You are on page 1of 2

Nitoor Sol

constructive solutions

Industrial Cleaning Solvent


Uses

Application

Nitoor Sol is specially formulated to remove most natural &


synthetic resins including

Saturate clean waste cotton/cloth with Nitoor Sol. Thoroughly wipe the specic area to be cleaned till paint/grease
is removed. Use dry cloth to wipe the substrate clean.

Industrial grease/oil/wax etc.

For larger areas, mechanical scrubber is recommended for effective cleaning after wetting the affected area with Nitoor Sol.

Acrylics
Curing compounds(wax & resin based)

Limitations

Unset epoxies & Urethanes

Nitoor Sol is most effective for removing freshly applied


materilas.Hardened materials(Such as epoxies, urethanes
and similar products) can only be removed mechanically. .
Materials like Wax and resin based curing compounds can
be removed even after hardening. Please consult Fosroc for
clarications

Bitumen etc
Ideal for use as cleaning agent for all Fosroc products.
Advantages
Effective & fast cleaning

Estimating

Dissolves most industrial paints & liquids

Supply

Fast evaporation

Nitoor Sol

No damage to concrete

: 5 ltr, 20 ltr

Storage

Description
Nitoor Sol is specic industrial low boiling solvent specially
formulated to be used as a cleaning agent.

Nitoor Sol has a shelf life of 12 months when stored in


unopened containers under normal warehouse conditions.

Precautions

Nitoor Sol does not affect the concrete.

Health & Safety

Technical Support
Fosroc offers a comprehensive range of high performance, high
quality ooring, jointing and repair products for both new and
existing oor surfaces. In addition, Fosroc offers a technical
support package to speciers, end-users and contractors, as
well as on-site technical assistance in locations all over the
world.
Properties

Nitoor Sol should not come into contact with skin and eyes
or be swallowed .Some people are sensitive to epoxy resins,
hardeners and solvents. Gloves, goggles and barrier creams
must be used.
Ensure adequate ventilation and avoid inhalation of vapours.
Nitoor Sol should be washed from skin immediately with
soap and water. Should accidental eye contamination occur

Appearance

: Clear liquid

Specic gravity

: 0.88

with any of the above products, it should be washed well


with plenty of water and medical advice should be sought. If

Temperature: Should not be applied when the surface temperature of the substrate is above 500C.

Nitoor Sol

Specication Clause

swallowed medical attention should be sought immediately.


Vomiting should not be induced.
Fire
Nitoor Sol is ammable. Do not expose to naked ames

The cleaning agent shall be Nitoor Sol, a low boiling solvent


for industrial cleaning needs. The cleaning agent shall not have
any adverse effect on the concrete / steel substrate.

or other sources of ignition. Do not smoke while handing

Application instructions

or foam type extinguishers.

Surface preparation

Flash point

Ensure surface should be free from dirt & debris.Do not apply
solvent on wet substrate.

Nitoor Sol

the materials. Containers should be tightly sealed when not


in use. In the event of re, extinguish with Carbondioxide

page 1 of 2

330C

Nitoor Sol

Fosroc Chemicals
(India) Pvt. Ltd.
Head Ofce
Sapthagiri Palace, No.38,
II & III Floor, 12th Cross,
CBI Road, Ganganagar North,
Bangalore 560 024

Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation specication
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
directly or indirectly arising from the use of its products whether or not in accordance with
any advice, specication, recommendation or information given by it.
telephone

fax

e-mail

++91 80-42521900

++91 80-23551510

enquiryindia@fosroc.com

Regional Ofces

Chennai

Mumbai

Noida

Kolkata

No. 26(old no.33), 1st Floor,


1st Street Postal Colony,
West Mambalam,
Chennai 600 033.
Ph: 044-24899949-94
Fax: 044-24896641

1401/1402, 14th Floor,


A-WingThe Great Eastern Summit
Sector-15, CBD, Belapur
Navi Mumbai 400 614
Ph: 022-43406800-04
Fax: 022-27562423

D-166 Sector 10
Dist. Gautam Budha Nagar,
Noida,
UP 201 301
Ph:0120-4270620-21
Fax: 0120-4270622

304, Jodhpur Park


Kolkata 700 068
Ph:033-65343188
Fax: 033-2499-0280

www.fosroc.com
page 2 of 2

INDIA/2014/0535/A

You might also like