PER II, Feb- 2016
Qns. No. 1. Zener diode is used for
Ans. Voltage Stabilization,
Qus. No. 2. MTCS,
(1) Right hand threaded bolt rotates clockwise, (2) Left hand threaded bolt rotates clockwise.
Qns. No.3. H1 stands for
(1), Solution heat treatment (2) Strain harden only
Qus. No. 4. MTCS.
(2) AN 470 universal head rivet (b) AN 426 ~ flat head rivet (3) AN 430- Brazier head rivet
Qus. No. 5, Aircraft bolts is manufactured by
(2) Class 1 fit loose fit (2) Class 2 fit fr
it (3) Class 3 fit medium fit
Qus. No, 6, Semiconductor conducts...
(1) Hole current (2) Electric current (3) Both (1) & (2) are correct,
Qns. No. 7. If connection is short circuited , chm meter will read.
(1) Zero (2) Infinite (3) One (4) NOTA
Qns. No. 8. MTCS regarding Taps
(1) Taps are national coarse . national fine, national extra fine & National pipeBte.
(2) All Taps are
pered.
Quis. No. 9. To find out the centre of shat or other cylindrical work ..
(2) Combination set_(2) Seriber (3) Micrometer
Qns. No.10.MTt
about drills.
(1) Fraction system of Classification is more
‘curate. (2) Letters system of Classification is more curate,
(3)Number system of Classification is more accurate. (04) ATA are correct.
Quis. No. LI. MICS regarding Chisel
(1) Flat chisel cut thin sheet (2) Diamond chisel cut V cut materials
(3) Cape chisel cut Round shape. (4) ATA is correct.
Qus. No. 12, Fire extinguisher for combustible gaseous agentsQus.
Qus.
Qus.
Qus.
Qns,
Qns.
Qus.
Qns.
Qns.
Qus.
Qus.
(1) Class A (2) Class B (8) Class C (4) Class D
No. 13. In a circuit , at point 3A, current leaving the circuit 7A.
(1) Incoming 4A (2) Leaving 4A (3) Incoming 17A (4) Leaving 17 A
No. 14. About Drill size
(1) 01 is the larger size (2) 01 is smaller size (3) 80 is larger size (4) ATA are wrong.
No. 15. Helivoil is used as .
(1) Screw thread bushing (2) restore damaged threaded parts, (3) Both (1) & (2) are correct.
No. 16, Aluminium &€ its alloy are welded by....
(1) Metal Are welding (2) TIG (3) Spot welding
No. 17, Clevis bolt is used for.
(1) Shear load (2) Tension Load (3) Compression Load (4) ATAare correct.
No. 18. The property of being permanently extended or flattened by hammering , rolling, or
pressing without rupture.
(1) Malleability (2) Toughness (3) Hardness (4) Elasticity
No. 19, Diamond cone and harden stee! ball used by.
(1) Brinell hardness tester (2) Rockwell tester (3) Barcoal tester
No. 20. MTCS
(2) Tempering is always carried out at temp. below the lower critical point.
(2) Annealing of steel produces hard steel. (3) Both (1) & (2) are correct
No. 21, Brinelling means,
(1) The property of metal... (2)
No. 22, MTCS regarding rubber.
(1) Synthetic rubber easily detoriated than natural rubber.
(2) Neoprene has better low temp. characterized
(3) Butyl rubber is used along with Skydrol hydraulic fluid,
No. 23.Which is self locking nut?
(1) Plain hexagonal nut (2) Fibre lock nut (3) Clevis mut (4) Jo Bott
No. 24, MICS about Tum buckle.
(1) Both side of the tum buckle will have right hand thread,