REPORT ON TORSION IN STRUCTURAL CONCRETE (ACI 445.1R-12)
Institute), Moscow, pp. 5-28 (in Russian). Translated by
Portland Cement Association, Foreign Literature Study No. 371 (Available from S. L. A. Translation Center, John Crerar Library Translation Center, Chicago, IL). Leu, L. J., and Lee, Y. S., 2000, Torsion Design Charts for Reinforced Concrete Rectangular Members, Journal of Structural Engineering, V. 126, No. 2, pp. 210-218. Lim, S. N., and Mirza, M. S., 1968, discussion of Reinforced Concrete T-Beams without Stirrups under Combined Moment and Torsion, by D. J. Victor and P. M. Fergusson, ACI Journal, V. 65, No. 7, July, pp. 560-563. Logan, D. R., 2007, L-Spandrels: Can Torsional Distress Be Induced by Eccentric Vertical Loading? PCI Journal, V. 52, No. 2, Mar.-Apr., pp. 46-61. Lubliner, J., 1990, Plasticity Theory, Macmillan Publishing Co., New York, 495 pp. Lchinger, P., 1977, Bruchwiderstand von Kastentrgern aus Stahlbeton unter Torsion, Biegung und Querkraft (Ultimate Strength of Box-Girder Beams in Reinforced Concrete loaded in Torsion, Bending and Shear), Institut fr Baustatik und Konstruktion, ETH Zrich, Bericht Nr 69, Birkhuser Verlag, Basel und Stuttgart, 107 pp. Lucier, G.; Rizkalla, S.; Zia, P.; and Klein, G., 2007, Precast Concrete, L-Shaped Spandrels Revisited: FullScale Tests, PCI Journal, V. 52, No. 2, pp. 62-76. Lucier, G.; Walter, C.; Rizkalla, S.; and Zia, P., 2010, Development of a Rational Design Methodology for Precast Slender Spandrel Beams, Research Report No. IS-09-10, Construction Facilities Laboratory, Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC. MacGregor, J. G., and Ghoneim, M. G., 1995, Design for Torsion, ACI Structural Journal, V. 92, No. 2, Mar.-Apr., pp. 211-218. Mansour, M., and Hsu, T. T. C., 2005a, Behavior of Reinforced Concrete Elements under Cyclic Shear: Part I Experiments, Journal of Structural Engineering, V. 131, No. 1, pp. 44-53. Mansour, M., and Hsu, T. T. C., 2005b, Behavior of Reinforced Concrete Elements under Cyclic Shear: Part II Theoretical Model, Journal of Structural Engineering, V. 131, No. 1, pp. 54-65. Mansour, M.; Lee, J. Y.; and Hsu, T. T. C., 2001, Cyclic Stress-Strain Curves of Concrete and Steel Bars in Membrane Elements, Journal of Structural Engineering, V. 127, No. 12, pp. 1402-1411. Mardukhi, J., 1974, The Behaviour of Uniformly Prestressed Concrete Box Beams in Combined Torsion and Bending, Masters thesis, University of Toronto, Toronto, ON, Canada, 73 pp. Marti, P., and Kong, K., 1987, Response of Reinforced Concrete Slab Elements to Torsion, Journal of Structural Engineering, V. 113, No. 5, pp. 976-993. Marti, P.; Leesti, P.; and Khalifa, W., 1987, Torsion Tests on Reinforced Concrete Slab Elements, Journal of Structural Engineering, V. 113, No. 5, pp. 994-1010.
Mattock, A. H., 1979, Flexural Strength of Prestressed
Concrete Sections by Programmable Calculator, PCI Journal, V. 24, No. 1, pp. 32-54. McGee, W. D., and Zia, P., 1973, Prestressed Concrete Members Under Torsion, Shear, and Bending, Research Report, Department of Civil Engineering, North Carolina State University, Raleigh, NC, 212 pp. McMullen, A. E., and Daniel, H. R., 1975, Torsional Strength of Longitudinally Reinforced Concrete Beams Containing an Openings, ACI Journal, V. 72, No. 8, Aug., pp. 415-420. McMullen, A. E., and El-Degwy, W. M., 1985, Prestressed Concrete Tests Compared with Torsion Theories, PCI Journal, V. 30, No. 5, pp. 96-127. (discussion by Hsu and Mo, V. 31, No. 5, Oct., pp. 160-164). McMullen, A. E., and Warwaruk, J., 1967, The Torsional Strength of Rectangular Reinforced Concrete Beams Subjected to Combined Loading, Report No. 2, Department of Civil Engineering, University of Alberta, Edmonton, AB, Canada, 162 pp. McMullen, A. E., and Woodhead, H. R., 1973, Experimental Study of Prestressed Concrete Under Combined Torsion, Bending, and Shear, PCI Journal, V. 18, No. 5, pp. 85-100. Melan, E., 1938, Der Spannungszustand eines Mieseschen-Henckyschen Kontinuums bei vernderlicher Belastung. Sitzungsberichte, Akademie der Wissenschaften in Wien, Abt. II/a, V. 147, pp. 73-87. Mirza, M. S., and McCutcheon, J. O., 1968, discussion of Torsion of Structural ConcreteInteraction Surface for Combined Torsion, Shear and Bending in Beams without Stirrups,, ACI Journal, V. 65, No. 7, July, pp. 567-570. Mitchell, D., and Collins, M. P., 1974, Diagonal Compression Field TheoryA Rational Model for Structural Concrete in Pure Torsion, ACI Journal, V. 71, No. 8, Aug., pp. 396-408. Mitchell, D., and Collins, M. P., 1976, Detailing for Torsion, ACI Journal, V. 73, No. 9, Sept., pp. 506-511. Mitchell, D., and Collins, M. P., 1978, Influence of Prestressing on Torsional Response of Concrete Beams, PCI Journal, V. 23, No. 3, pp. 54-73. Mrsch, E., 1902, Der Eisenbetonbau, seine Anwendung und Theorie, Wayss and Freytag, A. G., Im Selbstverlag der Firma, Neustadt, a. d.; Haardt, 118 pp. (English translation by E. P. Goodrich, McGraw-Hill Book Co., New York, 368 pp.). Mller, P., 1976, Failure Mechanisms for Reinforced Concrete Beams in Torsion and Bending, Publications, International Association for Bridge and Structural Engineering (IABSE), V. 36-II, Zrich, pp. 147-163. Mller, P., 1978, Platische Berechnung von Stahlbetonscheiben und Balken (Plastic Analysis of Walls and Beams of Reinforced Concrete), Institut fr Baustatik und Konstruktion, ETH Zrich, Bericht Nr 83, Birkhauser Verlag, Basel und Stuttgart, 160 pp. National Association of Cement Users, 1910, Standard Building Regulations for the Use of Reinforced Concrete, NACU Standard No. 4, American Concrete Institute, Farmington Hills, MI, pp. 349-361.