Professional Documents
Culture Documents
Empanelment of Service Providers for Last mile Optical Fiber Connectivity(4F & 24F)
for Government offices from the PoPs of AP Fibre Grid (on rate contract)
Tender No: APSFL/ Last Mile SP-1/102/2016 Dt: 12/08/2016
Pre-Bid Meeting Held on 19/08/2016 at 3:00 P.M
Corrigendum-2 dated 24/08/2016
Bidders may please note that this Corrigendum document is part of the tender.
Bidders are requested to sign and seal the copy of the Corrigendum by the
Authorised signatory of the Tender and submit it along with the RFP.
S.No
Section
in the
Tender
Page
No.
Clause in RFP
Revised Clause
tender may be
Sealed
submitted not later than 0309-2016 @ 3:00 PM at the
address mentioned in (1).
27
Annexure-I
New
Clause
Annexure
IV
Checklist
13
List of Accessories
Annexure-II
8. Technical Compliance Letter from OEM along with
leaflets, data sheets, ISO 9001
certificate, TL9000 certificate
and
if
any
for
the
fibre/accessories/fittings etc.
New
Clause
AnnexureVIII-Price
Bid form
19-20
New
Clause
Annexure-I
Cable Specifications 4F G65D 2 Unitube ADSS Drop Cable
CABLE CONSTRUCTION DIAGRAM (Wind Speed : 65 Kmph, Span Length : 65m)
S. No.
Parameter
Unit
4F ADSS OFC
Upto 65
Kg/m
KmpH
65
Installation Sag
1.0
Operational Sag
2.0
No
No of Loose Tube
No
mm
1.4
mm
2.0
Color of Fiber
White / Any.
mm
FRP Numbers
Nos
10
Kg/Km
1.5
11
mm
12
1.8
Black with Two Yellow
coloured Strips
13
Cable diameter
mm
6.0 0.3
14
Cable Weight
Kg/Km
30 4
15
White
Fibre Type
Maximum Cabled attenuation at 1310 nm
Maximum Cabled attenuation at 1550 nm
dB/Km
dB/Km
G652 D
0.35
0.21
dB/Km
0.23
ps/km
0.1
Description
2 (a)
MFD at 1310 nm
2 (b)
MFD at 1550 nm
8.6 m
Cladding Diameter -
2I
2 (d)
2I
Cladding Non-Circularity - 1 %
2 (f)
2 (g)
2 (h)
3 (a)
3 (b)
3I
3 (d)
3I
(After Hydrogen Ageing)
3 (f)
3 (g)
3 (f)
3 (g)
3 (h)
3 (i)
3 (j)
17.5
3(k)
22
3 (l)
S. No.
Description
3 (m)
3 (n)
<
3 (o)
3 (p)
0.092 ps/(nm.sq.km)
-
1300 1324 nm
1%
4 (a)
Test method IEC-60793-1-30
Dynamic Tensile strength (Un-aged) - > 3.8 Gpa
4 (b)
Test method IEC-60793-1-31
Dynamic Tensile strength (Aged)
4I
Test method IEC-60793-1-31
Stripability Force to remove primary coating 1.3 < F < 8.9 N
4 (d)
Test method IEC-60793-1-32
Dynamic Fatigue
>
20
4I
Test method IEC-60793-1-33
Static Fatigue
>
20
4 (f)
Test method IEC-60793-1-33
Fiber Curl
>
4.0 mtrs
4 (g)
Test method IEC-60793-1-34
Macro bend
4 (h)
Test method IEC-60793-1-47 / FOTP 62
Change in Attenuation when fiber is coiled with 100 turns on 30 + 0.1 mm radius
mandrel.
4 (h)(i)
4 (h)(ii)
OFC CONSTRUCTION
S. No.
Description
5 (a)
5 (b)
Buffer tube: Four numbers of primary coated colored fibers shall be protected by
loose packaging within a tube which shall be filled with thixotropic jelly.
Color sequence of fibers inside tubes should be Blue, Orange, Green& Brown.
5 (c)
Central Strength Member: Solid FRP non metallic strength member in the center
of the cable core shall be provided.
5 (d)
Cable Core: Primary coated fibers in loose tubes, stranded together around a
central strength member (using reverse lay techniques), shall form the cable core.
Color sequence of loose tubes around FRP should be Blue, Orange, Green, Brown,
Slate& White.
5 (e)
The main cable core containing fibers shall be wrapped by a layer of water swellable tape. Aramid yarn reinforcement shall be done over water swell-able tape to
provide sufficient tensile strength.
5 (f)
5 (g)
Two ripcords shall be placed diagonally opposite to each other below the outer
jacket to strip the HDPE outer jacket.
6 (a)
Test Method IEC 60794-1-2-E1
Crush resistance - 2500 N/100 MM X 100 MM
6 (b)
Test Method IEC 60794-1-2-E3
S. No.
Description
Impact Resistance 50 N from 0.5 M
6I
Test Method IEC 60794-1-2-E4
Torsion - +/- 180
6 (d)
Test Method IEC 60794-1-2-E7
Cable Bending Test 20 D, 4 Turns, 10 cycles
6I
Test Method IEC 60794-1-2 E11
Abrasion resistance - Needle 150 gm, Dia 1 mm, Weight 500 gm
6 (f)
6 (g)
IEC 60794-1-2 E6
Drip Test 30 cm, 70C, 24hr
6 (h)
IEC 60794-1-2-E14
Water Penetration test - 1m head, 3m samples, 24 hrs
6 (i)
IEC 60794-1-2 F5
7
7 (a)
7 (b)
7I
8 (a)
8 (b)
8I
8 (d)
Wind Speed
- 100 Km/hour
8I
Ice loading
- Nil
9 (a)
9 (b)
9(c )
S. No.
9 (d)
Description
Printing details : NAME OF MANUFACTURER SM G652 D 24 F ADSS Laser symbol
Year of manufacturer length code Meter Marking
(White Hot Foil Embossing)
9 (e)
Optical Fiber
4 F / Buffer tube
Color - Blue, Orange, Green, Brown
Loose tube
9 (f)
Number 6
Color Sequence Blue, Orange, Green, Brown, Slate, White
9 (g)
9 (h)
10
10 (a)
10 (b)
10 I
Annexure II
List of Accessories
A.1
Twisted Link
Stay Clamp
Tension Hook
Turn Buckle
Extension Link
Thimble
Terminating Helix
Jumper Cable Clamp
Protective Helix
A.2
Tension Hook:
Dimensions in MM:
L1
L2
L3
177
75
50
12
1
2
3
4
5
Description
Body
Nut
Plain Washer
Spring Washer
Spilt Pin
Material
Alloy Steel Galvanised
Mild Steel Galvanised
Mild Steel Galvanised
Spring Steel Galvanised
Stainless Steel
TENSION HOOK
NOT TO SCALE
A.3
Ref Spec
IS:2004
IS:1363
IS:2016
IS:3063
IS:549
Qty
Unit-MM
TURN BUCKEL:
Dimensions in MM:
L1
L2
170
100
L3
140
D1
18
D2
18
D3
12
1
2
3
Description
Body
Nut Bolt
Nut
Material
Mild Steel Forged Glav
Mild Steel Forged Glav
Mild Steel
Ref Spec
IS:2004
IS:2062
IS:1363
Qty
A.4
Extension Link:
Dimensions in MM:
L1
T1
465
5
W1
14
W2
16
W3
30
D1
16
1
2
3
4
Description
Strap
Rivet & Washer
Split Pin
Bolt & Nut M16
A.5
Material
Mild Steel Galvanised
Mild Steel Galvanised
Stainless Steel
Mild Steel Galvanised
Ref Spec
IS:2067
IS:2016
IS:549
IS:1363
Qty
Clevis Thimble:
Dimensions in MM:
L1
L2
L3
102
42
15
T1
4
T2
9
R1
23
R2
15
R3
8
W1
92
W2
40
W3
18
D1
16
Description
Clamp
Rivet M16 x 45
Washer
Split Pin
CLEVIS THIMBLE
NOT TO SCALE
Material
Aluminium Alloy GDC
Galv Steel
Galv Steel
Stainless Steel
Unit-MM
Ref Spec
IS:617
IS:2016
IS:2016
IS:549
Qty
A.6
For Example
Dimensions (For Cable Size, D 14.4 MM)
i.
DIA OF EACH WIRE 3.2 0.1
ii.
NO OF SETS 3
iii.
NO OF WIRE PER SET 5
iv.
LENGTH OF HELIX 1000
Dimension details for other cable size shall be indicated by the Manufacturer including the pitch of HELIX.
Note: Ends of RODS shall be deburred Tolerance shall be as per IS:2102
(Detail as per GR, Unless UNTILL Specified)
Description
Protective HElx
A.7
Material
Aluminium Alloy 6061
Ref Spec
Qty
Ref Spec
Qty
Terminating Helix:
T1
2.20.1
Description
DEADEHD GRIP
Material
Aluminised Steel
A.8
Dimensions in MM:
L1
L2
105
65
Dimensions in MM of Insert PAD:
L
40
D1
17.5
D2
5-6
INNER DIA
15
W
35
OUTER DIA
30
Description
STRAP
Insert
Wing Bolt
A.9
Material
Mild Steel GALY
Polychloradprene Compounded
Mild Steel GALY
Ref Spec
IS:2062
Qty
IS:2062
Dimensions in MM:
Pole Mouted Stay Clamp Tubular
L1
210
L2
20
D1
150
D2
16
T1
5
W
30
1
2
3
4
Description
Clamp
Bolt & Nut M16
Rivet 16
Washer
Material
Mild Steel Galvanised
Mild Steel Galvanised
Mild Steel Galvanised
Mild Steel Galvanised
Ref Spec
IS:2062
IS:1363
IS:2016
IS:2016
Qty
Split Pin
A.10
Stainless Steel
IS:549
L5
20
L6
32
L7
50
L8
120
T1
5
T2
20
D1
16
W1
60
1
2
3
4
5
A.11
Material
Mild Steel Galvanised
Mild Steel Galvanised
Mild Steel Galvanised
Mild Steel Galvanised
Stainless Steel
Twisted Link
Stay Clamp
Ref Spec
IS:2062
IS:1363
IS:2016
IS:2016
IS:549
Qty
Protective Helix
Suspension Set
Vibration Damper
A.12
Unit MM
Dimensions in MM:
L1
L2
W1
138
100
27
Note: - Tolerance shall be as per IS:2102
(Detail as per GR, Unless UNTILL Specified)
HOT DIP GAVANISED as per IS.2629
Description
Link
A.13
W2
38
Material
Mild Steel
DIA
18
Ref Spec
IS:2062
Qty
For Example
Dimensions (For Cable Size, D 14.4 MM)
i.
DIA OF EACH WIRE 3.2 0.1
ii.
NO OF SETS 3
iii.
NO OF WIRE PER SET 5
iv.
LENGTH OF HELIX 1400
Dimension details for other cable size shall be indicated by the Manufacturer including the pitch of HELIX.
Note: Ends of RODS shall be deburred Tolerance shall be as per IS:2102
(Detail as per GR, Unless UNTILL Specified)
Description
Protective HElx
Material
Aluminium Alloy 6061
Ref Spec
Qty
A.14
For Example
Dimensions:- Cable Size 14.4 MM DIA
Cable DIA
L1
L2
L3
L4
Colour Code
14.4
115
200
800
1400
Brown
DIA AGS
ROD
4.250.1
Note: Dimensions for different Cable Sizes to be decided after TEST Approval insert Dimensions in MM
Inner DIA
AT A- A - 22
AT B-B -22
Outer DIA
33
60
1
2
3
4
5
6
7
8
9
Description
Clamp
Inserts) Suspen Clipper
Strap
AGS Helix
Protective Helix
Rivet M16
Flat Washer
Split Pin
Twisted Eye
A.15
Material
Aluminium Alloy GDC
Polychloroprene Compounded
Aluminium Alloy
Aluminium Alloy6061
Aluminium Alloy6061
Mild Steel Galvanised
Mild Steel Galvanised
Stainless Steel
Mild Steel Galvanised
Ref Spec
IS:617
IS:617
IS:2062
IS:2016
IS:2549
IS:2062
Dimensions in MM:
L1
1346
GL
446
DL
900
D1
121
Qty
A.16
W1
50
W2
92
Qty
Demountable Pulley :
Dimensions in MM:
L1
280
A.17
Ref Spec
D
12
Ref Spec
Unit-MM
Features
Standard fiber count 24 to 48 F
Universal type i.e. suitable for all type of cable (ADSS OFC, Armoured
and metal free cable)
Provide scope for straight / branch joints
Resistant to chemicals and corrosive atmosphere.
Easy re-entry and closing with mechanical plastic clamp.
Shall be water and air proof.
Ribs on the body for extra strength
6 Cable entry port & 1 oval port
Suitable for cable size upto-30mm
Mounting Bracket for erecting on pole vertically straight.
Dome type
Dimensions
Length-395mm 5%
Qty
Outer diameter-273mm 5%
Annexure-III
Schedule-A
SL No.
Item Description
1.
Rate per kilometer for commissioning of last mile 4 core optical fibre
connectivity from the PoP room to the CPE point in the Government
office. The cost shall include the optical fibre and all the relevant
accessories/fittings/splicing/splitting etc. and installation of CPE at the
office and testing of the link from PoP to office.
2.
Rate per kilometer for commissioning of last mile 24 core optical fibre
connectivity from the PoP. The cost shall include the optical fibre and all
the relevant accessories/fittings/splicing/splitting etc.