Professional Documents
Culture Documents
New
Fire resistance F90 from below and from above with up to 3.5 m span width
Maximum spacing of ceiling profiles increased to 625 mm
2005-02
From above
Fire resistance
class
for fire exposure
from
below
from
above
Knauf System
Cladding
Type/
building
material
class
Substructure
Min.-
thickness
Max. axial
spacing
Insulation layer
(required for
fire protection)
ceiling profiles
b
Min.
mm
mm
Min.
thickness density
mm
kg/m
Proof
From below
without insulation
or
min. B2
Mineral wool S
60
50
F90
Fireboard
A1
Z-PA-III
4.290
2x 20
Fireboard
A1
Z-PA-III
4.290
20
+
625
20
upper cover
625
F90
F90
Proof
1
ABP P-3085/3824
Anchor
F90
solely from below
and from above
625 mm
312,5 mm
250 mm
300 mm
-
300 mm
300 mm
Connections to partitions
F90
1)
300 mm
2)
750 mm
Knauf UW runner, anchored
on metal studs of partition
with Knauf Multi-purpose
Screws 2x FN 4.3x65
Connect Knauf CW double
profiles on each top flange
with UW runner by riveting,
crimping or screwing with
Metal Screws LB 3.5x9.5 mm.
30 mm
additional
Fireboard
F90
additional
Fireboard
Flex
Profile
30 mm
100 mm
Knauf UW runner
Flex Profile
or
including covering strip using
Drywall Screws TN 3.5x25
on metal profiles
(penetration 10 mm)
metal gauge 0.7 mm
F90
solely from below
2x 20 Fireboard
1st layer TN 3.5x35
2nd layer TN 3.5x55
F90
solely from below and from above
20 Fireboard
TN 3.5x45
+ 12.5 covering strip
Maximum
spacing of
fasteners
500 mm
170 mm
170 mm
A
A
C
Room width in m
Max. spacing of
ceiling profiles
625 mm
Fireboard
Knauf UW runner
perimeter support
Min. thickness
in m
2x 20 mm
2
2.75
3.25
3.5
4
UW 50
UW 75
UW 100
UW 125
UW 150
90 mm
90 mm
Drywall Screw
TN 3.5x55
Knauf Fireboard 2x 20 mm
Fireboard Filler
625 mm
625 mm
Connect free-spanning Knauf CW double profile on each top flange with Knauf UW runner
by riveting, crimping or screwing with Metal Screws LB 3.5x9.5 (see page 3).
F90 partition
+ Fireboard 20 mm
20 mm
K219vu-D4
Knauf CW profile
Knauf UW runner as perimeter support
(anchoring acc. to page 3)
Fireboard strips
Drywall Screw TN
Knauf Fireboard 2x 20 mm
Fireboard Filler + Trenn-Fix 65
F90 partition
Knauf CW profile
20 mm
625 mm
connection to
K219vu-A3 Constructional
partition (A-A)
25
ca. 100 mm
K219vu-C4
a
25 25
ca. 100 mm
Knauf UW runner
as perimeter support
20 mm
K219vu-A4
Fireboard strip
e.g. joint profile
a
a 20 mm
K219vu-A5
A
C
C
b
625 mm
Fireboard
Knauf UW runner
perimeter support
Min. thickness
in m
20 mm
2.75
3.25
3.5
UW 100
UW 125
UW 150
Knauf UW runner as
perimeter support
140 mm
140 mm
Mineral wool
(see page 2)
625 mm
Drywall Screw
TN 3.5x45
625 mm
Connect free-spanning Knauf CW double profile on each flange with Knauf UW runner (see pagee 3).
Additional Fireboard 20 mm
100 mm Flex Profile
F90 partition
+ Fireboard 20 mm
connection to wall
K219vuvo-D4 Supporting
with shadow gap (D-D)
Fireboard strip
Drywall Screw TN
Knauf CW profile
Fireboard Filler + Trenn-Fix 65
F90 partition
625 mm b
connection to
K219vuvo-A3 Constructional
partition (A-A)
connection to
K219vuvo-A4 Constructional
wall with shadow gap (A-A)
Knauf Fireboard 20 mm
Fireboard strip
e.g. joint profile
10
ca. 100 mm
a 20 mm
Access panel
625 mm
420 mm
Clearance
625 mm
400 mm
SO1
SO3
SO3
600 mm
Clearance
SO1
SO2
SO4
SO2
2x 20 mm Fireboard encasement
Fold Knauf UW Profile and connect
with additional CW Profile
Additional continuous Knauf CW Profile
Knauf CW double profile
Scheme drawing, top view
625 mm
400 mm
40
SO4
Fold Knauf UW Profile and connect
with double profile
Knauf CW double profile
Note
625 mm
steel staples
acc. to DIN 18182
Built-in lighting
10 kg max.
Additional continuous
Knauf CW Profile
Access panel
420 mm
Clearance
K219vu-SO1
K219vu-SO3
Encasement made of
2x Knauf Fireboard 20 mm
Knauf UW Profile
Built-in lighting
10 kg max.,
fastening acc. to
providers spec.
Additional continuous
Knauf CW Profile
Access panel
600 mm
Clearance
K219vu-SO2
Longitudinal section
of built-in lighting
K219vu-SO4
Longitudinal section
of access panel
Access panel
625 mm
400 mm
SO3
SO1
SO3
600 mm
Clearance
SO1
625 mm
420 mm
Clearance
SO2
SO4
SO2
Additional continuous Knauf CW Profile
with 20 mm Fireboard strip on the
rear side
Knauf CW double profile with covering strip
Scheme drawing, top view
SO4
Circumferential 12.5 mm Fireboard strip
Fold Knauf UW Profile and slide on
double profile
Knauf CW double profile with covering strip
Scheme drawing, top view
Note
625 mm
400 mm
20 mm
625 mm
Mineral wool
(see page 2)
20 mm Knauf Fireboard,
applied on entire ceiling area
625 mm
Knauf UW Profile
Built-in lighting
10 kg max.,
fastening acc. to
providers spec.
Additional continuous Knauf
CW Profile with 20 mm
Fireboard strip on the rear side
Access panel
420 mm
Clearance
Circumferential 12.5 mm
Fireboard strip (applied after
installation of access panel)
Built-in lighting
10 kg max.
Additional continuous Knauf
CW Profile with 20 mm
Fireboard strip on the rear side
section
K219vuvo-SO2 Longitudinal
of built-in lighting
Knauf UW Profile
Access panel
600 mm
Clearance
Longitudinal section
K219vuvo-SO4 of
access panel
Description
Unit
Knauf Fireboard
2x 20 mm
Knauf Fireboard
20 mm
Perimeter Support
UW Profile 50x40x0.6; (4.0 m long)
UW Profile 75x40x0.6; (4.0 m long)
UW Profile 100x40x0.6; (4.0 m long)
UW Profile 125x40x0.6; (custom.)
UW Profile 150x40x0.6; (custom.)
Anchoring of UW Profiles as perimeter support:
Knauf Multi-purpose Screw FN 4.3 x 65 mm
or
Knauf
Ceiling Steel Dowel; (package 100 pcs)
or
Knauf
Nailable Plug "L" 8/80; (pakage 50 pcs)
or
suitable, approved anchor
or
or
or
or
or
or
or
or
0.8
2.7
pcs
2.6
0.8
5.3
2.6
2.6
-
0.2
0.2
-
pcs
as required
as required
Substructure
Knauf CW double profiles as ceiling profile:
CW Profile 50x50x0.6; (up to 5.0 m long)
or
CW Profile 75x50x0.6; (up tp 6.0 m long)
or
m
CW Profile 100x50x0.6; (up tp 6.0 m long)
or
CW Profile 125x50x0.6; (custom.)
or
CW Profile 150x50x0.6; (custom.)
Knauf CW double profiles, screw connected at web
Knauf Metal Screw LB 3.5 x 9.5 mm
pcs
Connection of double profiles with supporting UW runners:
or e.g. blind metal rivets
pcs
e.g. TN 3.5 x 25 mm
Insulation (observe fire protection requirements; see page 2) m
Cladding
3.0
3.0
-
2.4
2.4
2.6
as required
2.6
1.0
Knauf Fireboard; 20 mm
Knauf Drywall Screws; (fastening of Fireboard)
TN 3.5 x 35 mm
2.0
1.0
TN 3.5 x 45 mm
pcs
10
18
18
-
0.4
pcs
15
1.0
as required
-
as required
0.8
kg
0.12
1.1
1.0
as required
0.06
1.1
1.0
as required
TN 3.5 x 55 mm
Fireboard covering strip, 120 mm wide:
Knauf Fireboard; 12.5 mm
Knauf Drywall Screws; (fastening of covering strips)
TN 3.5 x 25 mm
additional layer (covering):
Knauf Fireboard; 20 mm
additional layer (upgrading of partition):
Knauf Fireboard; 20 mm
Flex Profile
Filling
10
No. of units
Unit price
Total price
.......... m
..........
..........
........... m
..........
..........
........... m
..........
..........
........... m
..........
..........
........... m
..........
..........
.......... pcs
..........
..........
........... pcs
..........
..........
........... pcs
..........
..........
Access panel,
........ fire resistance F90,
with aluminium frame, dimensions in mm .........................,
filling made of Knauf boards, thickness in mm ................. ,
for free-spanning ceiling.
Product: Knauf Access Panel D171
........... pcs
..........
..........
........... m
..........
..........
Sub-total ................
11
Construction
Knauf Free-Spanning Fireboard Ceilings A1 are
solely anchored on the walls at perimeter. Knauf
Fireboard (gypsum fleece boards of building material class A1) are fastened to a metal substructure made of Knauf CW double profiles. The application of additional loads like lighting fixtures with
max. 100 N (10 kg) per double profile (50 N per m
ceiling area) with suitable anchors directly to the
metal substructure is permissible.
Application
If the free-spanning ceiling is connected (anchored) to a lightweight partition (F90), an additional, 20 mm thick Fireboard cladding layer is required for the partition on the side of the supporting connection.
Substructure
Supporting perimeter connection made of UW
Profiles. Anchoring acc. to table on page 3. In
case of connection to a lightweight partition
(F90) and fire protection from below AND from
above, apply Flex Profile underneath the additional Fireboard layer on the partition for the anchoring of the supporting perimeter runner.
Spacing of anchors in this case: 312.5 mm
In case of sound protection requirements, seal
up carefully with Acoustical Sealant according
to DIN 4109, supplement 1, chapter 5.2; porous
sealant strips like Sealing Tape are usually not
suitable in this case.
Connect CW Profiles as double profiles at web
Cladding
Apply Knauf Fireboard parallely to CW double
profiles. Place long edge joints on profiles.
Stagger front edge joints by 400 mm min.
Start fastening Fireboards in the board centre or
Knauf Direct
Technical Advisory Service:
Phone: +49 9001 31-1000 *
Fax: +49 1805 31-4000 **
www.knauf.de
K219/engl./D/02.05/FB/D
A rate of 0.39 per minute will be charged for calls from within the German landline network. Callers whose phone numbers are not registered in the address database
of Knauf Gips KG, i.e. private builders or non-patrons, will be charged a rate of 1.69 per minute. Calls from mobile phones will be charged 1.48 per minute.
**
0.14 /Min.
All technical changes reserved. Only the current printed instructions are valid. Our warranty is expressly limited to our products in flawless condition. All application quantities and delivery amounts
are based on empirical data that are not easily transferable to other deviating areas. The stated information represents current state-of-the-art Knauf technology. The entire state of approved engineering rules, appropriate standards, guidelines, and rules of craftsmanship are not included herewith. These and all application instructions have to be adhered to separately by the installer.
All rights reserved. All amendments, reprints and photocopies, including those of excerpts, require the express permission of Knauf Gips KG, Am Bahnhof 7, 97346 Iphofen, Germany. Delivery
via professional building material distributors only, in accordance with our current business, delivery and payment terms.
The constructional and structural properties, and characteristic building physics of Knauf systems can solely be
ensured with the exclusive use of Knauf system components, or other products expressly recommended by Knauf.