You are on page 1of 12

TL080

JFET-INPUT OPERATIONAL AMPLIFIER


SLOS368 JUNE 2001

D
D
D
D
D
D
D
D
D
D

P PACKAGE
(TOP VIEW)

Low Power Consumption


Wide Common-Mode and Differential
Voltage Ranges
Low Input Bias and Offset Currents
Output Short-Circuit Protection
Low Total Harmonic
Distortion . . . 0.003% Typ
High Input Impedance . . . JFET Input Stage

N1/COMP
IN
IN+
VCC

COMP
VCC+
OUT
OFFSET N2

External Frequency Compensation


Common-Mode Input Voltage Range
Includes VCC+
Latch-Up-Free Operation
High Slew Rate . . . 13 V/s Typ

description
The TL080 JFET-input operational amplifier incorporates well-matched, high-voltage JFET and bipolar
transistors in an integrated circuit. This device features high slew rates, low input bias and offset currents, and
a low offset-voltage temperature coefficient. Offset adjustment and external-compensation options are
available.
The TL080C is characterized for operation from 0C to 70C.
AVAILABLE OPTIONS
PACKAGE
TA

VIOmax
AT 25C

PLASTIC
DIP
(P)

0C to 70C

10 mV

TL080CP

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2001, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.


Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

schematic
VCC+

IN+

3
2

64

IN

128

6
OUT

N1/COMP

OFFSET N2

64

8
COMP

1080
VCC

1080

All component values shown are nominal.

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Input voltage, VI (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Duration of short-circuit current (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, JA (see Notes 5 and 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC.
2. Differential voltages are at IN+ with respect to IN.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output can be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
5. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can impact reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.

electrical characteristics, VCC = 15 V (unless otherwise noted)


PARAMETER

TEST CONDITIONS

VIO

Input offset voltage

VO = 0
0,

RS = 50

aV

Temperature coefficient of input offset voltage

VO = 0,

RS = 50

IO

IIO

Input offset current

VO = 0

IIB

Input bias current

VICR

Common-mode input voltage range

VOM

Maximum peak output voltage swing

TA
25C

MIN

TYP

MAX

15

Full range

20

200

pA

nA

30

400

pA

10

nA

Full range
25C

11

12
to 15

25C

12

13.5

Full range

RL 2 k
VO = 10 V,
V RL 2 k

10

12

25

200

Full range

15

Large signal differential voltage amplification


Large-signal

B1
ri

Unity-gain bandwidth

25C

Input resistance

25C

CMRR

Common-mode rejection ratio

VIC = VICRmin,
VO = 0, RS = 50

kSVR

Supply-voltage rejection ratio (VCC/VIO)

VCC = 15 V to 9 V,
VO = 0, RS = 50

25C

ICC
VO1/VO2

Supply current

VO = 0,

25C

12

25C

AVD

No load

V/C

18

25C
25C

RL = 10 k
RL 10 k

mV

Full range

Full range

VO = 0

UNIT

V/mV

3
1012

MHz

25C

70

86

dB

70

86

dB

1.4

2.8

mA

Crosstalk attenuation
AVD = 100
25C
120
dB
All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is
40C to 85C.
Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in
Figure 5. Pulse techniques must be used that will maintain the junction temperature as close to the ambient temperature as possible.

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

operating characteristics, VCC = 15 V, TA = 25C


PARAMETER

TEST CONDITIONS

SR

Slew rate at unity gain

VI = 10 V,

RL = 2 k,

CL = 100 pF,

See Figure 1

tr

Rise
time overshoot factor
Rise-time

VI = 20 mV,
mV

RL = 2 k
k,

CL = 100 pF
pF,

See Figure 1

Vn

Equivalent input noise voltage

RS = 100

In

Equivalent input noise current

RS = 100 ,

f = 1 kHz

THD

Total harmonic distortion

VO(rms) = 10 V,

RS 1 k,

MIN

TYP

13

MAX

V/s
s

0.05
20%

f = 1 kHz

18

nV/Hz

f = 10 Hz to 10 kHz

0.01
RL 2 k,

UNIT

f = 1 kHz

pA/Hz

0.003%

APPLICATION INFORMATION

10 k
OUT

1 k

VI

OUT

CL =
100 pF

RL = 2 k

VI

RL

CC = 18 pF

Figure 1. Unity-Gain Amplifier

CL = 100 pF

Figure 2. Gain-of-10 Inverting Amplifier

100 k

VCC+

C2
1 M
C1 = 500 pF
2 M
N2

CC

N1
IN

OUT

IN

COMP
OUT

Figure 3. Feed-Forward Compensation

POST OFFICE BOX 655303

IN+

N1

Figure 4. Input Offset Voltage Null Circuit

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE

Maximum peak output voltage

vs Frequency
vs Free-air temperature
vs Load resistance
vs Supply voltage

5, 6, 7
8
9
10

Large signal differential voltage amplification


Large-signal

vs Free-air temperature
vs Frequency

11
12

Differential voltage amplification

vs Frequency

13

Total power dissipation

vs Free-air temperature

14

ICC

Supply current

vs Free-air temperature
vs Supply voltage

14
15

IIB

Input bias current

vs Free-air temperature

16

VOM

AVD
PD

Large-signal pulse response

vs Time

17

VO
CMRR

Output voltage

vs Elapsed time

18

Common-mode rejection ratio

vs Free-air temperature

19

Vn
THD

Equivalent input noise voltage

vs Frequency

20

Total harmonic distortion

vs Frequency

21

MAXIMUM PEAK OUTPUT VOLTAGE


vs
FREQUENCY

MAXIMUM PEAK OUTPUT VOLTAGE


vs
FREQUENCY
15

VCC = 15 V

RL = 10 k
TA = 25C
See Figure 2

12.5

10

VCC = 10 V

7.5

VCC = 5 V

2.5

VOM Maximum Peak Output Voltage V

VOM Maximum Peak Output Voltage V

15

RL = 2 k
TA = 25C
See Figure 2

VCC = 15 V

12.5
10

VCC = 10 V
7.5
5
VCC = 5 V
2.5

0
100

1k

10 k

100 k

1M

10 M

100

f Frequency Hz

1k

10 k

100 k

1M

10 M

f Frequency Hz

Figure 5

Figure 6

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

TYPICAL CHARACTERISTICS
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREQUENCY

MAXIMUM PEAK OUTPUT VOLTAGE


vs
FREE-AIR TEMPERATURE

TA = 25C

12.5

10
TA = 55C
7.5

TA = 125C

2.5

0
10 k

40 k 100 k

400 k

1M

4M

15

VCC = 15 V
RL = 2 k
See Figure 2

VOM Maximum Peak Output Voltage V

VOM Maximum Peak Output Voltage V

15

RL = 10 k

12.5

RL = 2 k

10
7.5

5
2.5

VCC = 15 V
See Figure 2

0
75

10 M

50

25

Figure 7

50

75

100

125

Figure 8
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE

MAXIMUM PEAK OUTPUT VOLTAGE


vs
LOAD RESISTANCE
15

15
VCC = 15 V
TA = 25C
See Figure 2

12.5

VOM Maximum Peak Output Voltage V

VOM Maximum Peak Output Voltage V

25

TA Free-Air Temperature C

f Frequency Hz

RL = 10 k
TA = 25C

12.5

10

7.5

2.5

10

7.5

2.5

0
0.1

0.2

0.4

0.7

10

Figure 10

Figure 9

POST OFFICE BOX 655303

10

12

| VCC | Supply Voltage V

RL Load Resistance k

DALLAS, TEXAS 75265

14

16

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

1000
400
200
100
40
20
10

4
2

1
75

VCC = 15 V
VO = 10 V
RL = 2 k
50

25

25

50

75

100

125

TA Free-Air Temperature C

106

LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE SHIFT
vs
FREQUENCY

VCC = 5 V to 15 V
RL = 2 k
TA = 25C

105

104

Differential
Voltage
Amplification
(left scale)

103

102

Phase Shift
(right scale)

101

10

100

10 k

100 k

1M

45

90

135

180
10 M

f Frequency Hz

Figure 11

Figure 12

DIFFERENTIAL VOLTAGE AMPLIFICATION


vs
FREQUENCY WITH FEED-FORWARD COMPENSATION

SUPPLY CURRENT PER AMPLIFIER


vs
FREE-AIR TEMPERATURE

106

2.0
VCC = 15 V
C2 = 3 pF
TA = 25C
See Figure 3

105

104

103

102

VCC = 15 V
No Signal
No Load

1.8
I CC Supply Current mA

AVD Differential Voltage Amplification V/mV

1k

Phase Shift

LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE

A VD Large-Signal Differential Voltage Amplification V/mV

A VD Large-Signal Differential Voltage Amplification V/mV

TYPICAL CHARACTERISTICS

1.6
1.4
1.2
1.0
0.8
0.6
0.4

10
0.2
1
100

1k

10 k

100 k

1M

10 M

0
75

50

25

25

50

75

100

125

TA Free-Air Temperature C

f Frequency Hz

Figure 13

Figure 14

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE

SUPPLY CURRENT
vs
SUPPLY VOLTAGE
100

2.0

1.6

I IB Input Bias Current nA

I CC Supply Current mA

V CC = 15 V

TA = 25C
No Signal
No Load

1.8

1.4
1.2
1.0
0.8
0.6

10

0.1

0.4
0.2
0.01
50

0
0

10

12

14

16

25

| VCC | Supply Voltage V

Figure 15

50

75

100

125

Figure 16
OUTPUT VOLTAGE
vs
ELAPSED TIME

VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
6

28

VCC = 15 V
RL = 2 k
CL = 100 pF
TA = 25C

24
VO Output Voltage mV

Input and Output Voltages V

25

TA Free-Air Temperature C

Output
2

2
Input

20
16

VCC = 15 V
RL = 2 k
CL = 100 pF
TA = 25C
See Figure 1

12
8
4

4
0
6

4
0

0.5

1.5

2.5

3.5

t Time s

Figure 17

0.2

0.4

0.6

t Elapsed Time s

Figure 18

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

0.8

1.0

1.2

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY

COMMON-MODE REJECTION RATIO


vs
FREE-AIR TEMPERATURE
50
Vn Equilvalent Input Noise Voltage nV/ Hz

VCC = 15 V
RL = 10 k

88

87

86

85

84

83
75

VCC = 15 V
AVD = 10
RS = 100
TA = 25C

40

30

20

10

0
50

25

25

50

75

100

125

10

40

100

TA Free-Air Temperature C

400 1 k

4 k 10 k

40 k 100 k

f Frequency Hz

Figure 19

Figure 20
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
1
VCC = 15 V
AVD = 1
VI(RMS) = 6 V
TA = 25C

0.4
THD Total Harmonic Distortion %

CMRR Common-Mode Rejection Ratio dB

89

0.1
0.04

0.01
0.004

0.001

100

400

1k

4k

10 k

40 k

100 k

f Frequency Hz

Figure 21

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 JUNE 2001

APPLICATION INFORMATION
220 k
0.00375 F
10 k
0.01 F

0.003 F

0.03 F

27 k
MIN
VCC+

100

TL080
+

1 F

Input

100

75 F

47 k
10 pF

3.3 k

10 k

0.003 F

5 k +
Gain 47 F

TL080
+
VCC
10 pF

50 pF

POST OFFICE BOX 655303

VCC+

68 k

Figure 22. IC Preamplifier

10

MIN
100 k
Treble
MAX

0.03 F

VCC
Balance

10 k

100 k
Bass
MAX

DALLAS, TEXAS 75265

Output

IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its products to the specifications applicable at the time of sale in accordance with
TIs standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary
to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except
those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customers applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
products or services might be or are used. TIs publication of information regarding any third partys products
or services does not constitute TIs approval, license, warranty or endorsement thereof.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation
or reproduction of this information with alteration voids all warranties provided for an associated TI product or
service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Resale of TIs products or services with statements different from or beyond the parameters stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service,
is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm

Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265

Copyright 2001, Texas Instruments Incorporated

This datasheet has been download from:


www.datasheetcatalog.com
Datasheets for electronics components.

You might also like