cube(Set of 3 cubes).
1Test
550.00
26
1Test
11000.00
27
1Test
600.00
28
Permiability Test.
1Test
1250.00
29
13000.00
30
1mix
Design
1Test
perkm.
15.00
1Test
2000.00
1Test
550.00
1Test
1600.00
23
31
2300.00
32
33
34
35
Sieve Analysis.
1 Test
550.00
36
1 Test
350.00
37
1 Test
900.00
38
1 Test
1500.00
39
1 Test
5500.00
40
1 Test
2100.00
41
per km.
15.00
42
per km.
54.00
309
43
1 Test
900.00
44
1 Test
650.00
45
Mechanical Analysis.
1 Test
1800.00
46
1 Test
25000.00
47
1 Test
750.00
BITUMEN
1 Test
2500.00
49
1 Test
1550.00
50
1 Test
750.00
51
52
Extraction Test.
Sieve Analysis of Bituminous mix(2 samples of extraction
for one sieve analysis excluding extraction)
Marshall Stability & Flow measurement. (Set of 3 moulds)
1 Test
1 Test
1300.00
3150.00
1 Test
800.00
1 mix
design
1 Test
13000.00
550.00
2500.00
48
53
57
58
1 mix
design
1 Test
59
1 Test
1 Test
750.00
900.00
62
1 Test
500.00
63
1 Test
2250.00
64
per km.
15.00
65
BITUMINOUS EMULSION
% Residue Test
1 Test
500.00
66
1 Test
300.00
55
56
6000.00
1 Test
1600.00
69
1 Test
900.00
70
WOOD
Density, Moisture Content.
1 Test
850.00
1 Test
2200.00
68
FLUSH DOOR
71
310
72
73
PLYWOOD
Determination of Resistance to dry heat, Determination of
Moisture Content, Determination of Density, Thickness of
Plywood,
Test for Glue Adhesion
1 Test
2700.00
1 Test
450.00
PARTICAL BOARD
74
1 Test
1300.00
75
1 Test
1 Test
550.00
650.00
1 Test
750.00
POLYMER MATERIAL
76
77
Water Absorption
1 Test
550.00
78
Bursting Strength
1 Test
400.00
A.C. SHEETS
79
Water Absorption,
1 Test
550.00
80
Load Bearing
1 Test
300.00
1 Test
200.00
1 Test
250.00
1 Test
200.00
1 Test
900.00
G.I. PIPES
81
82
1 Test
2500.00
86
1 Test
450.00
87
1 Test
1900.00
88
1 Test
250.00
89
1 Test
1200.00
90
1 Test
1000.00
1 Test
1300.00
1 Test
3100.00
83
84
85
91
92
311
1 Test
1 Test
3100.00
900.00
95
Flowability.(Percentage residue).
1 Test
800.00
96
1 Test
800.00
97
Drying Time.
1 Test
650.00
93
94
98
Drying Time.
1 Test
650.00
99
1 Test
600.00
100 Flexibility.
1 Test
250.00
1 Test
400.00
1 Test
400.00
1 Test
850.00
1 Test
3200.00
per km.
600.00
106
per km.
1200.00
107
per km.
600.00
per km.
15.00
per km
11300.00
1 point
150.00
1 point
250.00
Important Note : The above rates are applicable for all Division & Subdivision under P.W.D. &
Z.P. in Maharashtra and for other Govertment / Private Organization the rates shall be twice as
mentioned in DSR.
Suprintending Engineer
Vigilance & Quality Control Circle,
Pune
312
Control Tests & their frequency & specified limits for various construction materials
Sr.
No.
CEMENT (OPC)
1) Initial setting time.
2) Final setting time.
3) Fineness by dry
sieving.
4) Specific gravity.
Specified Limit
Frequency
a) 160
230
270
b) 220
330
370
c) 330
430
530
Expansion not more than 10
mm.
SAND
1) Particle size.
2) Silt content.
3) Fineness modulus.
4) Bulkage.
313
5) Moisture content.
COARSE AGGREGATE
1) Gradation.
Size of metal.
80 mm.
60mm
50mm
40mm
40mm to50mm.
100 %
Passing
through
sieve size
100% Retained on
sieve size
100mm
50 mm
80mm
50 mm
60mm
40 mm
63mm
63 mm (0%)
40mm 35 40mm (30 to 65%)
to 70%
12.5mm 0 12.5mm (95 to 100%)
to 5 %
63 mm
25 mm
50mm
40 mm
25 mm
20 mm
12.5 mm
10 mm
25 mm
20 mm
12.5mm
10 mm
6.3 mm
4.75 mm
For
For Road work
concrete
(Heavy traffic)
2) Impact Value.
Shall not Shall not exceed 30%
exceed
45%
3) Crushing value
shall not shall not exceed 17 %
exceed
45%
4) Los Angles abrasion value shall not shall not exceed 50%
exceed
(for WBM) shall not
16%.
exceed.
17%(B.T.works)
5) Flakiness Index
6) Water absorption
314
7) Specific Gravity
BRICKS
1 )Water absorption shall not
exceed
2)Compressive Strength (wet
condition )
3)Efflorescence
Not
specified
I class
20%
Not specified
II class
22%
A set of 15 bricks for 50000
consignment or part there of.
32.8
29.52 kg/cm2
kg/cm2 minimum
minimum
NIL - when there is no
perceptible deposit of
efflorescence
Slight when not more than
10% area is covered with
deposit
Serious when there is heavy
deposit of salt accompanied by
powdering or flaking of surface
CEMENT CONCRETE
CUBE
Grade
1) Compressive Strength
M100
M150
M200
M250
M300
M350
7days
(Min
kg/cm2)
70
105
135
170
200
235
28 days
(Min
kg/cm2)
100
150
200
250
300
350
M400
270
400
Class AA Class A
MANGALORE TILES
1) Water absorption shall not
19%
24%
exceed
2) Breaking Load kg
For
For Average
(minimum)
Average
100 (410 x
235)
80(410x235)
315
110
(420x250)
110
(425x260)
Individual
90
(410x235)
90(420x250)
90(425x260)
Individual
68(410x235)
78(420 X250)
100 (420
X250)
100 (425 X
260)
3) Permeability Test
2.Transverse strength
78(425 X260)
SOIL / MURUM
1. Proctor Density Shall not
be less than
1.52 gm/cc for Embankment upto One test per 1000 m3 or soil.
3 mtr. Height
1.6 gm/cc for subgrade and
earthen shoulders/verges/backfill.
2. C.B.R. Value
10 HARD MURUM
1)Gradation
2) Plasticity Index
11 SOFT MURUM
1) Plasticity Index
Below 8
12 STONE
Water Absorption
Maximum 5%
316
Compressive Strength
Specific Gravity
13 GLAZED TILES
1) Water Absorption
1530 kg/cm2
Not less than 3
Not more than 18%
To ascertaion the
correct grade of
bitumen
14 BITUMEN
1) Penetration
15 BITUMINOUS MIX
1) Extraction
Flow 2-4 mm
317
ADDITIONAL TESTS CONDUCTED AT REGIONAL LABORATORY AT TURBHE NEW MUMBAI AND DISTRICT
LABORATORIES AT MANGAON AND RATNAGIRI
CONTROL TESTS AND THEIR FEQUENCY AND SPECIFIED LIMITS FOR VARIOUS CONSTRUCTION MATERIALS
Sr.
No.
COARSE AGGREGATE
Soundness
Bulk Density
Specified Limit
Frequency
Loss with
Sodium 12% Max.
Magnesium Sulphate 18% Max.
-
FINE AGGREGATE
3
4
Bulkage of sand
CONCRETE
Modules of rupture
Of By beam test min.
Concrete
3 days
7 days N/mm2
N/mm2
1.2
1.7
2 beams/150 m3 or part there of
(one for 7 days and other for 28
1.5
2.1
days) or minimum 6 beams per
1.7
2.4
days work whichever is more
1.9
2.7
2.1
3.0
2.3
3.2
2.5
3.4
Sulphate & Chloride content Sulphate content 500 mg/Lt
Chloride content
2000 mg/Lt. for P.C.C.
1000 mg/Lt. for R.C.C.
Mechanical analysis
BITUMEN
Softening point
GRADE
30/40
50-65
60/70
40-55
80/100
35-50
10 Viscosity
11 Flash & fire point (Minimum )
min 175
min 175
min 175
min.0.99
min.0.99
min.0.99
min.50
cm.
min 75
cm.
min. 75 cm.
13 Ductility ( Minimum )
318
60 to 80 at 25 C without coarse
aggregate
10 to 20 at 250C after adding coarse
aggregate
WATER
15 PH value
STEEL ANTICORROSIVE
TEST
19 Resistance to applied
voltage (1 Hr.test)
20 Resistance to applied
voltage (30 days.test)
21 Thickness of coating
319
320