You are on page 1of 6

General Description

The SKE are power humidifiers designed to


provide sterile steam for humidification.

They combine the latest microprocessor


based electronic design with carefully
matched metallurgical and mechanical
technology perfected over two decades by
Neptronic.

The humidifiers are available in capacities


from 5 to 80 kg/hr in ON-OFF and fully
MODULATING versions.

The design is based on permanent rather


than replaceable containers.

Now available with BACnet, the most widely


used HVAC communication protocol.

Simplicity of Operation Alphanumeric


and Service Display and
Control
The SKE humidifier consists of an automatically water fed Buttons
stainless steel container with an easily removable cover
containing heating elements and water level sensors.

Periodic servicing of the unit can be easily done in minutes. All mechanical, power and
control connections are readily accessible for quick servicing.

Remote communication with the SKE humidifiers using BACnet allows for remote
change of variables and more, such as setpoints, PID parameters and receiving
comprehensive maintenance messages.

Exceptional Reliability
Reliability of the SKE humidifier is one of the features that sets it apart from competing humidifiers. Using the
proprietary AFEC® technology, the SKE is much more forgiving to variable water conditions. Great care has been taken
to select materials which have proven themselves for their exceptional performance in very harsh conditions. Such
materials are elements made of super alloy, incoloy 825, teflon-sleeved stainless steel level control probe, silicon
tubing and baked painted aluminum cabinet.

Selection of electro-mechanical and electronic components was based on many years of experience and
exhaustive testing. All SKE units pass through rigorous quality control inspection and full power check.
Benefits The AFEC ®- System
Anti-Foaming Energy Conservation System
Exceptional reliability
The AFEC® technology developed by the Neptronic
engineering team offers a unique safety and energy
Energy conservation
conservation management of expensive boiling water and
steam. The AFEC® system is made of mass measuring
Very high return on investment water sensor, antifoam sensor, electronic high temperature
sensor, interactive LCD display and microprocessor
Simplicity of operation and service controller.

The AFEC® system is unique because:


Attractive packaging The water sensor cannot be falsely triggered by foam
formation on the top of the boiling water. This eliminates the
problem of heating elements burning out in free air.

WATER MASS
ANTI- FOAM PROBE AND
TEMPERATURE
PROBE

Indicators and Switches


ALPHANUMERIC
BACKLIT DISPLAY
information & control center
menu & button controls
POWER
unit is connected to power
source

CHECK
unit indicates an abnormal
condition of operation
(ie: blocked water supply)

FILL
water supply valve is open

The Additional foam-sensing probe, which is unique to our


STEAM
design, would automatically initiate a drain cylcle upon
humidifier is ON and there is
a humidity demand foam formation. Unlike other humidifiers, the drain can be
initiated only when necessary without having continuous
skimming to drain off expensive boiling water. This is an
MANUAL SWITCH
(3 Position) excellent energy conservation measure.
AUTO automatic
operation The SKE is unique in that it has fast acting electronic safety
OFF unit is off temperature sensors inside the steam container that are in
DRAIN unit is in manual proximity to the heating elements. Other humidifiers use
drain mode only a bimetallic external electro-mechanical temperature
switch (which is also standard on all SKE). Therefore the
DRAIN AFEC® system provides an additional layer of protection.
unit is in drain cycle
Multi-steam S.D.U. (Space Distribution Unit)

For the most efficient steam absorption, Our low profile Steam Distribution Unit is
Neptronic developed 2 different steam to be used where ducted air distribution
dispersion methods using the MULTI- system is not available. The steam is
STEAM or SAM distributors. discharged directly into the required area.
S.D.U. is available in 3 sizes. A tangential
fan delivers a quiet and efficient steam
distribution.

Dimensions (mm)
model A B C D SDU

SKE05 597mm 470mm 292mm 737mm SDU-1 D


SKE10 724mm 533mm 318mm 890mm SDU-2

SKE20 724mm 533mm 318mm 890mm SDU-2

SKE30 724mm 533mm 318mm 1048mm SDU-3


A
SKE40 724mm 533mm 318mm 1048mm SDU-3

SKE50 794mm 813mm 318mm - -

SKE60 794mm 813mm 318mm - -

SKE80 794mm 813mm 318mm - -

SKE SDU (space distribution unit)


C
B
available on models SKE05 to SKE40.

Output and power consumption


power capacity amperage # of dia. od
model
Kw Kg/hr 230/1 400/3 outlets outlets
SKE05 3.7 5 16 5.5 1 35mm
SKE10 7.5 10 33 11 1 35mm
SKE20 15 20 - 22 1 35mm
SKE30 22 30 - 33 2 35mm
SKE40 30 40 - 44 2 35mm
SKE50 36 50 - 53 2 54mm
SKE60 44 60 - 64 2 54mm
SKE80 60 80 - 87 3 54mm
Note: Designate the letter M for modulating units. (ie: SKE20M)
Designate the letter D for units operating with deionized water.
Features
• Permanent easily serviceable
stainless steel container

• ON-OFF or MODULATING
control functions

• Interactive LCD display and


microprocessor controlled
self-diagnostics

• AFEC® technology provides


greatest energy conservation
and safest operation

• Functions exceptionally well


in severe, normal or D.I. water
conditions

• Self-cleaning heating elements

• Unit is built from the most


advanced materials such as
stainless steel and teflon
components and silicone
hoses

• Aluminum housing and the


best electronic and electro-
mechanical parts

• Now available with “BACnet”


communication interface
distributed by:

Head Office
Na tiona l Environme ntal Pro duc ts Ltd
400 Lebeau Blvd, Montreal, Quebec H4N 1R6
Tel.: (514) 333-1433 Fax: (514) 333-3163 Toll Free(canada/usa): 1-800-361-2308

U.S . Offic e
NEP Inc.
1300 E. Hillsboro Blvd, Suite 200 Deerfield Beach, Florida 33441
Tel.: (954) 421-6216 Fax: (954) 421-8785
080018_KS 01/05/08

You might also like