Professional Documents
Culture Documents
Systemmerkmale
Das Schco Parametric System ist die konsequente
Weiterentwicklung der Schco Systemfassaden hin
zu geometrisch frei gestaltbaren dreidimensionalen
Gebudehllen.
Planungsgrundlagen bersicht
Planning guidelines Overview
System features
The Schco Parametric System is the next stage in
the continuous development of Schco system
faades into freeform, three-dimensional geometric
building envelopes.
Design
Design
Energie
Energy
Hochwrmegedmmtes Aluminium-Fassadensystem
mit Uf-Werten bis zu 0,4 W/(mK)
Flchenelemente transparent oder opak zur
Verschattung, optional mit zustzlichen Funktionen.
Automation
Automation
Verarbeitung
Fabrication
Complete Schco 3D fabrication support, including 5axis machine control and installation instructions.
Digital calculation of the cuts and geometries from
the 3D model (file-to-factory fabrication).
06/2015
Page 1 of 6
Design
Detailing
Implementation
Entwurf
Design
Detailierung
Detailing
Ausfhrung
Implementation
06/2015
Page 2 of 6
Planungswerkzeuge
Planning tools
Revit
Revit
3. Parameter - Parametrische
Formfindung:
4. Material Materialdefinition:
06/2015
Page 3 of 6
Planungswerkzeuge
Planning tools
Revit
Revit
Bild 1: Module
Fig. 1: Modules
Bild 2: Gruppen
Fig. 2: Groups
Bild 3: Parameter
Fig. 3: Parameters
Bild 4: Material
Fig. 4: Material
Bild 5: Analyse
Fig. 5: Analysis
06/2015
Page 4 of 6
Planungswerkzeuge
Planning tools
Grasshopper
Grasshopper
(a)
In Selected Type (a), select a faade by doubleclicking and define the parameters for it in the
Overview (b). The "type" field in (b) is populated by
the Selected Type.
2. Geometrie-Check:
2. Geometry check:
3. Statik-Check:
3. Structural check:
4. 3D Geometrie erstellen:
4. Creating 3D geometry:
5. Projektdaten erstellen:
6. Glasaufbau erstellen:
7. Datenkonvertierung:
7. File conversion:
8. Datenexport:
8. Exporting data:
06/2015
Page 5 of 6
Planungswerkzeuge
Planning tools
Grasshopper
Grasshopper
06/2015
Page 6 of 6