Professional Documents
Culture Documents
A10
VERTICAL MACHINING CENTER
High-rigidity Structure
Headstock, Body, Saddle, Base, and Work Table all use superior grade of cast iron. All are
stress relieved to ensure maximum accuracy and absolute rigidity.
Spindle Headstock Design utilizes box shape design, internally ribbed reinforcement for
highest rigidity maximum stability, ideal for heavy-duty machining.
Two Guide Way base along with wide stance column design greatly increase contact surface
between Column and Machine Base, which reinforce greater head support. Column is heavily
ribbed with cell shaped structure internally to minimize twisting deformation during machining.
X/Y/Z :
1020/560/510mm (40.16"/ 22.05"/ 20.08" )
24 Tool Magazines (BT-40/CAT-40)
8,000 RPM(Belt Driven)
High-rigidity Structure
Long Nose End Belt-Driven Spindle
46
6
560mm
1110mm
The ball-rail linear guide ways along with wide stance column
design greatly increase contact surface between column and
machine base, which reinforce greater head supports.
Roller-rail linear guide ways are also available.(Option)
650mm
1150m
Instead of using a costly chip conveyor, the special three chip augers system efficiently
removes metal chips produced during machining.
63mm
The fluorescent light is installed with the fully enclosed splash guard and it is
located on the left hand corner, and the quartz work light is installed on the right
hand upper corner to provide a well-lit table area.
586mm
510mm
684mm
Linear Guide ways are used on all three axes. Because of their high rigidity, low
noise, and low friction, this helped to achieve high-speed rapid movement and
excellent circular accuracy.
Double nut C3 class precision ballscrews are used on all three axes. Along with
pretension double nut and supports to minimize the backlash and to compensate
for error caused by temperature differences in order to maintain positioning
accuracy.
mm
406
0m
189
24 Tools Magazine
Hinged-Belt Chip
Conveyor (Option)
Control Panel
Chip Remover
Equipment
Calibration with
Laser Interferometer
was Performed and
Certified by PMC
Spindle
A-10
Spindle Taper
No. 40
Transmission
Belt(std)/Direct Driven(opt.)
Spindle Speed
Table
Travel &
Feedrate
r.p.m
8,000/12,000/15,000
Table Size
mm
1,100x560
T-Slot Size
mm
5x18x120
Work Area
mm
1,020x560
kgs
650
X/Y/Z Axis
Distance from Spindle
Nose to Table
Distance from Spindle
Center to Column Ways
Rapid Traverse(X/Y/Z)
mm
1,020x560x510
mm
150-660
mm
624
m/min
32/32/28
m/min
1-10
Tool Shank
BT-40
Pull Stud
Magazine Capacity
Max. Tool Diameter(With
Adjacent Pocket Empty)
Max. Tool Diameter (Full
Storage)
Max. Tool Length
Max. Tool Weight
24
mm
130
mm
80
mm
300
kgs
ATC Type
Kw(HP)
X/Y/Z Axis
Kw(HP)
Lubrication Pump
Machine Weight
Control
460
mm
3.94"(100*5)
22.05"(560)
Floor Space
Misc.
25
w
3.15"
(80)
Coolant Pump
Machine Height
Arm Type
7.5/11(10/15) (Belt)/
5.5/7.5(7.5/10)(Direct)
3/3/4 (4/4/5.5)
2,664
1.22"(31.0)
mm
2,250x2612
kgs
1.26"(32)
0.71"
(18)
Motor
3.15"(80)
Specification is subject to
change without further notice.
40.15"(1020)
6,000
Fanuc 0iMD
0.51"(13)
0.02"(0.5)
29.92"(760)
88.58"(2250)
118.50"(3010)
90.75"(2305)
83.66"(2125)
101.92"(2589)
102.28"(2598)
43.3"(1100)
0.71"(18)
1.26"(32)
3.94"(100x5)
40.15"(1020)
A10: 22.05"(560)
20.07"
(510)
77.56"(1970)
97.44"(2475)
0.02"(0.5)
0.51"(13)
0.71"(18)
86.61"(2200)
116.10"(2949)
5.91"
(150)
20.07(510)
105.04"(2668)
0 90
270
180
1.22"(31)
3.15"(80)
29.49"(749)
104.88"(2664)
77.36"(1965)
77.56"(1970)
3.15"(80)
43.3"(1100)
Optional Accessories:
0.71"
(18)
ATC
Standard Accessories:
Mode
82.87"(2105)
102.87(2612)
Distributor :
11052505
TEL: 04-24733326