Professional Documents
Culture Documents
CATALOGUE
September 2011
1/09/11 3:20 PM
Orrcon Steel is a leading distributor and manufacturer of steel, tube and pipe in Australia.
Our distribution centres are strategically located in Queensland, New South Wales,
Victoria, South Australia and Western Australia providing a national distribution network.
This network is complemented by an extensive spread of resellers and stockists in
metropolitan and rural Australia.
We have two Australian manufacturing sites - a structural tubular mill in Brisbane and a
precision tube mill in Adelaide.
Orrcon Steel adheres to principles of quality, innovation, flexibility and dedication.
These principles are achieved by going the extra mile in everything we do and working in
partnership with our customers.
Precision Tube:
Orrcon Steel manufactures square, rectangular, round and oval precision tube and
can also manufacture special shapes subject to enquiry. All precision products are
manufactured to comply with AS/NZS 1450.
Extended Range:
1/09/11 3:20 PM
12
2
3
6
8
9
10
29
30
31
32
33
33
35
28
36
36
36
37
40
40
41
42
44
44
45
46
47
50
50
60
61
61
63
51
51
51
53
54
57
58
59
4
43
12
13
15
17
19
19
20
20
21
23
23
25
1
1/09/11 3:20 PM
2
18560 Orrcon National Product Brochure.indd 2
1/09/11 3:20 PM
Size dxb
(mm)
Nom. Thick
(mm)
20 x 20
25 x 25
25 x 25
25 x 25
25 x 25
1.6
1.6
2.0
2.5
3.0
30 x 30
30 x 30
30 x 30
30 x 30
35 x 35
35 x 35
35 x 35
35 x 35
40 x 40
40 x 40
40 x 40
40 x 40
40 x 40
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
1.6
2.0
2.5
3.0
1.6
2.0
2.5
3.0
1.6
2.0
2.5
3.0
4.0
1.6
2.0
2.5
3.0
4.0
5.0
6.0
65 x 65
65 x 65
65 x 65
65 x 65
65 x 65
65 x 65
65 x 65
1.6
2.0
2.5
3.0
4.0
5.0
6.0
Surface Finish
Nom. Linear Nom. Mtre/
Mass (Kg/m)
Tonne
PTD
ALLGAL
6500mm Lengths Standard
0.87
1146
1.12
890
1.36
733
1.64
610
1.89
529
1.68
596
2.03
492
2.36
423
1.63
615
1.99
502
2.42
412
2.83
353
1.88
533
2.31
434
2.82
355
3.30
303
4.09
244
2.38
420
2.93
341
3.60
278
4.25
236
5.35
187
6.39
156
7.32
137
3.88
258
4.78
209
5.66
177
7.23
138
8.75
114
10.15
99
Lengths
/ Pack
Lengths
/ MiniPak
100
100
100
100
100
49
49
49
49
49
100
100
100
64
100
100
64
64
81
81
64
64
49
64
64
49
49
36
30
25
49
49
49
36
49
49
30
30
36
36
30
30
25
30
30
25
25
20
16
12
49
42
42
36
30
25
20
25
20
20
20
16
12
12
3
1/09/11 3:20 PM
1
1.1.1 Square Hollow Sections (SHS)
Nom. Thick
(mm)
75 x 75
75 x 75
75 x 75
75 x 75
75 x 75
75 x 75
75 x 75
89 x 89
89 x 89
89 x 89
89 x 89
89 x 89
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
100 x 100
2.0
2.5
3.0
3.5
4.0
5.0
6.0
2.0
2.5
3.5
5.0
6.0
2.0
2.5
3.0
4.0
5.0
6.0
9.0
Surface Finish
Nom. Linear Nom. Mtre/
Tonne
PTD
ALLGAL Mass (Kg/m)
8000mm & 12000mm Lengths Standard
4.50
222
5.56
180
6.60
152
7.53
133
8.49
118
10.32
97
12.03
83
5.38
186
6.66
150
9.07
110
12.51
80
14.67
68
6.07
165
7.53
133
8.96
112
11.63
86
14.24
70
16.74
60
23.50
43
Lengths
/ Pack
Lengths
/ MiniPak
30
30
30
25
25
20
16
25
20
20
16
12
20
20
20
12
12
12
9
16
16
16
12
12
9
9
9
9
9
9
6
12
9
9
9
6
6
4
18560 Orrcon National Product Brochure.indd 4
1/09/11 3:20 PM
cont...
Size dxb
(mm)
Nom.
Thick
(mm)
125 x 125
125 x 125
125 x 125
125 x 125
150 x 150
150 x 150
150 x 150
200 x 200
200 x 200
200 x 200
200 x 200
200 x 200
250 x 250
250 x 250
250 x 250
250 x 250
300 x 300
300 x 300
300 x 300
300 x 300
350 x 350
350 x 350
350 x 350
400 x 400
400 x 400
400 x 400
4.0
5.0
6.0
9.0
5.0
6.0
9.0
5.0
6.0
9.0
12.5
16.0
6.0
9.0
12.5
16.0
6.0
9.0
12.5
16.0
9.0
12.5
16.0
9.0
12.5
16.0
Surface
Finish
PTD
Nom.
Lengths Lengths
Mtre/
/ Pack
/ Pack
Tonne
8000mm 12000mm
ALLGAL
8000mm & 12000mm Lengths Standard
14.80
68
9
9
18.17
55
9
9
21.45
47
9
9
30.60
33
8
4
22.10
45
9
6
26.20
38
6
6
37.70
27
6
4
29.90
33
6
4
35.60
28
4
4
51.80
19
4
2
69.40
14
2
2
85.50
12
1
1
45.00
22
4
2
65.90
15
2
2
89.00
11
1
111.00
9
1
54.42
18
1
1
80.05
12
1
109.00
9
1
136.00
7
1
94.18
11
1
128.00
8
1
161.00
6
1
108.31
9
1
148.00
7
1
186.00
5
1
Nom. Linear
Mass (Kg/m)
Lengths
/ MiniPak
6
6
4
NOTE:
Non standard sizes, surface finishes and lengths available subject to enquiry.
Minimum order quantities (MOQs) apply.
C450L0 grade available for some sizes, subject to enquiry. Minimum order quantities (MOQs)
apply.
NOPC & OILED available subject to enquiry.
* Refer to Glossary of Terms
5
1/09/11 3:20 PM
1
1.1.2 Rectangular Hollow Sections (RHS)
Nom. Thick
(mm)
1.6
2.0
2.5
3.0
1.6
2.0
2.5
3.0
4.0
1.6
2.0
2.5
1.6
2.0
2.3
2.5
3.0
4.0
5.0
6.0
1.6
2.0
2.5
3.0
3.5
4.0
5.0
6.0
Surface Finish
Nom. Linear Nom. Mtre/
Mass (Kg/m)
Tonne
PTD
ALLGAL
8000mm Lengths Standard
1.75
571
2.15
465
2.62
382
3.07
326
2.38
420
2.93
341
3.60
278
4.25
236
5.35
187
2.38
420
2.93
341
3.60
278
3.01
332
3.72
269
4.24
236
4.58
218
5.42
184
6.92
145
8.35
120
9.67
103
3.64
275
4.50
222
5.56
180
6.60
152
7.53
133
8.49
118
10.32
97
12.03
83
Lengths
/ Pack
Lengths
/ MiniPak
96
96
72
60
54
54
54
45
45
65
65
48
42
42
42
42
35
28
24
20
32
32
32
32
24
24
18
15
48
48
36
30
24
24
24
21
21
32
32
24
20
20
20
20
18
12
12
12
15
15
15
15
12
12
9
9
NOTE:
Some 5.0mm ALLGAL sections available ex-rolling. Minimum order quantities (MOQs) apply.
Non standard sizes, surface finishes and lengths available subject to enquiry. Minimum order
quantities (MOQs) apply.
C450L0 grade available for some sizes, subject to enquiry. Minimum order quantities (MOQs) apply.
NOPC & OILED available subject to enquiry.
* Refer to Glossary of Terms
6
18560 Orrcon National Product Brochure.indd 6
1/09/11 3:20 PM
Size dxb
(mm)
Nom.
Thick
(mm)
125 x 75
125 x 75
125 x 75
125 x 75
125 x 75
125 x 75
150 x 50
150 x 50
150 x 50
150 x 50
150 x 50
150 x 50
150 x 100
150 x 100
150 x 100
150 x 100
150 x 100
200 x 100
200 x 100
200 x 100
200 x 100
250 x 150
250 x 150
250 x 150
250 x 150
250 x 150
300 x 200
300 x 200
300 x 200
300 x 200
350 x 250
350 x 250
400 x 200
400 x 200
400 x 200
400 x 300
400 x 300
400 x 300
2.0
2.5
3.0
4.0
5.0
6.0
2.0
2.5
3.0
4.0
5.0
6.0
3.0
4.0
5.0
6.0
9.0
4.0
5.0
6.0
9.0
5.0
6.0
9.0
12.5
16.0
6.0
9.0
12.5
16.0
12.5
16.0
6.0
9.0
12.5
9.0
12.5
16.0
Lengths Lengths
/ Pack
/ Pack
8000mm 12000mm
ALLGAL
8000mm & 12000mm Lengths Standard
6.07
165
20
7.53
133
20
20
8.96
112
20
20
11.63
86
15
15
14.24
70
15
15
16.74
60
12
12
6.07
165
21
21
7.53
133
21
21
8.96
112
21
21
11.63
86
15
15
14.24
70
15
15
16.74
60
15
15
11.31
88
12
12
14.77
68
12
12
18.17
55
12
12
21.45
47
9
9
30.60
33
6
4
17.90
56
8
6
22.10
45
8
6
26.20
38
8
4
37.70
27
6
4
29.94
33
6
4
35.58
28
4
4
51.79
19
4
2
69.40
14
2
2
85.50
12
1
1
45.00
22
2
65.92
15
2
89.00
11
1
111.00
9
1
109.00
9
1
136.00
7
1
54.42
18
1
80.05
12
1
109.00
9
1
94.18
11
1
128.00
8
1
161.00
6
1
Lengths
/ MiniPak
12
12
12
8
8
6
15
12
12
8
8
8
8
8
8
4
4
7
1/09/11 3:20 PM
1
1.1.3 Rectangular Hollow Sections (RHS)
Nom. Thick
(mm)
38 x 25
38 x 25
38 x 25
50 x 20
50 x 20
50 x 20
50 x 20
50 x 30
50 x 30
50 x 40
76 x 38
76 x 38
76 x 38
76 x 38
76 x 38
80 x 40
80 x 40
102 x 76
102 x 76
102 x 76
127 x 51
127 x 51
127 x 51
127 x 51
127 x 51
127 x 51
127 x 51
152 x 76
152 x 76
152 x 76
1.6
2.0
2.5
1.6
2.0
2.5
3.0
2.0
2.5
2.0
1.6
2.0
2.5
3.0
4.0
1.6
2.5
3.5
5.0
6.0
2.0
2.5
3.0
3.5
4.0
5.0
6.0
3.5
5.0
6.0
Surface Finish
Nom. Linear Nom. Mtre/
Mass (Kg/m)
Tonne
PTD
ALLGAL
8000mm Lengths Standard
1.45
689
1.77
564
2.15
465
1.63
615
1.99
502
2.42
412
2.83
353
2.31
434
2.82
355
2.62
382
2.73
366
3.37
296
4.15
241
4.90
204
6.23
161
2.88
347
4.39
228
9.07
110
12.51
80
14.67
68
5.38
186
6.66
150
7.92
126
9.07
110
10.24
98
12.51
80
14.67
68
11.81
85
16.44
61
19.38
52
Lengths
/ Pack
Lengths
/ MiniPak
72
72
72
96
96
72
72
96
48
90
50
56
45
40
32
36
36
20
15
12
27
27
18
9
12
12
9
12
12
9
36
36
36
48
48
36
36
20
20
18
18
9
9
6
6
6
6
6
NOTE:
Minimum order quantities (MOQs) apply.
C450L0 grade available for some sizes subject to enquiry. Minimum order quantities (MOQs)
apply.
NOPC & OILED available subject to enquiry.
* Refer to Glossary of Terms
8
18560 Orrcon National Product Brochure.indd 8
1/09/11 3:20 PM
NB
d0 Nom. Thick Class
(mm) AS1074
(mm) (mm)
20
20
20
20
25
25
25
25
32
32
32
32
40
40
40
40
50
50
50
50
65
65
65
65
80
80
80
80
90
90
90
90
100
100
100
100
100
25.4
26.9
26.9
26.9
26.9
33.7
33.7
33.7
33.7
42.4
42.4
42.4
42.4
48.3
48.3
48.3
48.3
60.3
60.3
60.3
60.3
76.1
76.1
76.1
76.1
88.9
88.9
88.9
88.9
101.6
101.6
101.6
101.6
114.3
114.3
114.3
114.3
114.3
2.0
2.0
2.3
2.6
3.2
2.0
2.6
3.2
4.0
2.0
2.6
3.2
4.0
2.3
2.9
3.2
4.0
2.3
2.9
3.6
4.5
2.3
3.2
3.6
4.5
2.6
3.2
4.0
5.0
2.6
3.2
4.0
5.0
2.6
3.2
3.6
4.5
5.4
Grade
1.23
1.40
1.56
1.87
1.56
1.99
2.41
2.93
1.99
2.55
3.09
3.79
2.61
3.25
3.56
4.37
3.29
4.11
5.03
6.19
4.19
5.75
6.44
7.95
5.53
6.76
8.38
10.35
6.35
7.77
9.63
11.91
7.16
8.77
9.83
12.19
14.50
C250L0 C350L0
XL
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
Nom.
Mtre / Tonne
866
814
717
642
535
640
501
415
341
502
392
323
264
383
308
281
229
304
244
199
161
239
174
155
126
181
148
119
97
158
129
104
84
140
114
102
82
69
Lengths Lengths
/ Pack / MiniPak
91
127
127
127
127
91
91
91
91
61
61
61
61
61
61
61
61
37
37
37
37
37
37
37
37
19
19
19
19
19
19
19
19
19
19
19
19
19
61
61
61
61
37
37
37
37
37
37
37
37
37
37
37
37
19
19
19
19
19
19
19
19
10
10
10
10
10
10
10
10
10
10
10
10
10
9
1/09/11 3:20 PM
1.1.4 Circular Hollow Sections (CHS) - AS/NZs 1163 & As 1074 cont...
1
1.1.4 Circular Hollow Sections (CHS) - AS/NZS 1163 & AS 1074
11.76
16.61
17.89
11.99
13.95
19.74
21.27
NB
d0 Nom. Thick Class
AS1074
(mm)
(mm) (mm)
125
125
125
125
150
150
150
150
139.7
139.7
139.7
139.7
165.1
165.1
165.1
165.1
3.0
3.5
5.0
5.4
3.0
3.5
5.0
5.4
C250L0 C350L0
XL
L
M
H
XL
L
M
H
Nom.
Mtre / Tonne
99
85
60
56
83
72
51
47
Lengths Lengths /
/ Pack MiniPack
13
13
13
13
10
10
10
10
7
7
7
7
7
7
7
7
NOTE:
() Denotes tensile strength exceeds AS 1074 specification.
Non standard sizes, surface finishes and lengths available subject to enquiry. Minimum order
quantities (MOQs) apply.
C450L0 grade for some sizes available subject to enquiry. Minimum order quantities (MOQs)
apply.
NOPC & OILED available subject to enquiry.
Pipe to be used for low pressure water/gas reticulation are manufactured to meet AS 1074.
* Refer to Glossary of Terms
Nom. Thick
(mm)
Surface Finish
5.5
7.6
4.8
6.0
8.6
4.8
6.6
9.5
4.8
6.4
7.1
11.0
Nom. Linear
Mass (Kg/m)
12000mm Lengths Standard
11.31
15.24
12.96
16.02
22.42
16.16
21.92
30.88
19.35
25.55
28.22
42.67
PTD BLACK
Nom. Mtre/
Tonne
Lengths
/ Pack
88
66
77
62
45
62
46
32
52
39
35
23
19
19
10
10
10
13
13
13
7
7
7
1
10
18560 Orrcon National Product Brochure.indd 10
1/09/11 3:20 PM
1.1.5 Circular Hollow sections (CHS) - AS/NZs 1163 & API 5L cont...
d0
(mm)
Nom. Thick
(mm)
219.1
219.1
219.1
219.1
273.1
273.1
273.1
273.1
323.9
323.9
323.9
323.9
355.6
355.6
355.6
406.4
406.4
406.4
457.0
457.0
457.0
457.0
508.0
508.0
508.0
610.0
610.0
610.0
4.8
6.4
8.2
12.7
4.8
6.4
9.3
12.7
4.8
6.4
9.5
12.7
6.4
9.5
12.7
6.4
9.5
12.7
4.8
6.4
9.5
12.7
6.4
9.5
12.7
6.4
9.5
12.7
Surface Finish
Nom. Linear
Mass (Kg/m)
12000mm Lengths Standard
25.37
33.57
42.65
64.64
31.76
42.09
60.50
81.55
37.77
50.11
73.65
97.41
55.11
81.08
107.39
63.13
92.98
123.30
53.53
71.12
104.84
139.15
79.16
116.78
155.12
95.26
140.68
186.06
PTD BLACK
Nom. Mtre/
Tonne
Lengths
/ Pack
39
30
23
15
31
24
17
12
26
20
14
10
18
12
9
16
11
8
19
14
10
7
13
9
6
10
7
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NOTE:
Non standard sizes, surface finishes and lengths available subject to enquiry. Minimum order
quantities (MOQs) apply.
API bevel ends are standard.
Stock lengths are 12 metres.
Project supply subject to enquiry.
NOPC & OILED available subject to enquiry.
* Refer to Glossary of Terms
11
1/09/11 3:20 PM
Precision Tube
12
18560 Orrcon National Product Brochure.indd 12
1/09/11 3:20 PM
Gauge
1.2
1.6
0.9
1.0
1.2
1.6
0.9
1.2
1.4
1.6
2.0
2.5
1.2
1.6
0.9
1.2
1.4
1.6
1.2
1.4
1.5
1.6
2.0
2.5
1.2
1.4
1.6
1.2
1.5
1.6
1.2
1.6
2.0
Surface Finish
Nom. Linear
Mass (Kg/m)
SEMB
MSGB
MSBL
6100mm & 7320 Lengths Standard
0.404
0.506
0.410
0.451
0.529
0.672
0.495
0.642
0.734
0.822
0.987
1.169
0.679
0.873
0.586
0.762
0.875
0.983
0.883
1.015
1.080
1.144
1.389
1.671
0.868
0.998
1.124
1.056
1.297
1.375
1.124
1.465
1.791
13
1/09/11 3:20 PM
1
1.2.1 Precision Square Tube
Gauge
2.5
1.2
1.5
1.6
2.0
1.6
2.0
2.5
1.2
1.5
1.6
2.0
2.5
2.0
1.6
2.5
1.2
1.5
1.6
2.0
2.5
3.0
1.6
1.5
1.6
2.0
2.5
Surface Finish
Nom. Linear
Mass (Kg/m)
SEMB
MSGB
MSBL
6100mm & 7320 Lengths Standard
2.174
1.244
1.532
1.626
1.992
1.777
2.180
2.660
1.433
1.768
1.877
2.306
2.817
2.368
2.129
3.210
1.810
2.239
2.380
2.934
3.602
4.245
2.882
2.945
3.133
3.876
4.780
Lengths
Per Pack
64
49
49
49
49
49
49
49
32
32
32
32
32
36
36
36
25
25
25
25
25
25
12
16
16
16
16
NOTE:
Non standard lengths available subject to enquiry.
Other coatings available include - HTGB, HRSB, HRGB, HRPO, GALVANSIED*. These sections may
not be available in these coatings. Please contact Orrcon Steel for availability.
The products listed are indicative of the range but you need to check with the local branch for
availability & minimum order quantities (MOQs).
* Refer to Glossary of Terms
14
18560 Orrcon National Product Brochure.indd 14
1/09/11 3:20 PM
Gauge
12 x 9
25.4 x 12.7
25.4 x 12.7
25.4 x 12.7
25.4 x 12.7
30 x 15
31.8 x 12.7
35 x 19
35 x 19
35 x 19
35 x 19
38 x 25.4
38 x 25.4
38 x 25.4
50 x 10
50 x 10
50 x 10
50 x 20
50 x 20
50 x 25
50 x 25
50 x 25
50 x 25
50 x 25
50 x 40
51 x 31.8
51 x 31.8
57 x 35
57 x 35
57 x 35
60 x 30
60 x 40
60 x 40
63.5 x 38
63.5 x 38
1.2
0.9
1.0
1.2
1.6
0.9
1.6
1.0
1.2
1.6
2.0
1.2
1.5
1.6
0.9
1.2
1.6
1.6
2.0
0.9
1.2
1.6
2.0
2.5
1.6
1.6
2.0
1.6
2.0
2.5
2.5
1.6
3.0
1.6
2.0
Surface Finish
Nom. Linear
Mass (Kg/m)
SEMB
MSGB
MSBL
6100mm & 7320 Lengths Standard
0.395
0.497
0.547
0.643
0.825
0.594
0.986
0.796
0.943
1.224
1.489
1.120
1.377
1.460
0.806
1.056
1.375
1.626
1.992
1.018
1.339
1.752
2.149
2.621
2.129
1.948
2.393
2.179
2.682
3.288
3.210
2.380
4.245
2.418
2.981
15
1/09/11 3:20 PM
1
1.2.2 Precision Rectangular Tube
Gauge
67 x 29
70 x 34
70 x 50
75 x 25
76 x 38
76 x 38
76 x 38
80 x 40
80 x 40
90 x 40
2.0
2.3
1.2
2.0
1.2
1.6
2.0
1.6
2.5
2.5
Surface Finish
Nom. Linear
Mass (Kg/m)
SEMB
MSGB
MSBL
6100mm & 7320 Lengths Standard
2.808
3.482
2.186
2.934
2.073
2.732
3.373
2.882
4.387
4.780
Lengths
Per Pack
36
28
20
30
18
18
18
18
18
18
NOTE:
Non standard lengths available subject to enquiry.
Other coatings available include - HTGB, HRSB, HRGB, HRPO, GALVANSIED*. These sections may
not be available in these coatings. Please contact Orrcon Steel for availability.
The products listed are indicative of the range but you need to check with the local branch for
availability & minimum order quantities (MOQs).
* Refer to Glossary of Terms
16
18560 Orrcon National Product Brochure.indd 16
1/09/11 3:20 PM
Gauge
12.7
12.7
12.7
16.0
16.0
16.0
16.0
19.0
19.0
19.0
19.0
19.0
19.0
22.2
22.2
22.2
22.2
25.4
25.4
25.4
25.4
25.4
25.4
28.6
28.6
31.8
31.8
31.8
35.0
35.0
38.0
38.0
38.0
38.0
41.3
0.9
1.2
1.6
0.9
1.2
1.6
2.0
0.9
1.2
1.4
1.6
2.0
2.5
0.9
1.2
1.4
1.6
0.9
1.0
1.2
1.4
1.6
2.0
1.2
1.6
1.2
1.6
2.0
1.2
1.6
1.2
2.0
2.5
3.0
1.2
Surface Finish
SEMB
MSGB
MSBR
MSBL
ACMS
Nom. Linear
Mass (Kg/m)
Lengths
Per Pack
0.262
0.340
0.438
0.335
0.438
0.568
0.691
0.402
0.527
0.608
0.687
0.838
1.017
0.473
0.621
0.718
0.813
0.544
0.601
0.716
0.829
0.939
1.154
0.811
1.065
0.906
1.192
1.470
1.000
1.318
1.089
1.776
2.189
2.589
1.187
270
270
270
217
217
217
217
169
169
169
169
169
169
127
127
127
127
91
91
91
91
91
91
61
61
61
61
61
61
61
61
37
37
37
37
17
1/09/11 3:20 PM
1
1.2.3 Precision Round Tube
Gauge
1.6
1.2
1.6
2.0
2.5
1.2
1.6
2.0
1.2
1.4
1.6
2.0
2.5
1.2
1.6
1.2
1.6
2.0
1.6
1.6
2.0
1.6
1.6
2.0
1.6
1.6
Surface Finish
SEMB
MSGB
MSBR
MSBL
ACMS
Nom. Linear
Mass (Kg/m)
Lengths
Per Pack
1.566
1.281
1.693
2.097
2.589
1.373
1.815
2.249
1.474
1.712
1.949
2.417
2.990
1.562
2.068
1.651
2.186
2.713
2.316
2.442
3.033
2.698
2.944
3.660
3.290
3.488
37
68
68
37
37
37
19
19
19
53
19
19
19
19
19
19
19
19
19
19
19
19
19
19
7
7
NOTE:
Non standard lengths available subject to enquiry.
Other coatings available include - HTGB, HRSB, HRGB*. These sections may not be available in
these coatings. Please contact Orrcon Steel for availability.
The products listed are indicative of the range, however you need to check with the local branch
for availability and minimum order quantities (MOQs).
* Refer to Glossary of Terms
18
18560 Orrcon National Product Brochure.indd 18
1/09/11 3:20 PM
Surface Finish
Flat / Oval
Nom. Linear
Gauge
Side
Mass (Kg/m)
SEMB
MSGB
MSBR
6100mm & 7320 Lengths Standard
OV
2.0
1.152
FS
1.2
0.740
FS
1.6
0.998
OV
1.6
0.940
OV
2.0
1.196
OV
2.0
1.312
FS
1.6
1.237
FS
1.2
1.114
FS
1.6
1.476
OV
1.6
1.858
FS
1.0
1.334
NOTE:
Non standard lengths available subject to enquiry.
Other coatings available include - HTGB, HRSB, HRGB, HRPO, GALVANISED*. These sections may
not be available in these coatings. Please contact Orrcon Steel for availability
The products listed are indicative of the range, however you need to check with the local branch
for availability and minimum order quantities (MOQs).
* Refer to Glossary of Terms
Nom. Linear
Mass (Kg/m)
6100mm & 7320 Lengths Standard
1.941
2.470
2.907
2.006
Gauge
50.8 H/RAIL
50 x 50 30-25
50 x 50 30-25
50 x 50 x 68.6
1.6
1.6
2.0
1.6
SEMB
MSGB
Lengths
Per Pack
30
25
25
25
NOTE:
Non standard lengths available subject to enquiry.
Other coatings available include - HTGB, HRSB, HRGB, HRPO, GALVANISED*. These sections may
not be available in these coatings. Please contact Orrcon Steel for availability.
The products listed are indicative of the range but you need to check with the local branch for
availability and minimum order quantities (MOQs).
* Refer to Glossary of Terms
19
1/09/11 3:20 PM
Size dxb
(mm)
52 x 25
52 x 25
53 x 35
59 x 30
59 x 30
66 x 44
66 x 44
75 x 40
75 x 40
75 x 40
85 x 48
97 x 42
97 x 42
108 x 38
115 x 42
115 x 42
124 x 42
62 x 50
80 x 61
Surface Finish
Nom. Thick
Nom. Linear
Nom.
Mtre/Tonne
PTD
ALLGAL
(mm)
Mass (Kg/m)
Flat Sided Oval (Rail) 6100mm Lengths Standard
1.6
1.61
621
2.0
1.99
503
1.6
1.84
543
1.6
1.84
543
2.0
2.28
439
1.6
2.32
431
2.0
3.22
311
1.6
2.46
407
2.0
2.99
334
2.5
3.60
278
3.2
6.08
164
2.0
3.65
274
2.5
4.53
221
2.0
3.85
260
2.0
4.27
234
2.5
5.33
188
2.0
4.50
222
2.0
3.65
274
Lengths
/ Pack
MiniPack
48
48
48
48
48
25
25
20
20
32
28
21
21
21
21
21
21
25
25
NOTE:
Non standard sizes, surface finishes and lengths available, subject to enquiry.
Minimum order quantities (MOQs) apply.
Nom. Thick
(mm)
75 x 64
75 x 64
2.5
3.0
Surface Finish
Nom. Linear
Mass (Kg/m)
12000mm Lengths Standard
4.58
5.46
ALLGAL
Mtre/Tonne
Nom.
Lengths
/ Pack
218
183
24
24
MiniPack
NOTE:
Non standard surface finishes and lengths available, subject to enquiry.
Minimum order quantities (MOQs) apply.
20
18560 Orrcon National Product Brochure.indd 20
1/09/11 3:20 PM
Size
OD
(mm)
Class
15NB
20NB
20NB
20NB
20NB
20NB
25NB
25NB
25NB
25NB
25NB
32NB
32NB
32NB
32NB
32NB
40NB
40NB
40NB
40NB
40NB
40NB
40NB
50NB
50NB
50NB
50NB
50NB
65NB
65NB
65NB
65NB
21.3
26.9
26.9
26.9
26.9
26.9
33.7
33.7
33.7
33.7
33.7
42.4
42.4
42.4
42.4
42.4
48.3
48.3
48.3
48.3
48.3
48.3
48.3
60.3
60.3
60.3
60.3
60.3
76.1
76.1
76.1
76.1
M
XL
XL
L
M
H
XL
XL
L
M
H
XL
XL
L
M
H
XL
XL
L
L
M
M
H
XL
XL
L
M
H
XL
L
M
H
Nom
Lengths
kg/m
Thickness
/Bundle
6500mm Lengths Standard
2.6
91
1.20
2.0
91
1.23
2.0
91
1.23
2.3
91
1.40
2.6
91
1.56
3.2
91
1.87
2.0
91
1.56
2.0
91
1.56
2.6
91
1.99
3.2
91
2.41
4.0
91
2.93
2.0
61
1.99
2.0
61
1.99
2.6
61
2.55
3.2
61
3.09
4.0
61
3.79
2.3
61
2.61
2.3
61
2.61
2.9
61
3.25
2.9
61
3.25
3.2
61
3.56
3.2
61
3.56
4.0
61
4.37
2.3
37
3.29
2.3
37
3.29
2.9
37
4.10
3.6
37
5.03
4.5
37
6.19
2.3
37
4.18
3.2
37
5.75
3.6
37
6.43
4.5
37
7.94
Lengths
Mass
/Bundle
6500
6500
7200
6500
6500
6500
6500
7200
6500
6500
6500
6500
7200
6500
6500
6500
6500
7200
6500
7200
6500
7200
6500
6500
7200
6500
6500
6500
6500
6500
6500
6500
0.71
0.73
0.80
0.83
0.92
1.11
0.924
1.024
1.18
1.42
1.73
0.790
0.875
1.011
1.23
1.50
1.03
1.15
1.29
1.43
1.41
1.56
1.73
0.791
0.876
0.987
1.210
1.489
1.01
1.38
1.55
1.91
21
1/09/11 3:20 PM
1
1.5 Hot Dipped Galvanised Pipe
OD
(mm)
Class
80NB
80NB
80NB
80NB
90NB
90NB
90NB
90NB
100NB
100NB
100NB
100NB
125NB
125NB
125NB
125NB
150NB
150NB
150NB
150NB
88.9
88.9
88.9
88.9
101.6
101.6
101.6
101.6
114.3
114.3
114.3
114.3
139.7
139.7
139.7
139.7
165.1
165.1
165.1
165.1
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
XL
L
M
H
Nom
Lengths
kg/m
Thickness
/Bundle
6500mm Lengths Standard
2.6
19
5.53
3.2
19
6.76
4.0
19
8.37
5.0
19
10.34
2.6
19
6.34
3.2
19
7.76
4.0
19
9.62
5.0
19
11.91
3.2
19
8.76
3.6
19
9.82
4.5
19
12.18
5.4
19
14.50
3.0
13
10.11
3.5
13
11.75
5.0
13
16.60
5.4
13
17.88
3.0
10
11.99
3.5
10
13.94
5.0
10
19.73
5.4
10
21.26
Lengths
Mass
/Bundle
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
6500
0.683
0.835
1.034
1.277
0.784
0.959
1.188
1.470
1.08
1.21
1.50
1.79
0.854
0.993
1.403
1.511
0.779
0.906
1.283
1.382
NOTE:
Non standard lengths are available, subject to enquiry.
22
18560 Orrcon National Product Brochure.indd 22
1/09/11 3:20 PM
Structural
Hollow sections to be used for structural purposes are manufactured to meet:
AS/NZS 1163 - Structural Steel Hollow Sections (Grades C250, C350, C450, C250L0, C350L0, &
C450L0).
Coatings & SURFACE FINISHES
Electrogalvanized coating applied to ALLGAL hollow sections complies to the following standard:
AS 4750 - Electrogalvanized (zinc) coatings on ferrous hollow sections.
Current Surface finishes
SmartcoteTM - Painted blue/black water based acrylic primer.
ALLGALTM - Electro-galvanised internal and external surface coating.
ALLGALTMPCQ - Powder coat quality - no tube mark, oiled.
HOT DIPPED GALVANISED - Internal & external surface coating.
OILED - lightly oiled for short term corrosion protection.
NOPC - No oil, paint or coating.
Orrcon Steel products are manufactured by Cold Forming and Electric Resistance Welding (ERW) and
are tested to meet the following Australian Standards:
Grade*
AS1163
C250 / C250L0
C350 / C350L0
C450 / C450L0
CHS
RHS & SHS
Yield Strength Tensile Strength
MPa (min)
MPa (min)
<15 15-30 >30 <15 15-30 >30
250
320
18
20
22
14
16
18
350
430
16
18
20
12
14
16
450
500
12
14
16
10
12
14
23
1/09/11 3:20 PM
AS1163
Characteristic
External dimensions (d, b, d0)
Thickness (t)
d406.4mm
d>406.4mm
Mass
Dimensional Tolerances
Pipe (CHS)
Rectangular & Square (RHS / SHS)
1% with minimum of 0.5mm
1% with minimum of 0.5mm
& maximum 10%
10%
10%
10% with max of 2mm
All Sections
Not less than 96% of specified nominal mass
Corner
Radius
AS1163
Shape Tolerances
Characteristic
All Sections
1.5t to 3t
1.8t to 3t
2mm 0.5mm/m length
Max 0.8% or 0.5mm, whichever is greater
90 1
Pipe (CHS)
Rectangle & Square (RHS/SHS)
0.20% of total length
0.15% of total length
24
18560 Orrcon National Product Brochure.indd 24
1/09/11 3:20 PM
MiniPaks
Retain current stock level but increase stock range.
Easier to handle, store and transport.
Increase customer stock turns.
Reduced costs = increased profits.
Now available in pipe.
AS1450
Surface Finish
D/T Ratio
Commercial
Quality
& Aluminium
Coated
<15
15 to 25
<25 to 35
< 35
Zinc Coated
Yield
Tensile
Strength MPa Strength MPa
(min)
(min)
300
310
275
300
250
290
200
280
300
350
Elong on
5.65So%
(min)
15
20
25
30
15
D = Outside diameter or equivalent round | t = nominal wall thickness | So= Cross Sectional Area
25
1/09/11 3:20 PM
AS1450
Dimensional Tolerances
Characteristic
25mm
>25 and 50
>50 and 75
>75 and 100
Mass
Round
0.15mm
0.5mm
0.20mm
0.30mm
1%
0.40mm
Round, Rectangular & Square
10%
v
AS1450
Shape Tolerances
Characteristic
All Sections
Corner Radius
Twist (v)
Squareness
Straightness (a)
Max 3t
< 2mm + 0.5mm/m length
90 1
Shall not exceed: Mill Length(mm) / 600
Surface Finishes
Commercial Quality Erw Steel Tubing
Standard tubing is manufactured from a range of steel strip types including cold rolled and hot
rolled pickled and oiled. The strip has a matt finish, and after being polished in the tube rolling
process the resulting surface finish is suitable in most applications.
Tubing is coated with a non-tacky rust preventative that is designed to withstand corrosion for at
least three months when stored in normal, dry warehouse conditions. The tube can be welded
without removal of the rust preventative.
26
18560 Orrcon National Product Brochure.indd 26
1/09/11 3:20 PM
MSGB, HTGB, ACMS, Zinc And Aluminium Coated Erw Steel Tubing
Tubing is manufactured from a range of Zinc and Aluminium coated steel strip types which are
coated on both sides. The welded seam of the tube is recoated with a Zinc and Aluminium alloy to
replace the material that the welding process has burnt away. Zinc coated tube is coated with a
protective agent designed to withstand white rust when stored in normal, dry conditions. Aluminium
coated tube is supplied without this protective agent.
The performance of Zinc coated steel is influenced by micro-environments, which vary from site
to site. In corrosive environments it is recommended that a suitable barrier coating (eg paint or
powder coating) be applied over the Zinc surface. This application should be in accordance with
the suppliers recommendations with regard to surface pre-treatment, application, curing, and
maintenance of the coating - refer to AS/NZS 2312 Guide to the Protection of Iron Steel against
Exterior Atmospheric Corrosion.
Rust protection
Rust preventative oil should be re-applied periodically where prolonged storage is required.
27
1/09/11 3:20 PM
28
18560 Orrcon National Product Brochure.indd 28
1/09/11 3:20 PM
2
2.0 Hot Rolled Structural & Plate
29
1/09/11 3:20 PM
200 UB
2
2.2 Universal Beams
250 UB
310 UB
360 UB
410 UB
460 UB
530 UB
610 UB
Weight
(kg/m)
14.0
18.0
16.1
18.1
22.2
18.2
22.3
25.4
29.8
25.7
31.4
37.3
32.0
40.4
46.2
44.7
50.7
56.7
53.7
59.7
67.1
74.6
82.1
82.0
92.4
101.0
113.0
125.0
Metre/
Tonne
71
56
62
55
45
55
45
39
34
39
32
27
31
25
22
22
20
18
19
17
15
13
12
12
11
10
9
8
Depth of
Section
150
155
173
175
179
198
202
203
207
248
252
256
298
304
307
352
356
359
403
406
454
457
460
528
533
602
607
612
Flange (mm)
Width
Web (mm)
Thickness
75
75
90
90
90
99
133
133
134
124
146
146
149
165
166
171
171
172
178
178
190
190
191
209
209
228
228
229
7.0
9.5
7.0
8.0
10.0
7.0
7.0
7.8
9.6
8.0
8.6
10.9
8.0
10.2
11.8
9.7
11.5
13.0
10.9
12.8
12.7
14.5
16.0
13.2
15.6
14.8
17.3
19.6
Depth
Thickness
136
136
159
159
159
184
188
188
188
232
234
234
282
284
284
333
333
333
381
381
428
428
428
502
502
572
572
572
5.0
6.0
4.5
5.0
6.0
4.5
5.0
5.8
6.3
5.0
6.1
6.4
5.5
6.1
6.7
6.9
7.3
8.0
7.6
7.8
8.5
9.1
9.9
9.6
10.2
10.6
11.2
11.9
9.0m
10.5m
12m
13.5m
15m
16.5m
18m
150 UB
180 UB
200 UB
250 UB
310 UB
360 UB
30
18560 Orrcon National Product Brochure.indd 30
1/09/11 3:20 PM
9.0m
10.5m
12m
13.5m
15m
16.5m
18m
410 UB
460 UB
530 UB
610 UB
200 UC
250 UC
310 UC
Weight
(kg/m)
14.8
23.4
30.0
37.2
46.2
52.2
59.5
72.9
89.5
96.8
118.0
137.0
158.0
Metre/
Tonne
68
43
33
27
22
19
17
14
11
10
8
7
6
Depth of
Section
97
152
158
162
203
206
210
254
260
308
315
321
327
Flange (mm)
Width
Web (mm)
Thickness
99
152
153
154
203
204
205
254
256
305
307
309
311
7.0
6.8
9.4
11.5
11.0
12.5
14.2
14.2
17.3
15.4
18.7
21.7
25.0
Depth
Thickness
83
139
139
139
181
181
181
225
225
277
277
277
277
5.0
6.1
6.6
8.1
7.3
8.0
9.3
8.6
10.5
9.9
11.9
13.8
15.7
Size
Specification (mm)
100 UC
150 UC
9.0m
100 UC
150 UC
200 UC
250 UC
310 UC
10.5m
12m
13.5m
15m
16.5m
18m
31
1/09/11 3:20 PM
2
2.4 Parallel Flange Channels
50 x 25*
75 x 40
100 x 50
125 x 65
150 x 75
180 x 75
200 x 75
230 x 75
250 x 90
300 x 90
380 x 100
Metre/
Tonne
3.83
5.92
8.33
11.90
17.70
20.90
22.90
25.10
35.50
40.10
55.20
Flange (mm)
Web (mm)
Depth of
Section
width
Thickness
50
75
100
125
150
180
200
230
250
300
380
25
40
50
65
75
75
75
75
90
90
100
6.1
6.7
7.5
9.5
11.0
12.0
12.0
15.0
16.0
17.5
261.1
169.0
120.0
84.0
56.5
47.6
43.7
39.8
28.2
24.9
18.1
Depth/Fange
62.8
86.6
110.0
131.0
158.0
176.0
206.0
220.0
268.0
345.0
Thickness
3.8
4.2
4.7
6.0
6.0
6.0
6.5
8.0
8.0
10.0
9.0m
75 x 40
100 x 50
125 x 65
150 x 75
180 x 75
200 x 75
230 x 75
250 x 90
300 x 90
380 x 100
10.5m
12m
13.5m
15m
16.5m
18m
NOTE :
* Taper Flange Channel is available subject to enquiry
32
18560 Orrcon National Product Brochure.indd 32
1/09/11 3:20 PM
2.5 Angles
2.5.1 Angles - Equal Angles (ea)
Section: Equal Angles
Standard: AS/NZS 3679.1 - 300MPa
Surface Finish: Mill Finish
Nominal Size (mm)
20 x 20
25 x 25
30 x 30
45 x 45
50 x 50
55 x 55
65 x 65
75 x 75
90 x 90
100 x 100
Weight / Metre
(kg/m)
0.92
1.12
1.65
2.08
1.35
2.01
2.56
1.83
2.73
3.50
2.06
3.10
3.97
2.31
3.48
4.46
5.68
3.84
4.93
4.56
5.87
7.51
9.02
5.27
6.81
8.73
10.50
8.22
10.60
12.70
9.16
11.80
14.20
17.70
Metres / Tonne
(m/t)
1087
893
606
481
741
498
391
546
366
286
485
323
252
433
287
224
176
260
203
219
170
133
111
190
147
115
95
122
94
79
109
85
70
57
2
2.5.1 Angles - Equal Angles
40 x 40
Nominal Thickness
(mm)
3
3
5
6
3
5
6
3
5
6
3
5
6
3
5
6
8
5
6
5
6
8
10
5
6
8
10
6
8
10
6
8
10
12
33
1/09/11 3:20 PM
150 x 150
2
2.5.1 Angles - Equal Angles
200 x 200
Weight / Metre
(kg/m)
14.90
18.00
22.50
29.10
21.90
27.30
35.40
42.10
40.00
48.70
54.40
60.10
76.80
Metres / Tonne
(m/t)
67
56
44
34
46
37
28
24
25
21
18
17
13
6m
7.5m
20 x 20
25 x 25
30 x 30
40 x 40
45 x 45
50 x 50
55 x 55
65 x 65
75 x 75
90 x 90
100 x 100
125 x 125
150 x 150
200 x 200
9m
12m
NOTE :
Minimum order quantities (MOQs) will apply for non standard lengths.
34
18560 Orrcon National Product Brochure.indd 34
1/09/11 3:20 PM
65 x 50
75 x 50
100 x 75
125 x 75
150 x 90
150 x 100
Weight / Metre
(kg/m)
4.02
5.16
6.59
4.40
5.66
7.23
7.98
10.30
12.40
9.16
11.80
14.20
17.70
14.30
17.30
21.60
27.90
18.00
22.50
Metres / Tonne
(m/t)
249
149
152
228
176
138
125
97
81
109
85
70
57
70
58
46
36
56
44
2
2.5.2 Angles - Unequal Angles
Nominal Thickness
(mm)
5
6
8
5
6
8
6
8
10
6
8
10
12
8
10
12
16
10
12
9m
12m
NOTE :
Minimum order quantities (MOQs) will apply for non standard lengths.
35
1/09/11 3:20 PM
2
2.6.1 Merchant Bar - Rounds
6
8
10
12
14
16
18
20
22
24
27
30
33
36
39
Weight / Metre
(kg/m)
0.23
0.41
0.63
0.91
1.24
1.61
2.04
2.52
3.05
3.64
4.61
5.69
6.88
8.19
9.61
Metres / Tonne
(m/t)
4348
2439
1587
1099
806
621
490
397
327
275
217
176
145
122
104
NOTE :
Length range available - 6 metres.
Non standard lengths available subject to enquiry
Weight / Metre
(kg/m)
0.81
1.16
2.06
3.22
5.03
8.24
12.87
Metres / Tonne
(m/t)
1235
862
485
311
199
121
78
NOTE :
Length range available - 6 metres.
Non standard lengths available subject to enquiry
36
18560 Orrcon National Product Brochure.indd 36
1/09/11 3:20 PM
NOTE :
Length range available - 6 metres.
Non standard lengths available subject to enquiry
Metres / Tonne
(m/t)
4000
3226
1887
1786
2778
1667
971
2083
1250
1042
621
1667
990
826
621
500
415
1299
775
649
485
389
324
1031
621
518
389
311
259
194
155
2
2.6.3 Merchant Bar - Flats
10 x 3
13 x 3
13 x 5
13 x 6
16 x 3
16 x 5
16 x 8
20 x 3
20 x 5
20 x 6
20 x 10
25 x 3
25 x 5
25 x 6
25 x 8
25 x 10
25 x 12
32 x 3
32 x 5
32 x 6
32 x 8
32 x 10
32 x 12
40 x 3
40 x 5
40 x 6
40 x 8
40 x 10
40 x 12
40 x 16
40 x 20
Weight / Metre
(kg/m)
0.25
0.31
0.53
0.56
0.36
0.60
1.03
0.48
0.80
0.96
1.61
0.60
1.01
1.21
1.61
2.00
2.41
0.77
1.29
1.54
2.06
2.57
3.09
0.97
1.61
1.93
2.57
3.22
3.86
5.15
6.44
37
1/09/11 3:20 PM
2
2.6.3 Merchant Bar - Flats
50 x 3
50 x 5
50 x 6
50 x 8
50 x 10
50 x 12
50 x 16
50 x 20
50 x 25
65 x 3
65 x 5
65 x 6
65 x 8
65 x 10
65 x 12
65 x 16
65 x 20
65 x 25
75 x 5
75 x 6
75 x 8
75 x 10
75 x 12
75 x 16
75 x 20
75 x 25
75 x 40
90 x 6
90 x 8
90 x 10
90 x 12
100 x 5
100 x 6
100 x 8
100 x 10
Weight / Metre
(kg/m)
1.21
2.01
2.42
3.22
4.02
4.83
6.44
8.05
10.06
1.57
2.62
3.14
4.18
5.23
6.28
8.37
10.46
13.08
3.02
3.62
4.83
6.03
7.24
9.66
12.07
15.09
24.14
4.35
5.79
7.24
8.69
4.03
4.83
6.44
8.05
Metres / Tonne
(m/t)
826
498
413
311
249
207
155
124
99
637
382
318
239
191
159
119
96
76
331
276
207
166
138
104
83
66
41
230
173
138
115
248
207
155
124
Table continues over page
38
18560 Orrcon National Product Brochure.indd 38
1/09/11 3:20 PM
Metres / Tonne
(m/t)
104
77
62
50
226
188
141
113
94
191
159
120
96
80
60
48
38
166
138
104
83
69
52
41
33
17
138
115
86
69
58
43
35
28
2
2.6.3 Merchant Bar - Flats
100 x 12
100 x 16
100 x 20
100 x 25
110 x 5
110 x 6
110 x 8
110 x 10
110 x 12
130 x 5
130 x 6
130 x 8
130 x 10
130 x 12
130 x 16
130 x 20
130 x 25
150 x 5
150 x 6
150 x 8
150 x 10
150 x 12
150 x 16
150 x 20
150 x 25
150 x 50
180 x 5
180 x 6
180 x 8
180 x 10
180 x 12
180 x 16
180 x 20
180 x 25
Weight / Metre
(kg/m)
9.66
12.92
16.10
20.12
4.42
5.31
7.08
8.85
10.62
5.23
6.28
8.37
10.46
12.55
16.74
20.92
26.15
6.03
7.24
9.66
12.10
14.48
19.31
24.14
30.17
60.34
7.25
8.69
11.57
14.48
17.38
23.18
28.97
36.21
39
1/09/11 3:20 PM
2
2.6.3 Merchant Bar - Flats
Metres / Tonne
(m/t)
104
78
62
52
39
31
25
83
50
41
31
25
20
69
41
35
26
21
17
NOTE :
Length range available - 6 metres.
Non standard lengths available subject to enquiry
2.7 Plate
2.7.1 Plain Plate
Section: Plain Plate
Standard: AS/NZS 3678 - 250 & 350MPa
Surface Finish: Mill Finish
Plate Thickness (mm)
3
4
5
6
8
23.55
31.40
39.25
47.10
62.80
40
18560 Orrcon National Product Brochure.indd 40
1/09/11 3:20 PM
10
12
16
20
22
25
28
32
36
40
45
50
55
60
65
70
75
80
90
100
78.50
94.20
125.60
157.00
172.70
196.25
219.80
251.20
282.60
314.00
353.25
392.50
431.75
471.00
510.00
549.50
588.75
628.00
706.50
785.00
2
2.7.1 Plain Plate
2.1
3.0
4.0
5.0
6.0
18.49
25.55
33.40
41.25
49.10
41
1/09/11 3:20 PM
Cold Rolled
Sheet Size
mm x mm
0.40
1800 x 1200
0.40
2400 x 1200
99.57
0.55
1800 x 1200
100.48
102.38
100.20
0.55
2400 x 1200
75.36
76.78
75.16
0.75
1800 x 1200
74.95
75.67
0.75
2400 x 1200
56.21
56.75
0.95
1800 x 1200
59.76
61.01
0.95
2400 x 1200
44.82
45.76
1.15
1800 x 1200
49.69
50.55
1.15
2400 x 1200
37.27
37.91
132.76
1.15
2400 x 1500
1.60
1.55
1800 x 1200
38.86
37.16
30.77
37.65
1.60
1.55
2400 x 1200
27.64
27.87
28.33
1.60
1.55
3000 x 1200
22.12
22.30
22.59
1.55
3000 x 1500
2.00
1.95
1800 x 1200
29.49
29.68
29.99
2.00
1.95
2400 x 1200
22.12
22.26
22.49
2.00
1.95
3000 x 1200
17.69
17.81
17.99
2.50
2.45
1800 x 1200
23.59
23.80
2.50
2.45
2400 x 1200
17.69
17.85
2.50
2.45
3000 x 1200
14.15
14.28
3.00
2.95
1800 x 1200
19.66
19.75
3.00
2.95
2400 x 1200
14.74
14.82
3.00
2.95
3000 x 1200
11.80
18.26
NOTE
Galvabond, Zincanneal, Zincalume, Colorbond are all registered trade names of
Bluescope Steel.
42
18560 Orrcon National Product Brochure.indd 42
1/09/11 3:20 PM
Building Products
43
1/09/11 3:20 PM
Maximum Recommended
Width of
Minimum
Spacing of Supports for Roof
Depth of
BMT* Mass
Coverage
Roof Pitch
Spans in Normal conditions (mm)
Rib (mm)
(mm) (kg/m2)
(mm)
(deg / mm)
Single
End
Internal
0.42
4.74
700
0.48
5.37
0.42
4.42
680
0.48
5.05
0.42
4.42
762
0.48
4.96
0.42
4.48
700
3
3.1.1 Roofing Profiles
0.48
0.42
4.42
16mm high
corrugated rib
fixed profile
0.48
4.96
0.6
6.29
0.55
7.62
0.7
48
28
24
16
2500
2350
2800
2800
3400
1000
1300
1700
1500
1700
2300
1300
1800
2400
2000
2200
3000
2 (1 in 30)
3 (1 in 20)
5 (1 in 12)
17
48
1950
1 (1 in 60)
16
762
1 (1 in 60)
5.38
305
48mm high clip
fixed profile
42
700
900
1200
700
1200
1600
600
900
1200
1800
1800
2000
2200
2200
2500
1 (1 in 60)
9.53
NOTE:
The above span information is to be used as a guide only. Spans have been based on a **regional
wind speed for Region A location (non cyclonic) as per AS1170.2.
Different manufacturers sheet profiles may differ in dimensions and name.
Minimum roof pitch is dependent on the length of the roof.
Contact your Orrcon Steel representative for availability of roofing and cladding in various
regions.
* BMT Refers to Base Metal Thickness
**Regional Wind Speeds
Region A - Non cyclonic
Region B - Non cyclonic but higher wind speeds than Region A
Region C - Cyclonic
Region D - Cyclonic, but higher wind speeds than Region C
44
18560 Orrcon National Product Brochure.indd 44
1/09/11 3:20 PM
BMT
(mm)
0.42
16mm high
corrugated rib fixed
profile
Mass
(kg/m2)
Width of
Coverage
(mm)
Depth of
Rib (mm)
700
42
5.37
0.35
0.42
0.48
0.6
3.68
4.42
4.96
6.29
0.42
4.48
762
16
16
16
17
700
24
End
Internal
2400
3300
2800
3600
1200
1350
1800
-
1600
1800
2400
-
1800
1800
2400
0.48
5.38
2600
2200
3000
0.35
3.68
1200
1600
0.42
4.42
0.48
4.96
0.35
3.43
762
817
12mm high rib
fixed profile
Single
4.74
0.48
4.11
0.42
4.07
1800
1800
2200
1950
2050
2800
1800
2700
1900
2800
600
600
12
850
600
1200
1200
1200
810
1350
1350
1350
1000
1000
1000
1900
2800
265mm wide
weatherboard
profile
0.42
4.15
0.48
4.65
0.6
5.91
0.42
4.15
265
NOTE:
The above span information is to be used as a guide only. Spans have been based on a regional
wind speed for **Region A location as per AS1170.2.
0.42
28
45
1/09/11 3:20 PM
Gauge (BMT*)
22
0.42
6100mm
38
0.55
6100mm
0.48
40
0.55
6100mm
0.75
50
64
0.75
0.75
0.95
7500mm
7500mm
75
0.75
7500mm
96
0.95
7500mm
120
0.95
7500mm
NOTE:
*BMT refers to Base Metal Thickness
Contact your Orrcon Steel representative for availability of roof battens in various regions.
46
18560 Orrcon National Product Brochure.indd 46
1/09/11 3:20 PM
3.1.4 purlins
C Purlins & Girts
Description
Web
(mm)
Flange
(mm)
Lip
(mm)
Thickness
(mm)
Weight/Linear Metre
(kg/m)
76
44
13.0
1.0
1.32
C75-12
76
44
13.0
1.2
1.65
C75-15
76
45
14.0
1.5
2.10
C100-10
102
51
12.5
1.0
1.78
C100-12
102
51
12.5
1.2
2.10
C100-15
102
51
13.5
1.5
2.62
C100-19
102
51
14.5
1.9
3.29
C100-24
102
51
14.5
2.4
3.84
C150-12
152
64
14.5
1.2
2.84
C150-15
152
64
15.5
1.5
3.53
C150-19
152
64
16.5
1.9
4.45
C150-24
152
64
18.5
2.4
5.57
C200-15
203
76
15.5
1.5
4.39
C200-19
203
76
19.0
1.9
5.73
C200-24
203
76
21.0
2.4
7.10
C250-19
254
76
18.5
1.9
6.27
C250-24
254
76
20.5
2.4
7.87
C300-24
300
96
27.5
2.4
10.09
C300-30
300
96
31.5
3.0
12.76
C350-24
350
125
30.0
2.4
11.96
C350-30
350
125
30.0
3.0
14.99
C400-19
400
96
34.0
1.9
10.22
C400-24
400
96
34.0
2.4
12.91
C400-30
400
96
34.0
3.0
14.99
3
3.1.4 Purlins
C75-10
NOTE:
Stock lengths are available for selected sizes.
Purlins & girts are made from high tensile steel and are to be fastened rather than welded.
Use the bridging system from the relevant manufacturer to match their purlin and girt products.
Contact your Orrcon Steel representative for availability of purlins and girt sizes in various
regions.
47
1/09/11 3:20 PM
3.1.4 purlins
z Purlins & Girts
Description
Web
(mm)
Flange
(mm)
Lip
(mm)
Thickness
(mm)
Weight/Linear Metre
(kg/m)
Z100-10
102
53
14
1.0
1.78
Z100-12
102
53
14
1.2
2.10
Z100-15
102
53
15
1.5
2.62
Z100-19
102
53
15
1.9
3.29
Z100-24
102
53
15
2.4
3.84
Z150-12
152
65
19
1.2
2.84
Z150-15
152
65
19
1.5
3.53
Z150-19
152
65
19
1.9
4.45
Z150-24
152
65
20
2.4
5.57
Z200-15
203
79
17
1.5
4.39
Z200-19
203
79
20
1.9
5.73
Z200-24
203
79
21
2.4
7.10
Z250-19
254
79
18
1.9
6.27
Z250-24
254
79
21
2.4
7.87
Z300-24
300
100
27
2.4
10.09
Z300-30
300
100
31
3.0
12.76
3.1.4 Purlins
Z350-24
350
129
32
2.4
11.96
Z350-30
350
129
30
3.0
14.99
Z400-19
400
129
32
1.9
10.22
Z400-24
400
129
32
2.4
12.91
Z400-30
400
129
32
3.0
14.99
Z400-32
400
129
32
3.2
17.21
NOTE:
Stock lengths are available for selected sizes.
Purlins & girts are made from high tensile steel and are to be fastened rather than welded.
Use the bridging system from the relevant manufacturer to match their purlin and girt products.
Contact your Orrcon Steel representative for availability of purlins and girt sizes in various
regions.
48
18560 Orrcon National Product Brochure.indd 48
1/09/11 3:20 PM
3.1.4 purlins
Purlin & Girt Accessories
Cat No.
100BUP
90
40
150BUP
140
60
200BUP
190
110
250BUP
240
160
100GPB
90
40
150GPB
140
60
200GPB
190
110
250GPB
240
160
100GPBLL
66
115
30
60
60
150GPBLL
105
125
30
67
60
200GPBLL
154
136
36
73
110
250GPBLL
200
136
36
73
160
Metal Thickness
(BMT)
3mm
GPB Series
BUP Series
GPBLL Series
A
B
E
70
70
B
35
35 C
70
B
All holes 18 x 30
35
3.1.4 Purlins
70
49
1/09/11 3:20 PM
Gutter Accessories
115 O.G
Mitres
115 Quad
Stop Ends
125 D Gutter
Support Brackets
Leaf Guards
Hi Front Quad
150 Halfline
150 Half Round
Fascia Gutter
Flat Fascia
Fascia Cover
Profiles
Straps
Elbows
NOTE:
Different manufacturers gutter profiles are available but will differ in dimensions and name.
More rainwater products available to order
3.1.6 accessories
Fasteners
Profiles
Fastener Type
Unit
100 Pack
100 Pack
100 Pack
100 Pack
100 Pack
50
18560 Orrcon National Product Brochure.indd 50
1/09/11 3:20 PM
Components
Colour Range
3 x fence sheets
2 x posts
16mm high corrugated rib
fixed profile
2 x rails
Colorbond
Colour range
Product
Star Picket
Details
450mm Black Ptd
600mm Black Ptd
900mm Black Ptd
1350mm Black Ptd
1650mm Black Ptd
1800mm Black Ptd
2400mm Black Ptd
1600mm Galvanised
1800mm Galvanised
51
1/09/11 3:20 PM
3
3.2.2 General Fencing & Wire Mesh
Product
Details
Chain Wire
Barbed Wire
Wire Netting
Ranging from
13 x 0.56mm to 50 x 1mm Roll
widths from 0.9 to 1.8m.
Fence Wire
Tie Wire
Post Caps
Fence Joints
& Fittings
Gates
Gate Fittings
Fencing Accessories
52
18560 Orrcon National Product Brochure.indd 52
1/09/11 3:20 PM
Product
Details
Rural Mesh
W Strap
Netting Clips
NOTE:
For further information and detailed product specifications on the Fencing & Wire products
available, refer to the Orrcon Steel Building & Accessories Product Catalogue.
Unit
Ea
Ea
Ea
Ea
Ea
Ea
Unit
Ea
Ea
Ea
53
1/09/11 3:20 PM
Unit
Ea
Ea
Ea
Ea
Metre
N12
0.923
1083
N16
1.642
609
N20
2.470
390
NOTE:
Available in 6, 9 & 12m lengths subject to minimum order quantities (MOQs).
S Grade bar for swimming pools is available upon request. Subject to minimum order quantities
(MOQs).
Standard Unit
SL81
Sheet
6.0 x 2.4
105
SL52
SL52H
SL62
SL62H
SL72
SL72H
Sheet
6.0 x 2.4
11
Half Sheet
6.0 x 2.4
21
Sheet
6.0 x 2.4
33
Half Sheet
6.0 x 2.4
16
Sheet
6.0 x 2.4
40
Half Sheet
6.0 x 2.4
20
SL82
Sheet
6.0 x 2.4
52
SL92
Sheet
6.0 x 2.4
65
SL102
Sheet
6.0 x 2.4
80
RL718
Sheet
6.0 x 2.4
68
RL818
Sheet
6.0 x 2.4
79
54
18560 Orrcon National Product Brochure.indd 54
1/09/11 3:20 PM
Standard Unit
RL918
Sheet
6.0 x 2.4
RL1018
Sheet
6.0 x 2.4
109
RL1118
Sheet
6.0 x 2.4
131
RL1218
Sheet
6.0 x 2.4
157
NOTE:
Product Designation example - RL718
R (Rectangular), L (Class L - low carbon), 7 (long wire nominal diameter ), 1 (100mm long wire
pitch spacing).
8 (cross wire nominal diameter). Cross wire pitch spacing is always 200mm for rectangular
mesh.
Product Designation example - SL82
S (Square), L (Class L - low carbon), 8 (long & cross wire nominal diameter ), 2 (200mm long &
cross wire pitch spacing) H - this defines a half sheet.
Width (m)
6.0
0.2
6.0
0.2
13
6.0
0.3
6.0
0.3
18
6.0
0.4
11
6.0
0.4
22
3
3.4 Reinforcing Products
Description
Length (m)
Width (m)
25 x 25 x 2.5mm
1.8
1.2
25 x 25 x 2.5mm
2.0
1.2
25 x 25 x 2.5mm
2.4
1.2
25 x 25 x 2.5mm
3.0
2.4
23
Table continues over page
55
1/09/11 3:20 PM
Description
Length (m)
Width (m)
50 x 25 x 2.5mm
2.0
1.2
50 x 25 x 3.15mm
2.0
1.2
50 x 25 x 3.15mm
3.0
2.4
27
50 x 50 x 3.15mm
2.4
1.2
11
50 x 50 x 3.5mm
2.4
1.2
12
50 x 50 x4 .0mm
2.0
1.2
10
50 x 50 x 4.0mm
2.4
1.2
12
50 x 50 x 4.0mm
3.0
2.4
29
75 x 50 x 2.5mm
1.8
2.0
75 x 50 x 3.0mm
2.4
1.2
75 x 50 x 3.5mm
2.4
1.2
10
75 x 50 x 4.0mm
2.0
1.2
75 x 50 x 4.0mm
2.4
1.2
10
75 x 50 x 4.0mm
3.0
2.4
24
75 x 50 x 5.0mm
3.0
2.4
38
2.0
1.2
2.4
1.2
3.0
2.4
19
Reinforcing accessories
Description
Unit
Ea
Ea
95m
Ea
56
18560 Orrcon National Product Brochure.indd 56
1/09/11 3:20 PM
Unit
20kg
20kg
Cutting Disc
Description
Unit
Ea
Ea
Ea
Unit
5kg Pack
2.5kg Pack
2.5kg Pack
Details
Masks
Gloves
Unit
400g
20L
Profiles
57
1/09/11 3:20 PM
Product
Details
General purpose
brackets & base
plates
Safety accessories
Load restraints
Trade tools
3
3.6 Building Accessories & Tools
NOTE:
For further information and detailed product specifications on the range of building accessories
& tools available, refer to the Orrcon Steel Building & Accessories Product Catalogue.
58
18560 Orrcon National Product Brochure.indd 58
1/09/11 3:20 PM
General Information
59
1/09/11 3:20 PM
Test Certificates (TCs) and Letters of Compliance (LOCs) are available for customers and end-users
of Orrcon Steel manufactured products on request. LOCs list details of the products supplied and
may also provide indicative properties. LOCs are issued on an Orrcon Steel letterhead and are signed
by a responsible officer. TCs detail standard and grade specification details along with the results
of chemical, mechanical and physical property analysis conducted on representative samples from
the supplied batch of product. They provide sufficient product identification and technical detail to
enable independent verification of batch compliance to the relevant standard. These documents are
developed in full compliance with the appropriate standard and are generated as email ready Adobe
PDF documents.
If requirements for the supply of TC or LOC documents are not specified at the point of order it is
the customers responsibility to provide suitable product traceability details as requested by Orrcon
Steel (such as pack numbers, tube marking and heat or coil numbers). Orrcon Steel cannot be held
responsible for product traceability once it has been delivered to a customers site. Orrcon Steel
utilise NATA accredited laboratories to determine the chemistry and mechanical properties of its
manufactured product range. NATA is an ILAC (MRA) signatory and the relevant details for the test
laboratories are noted on test certificates.
60
18560 Orrcon National Product Brochure.indd 60
1/09/11 3:20 PM
Appearance: Precision
Melting Point
61
1/09/11 3:20 PM
Effects OfOver-Exposure
The major exposure hazard is the inhalation of fumes or dust. Chronic inhalation of high concentration
Iron Oxide fumes or dusts may lead to Benign Pneumoconiosis (Siderosis). Inhalation of high
concentration of Ferric Oxide may increase the risk of lung cancer in persons exposed to pulmonary
carcinogens.
Welding
The following consumables are recommended by AS 1544.1 when welding welded tube sections:
- Manual metal-arc (MMAW) E41XX, E48XX
- Gas metal-arc (MIG) (GMAW) W50x
Welding ALLGAL is similar to welding painted tube & pipe. For further information on ALLGAL
consumables please contact Orrcon Steel.
First Aid
Swallowed:
Eye:
Not applicable
Holding eyelids open, flood with water for at least 15 minutes. Seek medical
attention urgently.
Skin:
For lacerations, clean and dress wound. Apply pressure bandage and elevate
injured area. Obtain medical aid urgently. For burns, apply copious quantities of
cool water. Do not apply creams. Seek medical attention urgently.
Inhaled:
Remove from contaminated air. Maintain breathing with artificial respiration if
necessary. Seek medical attention urgently.
Advice to Doctor: Refer to section on inhalation hazards for welding operations involving Zinc coated
steel.
For a safety sheet and further information please contact Orrcon Steel.
62
18560 Orrcon National Product Brochure.indd 62
1/09/11 3:20 PM
MSBR Mild Steel Bright Tube has a bright finish and is typically used in the manufacture
of products that require a higher grade surface finish such as
electroplating or similar critical finish applications. Typical applications
domestic & commercial furniture, chrome plated lawn mower handles
etc. This material is seldom used given cost and low demand.
SEMB Semi Bright
Tube has typical steel grey appearance and has a suitable surface
for general applications. Ideal where demanding and consistent
properties are required. Typical applications - domestic and
commercial furniture, exhaust systems, shelving etc.
HRSB
Hot Rolled Semi Bright
Tube has typical steel grey appearance, surface is suitable for general
applications and is ideal for paint or powder coated processes.
Typical applications racking, shelving, fitness equipment, cargo
barriers etc.
Tube has a black, mill finish. Typical applications ideal for hot
dipped galvanised applications such as signs or fence posts.
ACMS
(Aluminium Coated
Mild Steel)
Tube rolled from hot dipped Aluminium coated steel strip, with
Aluminium coating both sides. Typical applications - heat resistant
applications eg. automotive exhausts, domestic gas heaters.
MSGB
(Mild Steel Galvabond)
Tube rolled from hot dipped Zinc coated steel strip, with Zinc coating
both sides. Typical applications exterior use such as tubular
fencing, outdoor furniture and promotional signage.
NOPC
63
1/09/11 3:20 PM
HTGB
(Hi Tensile Galvabond)
High strength tube rolled from hot dipped Zinc coated steel strip,
with Zinc coating both sides. Typical applications - outdoor tubular
products where greater strength and reduced weight is required.
ERW
C350L0
The term used to designate tube and pipe yield stress. The C means
cold formed, 350 is the yield strength of 350MPa, L is the guaranteed
impact properties, 0 is the low temperature impact test at 0 degrees.
This is used to define the notch toughness and its suitability to
brittle behavior. It complies with AS/NZS1163.
C250L0
C450L0
Pickled Steel
Assembly &
Shaft Drawings
Band Saw
Beam Line
Bearing Plate
Brand names for wear plate. A high strength, wear resistant, and
armour grade steel plate. It is a quench and tempered plate.
Boring
64
18560 Orrcon National Product Brochure.indd 64
1/09/11 3:20 PM
Checker/floor Plate
Coping
GussET
Haunch
Hot Rolled
Fast Cam
Fittings
The term also used to describe cleats and items that are welded onto
beams and columns.
Laser Cutting
PFC
Plasma Cutting
Plate Profile
Cutting Bed
A platform used to support the plate material whilst cutting with the
oxy, plasma, or laser cutting machine.
Merchant Bar
A steel section that is hot rolled from a billet into a round, square,
hexagonal or other shape.
Broaching
65
1/09/11 3:20 PM
Scale
Layers of iron oxide formed on the surface of hot steel when oxygen
from the atmosphere combines with iron from the steel. Also
referred to as Mill Scale.
Shop Drawings
UA
UB
UC
Ultimate Tensile
Strength
Web Stiffener
Yield Point
300MPa Yield
The yield stress grade is 300 MPa. The tensile strength is a minimum
of 440 MPa.
DISCLAIMER
The information and advice contained in this document is of a general nature only. You should always obtain
specialist advice to ensure that the materials, approach and techniques referred to in this document meet your
specific requirements. Orrcon Operations Pty Ltd disclaims all liability and responsibility for any loss or damage,
direct or indirect, which may be suffered by any person acting in reliance on anything contained in or omitted from
this document.
66
18560 Orrcon National Product Brochure.indd 66
1/09/11 3:21 PM
67
1/09/11 3:21 PM
Weight
(kg/mtr)
150
14.0
150
18.0
180
Depth
(mm)
Weight
(kg/mtr)
Blue
100
14.8
Purple
150
23.4
16.1
Blue
150
30.0
Purple
10.0
Yellow
180
18.1
Purple
150
37.2
Red
12.0
Pink
180
22.2
Red
200
46.2
Blue
14.0
Orange
200
18.2
White
200
52.2
Purple
16.0
Grey
200
22.3
Blue
200
59.5
Red
Purple
200
25.4
Purple
250
72.9
18.0
Blue
200
29.8
250
89.5
Green
Red
Purple
20.0
250
25.7
Blue
310
96.8
White
24.0
Pink
250
31.4
Purple
310
118.0
Blue
27.0
Blue
250
37.3
Red
310
137.0
Purple
310
32.0
Blue
310
158.0
Red
310
40.4
Purple
310
46.2
Red
360
44.7
Blue
360
50.7
Purple
360
56.7
Red
410
53.7
Blue
Colour
Diameter
(mm)
Colour
Blue
6.0
White
Blue
8.0
Red
Colour
75 x 40
410
59.7
Purple
100 x 50
460
67.1
Blue
125 x 65
460
74.6
Purple
150 x 75
460
82.1
Red
180 x 75
Colour
Blue
Purple
Red
30.0
Yellow
33.0
Grey
36.0
Red
39.0
Orange
Square Bar
Thickness
(mm)
Colour
10.0
Yellow
Blue
12.0
Pink
Purple
16.0
Grey
Green
530
82.0
Blue
200 x 75
Red
20.0
530
92.4
Purple
230 x 75
White
25.0
Purple
610
101.0
Blue
250 x 90
Orange
32.0
Orange
610
113.0
Purple
300 x 90
Yellow
40.0
Yellow
610
125.0
380 x 100
White
50.0
Green
Red
68
18560 Orrcon National Product Brochure.indd 68
1/09/11 3:21 PM
Colour
Colour
Grey
2.0
Yellow
0.75
Green
3.0
Blue
0.95
Orange
4.0
Green
1.20
White
5.0
Orange
1.60
Purple
6.0
White
2.00
Yellow
8.0
Red
2.10
Grey
10.0
Yellow
2.40
Pink
12.0
Pink
3.0
Blue
14.0
Orange
4.0
Green
16.0
Grey
5.0
Orange
20.0
Green
6.0
White
25.0
Purple
8.0
Red
10.0
Yellow
12.0
Pink
16.0
Grey
20.0
Green
25.0
Purple
28.0
Blue
32.0
Orange
36.0
Red
40.0
Yellow
45.0
Grey
50.0
Green
0.55
NOTE:
Not all products are available at all locations. Please contact your local Orrcon Steel branch for
availability of products.
350 Grade plate is identified with a red mark on the product.
69
1/09/11 3:21 PM
Size
(mm)
20x20
25x25
30x30
35x35
40x40
50x50
65x65
25x25
30x30
35x35
40x40
50x50
65x65
75x75
89x89
100x100
25x25
30x30
35x35
40x40
50x50
65x65
75x75
89x89
100x100
25x25
30x30
35x35
40x40
50x50
65x65
75x75
100x100
75x75
89x89
40x40
50x50
65x65
75x75
100x100
125x125
50x50
65x65
75x75
Thickness
(mm)
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
Rectangular (RHS)
Square (SHS)
Square (SHS)
Colour
Purple
Purple
Purple
Purple
Purple
Purple
Purple
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Grey
Grey
Green
Green
Green
Green
Green
Green
Orange
Orange
Orange
Size
(mm)
89x89
100x100
125x125
150x150
200x200
50x50
65x65
75x75
89x89
100x100
125x125
150x150
200x200
250x250
300x300
100x100
125x125
150x150
200x200
250x250
300x300
350x350
400x400
200x200
250x250
300x300
350x350
400x400
200x200
250x250
300x300
350x350
400x400
Thickness
(mm)
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
12.5
12.5
12.5
12.5
12.5
16.0
16.0
16.0
16.0
16.0
Colour
Orange
Orange
Orange
Orange
Orange
White
White
White
White
White
White
White
White
White
White
Purple
Purple
Purple
Purple
Purple
Purple
Purple
Purple
Rectangular (RHS)
Size
(mm)
50x25
65x35
75x25
75x50
100x50
38x25+
Thickness
(mm)
1.6
1.6
1.6
1.6
1.6
1.6
Colour
Purple
Purple
Purple
Purple
Purple
Purple
Size
(mm)
50x20+
76x38+
80x40+
50x25
65x35
75x25
75x50
100x50
125x75
150x50
38x25+
50x20+
50x30+
50x40+
76x38+
127x51+
75x50
50x25
65x35
75x25
75x50
100x50
125x75
150x50
38x25+
50x20+
50x30+
76x38+
80x40+
127x51+
50x25
65x35
75x50
100x50
125x75
150x50
150x100
50x20+
76x38+
127x51+
100x50
102x76+
127x51+
152x76+
Thickness
(mm)
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
Colour
Purple
Purple
Purple
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Silver
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Pink
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Grey
Grey
Grey
Grey
70
18560 Orrcon National Product Brochure.indd 70
1/09/11 3:21 PM
Colour
Green
Green
Green
Green
Green
Green
Green
Green
Green
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
White
White
White
White
White
White
White
White
White
White
White
White
Purple
Purple
Purple
Purple
Purple
Purple
Size
(mm)
350x250
400x300
Thickness
(mm)
16.0
16.0
Colour
Yard Rail
Size
(mm)
59x30
59x30
97x42
115x42
62x50*
80x61*
115x42
97x42
62x50*
80x61*
Thickness
(mm)
1.6
2.0
2.0
2.0
2.0
2.0
2.3
2.5
2.5
2.5
Colour
Purple
Yellow
Yellow
Yellow
Yellow
Yellow
Silver
Pink
Pink
Pink
Pipe (CHS)
Size
Thickness
(mm)
(mm)
25.4 NB
2.0
20 NB / 26.9 OD
2.0
25 NB / 33.7 OD
2.0
32 NB / 42.4 OD
2.0
20 NB / 26.9 OD
2.3
40 NB / 48.3 OD
2.3
50 NB / 60.3 OD
2.3
65 NB / 76.1 OD
2.3
20 NB / 26.9 OD
2.6
25 NB / 33.7 OD
2.6
32 NB / 42.4 OD
2.6
80 NB / 88.9 OD
2.6
90 NB / 101.6 OD
2.6
100 NB / 114.3 OD
2.6
40 NB / 48.3 OD
2.9
50 NB / 60.3 OD
2.9
125 NB / 139.7 OD
3.0
150 NB / 165.1 OD
3.0
20 NB / 26.9 OD
3.2
25 NB / 33.7 OD
3.2
32 NB / 42.4 OD
3.2
40 NB / 48.3 OD
3.2
Colour
Green
Green
Green
Green
Yellow
Green
Green
Green
Blue
Yellow
Yellow
Green
Green
Pipe (CHS)
Size
Thickness
(mm)
(mm)
65 NB / 76.1 OD
3.2
80 NB / 88.9 OD
3.2
90 NB / 101.6 OD
3.2
100 NB / 114.3 OD
3.2
125 NB / 139.7 OD
3.5
150 NB / 165.1 OD
3.5
50 NB / 60.3 OD
3.6
65 NB / 76.1 OD
3.6
100 NB / 114.3 OD
3.6
25 NB / 33.7 OD
4.0
32 NB / 42.4 OD
4.0
40 NB / 48.3 OD
4.0
80 NB / 88.9 OD
4.0
90 NB / 101.6 OD
4.0
50 NB / 60.3 OD
4.5
65 NB / 76.1 OD
4.5
100 NB / 114.3 OD
4.5
80 NB / 88.9 OD
5.0
90 NB / 101.6 OD
5.0
125 NB / 139.7 OD
5.0
150 NB / 165.1 OD
5.0
100 NB / 114.3 OD
5.4
125 NB / 139.7 OD
5.4
150 NB / 165.1 OD
5.4
Colour
Yellow
Yellow
Yellow
Green
Yellow
Yellow
Blue
Blue
Yellow
Red
Red
Red
Blue
Blue
Red
Red
Blue
Red
Red
Blue
Blue
Red
Red
Red
LEGEND
SHS, RHS & Rails Pipe (CHS)
Purple
Green
1.6
Extra Light
Yellow
2.0
Silver
Yellow
2.3
Light
Pink
2.5
Blue
Blue
3.0
Medium
Grey
3.5
Green
Red
4.0
Heavy
Orange
5.0
White
6.0
Purple
9.0
Size
(mm)
65x35
75x50
100x50
125x75
150x50
150x100
200x100
76x38+
127x51+
75x50
100x50
125x75
150x50
150x100
200x100
250x150
102x76+
127x51+
152x76+
75x50
100x50
125x75
150x50
150x100
200x100
250x150
300x200
400x200
102x76+
127x51+
152x76+
150x100
200x100
250x150
300x200
400x200
400x300
250x150
300x200
350x250
400x200
400x300
250x150
300x200
Rectangular (RHS)
Yellow
Yellow
Green
Green
Blue
Blue
Blue
NOTE:
Pipe (CHS) manufactured to AS/NZS1163/API5L is not listed and has no end code.
Product list without end code has no designated code.
Other sizes available subject to enquiry.
+ Non-standard rectangular (RHS).
* Flat sided round (post).
71
1/09/11 3:21 PM
72
18560 Orrcon National Product Brochure.indd 72
1/09/11 3:21 PM
1/09/11 3:21 PM
CONTACT US
CALL ORRCON STEEL
1300 ORRCON (1300 677 266)
www.orrconsteel.com.au
HEAD OFFICE
121 Evans Rd,
Salisbury QLD 4107
Ph: 07 3274 0500
Fax: 07 3274 0517
E: info@orrcon.com.au
QLD
Quality
ISO 9001
NSW
SA
VIC
WA
25 Cocos Dr,
Bibra Lake WA 6163
Tel: 08 9437 7111 | Fax: 08 9437 7199
E: saleswa@orrcon.com.au
10 Reynolds St,
Mareeba QLD 4880
Tel: 07 4092 7566 | Fax: 07 4092 7588
E: salesmareeba@orrcon.com.au
96 Spencer Rd,
Nerang QLD 4211
Tel: 07 5578 0600 | Fax: 07 5578 0610
E: salesnerang@orrcon.com.au
36 Carrington Rd,
Toowoomba QLD 4350
Tel: 07 4699 9666 | Fax: 07 4699 9699
E: salestwba@orrcon.com.au
12 Denninup Way,
Malaga WA 6090
Tel: 08 9249 5592 | Fax: 08 9248 5191
E: salesmalaga@orrcon.com.au
17 Leyland St,
Townsville QLD 4814
Tel: 07 4779 1888 | Fax: 07 4779 1022
E: salestville@orrcon.com.au
22 Fitzgerald Rd,
Mandurah WA 6210
Tel: 08 9582 6900 | Fax: 08 9582 6999
E: salesmandurah@orrcon.com.au
12 Gibbons Rd,
Bunbury WA 6230
Tel: 08 9724 7500 | Fax: 08 9725 6544
E: salesbunbury@orrcon.com.au