You are on page 1of 12

MACROTECH POLYSEAL, INC.

Service, Solutions, Performance

Excluders
Product Guide

EX-1000
R E V # E X- 1 0 0 0 - B

Macrotech Polyseal, Inc.


Excluders for Today's Industr y Applications
Since 1973, MPI has been on the forefront of seal design
and development for every conceivable hydraulic and
pneumatic application.
MPI's commitment to increased reliability and performance is
evident in all of our product lines. Our Excluder line is no
exception. The Excluders offered in this line excel in all
intended levels of operation. You can be assured when you
use an MPI Excluder, you are using the highest quality, most
successful excluder on the market.
One of the major causes of premature system failure in fluid
power systems is the absence of the proper rod excluder.
Moisture, dust, grit, and other contaminants can foul the fluid
environment, causing major damage to cylinder walls, rod
surfaces, precision valves, seals, and other components. A
proper rod excluder from MPI can eliminate these
contaminants from modern fluid power systems.
MPI's complete family of rod excluders, together with
superior technical support assures that you will get the
proper excluder for your application. Your excluder will be
made of the right material to provide the abrasion resistance,
elasticity, resilience, and fluid compatibility needed for you
application.
The following pages show MPI's excluder designs and their
recommended operation parameters.

Product Guide
MC, MCS SC and SH Series . . . . . . . . . . . . . .4
H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
D, DS, DT and DX Series . . . . . . . . . . . . . . . . .8
AN, 940 and 959 Series . . . . . . . . . . . . . . . .10

Contact Macrotech Polyseal Inc. for


Specific Assistance

Petrolium Oil

Refer to the Fluid Sealing Association technical


handbook or contact Macrotech Polyseal
Engineering for more specific information.

Not recommended, severe effect.

PTFE
(Polytetrafluoroethylene)

Serviceable, moderate effect.

Extended Range
Lubrithane U-1023

Standard Lubrithane
U-1003

Recommended, little or no effect.

POLY-VI
V-7503

Phosphate Ester
Based Fluid

-240C
-400F

32

F -148 -58

Light
Light
Moderate/Heavy
Severe
Moderate/Heavy
Heavy

H Wiper
K Wiper
Xcluder (DX)
DD Spectraseal Wiper
Metal Clad Wipers (MC)
Spring Loaded Wipers (MCS)
SH Wiper

Moderate/Heavy

Self Cleaning MC Wiper (SCMC) Moderate/Heavy

Moderate
Moderate/Heavy

Standard Polyseal

Moderate

DT Wiper

Moderate

DS Wiper

150

200 250

105C
220F

204C
400F

= intermittent

120C
250F

105C
220F

130C
265F

288C
550F

212 302 392 482

100

93C
200F

122

50

Light Environments Equipment will only be exposed to


clean inside duty with light dust.
Moderate Environments Equipment will be exposed to
both inside and outside duty.
Heavy Environments Equipment will be exposed to
settings that include mud, cement and severe weather.
Severe Environments Equipment will be exposed to
harsh chemicals or need to withstand extreme
temperatures.

-54C
-65F

-54C
-65F

-29C
-20F

-37C
-35F

C -100 -50

Recommended Temperature Range by Polymer

Environment
Compatibility
Light

AN - 959

Excluder Types

DOT 3 Brake
Fluid

D Wiper

Silicon Based
Fluid

Fluid Compatibility
Water Based
Hydraulic Fluid

Nitrile A-8503

Material

Water

Macrotech Polyseal, Inc.


Excluder Selection Char t

Other

MC, MCS, SC and SH Series


Metal Clad Wipers (MC) Lubrithane element encased in a
high quality steel metal retainer provides mechanical bonding as
the element overlaps a portion of the retainer. A chemical bond
is also provded. Rigid enough to handle tough scraping
environments such as dry/wet mud and ice yet sensitive
enough to exclude fine dust and moisture.

+.015
-.000

Slight Lead Chamfer Required


.025 R Max
64
MAX

Metal Clad Spring Loaded Wiper (MCS) Unique lip


design permits installation of a stainless-steel spring, which
excludes contaminants during the most severe service
conditions such as temperature extremes.
SC (Self Cleaning) Wiper Specially designed lip keeps
mud, cement, and other similar substances from hardening in
the wiper. A RL** wiper lip provides a reduction in apparent rod
seal leakage while maintaining equivalent ingression resistance
to a sharp lip wiper.

+.001
-

SH Wiper One piece press-in type rod wiper designed for


medium duty applications. Secondary U-Cup. RL** wiper lip
provides a reduction in apparent rod seal leakage while
maintaining equivalent ingression resistance to a sharp lip
wiper.

**RL wiper lip is designed to resist ingression and reduce oil leakage ring.

Part
Number
*-0500
*-0625
*-0750
*-0875
*-1000
*-1125
*-1250
*-1375
*-1500
*-1625
*-1750
*-1875
*-2000
*-2125
*-2250
*-2375
*-2500
*-2625
*-2750
*-2875
*-3000

A
Rod
Diameter
0.500
0.625
0.750
0.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000

B
Groove
Diameter
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000
3.125
3.250
3.375
3.500

C
Groove
Width
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312

* is MC, MCS, SC or SH depending on style.

Part
Number
*-3125
*-3250
*-3375
*-3500
*-3625
*-3750
*-3875
*-4000
*-4125
*-4250
*-4375
*-4500
*-4750
*-5000
*-5250
*-5500
*-5750
*-6000
*-6750

A
Rod
Diameter
3.125
3.250
3.375
3.500
3.625
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.750
5.000
5.250
5.500
5.750
6.000
6.750

B
Groove
Diameter
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.625
4.750
4.875
5.000
5.125
5.375
5.625
5.875
6.125
6.375
6.625
7.375

C
Groove
Width
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375

H Series
C

H Style Wiper One piece snap-in type rod


wiper designed for light duty application.
Secondary U-Cup. RL* lip provides a
reduction in apparent rod seal leakage while
maintaining equivalent ingression resistance
to a sharp lip wiper.
*RL wiper lip is designed to resist ingression and reduce oil
leakage ring.

.025 R MAX
64
MAX

H style wiper is not intended as a high pressure seal.

Part
Number
H-0250
H-0312
H-0375
H-0437
H-0500
H-0562
H-0625
H-0687
H-0750
H-0812
H-0875
H-0937
H-1000
H-1062
H-1125
H-1187
H-1250
H-1312
H-1375
H-1437
H-1500
H-1562
H-1625
H-1687
H-1750
H-1812

A
B
C
Rod
Groove Groove
Diameter Diameter Width
0.250
0.312
0.375
0.437
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.937
1.000
1.062
1.125
1.187
1.250
1.312
1.375
1.437
1.500
1.562
1.625
1.688
1.750
1.812

0.552
0.615
0.677
0.740
0.802
0.865
0.927
0.990
1.052
1.177
1.240
1.302
1.365
1.427
1.490
1.552
1.615
1.702
1.740
1.802
1.865
1.927
1.990
2.052
2.115
2.177

0.203
0.203
0.203
0.203
0.203
0.203
0.203
0.203
0.203
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218
0.218

+.015
-.000

+.003
-.000

D
Shoulder
Diameter

Part
Number

.370
.432
.495
.557
.620
.682
.745
.808
.870
.947
1.010
1.072
1.135
1.197
1.260
1.322
1.385
1.447
1.510
1.572
1.635
1.697
1.760
1.823
1.885
1.947

H-1875
H-1937
H-2000
H-2062
H-2125
H-2187
H-2250
H-2312
H-2375
H-2437
H-2500
H-2562
H-2625
H-2687
H-2750
H-2812
H-2875
H-2937
H-3000
H-3125
H-3250
H-3375
H-3500
H-3625
H-3750
H-3875

A
B
Rod
Groove
Diameter Diameter
1.875
1.937
2.000
2.062
2.125
2.188
2.250
2.312
2.375
2.437
2.500
2.562
2.625
2.688
2.750
2.812
2.875
2.938
3.000
3.125
3.250
3.375
3.500
3.625
3.750
3.875

2.240
2.302
2.365
2.427
2.490
2.683
2.745
2.807
2.870
2.932
2.995
3.057
3.120
3.183
3.245
3.307
3.370
3.433
3.495
3.620
3.745
3.870
3.995
4.120
4.245
4.370

+.003
-.000

C
Groove
Width

D
Shoulder
Diameter

0.218
0.218
0.218
0.218
0.218
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281

2.010
2.072
2.135
2.197
2.260
2.323
2.385
2.447
2.510
2.572
2.635
2.697
2.760
2.823
2.885
2.947
3.010
3.073
3.135
3.260
3.385
3.510
3.635
3.760
3.885
4.010

Part
Number
H-4000
H-4125
H-4250
H-4375
H-4500
H-4625
H-4750
H-4875
H-5000
H-5125
H-5250
H-5375
H-5500
H-5625
H-5750
H-5875
H-6000

A
B
C
Rod
Groove Groove
Diameter Diameter Width
4.000
4.125
4.250
4.375
4.500
4.625
4.750
4.875
5.000
5.125
5.250
5.375
5.500
5.625
5.750
5.875
6.000

4.495
4.620
4.745
4.870
4.995
5.120
5.245
5.370
5.495
5.620
5.745
5.870
5.995
6.120
6.245
6.370
6.495

0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281

D
Shoulder
Diameter
4.135
4.260
4.385
4.510
4.635
4.760
4.885
5.010
5.135
5.260
5.385
5.510
5.635
5.760
5.885
6.010
6.135

A
B
Rod
Groove
Type Part
Number Diameter Diameter
H-6250
H-6500
H-6750
H-7000
H-7250
H-7500
H-7750
H-8000
H-8250
H-8500
H-8750
H-9000
H-9250
H-9500
H-9750
H-10000

6.250
6.500
6.750
7.000
7.250
7.500
7.750
8.000
8.250
8.500
8.750
9.000
9.250
9.500
9.750
10.000

6.745
6.995
7.245
7.495
7.745
7.995
8.245
8.495
8.745
8.995
9.245
9.495
9.745
9.995
10.245
10.495

C
Groove
Width

D
Shoulder
Diameter

0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281
0.281

6.385
6.635
6.885
7.135
7.385
7.635
7.885
8.135
8.385
8.635
8.885
9.135
9.385
9.635
9.885
10.135

K Series

+.015
C -.000
.025 R Max

K Style Wiper One piece snap-in


type rod wiper designed for light duty
application. Secondary U-Cup.
+.015
B +.005
-.000 D -.000

30

Part
Number
K-0500
K-0562
K-0625
K-0687
K-0750
K-0812
K-0875
K-0937
K-1000
K-1062
K-1125
K-1187
K-1250
K-1312
K-1375
K-1437
K-1500
K-1562
K-1625
K-1687
K-1750
K-1812
K-1875
K-1937
K-2000
K-2125
K-2250
K-2375
K-2500
K-2625
K-2750
K-2875

A
B
C
Rod
Groove Groove
Diameter Diameter Width
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
1.063
1.125
1.188
1.250
1.313
1.375
1.138
1.500
1.563
1.625
1.688
1.750
1.813
1.875
1.938
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875

0.760
0.822
0.885
0.947
1.135
1.197
1.260
1.322
1.385
1.447
1.510
1.572
1.635
1.697
1.760
1.822
1.885
1.947
2.010
2.072
2.135
2.197
2.260
2.322
2.385
2.510
2.760
2.885
3.010
3.135
3.260
3.385

.155
.155
.155
.155
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.195
.255
.255
.255
.255
.255
.255

D
Shoulder
Diameter
.625
.687
.750
.812
.832
.894
.957
1.019
1.082
1.144
1.207
1.269
1.332
1.394
1.457
1.519
1.582
1.644
1.707
1.769
1.832
1.894
1.957
2.019
2.082
2.207
2.407
2.532
2.657
2.782
2.907
3.032

A
B
Type Part
Rod
Groove
Number Diameter Diameter
K-3000
K-3125
K-3250
K-3375
K-3500
K-3625
K-3750
K-3875
K-4000
K-4125
K-4250
K-4375
K-4500
K-4625
K-4750
K-4875
K-5000
K-5250
K-5500
K-5750
K-6000
K-6250
K-6500
K-6750
K-7000
K-7500
K-8000
K-8500
K-9000
K-9500
K-10000

3.000
3.125
3.250
3.375
3.500
3.625
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.625
4.750
4.875
5.000
5.250
5.500
5.750
6.000
6.250
6.500
6.750
7.000
7.500
8.000
8.500
9.000
9.500
10.000

3.510
3.635
3.760
3.885
4.010
4.135
4.260
4.385
4.510
4.635
4.760
4.885
5.010
5.135
5.260
5.385
5.510
5.760
6.010
6.260
6.510
6.760
7.010
7.260
7.510
8.010
8.510
9.010
9.510
10.010
10.510

45 X 1/64 Chamfer

C
Groove
Width

D
Shoulder
Diameter

.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255
.255

3.157
3.282
3.407
3.532
3.657
3.782
3.907
4.032
4.157
4.282
4.407
4.532
4.657
4.782
4.907
5.032
5.157
5.407
5.657
5.907
6.157
6.407
6.657
6.907
7.157
7.657
8.157
8.657
9.157
9.657
10.157

D, DS DT and DX Series
D Wiper Used most often on rod diameters of 6-inches or
larger. Step up from the AN959 wiper and is ideal for largediameter applications and more contaminated environments.

+.004
-.000

.025 R MAX

DS Wiper The DS Wiper is the same as the D wiper but


includes a slot which eliminates back pressure. Raised portions
on OD heel provide improved OD ingression resistance.
DT Wiper One piece snap-in type rod wiper designed for
medium duty applications. OD lip provides improved OD
ingression resistance. RL wiper lip reduces apparent rod seal
leakage with equivalent ingression resistance to a sharp lip
wiper.

64
MAX

+.010
-.000

+.006
-.000

Xcluder (DX) Retrofits a standard D Wiper groove. Used in


applications with severe side deflections. RL wiper lip reduces
apparent rod seal leakage with equivalent ingression resistance
to a sharp lip wiper. O-ring must be installed for proper
performance.

Part
Number

A
B
C
Rod
Groove Groove
Diameter Diameter Width

D
Shoulder
Diameter

0.250
.497
.124
.410
*-0250
0.313
.560
.124
.475
-0312
*
0.375
.622
.124
.535
*-0375
0.438
.685
.124
.600
*-0437
0.500
.747
.124
.660
-0500
*
0.563
.810
.124
.725
*-0562
0.625
.872
.124
.785
*-0625
0.688
.935
.124
.850
-0687
*
0.750
1.122
.187
.995
*-0750
0.813
1.185
.187
1.060
*-0812
0.875
1.247
.187
1.120
-0875
*
0.938
1.310
.187
1.185
*-0937
0.100
1.372
.187
1.245
*-1000
1.063
1.435
.187
1.310
-1062
*
1.125
1.497
.187
1.370
*-1125
1.188
1.560
.187
1.435
*-1187
1.250
1.622
.187
1.495
-1250
*
1.313
1.685
.187
1.560
*-1312
1.375
1.747
.187
1.620
-1375
*
1.438
1.810
.187
1.685
-1437
*
1.500
1.872
.187
1.745
*-1500
1.563
1.935
.187
1.810
-1562
*
1.625
1.997
.187
1.870
-1625
*
1.688
2.060
.187
1.935
*-1687
1.750
2.122
.187
1.995
-1750
*
1.813
2.185
.187
2.060
-1812
*
1.875
2.247
.187
2.120
*-1875
1.938
2.310
.187
2.185
-1937
*
2.00
2.497
.249
2.327
-2000
*
* is D, DS, DT or DX depending on style.

A
B
Type Part
Rod
Groove
Number Diameter Diameter

C
Groove
Width

D
Shoulder
Diameter

2.063
2.125
2.188
2.250
2.313
2.375
2.438
2.500
2.563
2.625
2.688
2.750
2.823
2.875
2.938
3.000
3.125
3.250
3.375
3.500
3.625
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.625

.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
.249
374
.374

2.390
2.452
2.515
2.577
2.640
2.702
2.765
2.827
2.890
2.952
3.015
3.077
3.140
3.202
3.265
3.327
3.452
3.577
3.702
3.827
3.952
4.077
4.202
4.327
4.452
4.577
4.702
4.993
5.118

*-2062
*-2125
*-2187
*-2250
*-2312
*-2375
*-2437
*-2500
*-2562
*-2625
*-2687
*-2750
*-2812
*-2875
*-2937
*-3000
*-3125
*-3250
*-3375
*-3500
*-3625
*-3750
*-3875
*-4000
*-4125
*-4250
*-4375
*-4500
*-4625

2.560
2.622
2.685
2.747
2.810
2.872
2.935
2.997
3.060
3.122
3.185
3.247
3.310
3.372
3.435
3.497
3.622
3.747
3.872
3.997
4.122
4.247
4.372
4.497
4.622
4.747
4.872
5.247
5.372

Part
Number

*-4750
*-4875
*-5000
*-5125
*-5250
*-5375
*-5500
*-5625
*-5750
*-5875
*-6000
*-6250
*-6500
*-6750
*-7000
*-7250
*-7500
*-7750
*-8000

A
B
Rod
Groove
Diameter Diameter
4.750
4.875
5.000
5.125
5.250
5.375
5.500
5.625
5.750
5.875
6.000
6.250
6.500
6.250
7.000
7.250
7.500
7.750
8.000

5.497
5.622
5.747
5.872
5.997
6.122
6.247
6.372
6.497
6.622
6.747
6.997
7.247
7.497
7.747
7.997
8.247
8.497
8.747

C
Groove
Width

D
Shoulder
Diameter

.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374
.374

5.243
5.368
5.493
5.618
5.743
5.868
5.993
6.118
6.243
6.368
6.493
6.743
6.993
7.243
7.493
7.743
7.993
8.243
8.493

A
B
Rod
Groove
Part
Number Diameter Diameter

C
Groove
Width

D
Shoulder
Diameter

8.125
8.500
8.750
9.000
9.125
9.500
9.750
10.000
10.125
10.500
10.750
11.000
11.250
11.500
11.750
12.000
12.500
13.000

.374
.374
.374
.374
.374
.374
.374
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499

8.743
8.993
9.243
9.493
9.743
9.993
10.243
10.659
10.909
11.159
11.409
11.659
11.909
12.159
12.409
12.659
13.159
13.659

*-8250
*-8500
*-8750
*-9000
*-9250
*-9500
*-9750
*-10000
*-10250
*-10500
*-10750
*-11000
*-11250
*-11500
*-11750
*-12000
*-12500
*-13000

8.997
9.247
9.497
9.747
9.997
10.247
10.497
10.997
11.247
11.497
11.747
11.997
12.247
12.497
12.747
12.997
13.497
13.997

* is D, DS, DT or DX depending on style.

AN, 940 and 959 Series


C

AN 959 Wiper Light duty snap-in wiper


that will retrofit into glands perscribed in
MS-3375 for corresponding dash numbers
of MS-28776

.025 R MAX

Dash
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
17.5
18
18.5
19
19.5
20
20.5
21
21.5
22

A
B
Rod
Groove
Diameter Diameter
0.498
0.760
0.560
0.823
0.623
0.885
0.685
0.948
0.748
1.010
0.810
1.084
0.873
1.147
0.935
1.209
0.998
1.272
1.060
1.334
1.123
1.397
1.185
1.459
1.248
1.522
1.310
1.614
1.373
1.677
1.435
1.739
1.498
1.802
1.561
1.865
1.623
1.927
1.686
1.990
1.748
2.052
1.811
2.115
1.873
2.177
1.936
2.240
1.998
2.302
2.061
2.365
2.123
2.427

C
Groove
Width
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.107

D
Shoulder
Diameter
.647
.710
.772
.834
.897
.960
1.023
1.085
1.148
1.210
1.273
1.335
1.398
1.480
1.542
1.605
1.668
1.731
1.793
1.856
1.918
1.981
2.043
2.106
2.178
2.241
2.303

+.003
-.003

+.005
-.000

Part
Number
22.5
23
23.5
24
24.5
25
25.5
26
26.5
27
27.5
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

A
B
Rod
Groove
Diameter Diameter
2.186
2.490
2.248
2.552
2.311
2.615
2.373
2.677
2.436
2.740
2.498
2.802
2.561
2.865
2.623
2.989
2.686
3.052
2.748
3.114
2.811
3.177
2.873
3.239
2.997
3.364
3.122
3.489
3.247
3.614
3.372
3.729
3.497
3.864
3.622
3.989
3.747
4.114
3.872
4.239
3.997
4.427
4.122
4.552
4.247
4.677
4.372
4.802
4.497
4.927
4.622
5.052
4.747
5.177

Series 940 and 959 Wiper Rings will function in a gland as prescribed in MS-33675 for corresponding dash numbers of MS-28776.

10

C
Groove
Width
0.107
0.107
0.107
0.107
0.107
0.107
0.107
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.122
0.138
0.138
0.138
0.138
0.138
0.138
0.138

+.000
-.002

+.004
-.000

D
Shoulder
Diameter
2.366
2.428
2.491
2.553
2.616
2.678
2.741
2.834
2.897
2.959
3.022
3.084
3.209
3.334
3.459
3.584
3.709
3.834
3.959
4.084
4.240
4.365
4.490
4.615
4.740
4.865
4.990

Dash
Number
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
61.5

A
B
Rod
Groove
Diameter Diameter
4.872
5.302
4.997
5.427
5.122
5.552
5.247
5.677
5.372
5.802
5.497
5.927
5.622
6.114
5.747
6.239
5.872
6.364
5.997
6.489
6.247
6.739
6.497
6.989
6.747
7.239
6.997
7.489
7.247
7.739
7.497
7.989
7.747
8.239
7.997
8.489
8.247
8.739

C
Groove
Width
0.138
0.138
0.138
0.138
0.138
0.138
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154

D
Shoulder
Diameter
5.115
5.240
5.365
5.490
5.615
5.740
5.896
6.022
6.146
6.272
6.522
6.772
7.022
7.272
7.522
7.772
8.022
8.272
8.522

Part
Number
62
62.5
63
63.5
64
64.5
65
65.5
66
66.5
67
67.5
68
68.5
69
69.5
70
70.5
71

A
B
Rod
Groove
Diameter Diameter
8.497
8.989
8.747
9.239
8.997
9.489
9.247
9.739
9.497
9.989
9.747
10.239
9.997
10.489
10.247
10.739
10.497
10.989
10.747
11.239
10.997
11.489
11.247
11.739
11.497
11.989
11.747
12.239
11.997
12.489
12.247
12.739
12.497
12.989
12.747
13.239
12.997
13.489

C
Groove
Width
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.154
0.169
0.169
0.169
0.169
0.169
0.169
0.169
0.169

D
Shoulder
Diameter
8.772
9.022
9.272
9.522
9.772
10.022
10.272
10.522
10.772
11.022
11.272
11.522
11.772
12.022
12.272
12.522
12.772
13.022
13.272

11

Important Notice
We reserve the right to make changes without notice in
our products and in the information content of this
brochure. The statements and information in the brochure
are intended to serve only as guides. They are not
warranties or binding descriptions of the products.
Requests for more information are welcome. In particular,
we will be glad to provide samples for you to inspect and
test in your assemblies and plant before you make a final
decision for your application.

Notice of Exclusive Warranty and Remedy


Briefly, our exclusive warranty is against defects in
materials and workmanship at the time of shipment. It is in
lieu of all other warranties. There is no implied warranty of
merchantability or fitness for a particular purpose. The
exclusive remedy is replacement of defective products, or
at our option, refund of their purchase price. All damages
exceeding the purchase price are excluded, whether
consequential or otherwise and regardless of cause. The
terms and conditions on our printed quotation contain a
much more complete statement of our Exclusive Warranty
and Remedy.

Macrotech Polyseal, Inc.


1750 West 500 South
Salt Lake City, UT 84104
(801)973-9171
(801)973-9188 FAX
Copyright 1994 Macrotech Polyseal, Inc.
Printed in the USA 1/02

You might also like