Professional Documents
Culture Documents
2. Scaled architectural floor plan for each level of each building showing:
-
All floor slab details (rebar detail in both direction with extra top detail and Thickness of
slabs )
General size and location of major floor openings
All stair detail including stair beam detail
Shear wall detail (if available)
Signature and seal of responsible engineer (with IEB membership number and date) in
structural drawings
Lateral Load
- Wind Load as per BNBC 2006
(It should be properly assigned as per BNBC)
Load Combination
Minimum load combination should be as per ALLIANCE GUIDELINE but if anyone use more
than these load combinations, that report is obviously accepted and highly appreciated. But at
the time of preparing design documents (if anyone use Alliance load combination) it should be
clearly mentioned in the report that Load combination is used as per Alliance Standard (This
is only for design report not for DEA)
1.2DL+1.6LL+0.5Lr
1.2DL+0.5LL+0.5Lr+1.3WX
1.2DL+0.5LL+0.5Lr-1.3WX
1.2DL+0.5LL+0.5Lr+1.3WY
1.2DL+0.5LL+0.5Lr-1.3WY
Final Report/Results
Serviceability Check/compliance report:
- Deflection check/compliance report
- Drift/Horizontal displacement check/compliance report
- Slenderness check/compliance report
Structural Adequacy report:
-