Professional Documents
Culture Documents
MeasureMaster
Specifications
Issue/Rev. 0.1 (6/01)
SSOR001
Features
High accuracy Orifice Fitting with greaseless Dry
Seal Plug Valve design guarantees upper chamber
isolation
Simplest operation in the industry, less than half the
operations of other fittings
Technician-friendly design
Fewer moving parts than any other fitting
MeasureMaster Dual Chamber Orifice Fitting
Options
Low Temperature
High Pressure Trim
Stainless Steel Trim
Corrosion Resistant Trim
CO2 Service Trim
Stainless Steel Internals
Accuracy
The MeasureMaster ensures complete measurement
accuracy. It meets all AGA industry specifications and
tolerances. The positive centering of orifice plates eliminates gaps both upstream and downstream of the plate.
Prior to shipment it is tested for positive plate sealing,
pressure tap integrity, and eccentricity. The orifice plate
is seated in a metal carrier to eliminate plate deflection
and seal protrusion into the flow path. For ultimate accuracy, consideration should be given to the purchase
of a factory manufactured Meter Tube assembled to
the Orifice Fitting. This will assure an extra margin of
measurement accuracy by reducing the chance for error in field installation. Alignment, welding and testing
are done in the plant, where these functions can be
preformed quickly, precisely, and economically.
Operating Specifications
Measurement Standards
Size (mm)
2" (50)
3" (80)
4" (100)
6" (150)
8" (200)
10" (250)
12" (300)
14" (350)
16" (400)
18" (450)
20" (500)
24" (600)
End Connections
Weld by Weld
Flange by Flange
Flange by Weld
Flange face per ANSI B16.5 125 250 AARH finish,
Raised Face.
Other flange facings are available on request.
Working Pressure psi (kPa)*
NSI Class 150 285 (1,965)
A
ANSI Class 300 740 (5,102)
ANSI Class 600
1,480 (10,205)
ANSI Class 900
2,220 (15,307)
ANSI Class 1500
3,705 (25,545)
*Maximum working pressure at 100 F (38 C).
Design Code
ASME B31.8 Gas Transmission and Distribution Piping.
NACE MR-01-75 for Pressure bearing and wetted components. Bolting will be NACE Class III-Non-Exposed
bolting.
Also in compliance with:
ASME B31.1 Power Piping.
ASME B31.3 Liquid Petroleum Transportation Piping
Systems.
Page SSOR001
Orifice Plates
The MeasureMaster utilizes FMC Measurement Solutions universal orifice plates which meet or exceed all
recognized measurement standards and are available in
a wide range of alloys to meet specific service requirements. Standard material is 304 Stainless Steel. Other
materials available upon request.
Plate Thickness: 2" to 6" 1/8" (3.18 mm), 8" to 14" 1/4"
(6.35 mm), 16" to 24" 3/8" (9.53 mm).
Plate Finish: Polished to No. 4 finish (15-30 Microinch).
Tolerance per ANSI/API 2530, ASME Fluid Meter Handbook and ISA recommended practices, RP 3.2.
Catalog Code
The following guide defines the MeasureMaster orifice fitting for a given application and the respective catalog code.
This code is part of the ordering information and should be included on the purchase order.
K60
1
1
2
D
Position 1: Model
1 - MeasureMaster
Position 2: Size
A - 2", 50 mm
B - 3", 80 mm
C - 4", 100 mm
D - 6", 150 mm
E - 8", 200 mm
F - 10", 250 mm
G - 12", 300 mm
H - 14", 350 mm
J - 16", 400 mm
K - 18", 450 mm
L - 20", 500 mm
M - 24", 600 mm
Position 3: End Connections
W - Flange by Weld
F - Flange by Flange
X - Weld by Weld
3
W
4
2
5
A
6
R
7
0
8
0
SSOR001 Page
Notes:
MeasureMaster Orifice Fitting Dimensions (in) Cast Steel - Class 150 ANSI-285 P.S.I. (Gage) C.W.P.
Standard RF Flange Facing; Flangeweld; Weld Neck
Size
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
A
10.1
10.4
12.0
10.8
12.8
13.0
17.5
15.5
16.0
20.0
21.2
24.3
B
5.3
5.6
7.0
6.0
7.4
7.4
7.8
7.9
7.8
9.9
10.8
12.6
C
4.7
4.6
4.9
4.6
5.2
5.4
9.4
7.4
7.8
9.8
10.0
11.3
D
3.6
5.0
6.2
8.5
10.6
12.8
15.0
16.3
18.5
21.0
23.0
27.3
E
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
F
.8
.9
.9
1.0
1.1
1.2
1.3
1.4
1.4
1.6
11.7
1.9
G
6.0
7.5
9.0
11.0
13.5
16.0
19.0
21.0
23.5
25.0
27.5
32.0
H
4.0
4.0
8.0
8.0
8.0
12.0
12.0
12.0
16.0
16.0
20.0
20.0
J
.6
.6
.6
.8
.8
.9
.9
1.0
1.0
1.1
1.1
1.3
K
3.3
3.8
3.8
4.0
4.3
4.8
4.8
5.3
5.5
6.0
6.3
7.0
L
4.8
6.0
7.5
9.5
11.8
14.3
17.0
18.8
21.3
22.8
25.0
29.5
M
8.5
7.9
8.9
9.4
11.9
14.8
15.9
16.4
16.6
16.9
19.0
22.6
N
7.5
8.2
8.2
9.8
11.8
13.4
16.2
15.2
17.0
18.5
19.9
22.6
O
3.9
3.8
4.3
5.3
6.9
8.4
9.6
11.1
11.3
12.4
13.0
16.3
P
23.9
25.8
29.3
32..3
37.9
42.3
52.5
53.8
58.1
63.5
70.0
83.5
T
7.4
8.0
9.0
11.1
13.9
16.0
19.9
21.4
23.4
27.0
30.5
37.9
U
2.4
3.5
4.6
6.6
8.9
10.8
12.8
14.0
16.0
18.0
20.0
24.0
Wt.
130
165
200
250
360
520
1,030
950
1,400
1,800
2,400
3,350
U
2.5
3.5
4.6
6.8
8.6
10.8
12.8
14.3
16.3
18.3
20.3
24.0
Wt.
130
165
200
325
465
640
1,030
1,250
1,900
2,500
3,600
4,000
MeasureMaster Orifice Fitting Dimensions (in) Cast Steel - Class 300 ANSI-740 P.S.I. (Gage) C.W.P.
Standard RF Flange Facing; Flangeweld; Weld Neck
Size
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
A
10.1
10.4
12.2
15.8
14.0
15.5
19.0
17.5
22.5
20.0
22.0
24.3
B
5.3
5.6
7.1
7.8
8.2
8.4
9.4
9.0
11.1
9.9
10.8
12.6
C
4.7
4.6
5.0
7.8
5.7
6.9
9.4
8.3
11.1
9.7
10.8
11.3
D
3.6
5.0
6.2
8.5
10.6
12.8
15.0
16.3
18.5
21.0
23.0
27.3
E
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
F
.9
1.1
1.3
1.4
1.6
1.9
2.0
2.1
2.3
2.4
2.5
2.8
G
6.5
8.3
10.0
12.5
15.0
17.5
20.5
23.0
25.5
28.0
30.5
36.0
H
8.0
8.0
8.0
12.0
12.0
16.0
16.0
20.0
20.0
24.0
24.0
24.0
J
.6
.8
.8
.8
.9
1.0
1.1
1.1
1.3
1.3
1.3
1.5
K
3.5
4.3
4.5
5.0
5.5
6.3
6.8
7.0
7.5
7.8
8.3
9.3
L
5.0
6.6
7.9
10.6
13.0
15.3
17.8
20.3
22.5
24.8
27.0
32.0
M
8.2
8.1
8.3
9.4
11.9
14.4
15.9
16.6
16.8
16.9
19.0
22.4
N
7.9
7.9
8.2
9.8
11.8
13.8
16.2
17.0
16.9
18.6
19.9
22.7
O
3.9
4.1
4.8
5.9
6.9
8.4
9.5
10.1
11.3
12.4
13.0
16.5
P
23.9
25.8
29.3
32..3
37.9
42.3
52.5
53.8
60.0
63.5
71.5
86.0
T
7.4
8.0
9.0
11.1
13.9
16.0
20.0
21.4
23.5
26.0
29.5
37.9
Notes: Ring-type joint flange facings available on Class 300 ANSI to Class 1500 ANSI MeasureMaster fittings. Dimensions: Inches to the nearest tenth, each independently dimensioned from respective engineering drawings.
Page SSOR001
Notes:
1 Orifice Plate Thickness:
2 Position of these valves on the
3 Bore to customer
1/8" in sizes 2" - 6"
fitting will vary depending on line
specifications.
1/4" in sizes 8" - 14"
size, pressure rating & date of
3/8" in sizes 16" - 24"
manufacture.
Position of lubricant screw assembly will vary depending on date of manufacture. Lubricant screw not shown for DSV fittings.
MeasureMaster Orifice Fitting Dimensions (in) Cast Steel - Class 600 ANSI-1480 P.S.I. (Gage) C.W.P.
Standard RF Flange Facing; Flangeweld; Weld Neck
Size
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
A
10.5
13.9
12.8
16.8
20.6
19.5
22.0
22.0
22.6
25.1
33.9
30.0
B
5.6
8.4
6.8
8.3
10.4
10.5
11.2
11.3
11.4
12.6
16.9
14.8
C
4.8
5.4
5.9
8.3
10.1
8.8
10.6
10.5
10.9
12.2
16.6
14.8
D
3.6
5.0
6.2
8.5
10.6
12.8
15.0
16.3
18.5
21.0
23.0
27.3
E
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
F
1.3
1.5
1.8
2.1
2.4
2.8
2.9
3.0
3.3
3.5
3.8
4.3
G
6.5
8.3
10.8
14.0
16.5
20.0
22.0
23.8
27.0
29.3
32.0
37.0
H
8.0
8.0
8.0
12.0
12.0
16.0
20.0
20.0
20.0
20.0
24.0
24.0
J
.6
.8
.9
1.0
1.1
1.4
1..3
1.4
1.5
1.6
1.6
1.9
K
4.3
5.0
5.8
6.8
7.8
8.5
8.8
9.3
10.0
10.8
11.5
13.0
L
5.0
6.6
8.5
11.5
13.8
17.0
19.3
20.8
23.8
25.8
28.5
33.0
M
8.3
7.9
8.4
9.4
11.9
14.8
16.0
16.4
16.6
17.0
18.9
22.6
N
7.9
8.3
8.8
9.8
11.9
13.5
16.4
15.9
17.1
18.6
20.0
22.5
O
4.0
4.3
4.8
5.8
7.2
8.5
9.5
10.5
11.3
12.0
14.4
16.5
P
24.0
26.9
29.0
34.1
38.4
46.3
51.4
57.8
62.1
67.5
75.0
87.5
T
7.4
8.0
9.0
11.1
13.9
16.0
18.4
21.4
23.4
27.0
30.5
37.9
U
2.5
3.5
4.6
6.6
8.6
10.8
12.8
14.3
16.3
18.3
20.0
24.4
Wt.
150
200
280
455
630
900
1,140
1,750
2,740
3,250
4,000
5,550
MeasureMaster Orifice Fitting Dimensions (in) Cast Steel - Class 900 ANSI-2220 P.S.I. (Gage) C.W.P.
Standard RTJ Flange Facing; Flangeweld; Weld Neck
Size
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
T
U
W
Pitch Dia.
2" 11.0 5.8 5.8 4.9 .25 1.8 8.5 8.0 .9 5.9 6.5 8.4 7.8 3.9 25.0 7.4 2.5
3.8
3" 14.0 8.1 5.9 6.1 .25 1.8 9.5 8.0 .9 5.9 7.5 8.1 8.0 5.3 27.5 8.0 3.5
4.9
4" 18.5 10.4 7.8 7.1 .25 2.1 11.5 8.0 1.1 7.0 9.3 8.1 9.0 4.3 29.8 9.5 4.6
5.9
6" 26.5 13.0 13.5 9.5 .25 2.5 15.0 12.0 1.1 7.8 12.5 10.5 11.8 7.3 34.8 11.1 6.6
8.9
8" 23.5 12.0 11.5 12.1 .25 2.8 18.5 12.0 1.4 8.8 15.5 11.5 12.3 8.1 43.0 13.9 8.9
10.6
10" 22.0 11.1 10.9 14.3 .25 3.1 21.5 16.0 1.4 9.3 18.5 14.5 16.1 8.9 47.0 16.9 10.8
12.8
12" 26.1 13.1 12.8 16.5 .25 3.4 24.0 20.0 1.4 10.0 21.0 13.8 16.4 10.3 56.0 18.3 12.8
15.0
16" 34.0 17.3 16.8 20.6 .25 3.9 27.8 20.0 1.6 11.3 24.3 19.3 19.6 11.6 60.0 23.1 16.3
18.5
18" 41.5 21.1 20.4 23.4 .25 4.5 31.0 20.0 1.9 12.8 27.0 21.5 21.4 13.8 65.5 26.0 18.3
21.9
20" 41.5 21.1 20.4 25.5 .25 4.8 33.8 20.0 2.0 13.5 29.5 22.1 20.8 14.6 75.6 29.5 20.0
23.0
Ring
No.
R-24
R-31
R-27
R-45
R-49
R-53
R-57
R-66
R-70
R-74
Wt.
185
195
310
1,000
1,080
1,500
2,500
6,200
8,000
9,500
Notes: Ring-type joint flange facings available on Class 300 ANSI to Class 1500 ANSI MeasureMaster fittings. Dimensions: Inches to the nearest tenth, each independently dimensioned from respective engineering drawings.
Issue/Rev. 0.1 (6/01)
SSOR001 Page
Notes:
1 Orifice Plate Thickness:
2 Position of these valves on the
3 Bore to customer
1/8" in sizes 2" - 6"
fitting will vary depending on line
specifications.
1/4" in sizes 8" - 14"
size, pressure rating & date of
3/8" in sizes 16" - 24"
manufacture.
Position of lubricant screw assembly will vary depending on date of manufacture. Lubricant screw not shown for DSV fittings.
MeasureMaster Orifice Fitting Dimensions (in) Cast Steel - Class 1500 ANSI-3705 P.S.I. (Gage) C.W.P.
Standard RTJ Flange Facing; Flangeweld; Weld Neck
Size
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
T
U
W
Pitch Dia.
2" 11.0 5.8 5.8 4.9 .25 1.8 8.5 8.0 .9 5.9 6.5 8.4 7.8 3.9 25.0 7.4 2.5
3.8
3" 14.9 7.9 6.9 6.9 .25 2.2 10.5 8.0 1.1 7.0 8.0 8.1 8.0 5.3 27.5 8.0 3.5
5.4
4" 18.1 10.1 7.9 7.6 .25 2.4 12.3 8.0 1.3 8.0 9.5 8.1 9.0 4.3 29.8 9.5 4.6
6.4
6" 27.3 13.8 13.5 9.8 .25 3.6 15.5 12.0 1.4 10.3 12.5 10.5 11.9 7.3 34.8 11.1 6.6
8.3
8" 24.6 13.6 11.1 12.5 .25 4.1 19.0 12.0 1.6 11.8 15.5 11.5 12.3 8.1 43.0 13.9 8.9
10.6
Ring Wt.
No.
R-24 190
R-35 255
R-39 1,050
R-46 1,050
R-50 2,100
Notes: Ring-type joint flange facings available on Class 300 ANSI to Class 1500 ANSI MeasureMaster fittings. Dimensions: Inches to the nearest tenth, each independently dimensioned from respective engineering drawings.
Headquarters:
500 North Sam Houston Parkway West, Suite 100 Houston, TX 77067 USA, Phone: +1 (281) 260-2190, Fax: +1 (281) 260-2191
Gas Measurement Products:
Houston, TX USA +1 (281) 260-2190
Thetford, England +44 (1842) 82-2900
Kongsberg, Norway +47 (32) 286-700
Buenos Aires, Argentina +54 (11) 4312-4736
Integrated Measurement Systems:
Corpus Christi, TX USA +1 (361) 289-3400
Kongsberg, Norway +47 (32) 286-700
San Juan, Puerto Rico +1809 (787) 274-3760
United Arab Emirates, Dubai +971 (4) 331-3646