You are on page 1of 2

739 686

65 Panel Antenna

Kathrein X-polarized adjustable electrical downtilt antennas offer the


wireless carrier the ability to tailor polarization diversity sites for
optimum performance. Using variable downtilt, only a few models
need be procured to accommodate the needs of widely varying
conditions.
0-7 downtilt range.
UV resistant pulltruded fiberglass radome.
DC Grounded.
No moving electrical connections.
Wideband vector dipole technology.

General specifications:
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Maximum input power
Isolation
Weight
Dimensions

806960 MHz
<1.5:1
50 ohms
IM3: <-150 dBc
+45 and -45
2 x 7-16 DIN female
500 watts (at 50C) (per input)
>30 dB
48.5 lb (22 kg)
101.6 x 10.3 x 4.6 inches
(2580 x 262 x 116 mm)
Equivalent flat plate area 10 ft2 (0.929 m2)
Wind survival rating*
120 mph (200 kph)
Shipping dimensions
112 x 11.3 x 6.5 inches
(2846 x 287 x 165 mm)
Shipping weight
53 lb (24 kg)
Mounting
Fixed mount options are available for 2 to
4.6 inch (50 to 115 mm) OD masts.
See reverse for order information.
Horizontal pattern
45-polarization

Specifications:

806866 MHz
Gain
17 dBi
Front-to-back ratio
>25 dB (co-polar)
+45 and -45 polarization 70 (half-power)
horizontal beamwidth
+45 and -45 polarization 7.9 (half-power)
vertical beamwidth
Electrical downtilt
07
continuously adjustable
Sidelobe suppression for
0 2 4 7 T
first sidelobe above horizon 17 17 17 17 dB
sector 030 above horizon 14 14 14 14 dB
Cross polar ratio
Main direction
0
25 dB (typical)
Sector
60
>10 dB

824894 MHz
17.2 dBi
>25 dB (co-polar)
68 (half-power)

880960 MHz
17.5 dBi
>25 dB (co-polar)
65 (half-power)

7.7 (half-power)

7.5 (half-power)

07

07

Vertical pattern
45-polarization

0 2 4 7 T
0 2 4 7 T
18 18 18 18 dB 18 18 18 18 dB
15 15 15 15 dB 17 17 17 17 dB
25 dB (typical)
>10 dB

25 dB (typical)
>10 dB

* Mechanical design is based on environmental conditions as stipulated in


EIA-222-F (June 1996) and/or ETS 300 019-1-4 which include the static
mechanical load imposed on an antenna by wind at maximum velocity.
See the Engineering Section of the catalog for further details.
10736-D
936.2205/g
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500
Email: communications@kathrein.com Internet: www.kathrein-scala.com

Fax: (541) 779-3991

739 686

65 Panel Antenna

2.625 inches 0.125


(68 mm 4)
35 mm
M6

64 mm
M8

2 x 738 546 Mounting Kit

101.6 inches
(2580 mm)
103.7 inches
(2634 mm)
105.3 inches
(2674 mm)

4.6 inches
(116 mm)

742 033 Sector Mounting Kit

+45n

10.3 inches
(262 mm)

Mounting Options:
Model
2 x 738 546

850 10013

742 033


742 034

Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Tilt Mount Kit
08 degrees downtilt angle.
Three-panel Sector Mounting Kit
(120 deg. ea.) for 4.5 inch
(114.3 mm) OD mast.
Three-panel Sector Mounting Kit
(120 deg. ea.) for 5.5 inch
(139.7 mm) OD mast.

806/960
-45

806/960
+45

7/16 DIN

7/16 DIN

Profile PA1

Order Information:
Model
739 686

Description
Antenna with 7-16 DIN connectors

All specifications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500
Email: communications@kathrein.com Internet: www.kathrein-scala.com

Fax: (541) 779-3991

You might also like