You are on page 1of 3

Sweet Dreams Socks

Dream In Color Designs


by Monica Nappe

Materials:
1 skein of Dream in Color Smooshy Sock,
450 yards (sample knit with color #230 -
Deep Seaflower)
1 set US #2/2.5 mm double-point needles OR circular
needle(s). NOTE: Adjust needle size to get the cor-
rect gauge.
Stitch marker
Cable Needle
Tapestry Needle

Gauge:
7 stitches ≈ 1 inch

Abbreviations:
K=Knit
P=Purl
YO=Yarnover
SSK=Slip 2 stitches as if to knit then knit those 2
stitches together
K2 Tog=Knit 2 stitches together
SK2P=Slip 1 stitch as if to knit, knit 2 stitches togeth-
er, pass slipped stitch over the stitches you just knit
6-st RC=Slip next 3 stitches to a cable needle and
hold in front of work, knit 3 stitches from left needle,
knit 3 stitches from cable needle
6-st LC=Slip next 3 stitches to a cable needle and
hold in back of work, knit 3 stitches from left needle,
knit 3 stitches from cable needle
TBL=through back loop

Lace Cable Twist Pattern on LEG:


Row 1: Knit
Row 2: (*YO, SSK, K1, K2 Tog, YO, K6) repeat
from * 6 times
Row 3: Knit
Row 4: K1, (*YO, SK2P, YO, K1, 6-st RC, K1) re-
peat from * 5 times, YO, SK2P, YO, K1, 6-st RC
Row 5: Knit
YO, K6) repeat from * 2 times, YO, SSK
Row 6: (*YO, SSK, K1, K2 Tog, YO, K6) repeat
Row 3: Knit
from * 6 times
Row 4: K2 Tog, YO, 6-st RC, K1, YO, SK2P, YO,
Row 7: Knit
K1, 6-st RC, K1, YO, SK2P, YO, K1, 6-st RC, YO,
Row 8: K1, (*YO, SK2P, YO, K8) repeat from * 5
SSK
times, YO, SK2P, YO, K7
Row 5: Knit
Row 6: K2 Tog, YO, K6 (*YO, SSK, K1, K2 Tog,
YO, K6) repeat from * 2 times, YO, SSK
Lace Cable Twist Pattern on FOOT: Row 7: Knit
Row 1: Knit Row 8: K2 Tog, YO, K7, YO, SK2P, YO, K8, YO,
Row 2: K2 Tog, YO, K6 (*YO, SSK, K1, K2 Tog, SK2P, YO, K7, YO, SSK
1
Instructions: Row 13: Slip 1 stitch, purl 16 stitches, purl 2 stitches
Leg together, purl 1 stitch and turn.
Cast on 66 stitches. Row 14: Slip 1 stitch, knit 17 stitches, knit 2 stitches
Put 16 stitches on Needle 1, 17 stitches on Needle 2, 16 together, and knit 1 stitch.
stitches on Needle 3 and 17 stitches on Needle 4. Join
in the round and add a stitch marker to indicate begin- You should have 20 stitches left on your needle.
ning of round. Make sure you do not twist your join.
Work K1, P1 ribbing for 1 inch. Gusset
Knit Lace Cable Twist Pattern until leg measures 6 On left side of heel flap, pick up and knit 15 stitches
inches long including the ribbing. End pattern at Row with one needle.
5. With another needle knit foot pattern starting at Row
6 on needles 1 and 2.
Heel Flap With the next needle, pick up and knit 15 stitches
Move stitches for heel flap as follows: along the ride side of the heel flap. Knit 10 stitches of
K3 stitches onto needle 4 and turn. the heel stitches with the same needle. Slip the other
Slip 1, P 33 stitches, move 2 leftover stitches to needle half of the heel stitches onto first needle that contains
2. the stitches you picked up for the left side of the heel
You should have 34 stitches on one needle for the heel flap. You should have 50 stitches on the heel stitches
and 13 stitches on needle 1 and 19 stitches on needle 2. and 32 stitches of the foot pattern for a total of 82
The 32 stitches will be left on hold until the heel flap is stitches on all needles.
complete.
Gusset Decreases
The heel is worked back and forth using needles 3 and Round 1: K10, K12 TBL, K2 Tog TBL, K1 TBL,
4 as follows: Knit Row 7 of foot pattern, K1 TBL, SSK, K12 TBL,
Row 1 (right side): [slip 1 stitch, knit 1 stitch] to end K10. You should be at center back heel.
Row 2 (wrong side): Slip 1 stitch, purl to end. Round 2: K24, Knit Row 8 of foot pattern, K24.
Round 3: Knit to the last 3 stitches, K2 Tog, K1,
Repeat these 2 rows until heel measures 2 inches end- Knit Row 1 of foot pattern, K1, SSK, Knit to end of
ing with Row 1 just completed. needle.

Turn Heel Continue decreasing in this manner, every other


Row 1: Purl 19 stitches, purl 2 stitches together, purl 1 round until you have 32 stitches remaining on the
stitch and turn. heel, 9 sets of decreases worked on each side.
Row 2: Slip 1 stitch, knit 5 stitches, knit 2 stitches
together, knit 1 stitch and turn. Knit until 1½ inches less than desired length of foot.
Row 3: Slip 1 stitch, purl 6 stitches, purl 2 stitches End pattern with a knit row—Row, 1, 3, 5 or 7.
together, purl 1 stitch and turn.
Row 4: Slip 1 stitch, knit 7 stitches, knit 2 stitches Toe
together, knit 1 stitch and turn. Round 1: K to last 3 stitches on Needle 1, K2 Tog,
Row 5: Slip 1 stitch, purl 8 stitches, purl 2 stitches K1; K1, SSK, knit to last 3 stitches on Needle 2. K
together, purl 1 stitch and turn. to last 3 stitches on Needle 3, K2 Tog, K1; K1, SSK,
Row 6: Slip 1 stitch, knit 9 stitches, knit 2 stitches knit to end of Needle 4.
together, knit 1 stitch and turn. Round 2: Knit all stitches
Row 7: Slip 1 stitch, purl 10 stitches, purl 2 stitches
together, purl 1 stitch and turn. Repeat these 2 rounds 9 more times until you have
Row 8: Slip 1 stitch, knit 11 stitches, knit 2 stitches 6 stitches left on Needle 1, 6 stitches on Needle 2, 6
together, knit 1 stitch and turn. stitches on Needle 3 and 6 stitches on Needle 4 for a
Row 9: Slip 1 stitch, purl 12 stitches, purl 2 stitches total of 24 stitches.
together, purl 1 stitch and turn. Using Needle 4, knit to last stitch of Needle 1 so that
Row 10: Slip 1 stitch, knit 13 stitches, knit 2 stitches you have 12 stitches on Needle 4.
together, knit 1 stitch and turn. Move stitches on Needle 3 onto Needle 2 so that you
Row 11: Slip 1 stitch, purl 14 stitches, purl 2 stitches have 12 stitches on Needle 2.
together, purl 1 stitch and turn. Break yarn, leaving 12-inch tail.
Row 12: Slip 1 stitch, knit 15 stitches, knit 2 stitches Graft stitches on Needle 2 to stitches on Needle 3.
together, knit 1 stitch and turn.
2
Grafting the toe of the sock:
Draw the 12-inch tail through the eye of the tapestry
needle.
Hold Needles 2 and 3 together with right sides of the
sock facing.
Step 1: Draw the yarn through the first stitch on the
front needle as if to purl and leave the stitch on the
needle.
Step 2: Draw the yarn through the first stitch on the
back needle as if to knit and leave the stitch on the
needle.
Step 3: Draw the yarn through the first stitch of the
front needle as if to knit and remove the stitch from
the needle.
Step 4: Draw the yarn through the next stitch on the
front stitch as if to purl and leave stitch on needle.
Step 5: Draw the yarn through the first stitch on the
back needle as if to purl and remove the stitch from
the needle.
Step 6: Draw the yarn through the next stitch on the
back needle as if to knit and leave the stitch on the
needle.

Repeat steps 3, 4, 5 and 6 until you do not have any


stitches left on both needles.

Knit the second sock in the same pattern but substi-


tute the 6-st LC for the 6-st RC.

Tip:
When you knit the second sock you can count the
number of cables you’ve made on the first sock to
know when to stop the leg and start the heel. When
you’re ready for the toe you can count the total num-
ber of cables you’ve knitted for the first sock so you
know when to start the toe decreases.

Note: If you think the cables will be too bumpy on the


foot of the sock when you wear the socks with shoes,
K6, instead of cabling. So Row 4 of the Lace Cable
Pattern on foot will be the same as Row 8:

This cable and lace pattern is from Nicky Epstein’s


Knitting on the Edge.

Dream In Color
4024 Fox Valley Center Drive
Aurora, IL 60504
www.dreamincoloryarn.com
630.673.0964

You might also like