Professional Documents
Culture Documents
Ver:1.0
1.InstallationEnvironment
The device can be installed in indoor and
outdoor places the illuminance of external
light source is 08000LUX. Direct sunlight
shallbeavoidedifthedeviceisinstalledin
outdoorplaces.Installthedeviceindoorsat
least10feet(3m)awayfromwindows,and
6.5feet(2m)awayfromlightfixtures.
Recommendedlocation:
1200+Lux
10Lux
0800Lux
Step#2:
Alignthewallmountedbasetotheholesonthewall,andusethreescrewstofixitonto
thewall(figure)aligntheironboardtotheholesonthewallmountedbase,anduse
fourscrewstofixitontothewallmountedbase(figure)connectthedevicewiththe
iron board (fromthe top down),to ensure itistightlyjointed withtheboard(figure)
finallyuseonescrewtofixthedeviceandtheironboard(figure).
3.Recommendedstandingdistancefromdevice
Forusers56feettall(1.55m1.85m)werecommendusers
standabout2feet(0.5m) fromthewall.
When viewing your image on the device display window,
stepawayifyourimageappearstoobright.Stepcloserif
yourimageappearstoodark.
NOTRecommendedlocations:
Directsunlight
Outdoors
Directsunlight
thruwindow
Indirectsunlight
thruwindow
Toocloseto
lightfixtures
2.InstallationSteps
1.1M
Step#1:
Affix the paper template to the wall and drill three (3) holes
withinthethree(3)markedcirclesonthepapertemplate.
We recommend affixing the template about 3.6 feet (1.1m)
abovetheground,assumingtheaverageheightofyourusers
is56feettall(1.55m1.85m).Theinstallationheightfour(4)
feet (1.2m) is applicable for the body height over 5.4 feet
(1.65m).
RecommendedPosture(pose)vs.poorPosture(pose)
5.EnrollmentandVerification
Recommended:
When enrolling users and then subsequently
verifying those users, its important those users
consistentlystand(orsit)atthesamedistanceand
anglefromthedevice.
7.EnrollmentandVerificationmethod
Thedevicehasthree(3)methodsofenrollment: Face/Password/IDcard.
ThedevicehasmanywaysofIdentificationandVerification:1:NFaceIdentification/ID
card Identification/Password Identification/1:1 ID Card plus Face Verification/1:1
PINplusFace.
Use1:N(face)forFAST1stepmatching.Withoneglance,thedevicewillqueryitsentire
databasetoseeifyourfaceexists.
Use1:1(face)2stepmatchingwhenyouneedgreateraccuracyandreliability.
Step#1:EnteryourUserID#.
Step#2:Displayyourface.devicewillattemptmatchingyourstored facewith live
face.
Duringtheverification, positionyourheadsuchthatyourfaceappearsinthecenterofthe
devicedisplaywindow.Focusyourface insidethegreenbox.
Severalwrongways:
Toohigh
Toolow
8.AdjustingExposure(contrast)ofcapturedFaceimages
Tooclose
Toofar
Thedevicewillautomaticallyadjusttheimagecontrastaccordingtotheenvironment.If
thecapturedfaceimageispoor,youcanadjusttheExposuresetting.
Press MENU on the device window display > SYSTEM > FACE > EXPOSURE.
Defaultsettingis300.
WhenthecapturedimageistooBRIGHT,thenLOWERtheexposuresetting.Whenthe
capturedimageistooDARK,thenINCREASEtheexposuresetting.
Toobright
Toodark
Good
6.EnrollmentFacialExpression
Duringtheenrollment,positionyourheadsuchthatyourfaceappearsinthecenterofthe
device display window. Follow the voice prompts by Focuseyesinsidethegreenbox.
The user needs to move the face up or down during face registration. The pose for
registrationisshowninthefigureattheleftside(Thisisasimulatedfaceshowninthe
figure):
9.ScreenCalibration
If the screen display is not reacting to the users touch properly, the screen can be
calibratedbythemenu.
PressMENUonthescreen>Calibration. Acrosshairtargetwillappearonthescreen.
Pressyourfingeronthecenterofthecrosshair.Afterpressingfive(5)successivetimes
onthecrosshair,thedevicewillreturntothemainmenuautomatically.Thenpressthe
[Back]keytoreturntotheoriginalwindow.