Professional Documents
Culture Documents
MEW regulations and specifications shall be followed while designing any Electrical
Installations in Kuwait
The design methodology
Definition of voltage ranges
Electrical regulations and standards
Quality and safety of an electrical installation
Environmental directives
Installed power loads - Characteristics
Induction motors
Resistive-type heating appliances and incandescent lamps (conventional or halogen)
Fluorescent lamps
Discharge lamps
II.
Choose the location of the point of Power intake from the primary system.
Standards of Design :Describe pertinent standards of design, such as voltage drop, and
equipment ratings.
Discourse the characteristics of this primary system, including:
a) Voltage designation and levels: Provide basis for selection of primary and secondary
voltages.
b) Number of phases. 3 phase or Single
c) Available fault current,
d) The circuit grounding classifications (ungrounded, uni-grounded, resistance grounded, or
multi-grounded).
e) Address the adequacy of the primary system; if inadequate, state measures proposed to
correct the inadequacy.
f) System Maintainability: Design the system in a manner that facilitates periodic
maintenance of the equipment.
III.
Distribution methods
Choose method of power distribution to be one of the following:
1.
Underground Distribution
2.
Overhead Distribution
3.
Bus ducts
Conductors
Include conductor size, type, number of conductors, insulation voltage rating, and insulation
level.