Professional Documents
Culture Documents
High-precision model
The compensator of AT-B series incorporates four suspension wires made of super-hightensile metal that features minimal thermal expansion coefficient, providing unmatched
durability and accuracy even in the harshest environmental conditions. Finely tuned magnetic
damping system quickly levels and stabilizes the line of sight despite the fine vibrations
present when working near heavy equipment or busy roadways.
The AT-B series can focus on objects at 20cm (7.9 in.) in front of the telescope. This feature
dramatically facilitates the works in confined spaces.
Rotation speed of the focusing knob is automatically switched between coarse and fine,
allowing for quick and precise focusing.
Fine horizontal knobs located on both sides of instrument can be operated without clamping,
speeding up aiming procedures to the staff and other objects.
Circular level can be viewed via integrated pentagonal prism (AT-B2) or plane mirror (ATB3/B4) without changing your eye height.
Horizontal angles can be directly read in 1 or 1gon units. Free rotation feature of the
horizontal circle allows you to read any angle from zero. The circle is covered for protection
against dirt and scratch. The readout window is located below the eyepiece for quick reading.
All-Weather Dependability
With the IPx6 rating, the instrument is protected against powerful water jets from all
directions, meaning the AT-B series withstands a sudden shower or torrential rainfall. The
advanced protection design not only prevents water penetration, but also deters clouding or
condensation inside the telescope.
In addition to height and angle, distance to the staff can be simultaneously measured using
stadia lines. This is accomplished by reading the length of staff between two stadia lines and
multiplying the value by 100.
Optional Accessories
Diagonal Eyepiece
DE16 (AT-B2) / DE22 (AT-B3/B4)
Facilitates your works when the level is set at low height or in confined spaces.
AT-Bseries SPECIFICATIONS
AT-B2
AT-B3
AT-B4
Telescope
Length
28X
24X
42mm (1.65
in.)
36mm (1.42
in.)
32mm (1.26
in.)
Resolving Power
3.5
Field of View
(at 100m/328ft.)
120
125
(2.3m / 7.5ft.) (2.5m / 8.2ft.)
Minimum Focus
Magnification
Objective Aperture
Image
Stadia Constant
Stadia Ratio
Erect
0
100
0.7mm (0.03
in.)
1.5mm (0.06
in.)
With Micrometer
0.5mm (0.02
in.)
n/a
2.0mm (0.08
in.)
Compensator
Type
Setting Accuracy
0.3
Working Range
15
0.5
Circular level
Sensitivity
10 / 2mm
Horizontal circle
Diameter
AT-B2
AT-B3
AT-B4
Telescope
Minimum Division
1/ 1gon
General
Water Resistance
Operating
Temperature
Size
Width
Length
Height
Weight
1.85kg (4.1
lbs.)
135mm (5.31
in.)