You are on page 1of 1

represented by:

measurIT technologies

Portable
Liquid / Gas

Flow Measurement at a Pump Station Flow Meters


for hire

Non-invasive measurement, therefore wear-resistant and not disturbed by sludge and solid particles. Easy
installation and commissioning without pipework and downtimes.

Measuring task Method Medium

? Flow measurement Ultrasound River water

Features Measuring task………………………………………..

Medium: water with high The French waterway network consists of 6700 km of navigable
percentage of sludge channels and rivers. To ensure trouble-free shipping traffic, the level
of the waterways has to be kept as constant as possible. For this
Measuring point: pump station purpose, water is kept on standby in artificial reservoirs in order to
Pipe ø: DN800 supply the channel system with water if necessary. The reservoirs
Material: steel are in turn filled with water by means of pump stations. To measure
the conveyed water and to diagnose any anomalies in the pump
Temperature: ~0 C - 25 C
system, a flow measurement is required.

Solution……………………………………………….

In this case, a non-invasive, clamp-on ultrasonic flowmeter is the


easiest and most suitable solution. Installation and commissioning
does not require any modifications to the pipework and can be done
on the filled pipe without any downtimes. The measurement is not
affected by sludge and solid particles in the conveyed water, unlike
conventional wetted measuring systems where such particles cause
The non-invasive measurement is possible up to clogging and wear.
a nominal diameter of 6500 mm.

Advantages…………………………………………….

Wear-free, non-invasive measurement


Fast installation and commissioning of the meter. No downtimes
are required and it can be installed onto the filled pipe.
Measurements are possible on nominal diameters of 6 to
6500 mm.
High precision even under unfavourable measuring conditions.
Not disturbed by deposits
Robust measuring system: Solidly built transmitters, transducers
The housing and cables of the robust, waterproof and connectors
ultrasonic transducers are made of stainless
steel (standard version is IP65, but IP68 versions Paired, calibrated ultrasonic transducers, with calibration
are also available). certificate.

MeasurIT Technologies Ltd.


Craan, Craanford, email: info@measurIT.com Phone: +353 (0) 53 942 8962
Gorey, Co. Wexford, Ireland www.measurIT.com Fax: +353 (0) 53 942 8963

You might also like