Professional Documents
Culture Documents
E3F2
E3F2
E3F2
Ordering Information
DC-switching Models with Plastic Housing
Operating
modes
Connection
method
Control
output
---
Pre-wired
N. A.
Through-beam
7m
IEC60529 IP66
Emitter only
E3F2-7L
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
NPN
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DC4
Pre-wired
PNP
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DB4
Pre-wired
NPN
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7C4
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7B4
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2C4
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2B4
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2C4-E*1
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2B4-E*1
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10C4-N*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10B4-N*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30C4
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30B4
---
Connector
N. A.
Through-beam
7m
IEC60529 IP66
Emitter only
E3F2-7L-P1
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
NPN
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DC4-P1
Connector
PNP
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DB4-P1
Connector
NPN
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7C4-P1
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7B4-P1
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2C4-P1
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
PNP
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2B4-P1
Connector
NPN
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2C4-P1-E*1
Connector
PNP
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2B4-P1-E*1
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10C4-P1*2
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10B4-P1*2
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30C4-P1
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30B4-P1
Note:
Sensing
method
Sensing
distance
Degree of
protection
Remarks
Model
E3F2
E3F2
DC-switching Models with Metal Housing
Nickel-brass Housing Models
Operating
mode
Connection
method
Control
output
Sensing
method
Sensing
distance
Degree of
protection
Remarks
Model
---
Pre-wired
N. A.
Through-beam
7m
IEC60529 IP66
Emitter only
E3F2-7L-M
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
NPN
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DC4-M
Pre-wired
PNP
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DB4-M
Pre-wired
NPN
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7C4-M*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7B4-M*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RC4-M*2
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RB4-M*2
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RC4-M-E*1
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RB4-M-E*1
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10C4-M*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10B4-M*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30C4-M*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30B4-M*2
---
Connector
N. A.
Through-beam
7m
IEC60529 IP66
Emitter only
E3F2-7L-M1-M
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
NPN
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DC4-M1-M
Connector
PNP
Through-beam
7m
IEC60529 IP66
Receiver only
E3F2-7DB4-M1-M
Connector
NPN
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7C4-M1-M*2
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Through-beam
7m
IEC60529 IP66
Receiver and
Emitter
E3F2-7B4-M1-M*2
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RC4-M1-M*2
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
PNP
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RB4-M1-M*2
Connector
NPN
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RC4-M1-M-E*1
Connector
PNP
Retroreflective
2m
IEC60529 IP66
Polarized
E3F2-R2RB4-M1-M-E*1
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10C4-M1-M*2
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10B4-M1-M*2
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30C4-M1-M*2
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30B4-M1-M*2
---
Pre-wired
N. A.
Through-beam
7m
IEC60529 IP67
Emitter only
E3F2-7L-C
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
NPN
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DC4-C
Pre-wired
PNP
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DB4-C
Pre-wired
NPN
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7C4-C*2
E3F2
E3F2
Operating
mode
Connection
method
Control
output
Degree of
protection
Remarks
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7B4-C*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-C*2
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-C*2
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-C-E*1
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-C-E*1
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10C4-C*2
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10B4-C*2
---
Connector
N. A.
Through-beam
7m
IEC60529 IP67
Emitter only
E3F2-7L-M1-C
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
NPN
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DC4-M1-C
Connector
PNP
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DB4-M1-C
Connector
NPN
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7C4-M1-C*2
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7B4-M1-C*2
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-M1-C*2
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-M1-C*2
Connector
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-M1-C-E*1
Connector
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-M1-C-E*1
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10C4-M1-C*2
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10B4-M1-C*2
Note:
Sensing
method
Sensing
distance
Model
Connection
method
Control
output
---
Pre-wired
N. A.
Through-beam
7m
IEC60529 IP67
Emitter only
E3F2-7L-S
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
NPN
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DC4-S
Pre-wired
PNP
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DB4-S
Pre-wired
NPN
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7C4-S
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7B4-S
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-S
Light-ON/
g
D k ON
Dark-ON
(selectable)
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-S
Pre-wired
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-S-E*1
Pre-wired
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-S-E*1
Pre-wired
NPN
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10C4-S
Light-ON/
Dark-ON
(selectable)
Sensing
method
Sensing
distance
Degree of
protection
Remarks
Model
E3F2
E3F2
Operating
modes
Connection
method
Control
output
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10B4-S
Light-ON/
Dark-ON
(selectable)
Pre-wired
NPN
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30C4-S
Light-ON/
Dark-ON
(selectable)
Pre-wired
PNP
Diffuse
reflective
0.3 m
IEC60529 IP66
Sensitivity
adjustor
E3F2-DS30B4-S
---
Connector
N. A.
Through-beam
7m
IEC60529 IP67
Emitter only
E3F2-7L-M1-S
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
NPN
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DC4-M1-S
Connector
PNP
Through-beam
7m
IEC60529 IP67
Receiver only
E3F2-7DB4-M1-S
Connector
NPN
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7C4-M1-S
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Through-beam
7m
IEC60529 IP67
Receiver and
Emitter
E3F2-7B4-M1-S
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-M1-S
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-M1-S
Light-ON/
g
D k ON
Dark-ON
(selectable)
Connector
NPN
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RC4-M1-S-E*1
Connector
PNP
Retroreflective
2m
IEC60529 IP67
Polarized
E3F2-R2RB4-M1-S-E*1
Connector
NPN
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10C4-M1-S
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.1 m
IEC60529 IP67
Wide beam
E3F2-DS10B4-M1-S
Light-ON/
Dark-ON
(selectable)
Connector
NPN
Diffuse
reflective
0.3 m
IEC60529 IP67
Sensitivity
adjustor
E3F2-DS30C4-M1-S
Light-ON/
Dark-ON
(selectable)
Connector
PNP
Diffuse
reflective
0.3 m
IEC60529 IP67
Sensitivity
adjustor
E3F2-DS30B4-M1-S
Note:
Sensing
method
Sensing
distance
Degree of
protection
Remarks
Model
1. Material specification for stainless-steel housing case: 1,4305 (DIN), 303 (ANSI). Other material specifications are available upon
request.
2. All-stainless-steel models for harsh environments are available to satisfy the higher degree of protection IP67, except for 0.3-m
diffuse-reflective models.
(-E) *1 Model numbers ending with the suffix -E are models without the E39-R1 Retroreflector.
E3F2
E3F2
AC-switching Models with Plastic Housing
Operating
modes
Connection
method
Control
output
Sensing method
---
Pre-wired
---
Through-beam
3m
IEC60529 IP66
Emitter only
E3F2-3LZ
L-ON
Pre-wired
AC solid
state
(SCR)
Through-beam
3m
IEC60529 IP66
Receiver only
E3F2-3DZ1
D-ON
Pre-wired
AC solid
state
(SCR)
Through-beam
3m
IEC60529 IP66
Receiver only
E3F2-3DZ2
L-ON
Pre-wired
AC solid
state
(SCR)
Through-beam
3m
IEC60529 IP66
Receiver and
Emitter
E3F2-3Z1
D-ON
Pre-wired
AC solid
state
(SCR)
Through-beam
3m
IEC60529 IP66
Receiver and
Emitter
E3F2-3Z2
L-ON
Pre-wired
AC solid
state
(SCR)
Retroreflective
2m
IEC60529 IP66
Non polarized
E3F2-R2Z1
D-ON
Pre-wired
AC solid
state
(SCR)
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2Z2
L-ON
Pre-wired
AC solid
state
(SCR)
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2Z1-E*1
D-ON
Pre-wired
AC solid
state
(SCR)
Retroreflective
2m
IEC60529 IP66
Non-polarized
E3F2-R2Z2-E*1
L-ON
Pre-wired
AC solid
state
(SCR)
Diffuse reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10Z1-N*2
D-ON
Pre-wired
AC solid
state
(SCR)
Diffuse reflective
0.1 m
IEC60529 IP66
Wide beam
E3F2-DS10Z2-N*2
Note:
Sensing
distance
Degree of
protection
Remarks
Model
Model
Retroreflector
E39-R1, E39-R3
E39-RSA, E39-RSB
Lens Cap
E39-F31
Mounting Bracket
Y92E-B18
Connector
Plugs (Order Separately)
Cable
Standard
Appearance
Straight (4 conductor)
L-shape (4 conductor)
Robot (vibration-proof)
Straight (4 conductor)
L-shape (4 conductor)
Cable length
Model
2m
XS2F-D421-D80-A
5m
XS2F-D421-G80-A
2m
XS2F-D422-D80-A
5m
XS2F-D422-G80-A
2m
XS2F-D421-D80-R
5m
XS2F-D421-G80-R
2m
XS2F-D422-D80-R
5m
XS2F-D422-G80-R
E3F2
E3F2
Specifications
DC Switching Models
Item
E3F2-7C4-j,
E3F2-7B4-j
E3F2-R2C4-j,
E3F2-R2B4-j
Through-beam
g
E3F2-R2RC4-j,
E3F2-R2RB4-j
E3F2-DS10C4-j,
E3F2-DS10B4-j
Diffuse reflective
Retroreflective
Non-polarized
Polarized
10 to 30 VDC
Current consumption
45 mA max.
25 mA max.
Sensing distance
(See note 1.)
7m
2m
Response time
2.5 ms
Control output
50 ms
Ambient illumination
(See note 2.)
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between current carry parts and case
Vibration resistance
Shock resistance
Degree of protection
Light source
Infrared LED
Indicators
Sensitivity adjustment
Fixed
Connection method
Operation mode
Weight
Plastic case
Metal case
2 m (MSR)
Red LED
0.1 m
0.3 m
IEC60529
IP66
Infrared LED
Adjustable
Connector models:
Approx. 40 g
Approx. 60 g
Circuit protection
Housing materials
Plastic
Nickel-brass
Stainless steel
Note:
E3F2-DS30C4-j,
E3F2-DS30B4-j
Plastic
Nickel-brass
Stainless steel
Plastic
Nickel-brass
Stainless steel
Plastic
Nickel-brass
Stainless steel
1. Per actual stable sensing distance, for details, see the Gain vs. Set Distance ratios in the Engineering Data.
2. The intensity of the illumination on the surface of the receiver with a 20% fluctuation of the optical output per 200 lx. This is not the
maximum available operating illumination.
E3F2
E3F2
AC Switching Models
Item
E3F2-3Z1, E3F2-3Z2
E3F2-R2Z1, E3F2-R2Z2
E3F2-DS10Z1, E3F2-DS10Z2
Through-beam
Retroreflective
Diffuse reflective
Current consumption
10 mA max.
5 mA max.
3m
Sensing object
Opaque: 11 mm min.
Opaque: 56 mm min.
Opaque
Directional angle
3 to 20
---
Differential travel
---
20% max.
Response time
30 ms max.
Control output
AC solid state (SCR) 200 mA max.; residual voltage: 5 V max. at 200 mA (see note 3)
100 ms
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
1,500 VAC, 50/60 Hz for 1 min between current carry parts and case
Vibration resistance
Shock resistance
Degree of protection
Light source
Infrared
Indicators
Sensitivity adjustment
Fixed
Connection method
Operation mode
Circuit protection
---
Weight
Housing materials
Case: ABS
Lens: Acrylate resin
Note:
1. Per actual stable sensing distance, for details, see the Gain vs. Set Distance ratios in the Engineering Data.
2. The intensity of the illumination on the surface of the receiver with a 20% fluctuation of the optical output per 200 lx. This is not the
maximum available operating illumination.
3. When you use the Photoelectric Sensor at the temperature over 45C, the load current must be within rated value. Please refer to
the Precautions.
E3F2
E3F2
Engineering Data
Operating Range (Typical)
E3F2-R2Rj-4j (Retroreflective, polarized)
40
10
30
20
10
0
1
10
20
E3F2-7j-4j (Through-beam)
6
4
2
0
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
2
4
6
30
8
40
10
Distance X (m)
E3F2-DS10j4-N
E3F2-DS10j4-P1
E3F2-DS30j4-jj
15
White
paper
(5 x
5 cm)
Y
10
X
E3F2-R2j4-jj (Retroreflective)
Distance X (m)
5
0
5
10
Y
X
White
paper
(10 x
10 cm)
Y
X
15
Distance X (m)
20
40
60
80
100
120
Distance X (mm)
Distance X (cm)
E3F2-R2j4
E3F2-R2Rj4-j
100
10
DC switching type
AC switching type
0,1
0
10
12
14
Distance (m)
Distance (m)
Distance (m)
E3F2
E3F2
E3F2-DS10Zj-N
E3F2-DS30j4
E3F2-DS10j4-N
30
50
45
8
Sensing object
(black paper:
5 x 5 cm)
6
5
4
3
40
20
Sensing object
(white paper:
5 x 5 cm)
15
10
Sensing object
(black paper:
5 x 5 cm)
2
5
Sensing object
(white paper:
5 x 5 cm)
25
20
40
60
80
100
120
30
Sensing object
(white paper:
10 x 10 cm)
25
20
15
Sensing object
(black paper:
10 x 10 cm)
10
5
0
35
20
Distance (mm)
40
60
80
100
120
10
Distance (mm)
20
30
40
50
60
Distance (cm)
Operation
Output Circuits
Configuration
NPN
pre-wired
Model
Connection
method
Output
transistor
E3F2-7C4
E3F2-7C4-M
E3F2-7C4-C
E3F2-7C4-S
E3F2-R2C4
E3F2-R2RC4-M
E3F2-R2RC4-C
E3F2-R2RC4-S
E3F2-DS10C4-N
E3F2-DS10C4-M
E3F2-DS10C4-C
E3F2
DS10C4 C
E3F2 DS10C4 S
E3F2-DS10C4-S
E3F2-DS30C4
E3F2-DS30C4-M
E3F2-DS30C4-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
Output circuit
Brown (1) (see note)
Light indicator
(Mode selection)
Pink (2)
Red
Main
circuit
Black
(4)
Load
100 mA max.
(control output)
10 to
30 VDC
ZD
Blue (3)
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Pink (2)
Red
Main
circuit
Load
Black
(4)
100 mA max.
(control output)
Blue
(3)
10 to
30 VDC
ZD
ZD:VZ = 36 V
PNP
pre-wired
E3F2-7B4
E3F2-7B4-M
E3F2-7B4-C
E3F2-7B4-S
E3F2-R2B4
E3F2-R2RB4-M
E3F2-R2RB4-C
E3F2-R2RB4-S
E3F2-DS10B4-N
E3F2-DS10B4-M
E3F2-DS10B4-C
E3F2-DS10B4-S
E3F2-DS30B4
E3F2-DS30B4-M
E3F2-DS30B4-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
Light indicator
Pink (2)
ZD
Red
Main
circuit
(Mode selection)
Black (4)
Blue
100 mA max.
(control
Load
output)
(3)
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Light indicator
Pink
Black
(4)
100 mA max.
(control
output)
Load
(3)
ZD
Red
Main
circuit
Blue
ZD:VZ = 36 V
10
10 to
30 VDC
10 to
30 VDC
E3F2
E3F2
Configuration
NPN
connector
PNP
connector
AC switching
Model
Connection
method
Output
transistor
E3F2-7C4-P1
E3F2-7C4-M1-M
E3F2-7C4-M1-C
E3F2-7C4-M1-S
E3F2-R2C4-P1
E3F2-R2RC4-M1
-M
E3F2-R2RC4-M1
-C
E3F2-R2RC4-M1
-S
E3F2-DS10C4P1
E3F2-DS10C4M1-M
E3F2-DS10C4M1-C
E3F2-DS10C4M1-S
E3F2-DS30C4P1
E3F2-DS30C4M1-M
E3F2-DS30C4M1-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
E3F2-7B4-P1
E3F2-7B4-M1-M
E3F2-7B4-M1-C
E3F2-7B4-M1-S
E3F2-R2B4-P1
E3F2-R2RB4-M1
-M
E3F2-R2RB4-M1
-C
E3F2-R2RB4-M1
-S
E3F2-DS10B4P1
E3F2-DS10B4M1-M
E3F2-DS10B4M1-C
E3F2-DS10B4M1-S
E3F2-DS30B4P1
E3F2-DS30B4M1-M
E3F2-DS30B4M1-S
Connect the
pink and
brown wires
or open the
pink wire.
E3F2-3Z1
E3F2-R2Z1
E3F2-DS10Z1-N
--- (Fixed)
Light indicator
(Mode selection)
Pink (2)
Red
Main
circuit
Black
(4)
Load
100 mA max.
(control output)
10 to
30 VDC
ZD
Blue (3)
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Pink (2)
Red
Main
circuit
Load
Black
(4)
100 mA max.
(control output)
Blue
(3)
10 to
30 VDC
ZD
ZD:VZ = 36 V
ON when
light is
incident.
(Light-ON)
Light indicator
Pink (2)
(Mode selection)
ZD
Red
Main
circuit
Black
(4)
100 mA max.
(control
Load
output)
(3)
Blue
10 to
30 VDC
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Light indicator
Pink
ZD
Red
Main
circuit
Black
(4)
100 mA max.
(control
output)
Load
10 to
30 VDC
(3)
Blue
ZD:VZ = 36 V
E3F2-3Z2
E3F2-R2Z2
E3F2-DS10Z2-N
Note:
Output circuit
ON when
light is
incident.
(Light-ON)
ON when
light is interrupted.
(Dark-ON)
Brown
Light indicator
Load
Red
Main
circuit
Black
200 mA max.
(control output)
24 to
240 VAC
Blue
Timing Chart
Light-ON Mode
Dark-ON Mode
Light indicator
(red)
ON
OFF
Light indicator
(red)
Control
output
ON
OFF
Control
output
Load
(relay)
Mode selector
Incident
Interrupted
Incident
Interrupted
Operate
Release
Load
(relay)
Terminals/Connections
Vcc
ON
OFF
ON
OFF
Operate
Release
0V
Output
11
E3F2
E3F2
Dimensions
Note:
DC Switching Models
Polyvinyl chloride-covered cable, 4 dia. (18/0.12),
2-conductor (brown and blue)
Standard length: 2 m
E3F2-7L
64.9
42.3
24
37
22
6.2
4 dia.
M18 x 1 6g
16.4 dia.
4.8 dia.
Light indicator
Emitter
4
8
E3F2-7Dj4
64.9
42.3
24
37
Light indicator
22
6.2
4 dia.
M18 x 1 6g
16.4 dia.
4.8 dia.
Receiver
4
8
E3F2-R2j4
64.9
42.3
24
37
M18 x 1 6g
4
8
12
Light indicator
22
4 dia.
5
16.4 dia.
4.8 dia.
6.5
Receiver
Emitter
E3F2
E3F2
E3F2-DS10j4-N
64.9
42.3
24
37
Receiver
M18 x 1 6g
Light indicator
22
6.2
4 dia.
5
16.4 dia.
4.8 dia.
Emitter
4
8
E3F2-DS30j4
64.9
49.3
42.3
24
37
Receiver
M18 x 1 6g
4
Sensitivity adjustor
6.2
22
16.4 dia.
4 dia.
4.8 dia.
Emitter
Light indicator
8
E3F2-7L-P1
62
73
42.3
24
37
M18 x 1 6g
4
Light indicator
22
6.2
M21 x 1 6g
16.6 dia.
4.7 dia.
Emitter
13
E3F2
E3F2
E3F2-7Dj4-P1
62
73
42.3
24
37
M18 x 1 6g
22
6.2
16.6 dia.
M12 x 1 6g
4.7 dia.
Light indicator
Receiver
4
8
E3F2-R2j4-P1
62
73
42.3
24
37
Receiver
M18 x 1 6g
22
6.5
M12 x 1 6g
16.6 dia.
4.7 dia.
Light indicator
Emitter
4
8
E3F2-DS10j4-P1
62
73
42.3
24
37
Receiver
M18 x 1 6g
22
6.2
Light indicator
Emitter
4
8
14
16.6 dia.
M12 x 1 6g
4.7 dia.
E3F2
E3F2
E3F2-DS30j4-P1
62
73
49.3
42.3
24
37
Receiver
22
6.2
Sensitivity adjustor
M18 x 1 6g
16.6 dia.
M12 x 1 6g
4.7 dia.
Emitter
Light indicator
8
E3F2-7L-M/-C/-S
64.9
42.3
24
37
M18 x 1 6g
27.7
6.2
16.4 dia.
4 dia.
4.8 dia.
Light indicator
Emitter
E3F2-7Dj4-M/-C/-S
64.9
42.3
24
37
27.7
6.2
4 dia.
M18 x 1 6g
16.4 dia.
4.8 dia.
Light indicator
Receiver
15
E3F2
E3F2
E3F2-R2Rj4-M/-C/-S
64.9
42.3
Receiver
37
24
7.8
27.7
4 dia.
M18 x 1 6g
16.4 dia.
4.8 dia.
Light indicator
Emitter
E3F2-DS10j4-M/-C/-S
64.9
42.3
Receiver
37
24
6.2
27.7
4 dia.
M18 x 1 6g
16.4 dia.
4.8 dia.
Light indicator
Emitter
E3F2-DS30j4-M/-S
64.9
49.3
42.3
Receiver
37
16
6.2
Sensitivity adjustor
Light indicator
27.7
4 dia.
M18 x 1 6g
16.4 dia.
4.8 dia.
Emitter
24
E3F2
E3F2
E3F2-7L-M1-M/-M1-C/-M1-S
65.5
76
42.3
24
37
M18 x 1 6g
6.2
27.7
16.4 dia.
M12x1 6g
4.8 dia.
Light indicator
Emitter
E3F2-7Dj4-M1-M/-M1-C/-M1-S
65.5
76
42.3
24
37
M18 x 1 6g
6.2
27.7
16.4 dia.
M12x1 6g
4.8 dia.
Light indicator
Receiver
E3F2-R2Rj4-M1-M/-M1-C/-M1-S
65.5
76
42.3
Receiver
37
24
M18 x 1 6g
4
7.8
27.7
16.4 dia.
M12x1 6g
4.8 dia.
Light indicator
Emitter
17
E3F2
E3F2
E3F2-DS10j4-M1-M/-M1-C/-M1-S
65.5
76
42.3
Receiver
37
24
M18 x 1 6g
6.2
27.7
16.4 dia.
M12x1 6g
4.8 dia.
Light indicator
Emitter
E3F2-DS30j4-M1-M/-M1-S
65.5
76
49.3
42.3
Receiver
37
24
M18 x 1 6g
6.2
27.7
Sensitivity adjustor
Light indicator
16.4 dia.
M12x1 6g
4.8 dia.
Emitter
AC Switching Models
E3F2-3Z1, E3F2-3Z2
(Light Source and Receiver)
90
Emitter:
67.3
62
5 dia.
8
M18 x 1 6g
24
3.1
E3F2-3LZ Power indicator (emitter)
E3F2-3DZj Light indicator (receiver)
16.8 dia.
22
3.1
18
Emitter or
receiver
E3F2
E3F2
E3F2-R2Z1, E3F2-R2Z2
E3F2-DS10Z1-N,
E3F2-DS10Z2-N
90
67.3
62
8
5
5 dia.
M18 x 1 6g
4
24
Receiver
6.2
16.8 dia.
Light indicator
3.1
22
Emitter
40.3
34
7.5
59.9 52
8
2.7
E39-R3 Retroreflector
4.5
29
3.4
R20
11
13.7
3.4
Adhesive
side
18.45
28
20
20 0.2
22.9
0.2
11
Two, M3
34.8
25.4 34
14
38
25.40.1
41.8
38
0.2
16
R25.4
3.4
34
10.1
19.3
1.2
Two, M3
2.6
1.2
1.2
E39-RSA Retroreflector
E39-RSB Retroreflector
35
33
10
40
38
0.7
0.7
8
Four, R1
Note:
10
Adhesive
Reflecting tape
surface
35
33
Retroreflector
E39-R3
E39-RSA
E39-RSB
Sensing distance
5 to 100 cm
20 to 50 cm
20 to 80 cm
Adhesive
tape
Four, R1
Reflecting
surface
19
E3F2
E3F2
Y92E-B18 Mounting Bracket
320.2
17 max.
47 max.
7
Note:
30
18 dia.
Hexagonal bolt: M5 x 32
Material: plastic
20 dia.
Metal rim
E3F2
Gasket
Precautions
This product is not designed or rated for ensuring
safety of persons.
Do not use it for such purposes.
If the input/output lines of the Photoelectric Sensor are placed in the
same conduit or duct as power lines or high-voltage lines, the Photoelectric Sensor could be induced to malfunction, or even be damaged, by electrical noise. Separate the wiring, or use shielded lines
as input/output lines to the Photoelectric Sensor.
Do not subject the Photoelectric Sensor to excessive shock when
mounting, in keeping with IEC60529 IP66 standards.
Do not connect the black wire to the brown wire without a load.
Direct connection of these wires may damage the Photoelectric
Sensor (AC switching type).
Brown
! WARNING
130
0
45
55
Mounting
Do not exceed a torque of
Load
Sensor
24 to 240 VAC
Black
Blue
! WARNING
The E3F2 Photoelectric Sensor is not a safety component for
ensuring the safety of people which is defined in EC Directive
(91/368/EEC) and covered by separate European standards or
by any other regulations or standards.
When you use the Photoelectric Sensor in the vicinity of an inverter
motor, be sure to connect the protective earth ground wire of the motor to earth. Failure to ground the motor may result in malfunction of
the Sensor.
20
E3F2
E3F2
21
E3F2
22
E3F2
E3F2
E3F2
23
WARRANTY
OMRONs exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NONINFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRONS ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to
the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the users programming of a programmable product, or any consequence thereof.
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
Sensing Devices Division H.Q.
Industrial Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7022/Fax: (81)75-344-7107
Printed in Japan
0805-0.5C (0997) (M)