Professional Documents
Culture Documents
08-05-2013
Table of contents
EC- Declaration of Conformity ..................................................................................................................4
Machine description ....................................................................................................................................5
Range of application ..................................................................................................................................5
Technical specifications.............................................................................................................................5
Delivery check ..............................................................................................................................................6
Preparation of the machine ........................................................................................................................6
Safety instructions .......................................................................................................................................7
Safety and instructions for hydraulics .......................................................................................................8
Labels on the machine .................................................................................................................................9
Start-up .......................................................................................................................................................10
General information .................................................................................................................................10
Attachment (rigid lift-mounted machines) ..............................................................................................10
Uncoupling (rigid lift-mounted machines) ..............................................................................................10
Attachment (rigid trailed machines) ........................................................................................................10
Uncoupling (rigid trailed machines) ........................................................................................................10
Settings and adjustment ............................................................................................................................11
Roller depth adjustment ...........................................................................................................................11
Scraper .....................................................................................................................................................11
Maintenance ...............................................................................................................................................12
Lubrification ............................................................................................................................................12
Spare parts .................................................................................................................................................13
Frame 3.0 and 3.5 m (rigid) .....................................................................................................................13
Harrow tine ..............................................................................................................................................14
Roller bar 3.0 and 3.5.m (rigid) ...............................................................................................................16
Roller 3.0 and 3.5 m (rigid) .....................................................................................................................18
Scraper .....................................................................................................................................................20
Tine track eradicator ................................................................................................................................22
Extra equipment ........................................................................................................................................24
Eradicator disc .........................................................................................................................................24
Wearing point (Quick change adapter) ....................................................................................................26
Lights .......................................................................................................................................................27
Trailed kit 3 3.5 m (rigid) .....................................................................................................................28
Edge equipment w/tine eradicator ...........................................................................................................30
Edge equipment w/disc eradicator ...........................................................................................................31
Support wheels.........................................................................................................................................32
Hydraulics ..................................................................................................................................................34
Triple-Tiller
08-05-2013
Triple-Tiller
08-05-2013
HE-VA ApS
N. A. Christensensvej 34,
DK-7900 Nykbing Mors
hereby confirms that the following machine has been manufactured in accordance with the Council
Directive 2006/42/EC.
Triple-Tiller
3,0 / 3,5 m (rigid)
No. _____________
Villy Christiansen
The undersigned is furthermore authorized to compile technical documentation for the above machine.
Triple-Tiller
08-05-2013
Machine description
Range of application
HE-VA Triple-Tiller stubble harrow is available in 3,00 m and 3,50 m working width as rigid models and
4 m and 5 m working width with hydraulic folding (transport width 3,00 m). All models are available as
lift-mounted or trailed with a row spacing of only 25 cm. The 3 rows of tines are mounted on a solid
frame at a height of 85 cm and with 70 cm interval. The tine spacing is 75 cm.
Triple-Tiller is supplied standard with 75x12 mm reversible and adjustable wearing points, and the
unique double-spring tine, preloaded for 455 kg. The "Quick change system" is available as extra
equipment, and with the choice of chisel points or 260 mm wide wing shares. Behind the harrow section,
the Triple-Tiller has disc eradicators or the optional tine eradicator - both with centre spindle
adjustment. There are 3 choices for rear-mounting: 550 mm square tube roller, 600 mm T-profile roller
or 600 mm V-profile roller.
Technical specifications
Model:
Working width
Transport width
Machine length
Power requirement
No. of double-acting outlets
No. of tines
Lift-mounted
Trailed
3,0 m.
3,5 m.
3,0 m.
3,5 m.
3,0 m.
3,5 m.
3,0 m.
3,5 m.
3,6 m
3,6 m
6,7 m
6,7 m
100-200HP 120-240HP 100-200HP 120-240HP
0
0
1
1
12 pcs.
14 pcs.
12 pcs.
14 pcs.
Weight:
Square tube roller 550 mm
1850 kg.
2135 kg.
2430 kg.
2715 kg.
2200 kg.
2545 kg.
2780 kg.
3125 kg.
2470 kg.
2860 kg.
3050 kg.
3440 kg.
Wheels
Tyre pressure
Hydraulic pressure (minimum)
Oil type
Voltage
Working speed
Triple-Tiller
08-05-2013
Delivery check
Preparation of the machine
Check :
Triple-Tiller
08-05-2013
Safety instructions
Do not start-up the machine if there are persons in exposed positions** within a hazardous area*.
When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment and
uncoupling), the following conditions must be observed:
1.
2.
3.
The tractor must be stopped and the key removed from the ignition switch.
4.
The driver must ensure that no persons are staying in exposed positions during the operation.
*
**
Hazardous area: On and under the machine within a distance of 10 m from the machine.
Person in exposed position: Any person who is staying wholly or partly within a hazardous area.
Most accidents that happen in connection with the operation, transport and maintenance of machines are
caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety instructions
as well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this work
and who are further familiar with the possible elements of danger with this particular machine.
IMPORTANT !! In connection with the risk of parts falling down, it may endanger the lives of
persons staying on the base frame of the machine, when it is operated attached to
a tractor.
Triple-Tiller
08-05-2013
NB! The driving, controlling and braking properties are affected by the attached machine
combination.
Triple-Tiller
08-05-2013
Explanation:
A
Triple-Tiller
08-05-2013
Start-up
General information
Rigid models require 0 1 double-acting oil outlets (see technical specifications p. 5)
Lower the machine onto level, firm ground, and release all hydraulic hoses.
2.
3.
2.
3.
Apply pressure to the drawbar-wheel cylinder until the drawbar reaches the right height.
4.
5.
Lift the machine to maximum height and lift the support leg.
2.
3.
Adjust the drawbar-wheel cylinder (red), so that the drawbar pin is loosened
4.
5.
10
Triple-Tiller
08-05-2013
Scraper
Triple-Tiller is fitted with scrapers of special steel
in between the rings of the V-profile roller.
Check their centering daily, so they do not wear
unnecessarily, and to ensure optimal effect.
The correct height adjustment is 1-2 mm from
the bottom of the roller.
11
Triple-Tiller
08-05-2013
Maintenance
After the season all lubricating points must be lubricated, then wash and lubricate the machine. Do
not use high-pressure water directly on ball bearings. After washing it, you may spray the machine
with a rust preventive oil.
Lubrification
When lubricating, maintaining and repairing the Triple-Tiller, always lower the machine, brake the tractor
and stop the engine.
The typical lubricating points are: by the roller, spindle, side section and the arms of the roller bar. The
lubricating points must be lubricated after 10 hours of operation, and before/after cleaning in order to
drive out any water or dirt. The lubricating points are placed by movable parts, as well as by the ball
bearings and cylinders.
X = Lubrication point
Note!
The double density ball bearings in the roller should only be lubricated every 20 hours,
and with 1-2 strokes so as not to press out the sealing rings.
IMPORTANT!
The hydraulic system is filled with oil type Hydro Texaco HD32
12
Triple-Tiller
08-05-2013
Spare parts
Frame 3.0 and 3.5 m (rigid)
Pos.
1
1
2
3
4
5
6
Item no.
1160097
1160149
1140600
0378650
1140361
0378600
690200664
690200665
690200666
690200667
690200668
1069950
Designation
Frame
Frame
Pin 37x150
Ring split 10x42
Pin 32x175
Ring split 11x40
Distance clip 6.2 mm, blue
Distance clip 9.4 mm, red
Distance clip 18.8 mm, yellow
Distance clip 31.6 mm, black
Distace clip 50.8.mm, silver
Disc 33
13
3m
1
3.5 m
2
2
1
1
1
2
2
1
1
Triple-Tiller
Harrow tine
14
08-05-2013
Triple-Tiller
Pos.
Item no.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
0424601
0424602
0424603
0424604
0424605
0424606
0424607
0424608
0424609
0424610
0424611
0424612
0424613
0424614
0424615
0424616
0424617
0424618
0424619
0424620
0424621
0424622
0424623
0424624
0424625
0424626
0424627
0424628
0424629
0424619
32
0424330
32
0424340
32
0424330
32
0424340
Shank
Holder for shank
Tine attachment
Side plate for shank, Left
Side plate for shank, Right
Spring
Spring retainer
Clamping bracket
Carrier bolt 3/4NC-2A
Pivot bolt
Steel set screw 5/8NCx4
Steel set screw 5/8NCx2-3/4
Steel set screw 5/8NCx3-1/2
Steel set screw 3/4NCx2-1/4
Facet plate 3/4
Carrier bolt 5/8NCx1-1/2
Facet plate 1/1
Steel bolt 1NCx4
Steel nut 3/4
Steel nut 1/1
Distance bush 9/16x1
Facet plate 5/8
Steel nut 5/8
Bush
Facet plate 3/4
Bush
Facet plate 3/8
Steel nut 5/8
Spring bracket
Steel nut 3/4
Standard point incl. bolt and nut (left)
(8 pcs per machine 3,0m)
Standard point incl. bolt and nut (right)
(4 pcs per machine 3,0m)
Standard point incl. bolt and nut (left)
(9 pcs per machine 3,5m)
Standard point incl. bolt and nut (right)
(5 pcs per machine 3,5m)
0424300
15
08-05-2013
No. per
tine
1
1
1
1
1
2
1
1
1
1
1
2
1
4
2
2
2
2
1
1
2
4
4
2
4
2
2
1
2
2
1
1
1
1
Triple-Tiller
16
08-05-2013
Triple-Tiller
Pos.
1
1
2
3
4
5
6
7
8
9
Item no.
1160103
1160403
1160486
69430095G
1160155
69440165G
630532600
0235330
690136001
0432510
Designation
Levelling bar
Levelling bar
Cylinder
Pin 30 L=95
Pin 30 L=165
Pin 40 L=165
Lock bush for pin head
Bolt M12x25mm 8.8
Lubricating nipple M6
Lubricating nipple M8
08-05-2013
3m
1
2
2
2
2
6
6
2
2
17
3.5 m
1
2
2
2
2
6
6
2
2
Triple-Tiller
18
08-05-2013
Triple-Tiller
Designation
08-05-2013
Pos.
Item no.
3m
678612935
Axle 60x2935
678613435
Axle 60x3435
1069111
T-profile ring
20
24
1048100
1048240
1048280
630916300
1
1
1160470
630916350
1160480
3.5 m
1
1
1160201
1160202
645000411
Shim
10
0235040
11
12
0264110
0272310
13
0236140
690140808
19
Triple-Tiller
Scraper
20
08-05-2013
Triple-Tiller
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Item no.
1160433
1160431
1160566
1160567
1160536
1160537
690110106
0272290
0264090
0422450
0422450
0422452
0422452
630938522
0235450
0272270
0264070
630938505
630938506
690110025
630937517
0272260
0264060
Designation
Scraper bar (V-profile roller) (to machine no. 29175)
Scraper bar (V-profile roller) (to machine no. 29175)
Scraper bar (V-profile roller) (from machine no. 29176)
Scraper bar (V-profile roller) (from machine no. 29176)
Scraper bar (T-profile roller)
Scraper bar (T-profile roller)
U-bolt M16x200x100x200
Facet plate 16
Self-locking nut M16
Scraper long (T-profile roller)
Scraper long (V-profile roller)(from machine no. 29176)
Scraper short (T-profile roller)
Scraper short (V-profile roller)(from machine no.29176)
Clamp 50x70 f/scraper 32/21
Bolt M12x90mm
Facet plate 12
Self-locking nut M12
Scraper single (v-profile roller) (to machine no. 29175)
Scraper double (v-profile roller) (to machine no. 29175)
U-bolt M10x50x70x50mm
Clamping plate
Facet plate 10
Self-locking nut M10
21
08-05-2013
3m
1
3.5 m
1
1
1
1
4
8
8
22
19
2
2
24
24
24
24
1
11
23
23
46
46
1
4
8
8
23
22
2
2
25
25
25
25
1
13
27
27
54
54
Triple-Tiller
22
08-05-2013
Triple-Tiller
Pos.
Item no.
1160387
Levelling bar
1160400
Levelling bar
1160325
Spindle
0236260
0272310
Facet plate 20
0264110
6
7
0236170
Designation
08-05-2013
3m
3.5 m
1
1
10
0422420
10
0422421
11
0422424
12
0381260
16
16
13
0264070
Self-locking nut 12
26
26
14
0422375
15
0235470
16
0272270
16
16
17
1160560
Bush 30x5mm
23
Triple-Tiller
Extra equipment
Eradicator disc
24
08-05-2013
Triple-Tiller
Pos.
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Varenr.
Item no.
1139870
1139871
1139872
30949046
690103091
0272270
0264070
690210710
630949019
690140651
0379250
690140201
30949030
690117062
0263000
0483730
0427791
0248421
0272260
0264060
1139860
1139861
1139862
630949035
Betegnelse
Designation
Carrier arm (R + L)
Carrier arm (R)
Carrier arm (L)
Clamping plate
Steel bolt M12x45 10.9
Facet plate M12
Self-locking nut M12
Rubber cord
Disc 45/71,7
Seal 72
Seeger circlip ring I 72
Bearing 35
Hub
Disc 20
Lock nut M20
O-ring 80/3
Serrated disc 400 with 6 holes
Carrier bolt M10x30
Facet plate 10
Self-locking nut M10
Complete carrier arm (R +L)
Complete carrier arm (R)
Complete carrier arm (L)
Repair outfit/conversion set incl. hub (no: 7 14)
25
08-05-2013
3m.
3m.
3
1
1
5
30
60
30
20
8
8
8
8
8
8
8
8
8
48
48
48
-
3,5m.
3,5m.
3
1
1
5
30
60
30
20
8
8
8
8
8
8
8
8
8
48
48
48
-
Triple-Tiller
08-05-2013
Pos.
Item no.
0424480
0424490
0424480
0424490
1139890
0424350
0424360
0424450
0424402
0381300
0272620
2
3
4
5
6
7
8
Designation
Twisted mould board (L)
Twisted mould board (R)
Twisted mould board (L)
Twisted mould board (R)
Straight mould board
Adapter
Retaining spring
Chisel point 75 mm
Wing share 260 mm
PB-bolt M12x70 w/nut
Disc 13/37x3 mm
26
No. per
tine
1
1
1
1
1
1
1
1
1
1
1
Triple-Tiller
08-05-2013
Lights
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
Item no.
30910110
0230825
30930110
0234330
0272240
0264040
1043480
1043510
0527000
0527010
0656260
0656250
0527040
0243000
0656240
Designation
Bracket
Screw Tapetite M8x25mm
Bracket
Set screw M6x20 mm
Facet plate 6
Self-locking nut M6
Light bracket (L)
Light bracket (R)
Rear light (L)
Rear light (R)
Reflector, red
Reflector,white
Marking lights
Machine screw M6x20 mm
Reflector, yellow
27
No.
2
4
2
8
20
10
1
1
1
1
2
2
2
4
2
Triple-Tiller
28
08-05-2013
Triple-Tiller
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Item no.
1160182
0396110
0396130
0396100
690141055
0521010
1160119
0382160
0272290
0264090
0432100
0475330
1160174
630532600
0235330
1160178
1160172
1160414
1140361
0378600
1145309
1160124
1140600
0378650
630757028
690141211
690103130
Designation
Wheel frame
Wheel rim
Tyre 11,5/80 x 15,3
Complete wheel
Hub nut M18x1,5
Warning triangle with bracket
Bracket
U-bolt M16 100x100
Facet plate M16
Self-locking nut M16
Lubricating nipple M6
Bush EG 50/40x40mm.
Pin 40x420
Bush 13
Steel set screw M12x25
Hydr. cylinder
Pin 40x145
Hydr. cylinder
Pin 30x175
Ring split 11x40
Pin 40x125
Towing bar
Pin 37x150
Ring split 10x42
Draw unit w/pivotal towing eye 50
Towing eye 50, pivotal for welding
Bolt M16x70 10.9
29
08-05-2013
No.
1
2
2
2
12
1
1
6
16
8
2
2
1
3
3
1
1
1
2
2
1
1
2
2
1
1
Triple-Tiller
08-05-2013
Pos.
1
2
3
4
5
6
7
8
9
10
11
Item no.
1139830
1139800
0248660
0261370
0422375
0422421
0422420
0235470
0272270
0264070
0422424
0381260
Designation
Inner tube f/edge equipment
Outer tube f/edge equipment
Carrier bolt M12x40mm
Nut M12
Tine holder f/ 60x10mm tine
Levelling tine w/wearing point 60x10mm (R) (shown)
Levelling tine w/wearing point 60x10mm (L)
Bolt M12x110
Facet plate M12
Self-locking nut M12
Wearing part
PB-bolt M12x35 incl. nut
30
No.
2
2
6
6
2
1
1
2
2
2
2
4
Triple-Tiller
08-05-2013
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Item no.
1139830
1139800
0248660
0261370
0422390
0422144
0235480
0272270
1139850
1139840
630949019
690140651
0379250
690140201
30949030
690117062
0263000
0483730
0427791
0248421
0272260
0264060
Designation
Inner tube f/edge equipment
Outer tube f/edge equipment
Carrier bolt M12x40mm
Nut M12
Tine holder f/ 80x10mm tine
Tine 80x10mm
Bolt M12x120mm
Facet plate 12
Bracket w/axle (R)
Bracket w/axle (L)
Disc 45/71,7
Seal 72
Seeger circlip ring I 72
Bearing 35
Hub
Disc 20
Lock nut
O-ring 80/3
Serrated disc 400x5,0 mm
Carrier bolt M10x30mm
Facet plate 10
Self-locking nut M10
31
No.
2
2
6
8
2
2
2
2
1
1
2
2
2
2
2
2
2
2
2
12
12
12
Triple-Tiller
Support wheels
32
08-05-2013
Triple-Tiller
Pos
1
2
3
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Item no.
0394700
0394860
0394861
0394850
1145390
1145393
0474100
0483585
630949019
1145391
1160255
0236332
0272310
0234110
0236570
0272330
0264130
0489620
0237070
0272350
0264155
1160425
1160462
0235840
0272290
0264090
1145342
1145346
0470500
1145341
0652550
1036260
0371660
0431980
0272310
0264110
1145502
Designation
Wheel (complete) 10.0/80x12 10 PLY
Hub bolt M12x1,5x36 mm
Nub nut M12x1,5 NV22mm
Hub (complete) pos. 4-9
Hub
Distance sleeve
Ball bearing 5206-2RS YC
Oil sealing ring 45/62x7
Disc 45/71,7
Axle for hub
Yoke for support wheel
Bolt M20x400mm 8.8
Facet plate 20 mm
Self-locking nut M20
Bolt M24x400mm 8.8
Facet plate 24 mm
Self-locking nut M24
Plastic plug
Bolt M30x180mm 8.8
Facet plate 30 mm
Self-locking nut M30
Guide for support wheel
Spindle holder for support wheel
Bolt M16x60mm 8.8
Facet plate 16
Self-locking nut M16
Inner tube
Spindle
Shaft bearing 20mm
Outer tube
Transfer, scale 1-11
Crank
Roll pin 8x32mm
Spindle keeper
Facet plate 20mm
Self-locking nut M20
Spindle complete (pos 26-34)
33
08-05-2013
3,0m
2
10
10
2
2
2
4
4
4
4
2
2
4
2
2
4
2
4
4
8
4
2
2
16
32
16
2
2
2
2
2
2
2
2
2
2
3,5m
2
10
10
2
2
2
4
4
4
4
2
2
4
2
2
4
2
4
4
8
4
2
2
16
32
16
2
2
2
2
2
2
2
2
2
2
Triple-Tiller
Hydraulics
Trailed kit 3 3.5 m (rigid)
34
08-05-2013
Triple-Tiller
Pos.
1
2
3
4
5
6
7
8
9
10
11
Item no.
1160178
1160414
0444020
0449070
0444490
0454550
0446610
0449050
0444510
0454560
0454590
Designation
Hydraulic cylinder
Hydraulic cylinder
Quick coupling
Bounded seal
Hexagon nipple -
Hose 1700mm.
T-nipple
Bounded seal
Hexagon nipple -
Hose 1850mm.
Hose 2000mm.
35
08-05-2013
No.
1
1
2
2
2
2
2
4
4
2
2
Triple-Tiller
Notes
36
08-05-2013
Triple-Tiller
37
08-05-2013
Triple-Tiller
38
08-05-2013
Triple-Tiller
39
08-05-2013
Triple-Tiller
40
08-05-2013