Professional Documents
Culture Documents
iConverter SFP-NIDTM
KEY FEATURES
Gigabit SFP Demarcation Device
Less than 1.5W power consumption
Low-latency cut-through flow processing
Configuration and Recovery requires no external equipment
IEEE 802.1ag End-to-End Fault Management (FM)
3.3msec Continuity Check Messages (CCM)
ITU-T Y.1731 Performance Monitoring (PM)
Initiator and Reflector
TWAMP Reflector
RFC 2544 Ethernet Service Testing
Initiator and Responder
ITU-T Y.1564 Ethernet Service Activation Testing (SAT)
APPLICATION EXAMPLE
SPECIFICATIONS
Description
iConverter SFP-NID
1000BASE-LX Transceiver Network Interface Device
Standard
Compliances
MSA SFF-8472
IEEE 802.1ag
ITU-T Y.1564, Y.1731
RFC 2544, 5357
MEF 9, 14, 21, 30, 31
Regulatory
Compliances**
Management
Frame Size
10,240 bytes
Port Type
Cable Type
Fiber:
1000BASE-LX (LC)
Fiber:
Single-mode: 9/125um
DC Input:
(SFP Receptacle)
DC Power
Requirements
Operating
Case
Temperature
-40 to 85 C
Storage
Temperature
-40 to 85 C
Dimensions
Weight
0.736oz. (21g)
Humidity
5% to 95% (non-condensing)
Altitude
Fiber
Type
Spec.
Distance
(km)
Wavelength
(nm)
Min/Max
Tx Power
(dBm)
SM/DF
10
1310
-9.5 / -3
Min/Max
Link
Attenation
Rx Power
Budget
(dB)
(dBm)
(dB)
-21 / -3
11.5
** Compliances pending
ORDERING INFORMATION
Model Number
Description
7207N-1
2015 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are registered trademarks of Omnitron Systems Technology, Inc.
SPF-NID is a trademark of Omnitron Systems Technology, Inc. Trademarks are owned by their respective companies.
Specifications subject to change without notice.
091-7200N-001-D 11/15