Professional Documents
Culture Documents
*
*
*
*
*
21st ~22nd
~ 23rd March 2016
* These courses has been granted CPD allocation by the Board of Engineers of Trinidad and Tobago
oscar.morillo@secemcsolutionsltd.com
http://www.secemcsolutionsltd.com/
INFORMATION:
SE Civil/Electrical/Mechanical/Chemical Solutions Limited was formed in 2014 to play a
strategic role in PROVIDING ENGINEERING CONSULTANCY AND INVESTIGATION ,
ASSERTIVE TRAINING, and SUPPLY STAFF TO ALL INDUSTRIES. We are known for
our reliability, service and quality. We are dedicated to satisfy the ever-changing needs
and requirements of the oil and gas sectors and all industries
Objective:
This course will provide attendees with the tools to efficiently utilize the
STAAD.Pro for the design of steel structures. On completion of the course,
participants will be able to use the software for the preparation of detailed
designs to meet the requirements of ASCE 7, AISC 360, among others.
Course Content
1. Introduction: concepts of idealization for
generals models.
Level 1
9. Load
definitions: loads primary vertical and
horizontal type.
10. Load combinations specified in the
international design standards.
Automatic generator load combinations.
Course Prerequisites
Basic knowledge of analysis and
design of structures
Computer with Windows 7/8
Includes
Support Material / Software Trial
Std Files (Complete Examples for run in Staad Pro)
Assistant qualified in special skills and material
support(installation software, engineering support)
Target Audience
Structural Engineer, Mechanical Engineer,
Plant Engineer, Process Engineer, Structural
Designer,
Duration: 24 hours
Lecturers
Eng. Carlos Rincon
OBJECTIVE:
This course will provide participants with a comprehensive and advanced knowledge
of the software tool used in the analysis. The intuitive modelling environment and the
advanced analysis features for increased productivity and improved quality control are
part of its numerous features.
Course Content
1. Introductions
2. Isolated Foundations
Course Prerequisites
Kknowledge of analysis and
design of structures
Computer with Windows 7/8
Includes
Support Material/Software Trial
Complete Examples
Target Audience
3. Combined Foundations
6. Vessel Foundations
Duration: 16 hours
Lecturers
Eng. Carlos Rincon
7. Interpretation of Results
8. Reinforcement Detailing
9. Calculations Reports
OBJECTIVE:
This course will provide participants with a comprehensive and advanced knowledge
of the software tool used in the analysis. The intuitive modelling environment and the
advanced analysis features for increased productivity and improved quality control are
part of its numerous features.
B31.1 y B31.3
Course Content
1. Introduction to Flexibility Analysis and pipe stress
2. Stresses calculation according Standards
Course Prerequisites
Includes
10. Thermal cycling and maximum stresses (2 Sy)
11. Elongation, as per pressure, and its application,
according to the code:
B31.1
B31.3
B31.4
B31.8
Target Audience
Structural Engineer, Mechanical Engineer,
Plant Engineer, Process Engineer, Structural
Designer,
Duration: 24 hours
Lecturers
Eng. Carlos Rincon
Course Content
Course Prerequisites
Kknowledge of analysis and
design of structures
Computer with Windows 7/8
1. Introduction
Includes
2.2 Compression
2.3 Bending Moments
2.4 Moment Axial interaction
3. Joints in structural systems. Methods of
analysis
Complete Examples
Target Audience
Structural Engineer, Mechanical Engineer,
Plant Engineer, Process Engineer, Structural
Designer,
Duration: 16 hours
Lecturers
Eng. Carlos Rincon
With this course the student will have the ability to:
Handle all the parameters of the AISC 360 and ACI 318.
Applying special supports. Special specifications for members and plates.
Design of retaining walls
Correct interpretation of results in the output / reports / post-processing.
Introduction, to the use of the PDELTA command for Building Design
(AISC 360 and AISC 341).
Introduction, to the method of nonlinear static analysis "PUSHOVER" in STAAD PRO.
Will learn, how to define and prepare reports from this software.
Course Prerequisites
Useof Staad Pro.
Having passed the course Analysis and design using
Staad Pro Level I
Computer with Windows 7/8
Includes
Support Material/Software Trial
Course Content
Level 2
1. Structure Wizard
2. Generation of Slab / Wall Connection
3. Application of Surface thickness
4. Using and editing profiles database
5. Specifications for member properties: Variablesection,
Castellated
Target Audience
Structural Engineer, Mechanical Engineer,
Plant Engineer, Process Engineer, Structural
Designer,
Duration: 32 hours
Lecturers
Eng. Carlos Rincon
Application
Course Prerequisites
Basic knowledge of analysis and
design of structures
Computer with Windows 7/8
Includes
Support Material / Software Trial
Complete Examples
1. Introduction
1.1. Idealization and structural work philosophy with ETABS
1.2 Scope and utility of the software for the structural design
of buildings
2. Geometric & Properties Features
2.1 Predetermined geometric models. Undetermined models.
2.2 Coordinate system, lines, axes and reference planes
2.3 Local axes
2.4 Insertion points
2.5 Multiple windows
2.6 Basic editing options (Copy, Paste, Move, split, merge)
2.7 Generation of internal and external meshes. General utility
2.8 Selection and Zoom Options
2.9 Job commands per story
2.10 Types of structural elements: Frame, Membrane, Plate, Shell, Deck
2.11Definition of profiles and materials (Include Metal Soffit properties)
2.12 Group Definition
3. Advanced Editing, Loads, Design commands
3.1 Advanced editing (Align, Extrude, Extender, Cut)
3.2 Purlins: Special considerations
3.3 Definition of supports
3.4 Loads. Static loads. Types (Joint loads, Uniform linear load,
loads per area)
3.5 Wind load pattern. Assignment. Standards features
3.6 Dynamic loads. Design spectrum. Basic concepts. Interpretation
3.7 Load combinations
4: Exercises
4.1 Case Study No.1 Design of reinforced concrete
buildings
4.2 Case study no.2 Design of structural steel
buildings
5: Reports
5.1 Interpretation of reports. Drift check, ratio,
slenderness
5.2 Options to import and exporting files.
5.3 Interaction with AUTOCAD and EXCEL
5.4 Introduction to using SAP2000 and SAFE.
Similarities, differences
Target Audience
Duration: 24 hours
Lecturers
Eng. Carlos Rincon
LAST NAME:
Registration for the course (s):
ORGANIZATION:
ADDRESS:
RELEVANT EXPERIENCE:
TELEPHONE (home)
(cell)
TELEPHONE (work)
(fax)
E-mail:
E-mail:
Vegetarian
Non-Vegetarian
Board Of Engineering
APETT
Direct E-mail
Eng. OscarMorillo
Other (pleasespecify)
SIGNATURE
No credit cards or personal chequesaccepted.
Payment can be made by cash, certified cheques or company cheques.
Please make deposits to the account # 81745/1203314 SPANISH/ENGLISH CIVIL, ELECTRICAL,MECHANICAL, CHEMICAL
SOLUTIONS LTD SCOTIA BANK
Rec #
Cheque#
Date Received
Cash
Invoice #
Initials
E-mail: seengineeringsolution@gmail.com
(Oscar Morillo) T (868)-2256319 /M (868) 335-3693
http://www.secemcsolutionsltd.com/