Professional Documents
Culture Documents
Page Size=2048
*******************************
* NO bios Update is necessary *
*******************************
Basic registers of MII PHY #1: 3100 7849 2000 5c21 05e1 0000 0004 2001.
Basic mode status register 0x7849 ... 7849.
Link status: inactive.
Loading modules - please wait ...
watchdogd now in real time mode
DSP Manager OK
Fast Socket Initialization... Ok
init_module:no param_8021q=-1 is used
============ continue_rack_init ==============
DIL SWITCH VALUE = 0x2
PUC_device registered
Module DPNSS loaded
Module DSPx_LOAD loaded
Module UASIM loaded
mknod /dev/kparam0 c 240 0
mknod /dev/kincid0 c 241 0
insmod /lib/modules/2.2.18-rtl/alcatel/kdev_gen.o
====== record_country_correspondaces
====== record_default_country 0 (DEFAULT COUNTRY : HU based with Poland tones)
WARNING: network link not established - check cables
Loading MCV module - please wait ...
Rack 0 is a large
Startup completed - awaiting user login ...
DSP firmware successfully read in flash (size=779436)
Starting /etc/rcS.d/96CC
Interrupt network for entropy is disabled
Starting /etc/rcS.d/99crond
Start VG_PROCESS using /dev/rtf5 and /dev/rtf4
Trace OFF
Welcome to GD
WARNING: network link not established - check cables
WARNING: root account has no password
Use 'passwd root' to enter a valid password
eMGD login:
*****************************************************************
* Connect to callserver failed + no login within 2 mn => reboot *
*****************************************************************
INIT: Switching to runlevel: 6
INIT: Saving e-mgd configuration files ...
Saving System Clock in Hardware Clock ...
Saving random seed
No backtrace
cp: /var/log/IPT_SecClientLog.xml: No such file or directory
Sending all processes the TERM signal...
Sending all processes the KILL signal..
Unmounting file systems
Please stand by while rebooting the system...
Restarting system.
ShutOK cleared!
Alize BIOS Monitor
*** BIOS Version 3EH30227ALAC bios100/011.003 ***
*** Generated on Dec/16/2008 at 11:27 ***
memory test started lng=133169152 with 0
running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3FF80000
DIMM characteristics->: JEDEC Manu ID:,......
Memory type(EDO,FPM..):0x 4
# of row address:13
# of col address 9
# of module row 1
PCI: Using configuration type 1
Page Size=2048
BATMODE testing
Static Boot from hard disk #0(3)
unable to boot on DISK
Static Boot from No Boot Device selected(0)
Static Boot from flash NAND mother(1)
BOOT Sector Found on NAND Flash Drive #0
Shutdown of the interface 0 =
0
init ethernet interface 1 not done
Watch dog started
Linux version 2.2.18-rtl (che_int@inchhy22) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 8 17:54:00
IST 2009
Calibrating delay loop... 65.74 BogoMIPS
Memory: 122720k/131072k available (644k kernel code, 408k reserved, 1584k data, 36k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
ShutOK cleared!
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: AMD 486 DX/4-WB stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 20480K size
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 36k freed
Warning: unable to open an initial console.
Initial console created for init
RTLinux Extensions Loaded (http://www.fsmlabs.com/)
Starting watchdog timer daemon using /dev/rtf3
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Remounting root read-write....
modprobe: modprobe: Can't locate module char-major-4
e-mgd board found - setting up ramdisk
Remount - Forces the media to be remounted
Datalight FlashFx
V4.06.500 Back ported to OmniPCX MediaGateway
Copyright (c) 1993-2005
Patent US#5860082
Disk Remounted
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
/dev/fla: clean, 80/30360 files, 11423/121396 blocks
/dev/fla on /mnt/flash type ext2 (rw)
Set initial public keys
/mnt/flash/local/ifcfg-eth0: OK
Find ip configuration in /mnt/flash/local/
/mnt/flash/local/startup.cfg: OK
Find startup configuration in /mnt/flash/local/
Reading of configuration in flash finished
Initializing random number generator
INIT: Entering runlevel: 3
Trying to map the io space of the board(=1). Wait 10 sec...
Compression daughter board type [MADA]
mada_3 DSP daughter board
e-MGD version 44.26
Media Gateway Software R9.0 loading ...
No password file found - using default password list
Duplex mode : auto-negociation
Starting /etc/rcS.d/01fifos
Starting /etc/rcS.d/05syslog
Starting /etc/rcS.d/10network
Starting /etc/rcS.d/90init
BIOS updater is now working ... getting current version information
Check if we need to update with bios 3EH30227ALAC bios100/011.003 ...
Reboot after bios update is enabled...
----- RetrieveFlashNorInfo ----NOR VERSION
: Bios Version in soldered NOR flash : 3EH30227ALAC bios100/011.003 len = 28
- Flash Nor Informations Flash AMD
Size
: 512 Kbytes
Number of sectors : 11
----- CompareBiosVersions ----CURRENT=011.003 FILE=0eth0 : chip revision 0403.
11.003
*******************************
* NO bios Update is necessary *
*******************************
Basic registers of MII PHY #1: 3100 7849 2000 5c21 05e1 0000 0004 2001.
Basic mode status register 0x7849 ... 7849.
Link status: inactive.
Loading modules - please wait ...
watchdogd now in real time mode
DSP Manager OK
Fast Socket Initialization... Ok
init_module:no param_8021q=-1 is used
============ continue_rack_init ==============
Rack 0 is a large
Startup completed - awaiting user login ...
DSP firmware successfully read in flash (size=779436)
Starting /etc/rcS.d/96CC
Interrupt network for entropy is disabled
Starting /etc/rcS.d/99crond
Start VG_PROCESS using /dev/rtf5 and /dev/rtf4
Trace OFF
Welcome to GD
WARNING: network link not established - check cables
WARNING: root account has no password
Use 'passwd root' to enter a valid password
eMGD login:
*****************************************************************
* Connect to callserver failed + no login within 2 mn => reboot *
*****************************************************************
INIT: Switching to runlevel: 6
INIT: Saving e-mgd configuration files ...
Saving System Clock in Hardware Clock ...
Saving random seed
No backtrace
cp: /var/log/IPT_SecClientLog.xml: No such file or directory
Sending all processes the TERM signal...
Sending all processes the KILL signal..
Unmounting file systems
Please stand by while rebooting the system...
Restarting system.
ShutOK cleared!
Alize BIOS Monitor
*** BIOS Version 3EH30227ALAC bios100/011.003 ***
*** Generated on Dec/16/2008 at 11:27 ***
memory test started lng=133169152 with 0
running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3FF80000
DIMM characteristics->: JEDEC Manu ID:,......
Memory type(EDO,FPM..):0x 4
# of row address:13
# of col address 9
# of module row 1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI:scan_bus for bus 0
PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
PCI:bus=00h,devfn=60h ,[vendor:device]=[100Bh/0020h]
PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
PCI:scan_buses with 00h secondary buses
PCI:command = 3FFH for device 00:00
PCI: Assigning I/O space FC00-FCFF for 00:60 BAR=
10
PCI:Assign memory space BFFFF000H to BFFFFFFFH for device 00:60
PCI:command = 3FFH for device 00:60
PCI:Assign memory space BFFFD000H to BFFFDFFFH for device 00:98
PCI: Assigning I/O space FD00-FD1F for 00:98 BAR=
14
PCI: Unable to handle I/O allocation for 00:98 (FF04) BAR=
18
PCI:command = 3FFH for device 00:98
Page Size=2048
ALIZE informations :
Memory Detected : 131072 Ko
Flash Detected
DaughterBoard Detected
DSP Voip Found : 1
XCHANGE Detected
XCHANGE Chip Initialization OK
Ethernet Found : 1
Ethernet Chip Initialization OK
Hard Disk Not Detected
PCM11 selected
CPU at 133 mhz
check lock RTC
value of DIL switch 2
YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !
BATMODE testing
Static Boot from hard disk #0(3)
unable to boot on DISK
Static Boot from No Boot Device selected(0)
Static Boot from flash NAND mother(1)
BOOT Sector Found on NAND Flash Drive #0
Shutdown of the interface 0 =
0
init ethernet interface 1 not done
Watch dog started
Linux version 2.2.18-rtl (che_int@inchhy22) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 8 17:54:00
IST 2009
Calibrating delay loop... 65.74 BogoMIPS
Memory: 122720k/131072k available (644k kernel code, 408k reserved, 1584k data, 36k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
ShutOK cleared!
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: AMD 486 DX/4-WB stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 20480K size
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 36k freed
Warning: unable to open an initial console.
Initial console created for init
RTLinux Extensions Loaded (http://www.fsmlabs.com/)
Starting watchdog timer daemon using /dev/rtf3
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Remounting root read-write....
modprobe: modprobe: Can't locate module char-major-4
e-mgd board found - setting up ramdisk
Remount - Forces the media to be remounted
Datalight FlashFx
V4.06.500 Back ported to OmniPCX MediaGateway
Copyright (c) 1993-2005
Patent US#5860082
Disk Remounted
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
/dev/fla: clean, 80/30360 files, 11423/121396 blocks
/dev/fla on /mnt/flash type ext2 (rw)
Set initial public keys
/mnt/flash/local/ifcfg-eth0: OK
Find ip configuration in /mnt/flash/local/
/mnt/flash/local/startup.cfg: OK
Find startup configuration in /mnt/flash/local/
Reading of configuration in flash finished
Initializing random number generator
: 00:80:9f:70:4a:92
: 10.23.214.10
: 255.255.255.0
: 10.23.214.1
: 10.23.214.2