Professional Documents
Culture Documents
0 (2001-09
9.1.3
9.1.4
9.1.5
9.1.6
9.1.7
9.1.8
9.1.9
9.1.10
9.1.11
9.1.12
9.1.13
9.1.14
9.1.15
9.1.16
9.1.17
9.1.18
9.1.19
9.1.20
9.1.21
9.1.22
9.1.23
9.1.24
9.1.25
9.1.26
9.1.27
9.1.28
9.1.29
9.1.30
9.1.31
9.1.32
9.1.33
9.1.34
9.1.35
9.1.36
9.1.37
9.1.38
9.1.39
9.1.40
9.1.41
9.1.42
9.1.43
9.1.44
9.1.45
9.1.46
9.1.47
9.1.48
9.1.49
9.1.50
9.1.51
9.1.52
9.1.53
9.1.54
9.1.55
9.1.56
9.1.57
9.1.58
9.1.59
9.1.60
9.1.61
9.1.65
9.1.66
9.1.68
Adobe Acrobat
Document
9.2.2.60
Void
UL Capacity Credit
9.1.3
COMMON TRANSPORT CH
9.1.3.1
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Configuration Generation ID
CHOICE Common Physical Channel To Be Configured
>Secondary CCPCH
>>Secondary CCPCH
>>>Common Physical Channel ID
>>>FDD SCCPCH Offset
>>>DL Scrambling Code
>>>FDD DL Channelisation Code Number
>>>TFCS
>>>Secondary CCPCH Slot Format
>>>TFCI Presence
>>>Multiplexing Position
>>>Power Offset Information
>>>>PO1
>>>>PO3
>>>STTD Indicator
>>>FACH Parameters
>>>>Common Transport Channel ID
>>>>Transport Format Set
>>>>ToAWS
>>>>ToAWE
>>>>Max FACH Power
>>>PCH Parameters
>>>>Common Transport Channel ID
>>>>Transport Format Set
>>>>ToAWS
>>>>ToAWE
>>>>PCH Power
>>>>PICH Parameters
>>>>>Common Physical Channel ID
>>>>>FDD DL Channelisation Code
Number
>>>>>PICH Power
>>>>>PICH Mode
>>>>>STTD Indicator
>PRACH
>>PRACH
>>>Common Physical Channel ID
>>>Scrambling Code Number
>>>TFCS
>>>Preamble Signatures
FDD Message
Presence
Range
M
M
M
M
M
M
1
M
M
C-PCH
M
M
M
C SlotFormat
M
1
M
M
M
0..<maxnoofFACHs>
M
M
M
M
M
0..1
M
M
M
M
M
1
M
M
M
M
M
1
M
M
M
M
1..<MaxnoofSlotFormatsPR
ACH>
M
M
M
M
>>>TFCS
>>>CD Signatures
M
O
M
M
>>>UL SIR
>>>Maximum DL Power
>>>Minimum DL Power
>>>PO2
>>>PO3
M
M
M
M
M
1
M
M
1
M
M
M
M
M
1
M
M
M
1..<maxnoofPCPCHs>
M
M
M
>>>>PCP Length
>>>>UCSM Information
>>>>>Min UL Channelisation Code Length
>>>>>NF_max
>>>>>Channel Request Parameters
>>>>>>AP Preamble Signature
>>>>>AP Sub Channel Number
>>>VCAM Mapping Information
>>>>Min UL Channelisation Code Length
>>>>NF_max
>>>>Max Number of PCPCHes
>>>>SF Request Parameters
>>>>>AP Preamble Signature
>>>>>AP Sub Channel Number
>>>AP-AICH Parameters
>>>>Common Physical Channel ID
>>>>FDD DL Channelisation Code Number
>>>>AP-AICH Power
M
C-NCA
M
M
>>>>CSICH Power
>>>>STTD Indicator
>>>CD/CA-ICH Parameters
>>>>Common Physical Channel ID
>>>>FDD DL Channelisation Code Number
>>>>CD/CA-ICH Power
>>>>STTD Indicator
Condition
SlotFormat
CA
NCA
PCH
Range bound
MaxnoofFACHs
MaxnoofPCPCHs
MaxnoofLen
MaxnoofSlotFormatsPRACH
MaxAPSigNum
0..<maxAPSigNum>
M
O
C-CA
M
M
M
1..<maxnoofLen>
1..<maxAPSigNum>
M
O
1
M
M
M
1
M
M
M
Explanation
The IE shall be present if the Secondary CCPCH Slot Format
anyifofthe
theChannel
values from
8 to 17.Indication
The IE shall be present
Assignment
CA
Active.
The IE shall be present if the Channel Assignment Indication
Inactive.
The IE shall be present if CA
the PCH
parameters
Explanation
Maximum number of FACHs that can be defined on a Secondary CCPCH.
Maximum number of PCPCHs for a CPCH
Maximum number of Min UL Channelisation Code Length
Maximum number of SF for a PRACH
Maximum number of AP Signatures.
Semantics description
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
9.2.1.16
Criticality
YES
YES
YES
YES
Assigned Criticality
reject
reject
reject
ignore
9.2.1.13
9.2.2.15
9.2.2.13
9.2.2.14
9.2.1.58
9.2.2.43
9.2.1.57
9.2.2.23
Power Offset
9.2.2.29
Power Offset
9.2.2.29
9.2.2.48
9.2.1.14
9.2.1.59
9.2.1.61
9.2.1.60
DL Power
9.2.1.21
9.2.1.14
9.2.1.59
9.2.1.61
9.2.1.60
DL Power
GLOBAL
YES
9.2.1.21
9.2.1.13
9.2.2.14
9.2.1.49A
9.2.2.26
9.2.2.48
9.2.1.13
9.2.2.42
9.2.1.58
9.2.2.31
reject
reject
9.2.2.37
9.2.2.38
9.2.1.50
9.2.2.32
9.2.1.14
9.2.1.59
For the UL
9.2.1.13
9.2.2.1
9.2.2.14
9.2.2.D
9.2.2.48
9.2.1.14
9.2.1.59
YES
9.2.2.4B
CPCH Scrambling Code
Number
9.2.2.4B
9.2.1.58
Preamble Signatures
9.2.2.31
9.2.2.1C
9.2.1.50
9.2.2.4C
For the UL
Note: When not present, all
CD signatures are to be
used.
For the UL
For UL CPCH message
control part
UL SIR
9.2.2.58
DL Power
9.2.1.21
DL Power
9.2.1.21
DL Power
9.2.1.21
Power Offset
9.2.2.29
Power Offset
9.2.2.29
9.2.2.16
9.2.2.23C
9.2.2.23A
9.2.2.1D
9.2.2.4A
9.2.1.13
9.2.2.4B
9.2.2.13
For UL PCPCH
For DL CPCH message
part
Reject
9.2.2.14
9.2.2.24A
9.2.2.22
9.2.2.23B
9.2.2.1A
9.2.2.1B
Refer to TS [18]
9.2.2.22
9.2.2.23B
9.2.2.20A
9.2.2.1A
9.2.2.1B
9.2.1.13
9.2.2.14
AICH Power
9.2.2.D
AICH Power
9.2.2.D
9.2.2.48
AICH Power
9.2.2.D
9.2.2.48
9.2.1.13
9.2.2.14
xplanation
econdary CCPCH Slot Format IE is set to
values from
8 to 17.Indication IE is set to
hannel
Assignment
CA
Active.
hannel Assignment Indication IE is set to
A PCH
Inactive.
e
parameters IE is not present.
xplanation
can be defined on a Secondary CCPCH.
er of PCPCHs for a CPCH
n UL Channelisation Code Length
mber of SF for a PRACH
mber of AP Signatures.
9.1.4
IE/Group Name
Message Discriminator
Message Type
Transaction ID
FACH Parameters info
M
M
M
Presence
Range
>FACH Parameters
PCH Parameters
RACH parameters
CPCH parameters
Criticality Diagnostics
9.2.1.17
Range bound
MaxnoofFACHs
Explanation
Maximum number of
FACHs that can be defined
on a Secondary
CCPCH[FDD] / a group of
Secondary CCPCHs [TDD].
9.2.1.45
9.2.1.46
9.2.1.62
0..<maxnoofFACHs>
SETUP RESPONSE
Semantics description
Criticality
YES
GLOBAL
Assigned Criticality
reject
ignore
YES
ignore
YES
ignore
YES
ignore
YES
ignore
9.1.5
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.6
9.2.1.17
SETUP FAILURE
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.6
9.1.6.1
FDD Message
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Configuration Generation ID
CHOICE Common Physical Channel To Be Configured
M
M
M
M
M
M
Presence
>Secondary CCPCH
>>FACH parameters
>>>Common Transport Channel ID
>>>Max FACH Power
M
O
0..<maxFACHCell>
>>>ToAWS
>>>ToAWE
>>PCH Parameters
>>>Common Transport Channel ID
>>>PCH Power
O
O
>>>ToAWS
>>>ToAWE
>>PICH Parameters
>>>Common Physical Channel ID
>>>PICH Power
>PRACH
>>PRACH Parameters
>>>Common Physical Channel ID
>>>Preamble Signatures
>>>Allowed Slot Format Information
O
O
M
O
0..1
M
O
0..1
M
O
0..<MexPRACHCell>
M
O
0..<MaxnoofSlotFormatsPR
ACH>
0..<MaxPRACHCell>
M
O
0..<maxnoofCPCHs>
M
O
O
>>>Maximum DL Power
>>>Minimum DL Power
>>AP-AICH Parameters
>>>Common Physical Channel ID
>>>AP-AICH Power
>>>CSICH Power
>>CD/CA-ICH Parameters
Range
0..<maxnoofCPCHs>
M
O
O
0..<maxnoofCPCHs>
Range bound
MaxFACHCell
M
O
Explanation
Maximum number
of FACHs that can
be defined in a Cell
MaxnoofCPCHs
Maximum number
of CPCHs that can
be defined in a Cell
MaxPRACHCell
Maximum number
of PRACHs and
AICHe that can be
defined in a Cell
MaxnoofSlotFormatsPRACH
Maximum number
of SF for a PRACH
Semantics description
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
9.2.1.16
9.2.1.14
DL Power
9.2.1.21
9.2.1.61
9.2.1.60
9.2.1.14
DL Power
9.2.1.21
9.2.1.61
9.2.1.60
Criticality
YES
YES
YES
YES
GLOBAL
YES
YES
GLOBAL
9.2.1.13
9.2.1.49A
9.2.1.13
9.2.2.31
9.2.2.37
9.2.2.38
GLOBAL
GLOBAL
9.2.1.13
9.2.2.D
9.2.1.14
9.2.2.58
DL Power
Assigned Criticality
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
9.2.1.21
DL Power
9.2.1.21
DL Power
9.2.1.21
GLOBAL
9.2.1.13
AICH Power
reject
9.2.2.D
AICH Power
9.2.2.D
GLOBAL
reject
9.2.1.13
AICH Power
9.2.2.D
9.1.7
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
RECONFIGURATION RESPONSE
Semantics description
Criticality
Assigned Criticality
YES
reject
YES
ignore
9.1.8
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.6
9.2.1.17
RECONFIGURATION FAILURE
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.9
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Common Physical Channel
ID
Configuration Generation
ID
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
9.2.1.13
9.2.1.16
DELETION REQUEST
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
YES
reject
reject
reject
reject
9.1.10
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
DELETION RESPONSE
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.11
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Blocking Priority Indicator
M
M
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
9.2.1.5
Shutdown Timer
C-BlockNormal
9.2.1.56
Condition
BlockNormal
Explanation
The IE shall be present if
the Blocking Priority
Indicator IE indicates
Normal Priority.
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
YES
reject
reject
reject
reject
9.1.12
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.13
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.6
9.2.1.17
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.14
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
Semantics description
Criticality
YES
YES
Assigned Criticality
ignore
ignore
9.1.15
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Range
9.2.1.45
9.2.1.46
9.2.1.62
Semantics description
Criticality
YES
Assigned Criticality
ignore
9.1.16
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Start Of Audit Sequence
Indicator
AUDIT REQUEST
Presence
M
M
M
M
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.56B
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
reject
9.1.17
AUDIT RESPONSE
IE/Group Name
Message Discriminator
Message Type
Transaction ID
End Of Audit Sequence Indicator
Cell Information
M
M
M
M
>C-ID
>Configuration Generation ID
>Resource Operational State
>Availability Status
>Local Cell ID
M
M
M
M
M
>BCH Information
>PCH Information
>PICH Information
>FACH Information
>>FACH Individual Information
>PRACH Information
>>PRACH Individual Information
>RACH Information
Presence
Range
0..
<maxCellinNodeB >
0..<maxSCPICHCell>
0..<maxSCCPCHCell>
0..<maxFACHCell>
0..<maxPRACHCell>
M
0..<maxRACHCell>
>AICH Information
>>AICH Individual Information
0..<maxPRACHCell>
M
>PCPCH Information
>>PCPCH Individual Information
>CPCH Information
>>CPCH Individual Information
>AP-AICH Information
>>AP-AICH Individual Information
>CD/CA-ICH Information
>>CD/CA-ICH Individual Information
>SCH Information
M
M
M
>Local Cell ID
>DL or Global Capacity Credit
>UL Capacity Credit
>Common Channels Capacity Consumption Law
M
M
O
M
O
O
O
O
M
M
O
M
Criticality Diagnostics
0..<maxPCPCHCell>
0..<maxCPCHCell>
0..<maxCPCHCell>
0..<maxCPCHCell>
0.. <maxCCPinNodeB>
0..
<maxLocalCellinNodeB>
0..
<maxLocalCellinNodeB>
Range bound
MaxCellinNodeB
MaxCCPinNodeB
MaxCPCHCell
MaxLocalCellinNodeB
MaxPCPCHCell
MaxSCPICHCell
MaxSCCPCHCell
MaxFACHCell
MaxPRACHCell
MaxRACHCell
Explanation
Maximum number of Cell that can be configured in Node B
Maximum number of communication control ports that can exist in the
Nodethat
B can be defined in a Cell
Maximum number of CPCHes
Maximum number of Local Cells that can exist in the Node B
Maximum number of PCPCHes that can be defined in a Cell
Maximum number of Secondary CPICH that can be defined in a Cell.
Maximum number of Secondary CCPCH that can be defined in a Cell.
Maximum number of FACHes that can be defined in a Cell
Maximum number of PRACHes that can be defined in a Cell
Maximum number of RACHes that can be defined in a Cell
Semantics description
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.29A
9.2.1.9
9.2.1.16
9.2.1.52
9.2.1.2
9.2.1.38
Criticality
YES
YES
EACH
Assigned Criticality
reject
ignore
ignore
ignore
ignore
ignore
EACH
ignore
ignore
ignore
EACH
ignore
ignore
ignore
EACH
ignore
EACH
Common Physical Channel Status Information 9.2.1.13A
ignore
EACH
ignore
EACH
Common Physical Channel Status Information 9.2.1.13A
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
Common Physical Channel Status Information 9.2.1.13A
ignore
TDD
SyncInformation
Channel
Common Physical Channel
Status
9.2.1.13A YES
ignore
9.2.1.15
9.2.1.52
9.2.1.2
EACH
EACH
9.2.1.38
9.2.1.20B
9.2.1.65A
9.2.1.9A
9.2.1.20A
9.2.1.39
9.2.1.47
9.2.1.46A
9.2.1.37A
EACH
9.2.1.37A
9.2.1.20B
9.2.1.65A
9.2.1.9A
9.2.1.20A
9.2.1.17
YES
ignore
ignore
ignore
ignore
xplanation
that can be configured in Node B
cation control ports that can exist in the
Nodethat
B can be defined in a Cell
CHes
l Cells that can exist in the Node B
CHes that can be defined in a Cell
ry CPICH that can be defined in a Cell.
ry CCPCH that can be defined in a Cell.
CHes that can be defined in a Cell
CHes that can be defined in a Cell
CHes that can be defined in a Cell
9.1.18
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Measurement ID
Common Measurement
Object Type
CHOICE Common
Measurement Object Type
>Cell
>>C-ID
>>Time Slot
>RACH
>>C-ID
>>Common Transport
Channel ID
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.42
9.2.1.10
9.2.1.9
M
O
9.2.3.23
M
M
9.2.1.9
9.2.1.14
>CPCH
>>C-ID
>>Common Transport
Channel ID
M
M
9.2.1.9
9.2.1.14
>>Spreading Factor
Minimum UL
Channelisation Code
Length
Common Measurement
Type
9.2.2.22
9.2.1.11
Measurement Filter
Coefficient
9.2.1.41
Report Characteristics
SFN reporting indicator
M
M
9.2.1.51
FN reporting indicator 9.2.1.29B
SFN
9.2.1.53A
ION REQUEST
Semantics Description
TDD only
FDD only
FDD only
Criticality
YES
YES
YES
Assigned Criticality
YES
reject
reject
reject
reject
YES
reject
YES
reject
YES
YES
reject
reject
YES
reject
9.1.19
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Measurement ID
CHOICE Common
Measurement Object Type
M
M
M
M
O
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.42
>Cell
>>Common
Measurement value
9.2.1.12
>RACH
>>Common
Measurement Value
9.2.1.12
>CPCH
>>Common
Measurement Value
9.2.1.12
SFN
9.2.1.53A
Criticality Diagnostics
9.2.1.17
ION RESPONSE
Semantics Description
Common Measurement
Object Type that the
measurement was initiated
with.
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
YES
FDD only
FDD only
Common Measurement
Time Reference
YES
ignore
YES
ignore
9.1.20
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Measurement ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.42
9.2.1.6
9.2.1.17
ION FAILURE
Semantics Description
Criticality
YES
YES
YES
YES
Assigned Criticality
reject
Ignore
Ignore
Ignore
9.1.21
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Measurement ID
CHOICE Common
Measurement Object Type
M
M
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.42
>Cell
>>Common
Measurement Value
Information
9.2.1.12A
>RACH
>>Common
Measurement Value
Information
9.2.1.12A
>CPCH
>>Common
Measurement Value
Information
9.2.1.12A
SFN
9.2.1.53A
Semantics Description
Common Measurement
Object Type that the
measurement was initiated
with.
Criticality
YES
YES
YES
Assigned Criticality
ignore
ignore
ignore
FDD only
FDD only
Common Measurement
Time Reference
YES
ignore
9.1.22
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Measurement ID
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.42
NATION REQUEST
Semantics Description
Criticality
YES
YES
Assigned Criticality
ignore
ignore
9.1.23
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Measurement ID
Cause
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.42
9.2.1.6
RE INDICATION
Semantics Description
Criticality
YES
YES
YES
Assigned Criticality
ignore
ignore
ignore
9.1.24
9.1.24.1
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Local Cell ID
C-ID
Configuration Generation ID
T Cell
UARFCN
UARFCN
Maximum Transmission Power
Closed Loop Timing Adjustment Mode
Primary Scrambling Code
Synchronisation Configuration
>N_INSYNC_IND
>N_OUTSYNC_IND
>T_RLFAILURE
DL TPC pattern 01 count
Primary SCH Information
>Common Physical Channel ID
>Primary SCH Power
FDD Message
Presence
Range
M
M
M
M
M
M
M
M
M
M
O
M
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.38
9.2.1.9
9.2.1.16
9.2.2.49
9.2.1.65
9.2.1.65
9.2.1.40
9.2.2.2A
9.2.2.34
1
9.2.1.47A
9.2.1.47B
9.2.1.56A
9.2.2.13A
M
M
M
M
1
M
M
>TSTD Indicator
Secondary SCH Information
>Common Physical Channel ID
>Secondary SCH power
>TSTD Indicator
Primary CPICH Information
>Common Physical Channel ID
>Primary CPICH power
>Transmit Diversity Indicator
Secondary CPICH Information
M
M
M
M
>STTD Indicator
Limited power increase information
>Power_Raise_Limit
>DL_power_averaging_window_size
9.2.1.13
DL Power
9.2.1.21
9.2.1.64
1
9.2.1.13
M
M
DL Power
9.2.1.21
9.2.1.64
1
9.2.1.13
9.2.2.33
9.2.2.53
M
M
M
0..<maxSC
PICHCell>
9.2.1.13
9.2.2.13
9.2.2.14
DL Power
9.2.1.21
9.2.2.53
1
9.2.1.13
M
1
M
M
9.2.1.14
DL Power
9.2.1.21
9.2.2.48
1
M
M
9.2.2.29A
9.2.2.12A
Range bound
MaxSCPICHCell
Explanation
Maximum
number of
Secondary
CPICH that can
be defined in a
Cell.
Semantics description
Corresponds to Nu [14]
Corresponds to Nd [14]
Criticality
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
EACH
Assigned Criticality
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
reject
YES
YES
reject
reject
9.1.25
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.26
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.6
9.2.1.17
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.27
9.1.27.1
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Configuration Generation ID
Maximum Transmission Power
Synchronisation Configuration
>N_INSYNC_IND
>N_OUTSYNC_IND
>T_RLFAILURE
Primary SCH Information
>Common Physical Channel ID
>Primary SCH power
FDD Message
Presence
Range
M
M
M
M
M
O
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
9.2.1.16
9.2.1.40
0,1
M
M
M
9.2.1.47A
9.2.1.47B
9.2.1.56A
0,1
M
M
9.2.1.13
DL Power
9.2.1.21
Secondary SCH Information
>Common Physical Channel ID
>Secondary SCH power
0,1
9.2.1.13
M
M
DL Power
9.2.1.21
Primary CPICH Information
>Common Physical Channel ID
>Primary CPICH power
Secondary CPICH Information
0,1
M
M
M
M
9.2.1.13
9.2.2.33
0..<maxSCPICH
Cell>
9.2.1.13
DL Power
9.2.1.21
Primary CCPCH Information
>BCH Information
>>Common Transport Channel ID
>>BCH Power
0,1
1
M
9.2.1.14
DL Power
9.2.1.21
Range bound
MaxSCPICHCell
Explanation
Maximum
number of
Secondary
CPICH that can
be defined in a
Cell.
TION REQUEST
Semantics description
Criticality
YES
YES
YES
YES
YES
YES
Assigned Criticality
YES
reject
YES
YES
reject
reject
reject
reject
reject
reject
reject
reject
YES
reject
9.1.28
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.29
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.6
9.2.1.17
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.30
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
reject
9.1.31
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.32
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Indication Type
CHOICE Indication Type
>No Failure
>>Local Cell Information
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.36
1.. <max
LocalCellinNodeB
>
>>>Local Cell ID
>>>Add/Delete Indicator
>>>DL or Global Capacity Credit
>>>UL Capacity Credit
>>>Common Channels Capacity
Consumption Law
M
M
C-add
O
C-add
9.2.1.38
9.2.1.1
9.2.1.20B
9.2.1.65A
9.2.1.9A
C-add
9.2.1.20A
C-add
C-add
C-add
O
9.2.1.39
9.2.1.47
9.2.1.46A
9.2.1.37A
0..
<maxLocalCellinN
odeB>
M
M
O
M
9.2.1.37A
9.2.1.20B
9.2.1.65A
9.2.1.9A
9.2.1.20A
>Service Impacting
>>Local Cell Information
0..
<maxLocalCellinN
odeB>
>>>Local Cell ID
>>>DL or Global Capacity Credit
>>>UL Capacity Credit
>>>Common Channels Capacity
Consumption Law
M
O
O
O
9.2.1.38
9.2.1.20B
9.2.1.65A
9.2.2.3
9.2.1.20A
O
O
O
9.2.1.39
9.2.1.47
9.2.1.46A
M
O
O
O
0..
<maxLocalCellinN
odeB>
9.2.1.37A
9.2.2.12
9.2.2.60
9.2.2.3
9.2.1.20A
0..
<maxCCPinNodeB
>
9.2.1.15
9.2.1.52
9.2.1.2
M
M
M
>>>C-ID
>>>Resource Operational State
>>>Availability Status
>>>Primary SCH Information
M
O
O
O
9.2.1.9
9.2.1.52
9.2.1.2
Common Physical Channel Status Informatio
0..
<maxCellinNodeB
>
0..<maxSCPICHC
ell>
M
>>>BCH Information
0..<maxSCCPCH
Cell>
M
>>>PCH Information
>>>PICH Information
>>>FACH Information
0..
<maxFACHCell>
>>>PRACH Information
>>>>PRACH Individual Information
0..<maxPRACHCe
ll>
M
>>>RACH Information
0..
<maxPRACHCell>
>>>AICH Information
0..
<maxPRACHCell>
0..<maxPCPCHCe
ll>
0..
<maxCPCHCell>
>>>AP-AICH Information
>>>CPCH Information
>>>PCPCH Information
>>>>PCPCH Individual Information
0..
<maxCPCHCell>
>>>CD/CA-ICH Information
0..
<maxCPCHCell>
M
>>>SCH Information
Cause
9.2.1.6
Condition
add
Explanatio
n
The IE shall
be present if
the
Add/Delete
Indicator IE
is set to
Add.
Range bound
Explanatio
n
MaxLocalCellinNodeB
Maximum
number of
Local Cells
that can
exist in the
Node B
MaxCellinNodeB
Maximum
number of
C ID that
can be
configured
in Node B
MaxCPCHCell
Maximum
number of
CPCHes
that can be
defined in a
Cell
MaxSCPICHCell
Maximum
number of
Secondary
CPICH that
can
be
defined in a
Cell.
MaxSCCPCHCell
Maximum
number of
Secondary
CCPCH that
can
be
defined in a
Cell.
MaxFACHCell
Maximum
number of
FACHes
that can be
defined in a
Cell
MaxPCPCHCell
Maximum
number of
PCPCHes
that can be
defined in a
Cell
MaxPRACHCell
Maximum
number of
PRACHes
and AICHes
that can be
defined in a
Cell
MaxCCPinNodeB
Maximum
number of
communicat
ion control
ports that
can exist in
the Node B
S INDICATION
Semantics description
Criticality
YES
YES
YES
EACH
Assigned Criticality
ignore
ignore
ignore
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
YES
ignore
YES
ignore
YES
ignore
EACH
ignore
YES
ignore
YES
ignore
EACH
ignore
YES
ignore
YES
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
EACH
ignore
YES
ignore
YES
ignore
9.1.33
IE/Group Name
Message Discriminator
Message Type
Transaction ID
C-ID
BCCH Modification Time
MIB/SB/SIBInformation
Range
M
M
M
M
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.9
9.2.1.3
1..
maxIB
>IB Type
>IB OC ID
M
M
>CHOICE IB DeletionIndicator
>>NoDeletion
>>>SIB Originator
>>>IB SG REP
>>>Segment Information
9.2.1.35
9.2.1.31A
9.2.1.55
9.2.1.34
C-SIB
O
1..
maxIBSEG
>>>>IB SG POS
>>>>Segment type
O
C
CRNCOrigination
9.2.1.33
9.2.1.53B
>>>>IB SG DATA
C
CRNCOrigination
9.2.1.32
NULL
>>Deletion
Range bound
maxIB
maxIBSEG
Explanation
Maximum number of information Blocks supported in one
message.
Maximum number of segments for one Information Block
Explanation
Condition
CRNCOrigination
SIB
ON UPDATE REQUEST
Semantics description
Criticality
YES
YES
YES
GLOBAL
Assigned Criticality
reject
reject
reject
reject
GLOBAL
reject
9.1.34
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
RESPONSE
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.35
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Cause
Criticality Diagnostics
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.6
9.2.1.17
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.36
9.1.36.1
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
Transaction ID
UL DPCH Information
>UL Scrambling Code
>Min UL Channelisation Code length
>Max Number of UL DPDCHs
>puncture Limit
>TFCS
>UL DPCCH Slot Format
> UL SIR Target
>Diversity mode
>SSDT cell ID Length
>S Field Length
DL DPCH Information
>TFCS
>DL DPCH Slot Format
>TFCI signalling mode
>TFCI presence
>Multiplexing Position
>PDSCH RL ID
>PDSCH code mapping
>Power Offset Information
>>PO1
FDD message
Presence
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
M
1
M
M
C
CodeLen
M
M
M
M
9.2.2.59
9.2.2.22
9.2.2.21
9.2.1.50
9.2.1.58
9.2.2.57
UL SIR
9.2.2.58
9.2.2.9
9.2.2.45
9.2.2.40
M
O
C-FBI
1
9.2.1.58
9.2.2.10
9.2.2.50
9.2.1.57
9.2.2.23
M
M
M
C-SlotFormat
M
C-DSCH
RL ID
9.2.1.53
9.2.2.25
C-DSCH
1
M
Power Offset
9.2.2.29
>>PO2
Power Offset
>>PO3
Power Offset
M
M
M
M
9.2.2.29
9.2.2.16
9.2.2.18A
9.2.2.18B
DCH FDD Information9.2.2.4D
DSCH Information
M
M
>RL ID
>C-ID
>First RLS Indicator
M
M
M
9.2.2.29
0..1
9.2.1.61
9.2.1.60
1 to
<maxnoofRLs
>
9.2.1.53
9.2.1.9
9.2.2.16A
9.2.1.31
9.2.2.2
9.2.2.35
9.2.1.25
M
M
O
C
NotFirstRL
M
DL Power
>Maximum DL power
>Minimum DL power
O
C
Diversity mode
O
O
>Frame Offset
>Chip Offset
>Propagation Delay
>Diversity Control Field
9.2.1.21
DL Power
9.2.1.21
Condition
CodeLen
FBI
9.2.1.21
9.2.2.44
9.2.2.53
9.2.2.53A
9.2.2.A
Explanation
The IE shall be present if Min UL Channelisation Code Length IE equ
The IE shall be present if the UL DPCCH Slot Format IE indicates a slot for
2 FBI bits (see ref.[7]).
NotFirstRL
The IE shall be present if the RL is not the first one in the RL Informa
DSCH
SlotFormat
This IE is only present if the DL DPCH slot format is equal to any of the va
Diversity mode
Range bound
MaxnoofRLs
DL Power
Explanation
Maximum number of RLs for one UE.
P REQUEST
Semantics description
Criticality
YES
YES
YES
For UL
for UL
For DL
Assigned Criticality
reject
reject
reject
YES
reject
YES
reject
YES
reject
YES
EACH
ignore
notify
tion
elisation Code Length IE equals to 4.
CH Information IE is present.
tion
RLs for one UE.
YES
YES
reject
reject
9.1.37
9.1.37.1
FDD message
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
M
M
M
Transaction ID
Node B Communication Context ID
M
M
>RL ID
>RL Set ID
>Received total wide band power
>Diversity Indication
>CHOICE diversity Indication
>>Combining
>>>RL ID
M
M
M
C-NotFirstRL
M
Range
1 to
<maxnoofRLs>
M
O
M
O
O
Condition
Explanation
The IE shall be present if the RL is not the first one in the
Response IE.
Range bound
Explanation
Maximum number of RLs for one UE.
NotFirstRL
MaxnoofRLs
Presence
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
9.2.1.48
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
YES
ignore
9.2.1.15
YES
EACH
ignore
ignore
9.2.1.53
9.2.2.39
9.2.2.39A
9.2.1.26
9.2.1.53
9.2.1.20C
9.2.1.27A
9.2.2.46
9.2.2.49A
9.2.1.17
Explanation
ent if the RL is not the first one in the
Response IE.
Explanation
number of RLs for one UE.
YES
YES
YES
ignore
ignore
ignore
9.1.38
9.1.38.1
FDD Message
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
Node B Communication Context ID
M
C-Success
9.2.1.62
9.2.1.48
O
M
9.2.1.15
9.2.1.6
1 to
<maxnoofRLs>
>>>RL ID
>>>Cause
>>Successful RL Information Response
9.2.1.53
9.2.1.6
M
M
0 to
<maxnoofRLs
1>
>>>RL ID
>>>RL Set ID
>>>Received total wide band power
>>>Diversity Indication
M
M
M
C-NotFirstRL
9.2.1.53
9.2.2.39
9.2.2.39A
9.2.1.26
9.2.1.53
M
O
O
M
O
9.2.1.20C
9.2.1.27A
9.2.2.49A
9.2.2.46
9.2.1.17
Explanation
Condition
Success
NotFirstRL
Range bound
MaxnoofRLs
Explanation
Maximum number of RLs for one UE.
P FAILURE
Semantics description
Criticality
YES
YES
YES
YES
YES
EACH
EACH
Assigned Criticality
reject
ignore
ignore
ignore
ignore
ignore
ignore
YES
YES
ignore
ignore
9.1.39
9.1.39.1
IE/Group Name
Message Discriminator
Message Type
Node B Communication Context ID
FDD Message
Presence
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.48
Transaction ID
Compressed Mode Deactivation Flag
RL Information
M
O
9.2.1.62
9.2.2.3A
>RL ID
>C-ID
>Frame Offset
>Chip Offset
>Diversity Control Field
>DL Code Information
M
M
M
M
M
M
9.2.1.53
9.2.1.9
9.2.1.31
DL Power
>Maximum DL power
>Minimum DL power
DL Power
O
O
9.2.1.21
9.2.2.44
9.2.2.53
1..<maxnoofRL1>
9.2.2.2
9.2.1.25
FDD DL Code Information 9.2.2.14A
9.2.1.21
DL Power
9.2.1.21
Range bound
MaxnoofRL
Explanation
Maximum
number of RLs
for one UE
N REQUEST
Semantics description
Criticality
YES
YES
YES
EACH
Assigned Criticality
reject
reject
reject
notify
9.1.40
9.1.40.1
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
FDD message
Presence
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
Transaction ID
RL Information Response
>RL ID
>RL Set ID
> Received total wide band power
>Diversity Indication
>CHOICE Diversity Indication
>>Combining
>>>RL ID
>>Non combining
>>>DCH Information Response
>SSDT support indicator
Criticality Diagnostics
M
M
M
M
M
9.2.1.53
9.2.2.9
9.2.2.39A
9.2.1.26
9.2.1.53
M
M
O
9.2.1.20C
9.2.2.46
9.2.1.17
Range bound
MaxnoofRL
1..<maxnoofRL
-1>
Explanation
Maximum number
of RLs for one UE
N RESPONSE
Semantics description
Reference RL
Criticality
YES
YES
Assigned Criticality
reject
ignore
EACH
ignore
YES
ignore
9.1.41
9.1.41.1
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
FDD Message
Presence
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
CHOICE Cause Level
>General
>>Cause
>RL specific
>>Unsuccessful RL Information Response
M
M
9.2.1.62
9.2.1.6
>>>RL ID
>>>Cause
>>Succcessful RL Information Response
M
M
>>>RL ID
>>>RL Set ID
>>> Received total wide band power
>>>Diversity Indication
>>>CHOICE Diversity Indication
>>>>Combining
>>>>>RL ID
>>>>Non combining
>>>>>DCH Information Response
>>>SSDT support indicator
Criticality Diagnostics
Range bound
MaxnoofRL
1..<maxnoofRL1>
9.2.1.53
9.2.1.6
0..<maxnoofRL2>
M
M
M
M
M
9.2.1.53
9.2.2.39
9.2.2.39A
9.2.1.26
9.2.1.53
M
M
O
9.2.1.20C
Explanation
Maximum
number of RLs
for one UE
9.2.2.46
9.2.1.17
ON FAILURE
Semantics description
Criticality
YES
YES
YES
EACH
EACH
Assigned Criticality
reject
ignore
Ignore
ignore
ignore
Reference RL
YES
ignore
9.1.42
9.1.42.1
FDD Message
IE/Group Name
Message Discriminator
Message Type
Node B Communication Context ID
Presence
M
M
M
Range
Transaction ID
UL DPCH Information
>UL Scrambling code
>UL SIR Target
O
C CodeLen
9.2.2.58
9.2.2.22
9.2.2.21
>Puncture Limit
>TFCS
>UL DPCCH Slot Format
>Diversity mode
>SSDT Cell Identity Length
>S-Field Length
DL DPCH Information
>TFCS
>DL DPCH Slot Format
>TFCI Signalling Mode
>TFCI presence
O
O
O
O
O
O
9.2.1.50
9.2.1.58
9.2.2.57
9.2.2.9
9.2.2.45
9.2.2.40
O
O
O
C-Slot
Format
9.2.1.58
9.2.2.10
9.2.2.50
9.2.1.57
>Multiplexing Position
>PDSCH code mapping
>PDSCH RL ID
O
O
O
9.2.2.23
9.2.2.25
O
O
9.2.1.53
9.2.2.18A
DCHs FDD to Modify 9.2.2.4E
DCHs to Add
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
0..1
O
O
9.2.2.59
UL SIR
0..1
DCHs to Delete
RL ID
0..<maxnoofDC
Hs>
9.2.1.20
>DCH ID
DSCH to modify
>DSCH ID
>Transport Format Set
>Allocation/Retention Priority
>Frame Handling Priority
>ToAWS
>ToAWE
>Transport Bearer Request
Indicator
DSCH to add
M
O
O
O
O
O
M
9.2.1.27
9.2.1.59
9.2.1.1A
9.2.1.30
9.2.1.61
9.2.1.60
9.2.1.62A
0..<maxnoofDS
CHs>
DSCH to Delete
>DSCH ID
0..<maxnoofDS
CHs>
M
9.2.1.27
0..1
M
9.2.1.61
9.2.1.60
M
M
NULL
0..<maxnoofRL
s>
>RL ID
>DL Code Information
M
O
9.2.1.53
FDD DL Code Information 9.2.2.14A
>Maximum DL Power
DL Power
>Minimum DL Power
DL Power
>SSDT Indication
>SSDT Cell Identity
O
C
9.2.1.21
9.2.2.47
9.2.2.44
9.2.1.21
SSDTIndON
C
Diversity
mode
9.2.2.53
9.2.2.53A
Condition
SSDTIndON
CodeLen
SlotFormat
The IE shall be present if the DL DPCH Slot Format IE is equal to any of the
Diversity mode
The IE shall be present if the Diversity Mode IE is present in the UL DPCH Info
to none.
Range Bound
MaxnoofDCHs
MaxnoofDSCHs
MaxnoofRLs
Explanation
The IE shall be present if the SSDT Indication IE is set to 'SSDT Ac
Explanation
Maximum number of DCHs for a UE.
Maximum number of DSCHs for a UE.
Maximum number of RLs for a UE.
NFIGURATION PREPARE
Semantic Description
Criticality
YES
YES
YES
Assigned Criticality
reject
reject
reject
For UL
YES
reject
YES
reject
YES
reject
GLOBAL
reject
YES
reject
YES
reject
YES
reject
YES
EACH
reject
reject
YES
Explanation
T Indication IE is set to 'SSDT Active in the UE'.
Explanation
mber of DCHs for a UE.
reject
9.1.43
IE/Group name
Message Discriminator
Message Type
CRNC Communication Context ID
Transaction ID
RL Information Response
>RL ID
>DCH Information Response
>DSCH Information Response
>USCH Information Response
>TFCI2 Bearer Information Response
Criticality Diagnostics
M
O
O
O
O
O
Range Bound
MaxnoofRLs
Range
M
M
M
0..<maxnoofRLs>
Explanation
Maximum number
of RLs for a UE.
9.2.1.45
9.2.1.46
9.2.1.18
Semantic Description
9.2.1.62
Only one RL information
response group for one
group of combined RLs
shall be present
9.2.1.53
9.2.1.20C
9.2.1.27A
9.2.3.29
9.2.2.49A
9.2.1.17
TDD only
Criticality
YES
YES
EACH
YES
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
ignore
ignore
ignore
ignore
9.1.44
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
Transaction ID
CHOICE Cause Level
>General
>>Cause
>RL specific
>>RLs Causing Reconfiguration Failure
M
M
>>>RL ID
>>>Cause
Criticality Diagnostics
M
M
O
Range Bound
MaxnoofRLs
Range
M
M
M
M
0..<maxnoofRLs>
Explanation
Maximum
number of RLs
for a UE.
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
9.2.1.6
9.2.1.53
9.2.1.6
9.2.1.17
Semantic Description
Criticality
YES
YES
YES
YES
EACH
YES
Assigned Criticality
reject
ignore
ignore
ignore
ignore
ignore
9.1.45
IE/Group Name
Message Discriminator
Message type
Node B Communication Context ID
Presence
M
M
M
Transaction ID
CFN
Active Pattern Sequence Information
M
M
O
Range
9.2.1.45
9.2.1.46
9.2.1.48
9.2.1.62
9.2.1.7
9.2.2.A
ONFIGURATION COMMIT
Semantic Description
Criticality
YES
YES
YES
YES
Assigned Criticality
ignore
ignore
ignore
ignore
9.1.46
IE/Group Name
Message Discriminator
Message type
Node B Communication Context ID
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.48
Transaction ID
9.2.1.62
NFIGURATION CANCEL
Semantic Description
Criticality
YES
YES
Assigned Criticality
ignore
ignore
9.1.47
9.1.47.1
FDD Message
IE/Group Name
Message Discriminator
Message Type
Node B Communication Context ID
Presence
M
M
M
Range
Transaction ID
UL DPCH Information
>TFCS
DL DPCH Information
>TFCS
>TFCI Signalling Mode
>Limited Power Increase
DCHs to Modify
O
O
O
O
9.2.1.58
9.2.2.50
9.2.2.18A
DCHs FDD to Modify 9.2.2.4E
DCHs to Add
9.2.1.45
9.2.1.46
9.2.1.48
9.2.1.62
0..1
9.2.1.58
0..1
DCHs to Delete
0..<maxnoofDCH
s>
>DCH ID
Radio Link Information
>RL ID
>Maximum DL Power
M
O
>Minimum DL Power
DL Power
C-SF/2
9.2.1.21
FDD DL Code Information 9.2.2.14A
9.2.2.53A
9.2.1.20
0..<maxnoofRLs>
9.2.1.53
DL Power
9.2.1.21
Range Bound
MaxnoofDCHs
MaxnoofRLs
Condition
SF/2
Explanation
Maximum number of DCHs for a UE.
Explanation
The IE shall be present if the Transmission Gap Pattern
Sequence Information IE is included and the indicated
Downlink Compressed Mode method for at least one of the
included Transmission Gap Pattern Sequence is set to
"SF/2".
NFIGURATION REQUEST
Semantic Description
Criticality
YES
YES
YES
YES
YES
Assigned Criticality
reject
reject
reject
reject
reject
YES
reject
GLOBAL
reject
EACH
reject
YES
reject
9.1.48
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
Transaction ID
RL Information Response
>RL ID
>DCH Information Response
Criticality Diagnostics
M
O
O
Range bound
MaxnoofRLs
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
0..<maxnoofRL
s>
Explanation
Maximum
number of RLs
for a UE.
9.2.1.53
9.2.1.20C
9.2.1.17
FIGURATION RESPONSE
Semantic Description
Criticality
YES
YES
Assigned Criticality
reject
ignore
EACH
ignore
YES
YES
ignore
ignore
9.1.49
IE/Group Name
Message Discriminator
Message Type
Node B Communication Context ID
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.48
M
M
9.2.1.18
9.2.1.62
>RL ID
M
Range bound
MaxnoofRLs
1..<maxnoofRLs
>
Explanation
Maximum
number of radio
links for one
UE
9.2.1.53
ON REQUEST
Semantics description
Criticality
YES
YES
Assigned Criticality
YES
EACH
reject
reject
reject
notify
9.1.50
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
Criticality Diagnostics
M
O
9.2.1.62
9.2.1.17
TION RESPONSE
Semantics description
Criticality
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
9.1.51
IE/Group Name
Message Discriminator
Message Type
Node B Communication Context ID
M
M
M
9.2.1.45
9.2.1.46
9.2.1.48
Transaction ID
Power Adjustment Type
DL Reference Power
M
M
C-Common
9.2.1.62
9.2.2.27
O
C-Individual
>RL ID
>DL Reference Power
M
M
C-CommonOrIndividual
C-CommonOrIndividual
C-CommonOrIndividual
Condition
Presence
Range
DL power
9.2.1.21
9.2.2.18B
1..<maxnoofR
Ls>
9.2.1.53
DL power
9.2.1.21
9.2.2.20
9.2.2.B
9.2.2.C
Common
Explanation
The IE shall be present if the 'Adjustment Type IE is equal to Common.
Individual
CommonOrIndividual
Range Bound
MaxnoofRLs
Explanation
Maximum number of Radio Links for a UE
QUEST [FDD]
Semantics description
Power on DPCH
Power on DPCH
Criticality
YES
YES
Assigned Criticality
ignore
ignore
YES
YES
ignore
Ignore
YES
GLOBAL
ignore
ignore
YES
ignore
YES
YES
ignore
ignore
9.1.52
IE/Group Name
Message Discriminator
Message Type
Node B Communication Context ID
M
M
M
Presence
9.2.1.45
9.2.1.46
9.2.1.48
Transaction ID
Measurement ID
Dedicated Measurement Object Type
CHOICE Dedicated Measurement Object Type
M
M
M
M
9.2.1.62
9.2.1.42
9.2.1.22
>RL
>>RL Information
>>>RL ID
>>>DPCH ID
>RLS
>>RL Set Information
Range
1..<maxnoofRLs>
9.2.1.53
M
O
9.2.3.5
1..<maxnoofRLSe
ts>
9.2.2.39
>>>RL Set ID
>ALL RL
>ALL RLS
Dedicated Measurement Type
Measurement Filter Coefficient
Report Characteristics
CFN reporting indicator
M
O
M
M
9.2.1.23
9.2.1.41
9.2.1.51
FN reporting indicator 9.2.1.29B
CFN
9.2.1.7
Range
MaxnoofRLs
MaxnoofRLSets
NULL
NULL
Explanation
Maximum number of individual RLs a measurement can be
started on.
Maximum number of individual RL Sets a measurement can
be started on.
TDD only
FDD only
FDD only
Criticality
YES
YES
Assigned Criticality
reject
reject
YES
YES
YES
reject
reject
reject
EACH
reject
YES
YES
YES
YES
reject
reject
reject
reject
YES
reject
9.1.53
IE/Group Name
Message Discriminator
Message Type
CRNC Communication Context ID
Transaction ID
Measurement ID
CHOICE Dedicated Measurement Object
Type
>RL or ALL RL
>>RL Information
>>>RL ID
>>>DPCH ID
>>>Dedicated Measurement Value
>>>CFN
Range
M
M
M
M
M
O
9.2.1.45
9.2.1.46
9.2.1.18
9.2.1.62
9.2.1.42
1..<maxnoofRLs>
M
O
M
9.2.1.53
9.2.1.7
9.2.3.5
9.2.1.24
1..<maxnoofRLSets>
>>>RL Set ID
>>>Dedicated Measurement Value
M
M
9.2.2.39
9.2.1.24
>>>CFN
9.2.1.7
9.2.1.17
Criticality Diagnostics
Range
MaxnoofRLs
MaxnoofRLSets
Explanation
Maximum number
of individual RLs
the measurement
can be started on.
Maximum number
of individual RL
Sets a
measurement can
be started on.
Dedicated Measurement
Object Type the
measurement was initiated
with
TDD only
Criticality
YES
YES
YES
YES
EACH
Dedicated Measurement
Time Reference
FDD only
Assigned Criticality
reject
ignore
ignore
ignore
ignore
Dedicated Measurement
Time Reference
_
YES
ignore
9.1.54
IE/Group Name
Message Discriminator
Message Type
CRNC Communication
Context ID
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
Measurement ID
Cause
Criticality Diagnostics
M
M
M
O
9.2.1.62
9.2.1.42
9.2.1.6
9.2.1.17
ATION FAILURE
Semantics Description
Criticality
YES
YES
YES
YES
YES
Assigned Criticality
reject
ignore
ignore
ignore
ignore
9.1.55
IE/Group Name
Message Discriminator
Message Type
CRNC Communication
Context ID
Transaction ID
Measurement ID
CHOICE Dedicated
Measurement Object Type
Range
M
M
M
9.2.1.45
9.2.1.46
9.2.1.48
M
M
M
9.2.1.62
9.2.1.42
>RL or ALL RL
>>RL Information
>>>RL ID
>>>DPCH ID
>>>Dedicated
Measurement Value
Information
M
O
M
M
M
1..<maxnoofRLs>
9.2.1.53
9.2.3.5
9.2.1.24A
1..<maxnoofRLSets>
9.2.1.39
9.2.1.24A
Range
MaxnoofRLs
Explanation
Maximum number of individual RLs the
measurement can be started on.
MaxnoofRLSets
REPORT
Semantics Description
Dedicated Measurement
Object Type the measurement
was initiated with
TDD only
FDD only
Criticality
YES
YES
YES
YES
EACH
EACH
Assigned Criticality
ignore
ignore
ignore
ignore
ignore
ignore
9.1.56
IE/Group Name
Message Discriminator
Message Type
Node B Communication
Context ID
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.48
Transaction ID
Measurement ID
M
M
9.2.1.62
9.2.1.42
Criticality
YES
YES
YES
Assigned Criticality
ignore
ignore
ignore
9.1.57
IE/Group Name
Message Discriminator
Message Type
CRNC Communication
Context ID
M
M
M
Presence
Range
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
Measurement ID
Cause
M
M
M
9.2.1.62
9.2.1.42
9.2.1.6
Criticality
YES
YES
YES
YES
Assigned Criticality
ignore
ignore
ignore
ignore
9.1.58
IE/Group Name
Message Discriminator
Message Type
CRNC Communication
Context ID
M
M
M
Presence
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
CHOICE Reporting Object
M
M
9.2.1.62
>RL
>>RL Information
>>>RL ID
>>>Cause
>RL Set
>>RL Set Information
>>>RL Set ID
>>>Cause
>CCTrCH
>>RL ID
>>CCTrCH List
>>>CCTrCH ID
>>>Cause
Range
1 to
<MaxnoofRLs>
9.2.1.53
9.2.1.6
M
M
1 to <MaxnoofRLSets>
9.2.2.39
9.2.1.6
M
M
9.2.1.53
M
1 to <MaxnoCCTrCH>
M
CCTrCH ID
9.2.3.3
9.2.1.6
Range bound
MaxnoofRLs
Explanation
Maximum number of RLs
for one UE.
MaxnoofRLSets
Maximum number of RL
Sets for one UE.
MaxnoofCCTrCHs
Maximum number of
CCTrCHs for a UE.
Semantics description
Criticality
YES
YES
Assigned Criticality
ignore
ignore
YES
ignore
EACH
ignore
EACH
EACH
ignore
ignore
9.1.59
IE/Group Name
Message Discriminator
Message Type
CRNC Communication
Context ID
M
M
M
Presence
9.2.1.45
9.2.1.46
9.2.1.18
Transaction ID
CHOICE Reporting Object
M
M
9.2.1.62
>RL
>>Radio Link
Information
>>>RL ID
>RL Set
>>RL Set Information
>>>RL Set ID
>CCTrCH
>>RL ID
>>CCTrCH List
>>>CCTrCH ID
Range
1 to
<MaxnoofRLs>
9.2.1.53
M
1 to <MaxnoofRLSets>
9.2.2.39
M
M
9.2.1.53
1 to <MaxnoCCTrCH>
CCTrCH ID
9.2.3.3
Range bound
MaxnoofRLs
Explanation
Maximum number of RLs
for one UE.
MaxnoofRLSets
Maximum number of RL
Sets for one UE.
MaxnoofCCTrCHs
Maximum number of
CCTrCHs for a UE.
Semantics description
Criticality
YES
YES
Assigned Criticality
ignore
ignore
YES
ignore
EACH
ignore
EACH
EACH
ignore
ignore
9.1.60
IE/Group Name
Presence
Range
Message Discriminator
Message Type
Node B communication
context ID
M
M
M
9.2.1.45
9.2.1.46
9.2.1.48
Transaction ID
Active Pattern Sequence
Information
M
M
9.2.1.62
9.2.2.A
COMMAND [FDD]
Semantics description
Criticality
Assigned Criticality
YES
YES
ignore
ignore
YES
ignore
9.1.61
IE/Group Name
Message Discriminator
Message Type
CRNC Communication
Context ID
ERROR INDICATION
Presence
Range
M
M
O
9.2.1.45
9.2.1.46
9.2.1.18
Node B Communication
Context ID
9.2.1.48
Transaction ID
Cause
Criticality Diagnostics
M
O
O
9.2.1.62
9.2.1.6
9.2.1.17
Semantics Description
Criticality
YES
YES
Assigned Criticality
YES
ignore
YES
YES
YES
ignore
ignore
ignore
ignore
ignore
9.1.65
IE/Group Name
Message Discriminator
Message Type
Transaction ID
CHOICE Reset Indicator
>CommunicationContext
>>Communication Context Information
>>>CHOICE Communication Context
Type
RESET REQUEST
Presence
Range
M
M
M
M
1..<maxCommunicationCo
ntext>
M
>CommunicationControlPort
>>Communication Control Port
Information
>>>Communication Control Port ID
>Node B
1.. <maxCCPinNodeB>
M
Range bound
maxCommunicationContext
Explanation
Maximum number
of communication
contexts that can
exist in the NodeB
maxCCPinNodeB
Maximum number
of communication
control ports that
can exist in the
Node B
9.2.1.45
9.2.1.46
9.2.1.62
SemanticDescription
Criticality
YES
YES
EACH
Assigned Criticality
reject
ignore
reject
_
_
9.2.1.18
_
_
9.2.1.48
EACH
9.2.1.15
NULL
reject
9.1.66
IE/Group Name
Message Discriminator
Message Type
Transaction ID
Criticality Diagnostics
RESET RESPONSE
Presence
M
M
M
O
Range
9.2.1.45
9.2.1.46
9.2.1.62
9.2.1.17
Semantics description
Criticality
YES
YES
Assigned Criticality
reject
ignore
9.1.68
IE/Group Name
Message Type
Transaction ID
CRNC Communication
Context ID
RL Information
>RL ID
Range bound
MaxnoofRLs
Range
M
M
M
9.2.1.46
9.2.1.62
9.2.1.18
0..<maxnoofRLs>
M
Explanation
Maximum number of radio
links for one UE
9.2.1.53
RED INDICATION
Semantics description
Criticality
YES
YES
Assigned Criticality
ignore
EACH
ignore
ignore
9.2.1.1
Add/Delete Indicator
The add/delete indicator shall notify the RNC whether the associated resource has been added to or removed from the Node B.
IE/Group Name
Add/Delete Indicator
Presence
Range
9.2.1.1A
Allocation/Retention Priority
This parameter indicates the priority level in the allocation and retention of Node B internal resources. See A
IE/Group Name
Presence
Range
Priority Level
INTEGER (0..15)
Pre-emption Capability
Pre-emption Vulnerability
Adobe Acrobat
Document
Adobe Acrobat
Document
9.2.1.2
Availability Status
The availability status is used to indicate more detailed information of the availability of the resource. In accordance with ref. [6], following
IE/Group Name
Availability Status
Presence
Range
. In accordance with ref. [6], following values are defined. If the value of this attribute is an empty set, this implies that none of the status conditions descr
Semantics description
that none of the status conditions described in ref. [6] are present.
9.2.1.3
Indicates the time after which the new system information shall be applied on BCCH.
IE/Group Name
BCCH Modification Time
Presence
Range
(0..511)
Semantics description
All SFN values in which
MIB may be mapped are
allowed.
The tabular description is
presented in [18].
9.2.1.4
Binding ID
The Binding ID is the identifier of a user data stream. It is allocated at Node B and it is unique for each transport bearer under establishment
IE/Group Name
Binding ID
Presence
Range
9.2.1.5
The Blocking priority indicator shall indicate the immediacy with which a resource should be blocked from use. The following priority clas
IE/Group Name
Blocking Priority Indicator
Presence
Range
d from use. The following priority classes shall be supported in the Blocking priority indicator.
Semantics description
High priority: Block
resource immediately.
Normal priority: Block
resource when idle or upon
timer expiry.
Low priority: Block resource
when idle.
9.2.1.6
IE/Group Name
CHOICE Cause Group
>Radio Network Layer
>Radio Network Layer Cause
>Transport Layer
>Transport Layer Cause
>Protocol
>Protocol Cause
Cause
Prese
nce
Range
>Protocol Cause
>Misc
>Miscellaneous Cause
The meaning of the different cause values is described in the following table. In general, "not supported" cause values indicate that the co
missing. On the other hand, "not available" cause values indicate that the concerning capability is present, but insufficient resources were a
requested action.
Radio Network Layer cause
BCCH scheduling error
Cell not Available,
Combining not supported
Combining Resources Not Available
CM not supported
Common Transport Channel Type not supported
Dedicated Transport Channel Type not supported
DL Radio Resources not Available
DL SF not supported
DL Shared Channel Type not supported
Invalid CM Settings
Measurement not Supported For The Object
Measurement Temporarily not Available
Node B resources unavailable
Meaning
The Node B has detected an illegal BCCH schedule update (see subcla
The concerning cell or local cell is not available
The value of the received Diversity Control Field IE was set to 'Must', but the Nod
requested combining
The concerning cell(s) do not support Compressed Mode
The concerning cell(s) do not support the RACH and/or FACH and/or CPCH Com
Type
The CRNC cannot perform the requested blocking since a transport channel with a
The requested action cannot be performed due to that a COMMIT message was r
the concerning CFN has not yet elapsed
The concerning cell(s) do not support the requested configuration i.e. power leve
physical channel parameters
The Node B has already allocated an RL with the requested RL-id for th
The concerning cell(s) do not support S-CPICH
The Node B does not support the origination of the requested SIB for the
Loss of UL Uu synchronisation
The Node B is not aware of a local cell with the provided Local C
Sent when none of the above cause values applies but still the cause is Radio N
Meaning
The required transport resources are not available
Sent when none of the above cause values applies but still the cause is Transport
Protocol cause
Abstract Syntax Error (Reject)
Abstract Syntax Error (Ignore and Notify)
Abstract syntax error (falsely constructed message)
Message not Compatible with Receiver State
Semantic Error
Transfer Syntax Error
Unspecified
Miscellaneous cause
Control Processing Overload
Hardware Failure
Not enough User Plane Processing Resources
O&M Intervention
Unspecified
Meaning
The received message included an abstract syntax error and the concerning critic
(see subclause 10.3)
The received message included an abstract syntax error and the concerning criticali
notify (see subclause 10.3)
The received message contained IEs in wrong order or with too many occurrence
The received message was not compatible with the receiver state (see su
The received message included a semantic error (see subclause
Sent when none of the above cause values applies but still the cause is pr
Meaning
Cause
IE type and reference
Enumerated
(unknown C-ID,
Cell not available,
Power level not supported,
DL radio resources not available,
UL radio resources not available,
RL Already Activated/allocated,
Node B Resources Unavailable,
Measurement not supported for the object,
Combining Resources not available,
Requested configuration not supported,
Synchronization failure,
Priority transport channel established,
SIB Origination in Node B not Supported,
Requested Tx Diversity Mode not supported,
Unspecified,
BCCH scheduling error,
Measurement Temporarily not Available,
Invalid CM Setting, Reconfiguration CFN not elapsed,
Number of DL codes not supported,
S-CPICH not supported,
Combining not supported,
UL SF not supported,
DL SF not supported,
Common Transport Channel Type not supported,
Dedicated Transport Channel Type not supported,
Downlink Shared Channel Type not supported,
Uplink Shared Channel Type not supported,
CM not supported,
Tx diversity no longer supported,
Unknown Local Cell ID,
,
Number of UL codes not supported)
Enumerated
(Transport resource unavailable,
Unspecified,
)
Enumerated
(Transfer syntax error,
Abstract syntax error (reject),
Abstract syntax error (ignore and notify),
Message not compatible with receiver state,
Semantic error,
Semantics description
Unspecified,
Abstract syntax error (falsely constructed message),
)
Enumerated
(Control processing overload
Hardware failure,
O&M intervention,
Not enough user plane processing resources,
Unspecified,
)
ollowing table. In general, "not supported" cause values indicate that the concerning capability is
e that the concerning capability is present, but insufficient resources were available to perform the
requested action.
Meaning
The Node B has detected an illegal BCCH schedule update (see subclause 8.2.16.3)
The concerning cell or local cell is not available
The Node B does not support RL combining for the concerning cells
lue of the received Diversity Control Field IE was set to 'Must', but the Node B cannot perform the
requested combining
The concerning cell(s) do not support Compressed Mode
ncerning cell(s) do not support the RACH and/or FACH and/or CPCH Common Transport Channel
Type
The concerning cell(s) do not support the Dedicated Transport Channel Type
The Node B does not have sufficient DL radio resources available
The concerning cell(s) do not support the requested DL SF
The concerning cell(s) do not support the Downlink Shared Channel Type
The concerning cell(s) consider the requested Compressed Mode settings invalid
one of the concerning cell(s) does not support the requested measurement on the concerning object
type
The Node B can temporarily not provide the requested measurement value
The Node B does not have sufficient resources available
The concerning cell(s) do not support the requested number of DL codes
The concerning cell(s) do not support the requested number of UL codes
A DL power level was requested which the concerning cell(s) do not support
RNC cannot perform the requested blocking since a transport channel with a high priority is present
quested action cannot be performed due to that a COMMIT message was received previously, but
the concerning CFN has not yet elapsed
oncerning cell(s) do not support the requested configuration i.e. power levels, Transport Formats,
physical channel parameters
The concerning cell(s) do not support the requested transmit diversity mode
The Node B has already allocated an RL with the requested RL-id for this UE context
The concerning cell(s) do not support S-CPICH
The Node B does not support the origination of the requested SIB for the concerning cell
Loss of UL Uu synchronisation
Tx diversity can no longer be supported in the concerning cell.
The Node B does not have sufficient UL radio resources available
The concerning cell(s) do not support the requested minimum UL SF
The concerning cell(s) do not support the Uplink Shared Channel Type
The Node B is not aware of a cell with the provided C-ID
The Node B is not aware of a local cell with the provided Local Cell ID
t when none of the above cause values applies but still the cause is Radio Network layer related
Meaning
The required transport resources are not available
when none of the above cause values applies but still the cause is Transport Network layer related
Meaning
eceived message included an abstract syntax error and the concerning criticality indicated reject
(see subclause 10.3)
eived message included an abstract syntax error and the concerning criticality indicated ignore and
notify (see subclause 10.3)
eceived message contained IEs in wrong order or with too many occurrences (see subclause 10.3)
The received message was not compatible with the receiver state (see subclause 10.4)
The received message included a semantic error (see subclause 10.4)
The received message included a transfer syntax error (see subclause 10.2)
Sent when none of the above cause values applies but still the cause is protocol related
Meaning
9.2.1.7
CFN
Connection Frame Number for the radio connection, see ref. [17].
IE/Group Name
CFN
Presence
Range
Semantics description
9.2.1.8
Void
CFN Offset
9.2.1.9
C-ID
Presence
Range
Semantics description
9.2.1.9A
The capacity consumption law indicates the CRNC how the Capacity Credit is consumed by NBAP set of procedures, depending on the
reference spreading factor shall be the minimum possible spreading factor amongst the ones defined by the RACH slot format IE(s) in
procedures. For the PCPCH, the reference spreading factor shall be the minimum spreading factor computed fro
This capacity consumption law indicates the consumption law to be used with the following procedures :
Common Transport Channel Setup
Common Transport Channel Deletion
[FDD- Common Transport Channel Reconfiguration]
For the Common Transport Channel Setup procedure, the cost given in the consumption law shall be debited from the Capacity Credit, whe
Common Transport Channel Deletion one.
[FDD- For the Common Transport Channel Reconfiguration procedure, the difference of the consumption cost for the new spreading factor
debited from the Capacity Credit (or credited if this difference is negative).]
If the modelling of the internal resource capability of the Node B is modelled independently for the Uplink and Downlink, the "DL cost" sha
"UL Cost" shall be applied to the "UL Capacity Credit". If it is modelled as shared resources, both the "DL cost" and the "UL cost" shall be a
[FDD- When the Common Transport Channel Setup, Deletion or Reconfiguration procedures are used, the Capacity Credit shall be updated
(S-CCPCH, PICH, PRACH, AICH, PCPCH, CD/CA-ICH and AP-AICH), i.e. one cost shall be credited to or debited from the Capacity Cre
[FDD- The costs given in the consumption law are the costs per channelization code. When multiple channelization codes are used by a phy
Capacity Credit for this physical channel shall be taken as N times the cost given in the consumption law, where N is the number of channel
[TDD - When the Common Transport Channel Setup, or Deletion procedures are used, the Capacity Credit shall be updated considering all
PICH, PRACH), i.e. one cost shall be credited to or debited from the Capacity Credit per physical channel.]
IE/Group Name
Presence
SF allocation law
>DL cost
>UL cost
M
M
Range bound
MaxNumberOfSF
Explanation
Maximum number of
Spreading Factors
Range
<MaxNumberOfSF>
AP set of procedures, depending on the allocated Spreading Factor. [FDD- For the PRACH, the
ed by the RACH slot format IE(s) in the Common Transport Channel Setup or Reconfiguration
inimum spreading factor computed from the TFCS as described in [8].]
es :
debited from the Capacity Credit, whereas it shall be credited to the Capacity Credit for the
tion cost for the new spreading factor and the consumption cost for the old spreading factor shall be
plink and Downlink, the "DL cost" shall be applied to the "DL or Global Capacity Credit" and the
"DL cost" and the "UL cost" shall be applied to the "DL or Global Capacity Credit".
, the Capacity Credit shall be updated considering all physical channels related in these procedures
ed to or debited from the Capacity Credit per physical channel.]
hannelization codes are used by a physical channel, the cost credited to or debited from the
aw, where N is the number of channelization codes.]
redit shall be updated considering all physical channels related in these procedures (S-CCPCH,
nnel.]
IE type and reference
Semantics description
[FDD - For each SF, cost of its allocation: the first
instance corresponds to SF = 4, the second to SF = 8,
the third to SF = 16 and so on.]
[TDD For each SF, cost of its allocation: the first
instance corresponds to SF = 1, the second to SF = 2,
the third to SF = 4 and so on.]
INTEGER (0..65535)
INTEGER (0..65535)
9.2.1.10
The Common Measurement Object type indicates the type of object that the measurement is to be performed on.
IE/Group Name
Common Measurement
Object Type
Presence
Range
Semantics Description
9.2.1.11
The Common Measurement Type identifies which measurement that shall be performed.
IE/Group Name
Common Measurement
Type
Presence
Range
Semantics Description
UL Timeslot ISCP is used
by TDD only,
Acknowledged PRACH
preambles, Acknowledged
PCPCH Access Preambles,
Detected PCPCH Access
Preambles are used by
FDD only
9.2.1.12
The Common Measurement Value shall be the most recent value for this measurement, for which the reporting criteria were met.
IE/Group Name
CHOICE Common
Measurement Value
Presence
Range
>Transmitted Carrier
Power
>>Transmitted Carrier
Power Value
INTEGER(0..100)
INTEGER(0..621)
INTEGER(0..240, )
INTEGER(0..127)
INTEGER(0..15,)
>Acknowledged PCPCH
Access Preambles
>>Acknowledged
PCPCH Access
Preambles [FDD only]
>Detected PCPCH Access
Preambles
>>Detected PCPCH
M
Access Preambles [FDD
only]
INTEGER(0..240,)
According to mapping in
[22] and [23]
According to mapping in
[22] and [23]
FDD only
According to mapping in
[22]
TDD only
According to mapping in
[23]
FDD only
According to mapping in
[22]
FDD only
According to mapping in
[22]
9.2.1.12A
The Common Measurement Value Information IE provides information both on whether or not the Common Measurement Value is provided
IE/Group Name
CHOICE Measurement
Availability Indicator
>Measurement Available
>>Common Measurement
value
>Measurement not Available
Presence
M
Range
9.2.1.12
NULL
on Measurement Value is provided in the message or not and if provided also the Common Measurement Value itself.
Semantics Description
Criticality
Assigned Criticality
9.2.1.13
Common Physical Channel ID is the unique identifier for one common physical channel within a cell.
IE/Group Name
Common Physical Channel
ID
Presence
Range
Semantics description
9.2.1.13A
IE/Group Name
Presence
Common Physical Channel M
ID
Range
9.2.1.13
Resource Operational
State
9.2.1.52
Availability Status
9.2.1.2
Semantics Description
Criticality
Assigned Criticality
9.2.1.14
Common Transport Channel ID is the unique identifier for one common transport channel within a cell.
IE/Group Name
Common Transport
Channel ID
Presence
Range
Semantics description
9.2.1.14
The Common Transport Channel Information Response IE provides information for Common Transport Channels that have been establishe
IE/Group Name
Common Transport
Channel ID
Binding ID
Transport Layer Address
Presence
M
O
O
Range
9.2.1.14
9.2.1.4
9.2.1.63
Semantics Description
Assigned Criticality
9.2.1.14
IE/Group Name
Common Transport
Channel ID
Presence
M
Range
Resource Operational
State
9.2.1.52
Availability Status
9.2.1.2
9.2.1.14
Semantics Description
Criticality
Assigned Criticality
9.2.1.15
A Communication Control Port corresponds to one signalling bearer between the RNC and Node B for the control of Node B Communicati
IE/Group Name
Communication Control
Port ID
Presence
Range
or the control of Node B Communication Contexts. Node B may have multiple Communication Control Ports (one per Traffic Termination Point). The Co
Semantics description
per Traffic Termination Point). The Communication Control Port is selected at creation of the Node B Communication Context. The Communication Con
ion Context. The Communication Control Port ID is the identifier of the Communication Control Port.
9.2.1.16
Configuration Generation ID
The Configuration Generation ID describes the generation of the configuration of logical resources in a cell.
IE/Group Name
Configuration Generation
ID
Presence
Range
Semantics description
Value '0' means "No
configuration".
At possible wraparound of
the ID counter in CRNC the
value '0' shall not be used.
9.2.1.17
Criticality Diagnostics
The Criticality Diagnostics IE is sent by a Node B or the CRNC when parts of a received message have not been comprehended or are mi
message contained logical errors. When applicable, it contains information about which IEs that were not comprehended or were m
For further details on how to use the Criticality Diagnostics IE, see Annex C.
IE/Group Name
Procedure ID
Presence
Range
0..1
>Procedure Code
>Ddmode
M
M
INTEGER (0..255)
ENUMERATED (FDD,
TDD, Common)
Triggering Message
ENUMERATED(initiating
message, successful
outcome, unsuccessful
outcome, outcome)
Procedure Criticality
ENUMERATED(reject,
ignore, notify)
Transaction ID
Transaction ID
9.2.1.62
Information Element
Criticality Diagnostics
0 to <maxnoof
errors>
>IE Criticality
ENUMERATED(reject,
ignore, notify)
>IE ID
>Repetition Number
M
O
INTEGER (0..65535)
INTEGER (0..255)
>Message Structure
9.2.1.45A
>Type of Error
ENUMERATED(not
understood, missing, )
Range bound
Maxnooferrors
Explanation
Maximum no. of IE errors allowed to be reported with a single
message.
9.2.1.18
The CRNC Communication Context ID is the identifier of the Communication Context in the CRNC.
IE/Group Name
CRNC Communication
Context ID
Presence
Range
(0..2^20 1)
Semantics description
2^20-1 is reserved value to
indicate all the CRNC
communication contexts
that can be reached by the
communication control port
(All CRNCCC).
9.2.1.20
DCH ID
The DCH ID is the identifier of an active dedicated transport channel. It is unique for each active DCH among the active DCHs simultaneou
IE/Group Name
DCH ID
Presence
Range
H among the active DCHs simultaneously allocated for the same UE.
Semantics description
9.2.1.20A
The capacity consumption law indicates the CRNC how the Capacity Credit is consumed by NBAP set of procedures, depending on the [FD
[TDD allocated Spreading Factor on each DPCH and the assigned timeslot]. [FDD- In uplink, the reference spreading factor shall be the m
Request message (Min UL Channelisation Code length IE).].
This capacity consumption law indicates the consumption law to be used with the following procedures:
Radio Link Setup
Radio Link Addition
Radio Link Reconfiguration
Radio Link Deletion
[TDD - Physical Shared Channel
Reconfiguration]
For the Radio Link Setup and Radio Link Addition procedures, the cost given in the consumption law shall be debited from the Capacity Cr
Radio Link Deletion procedure. For the Radio Link Reconfiguration procedure, the difference of the consumption cost for the new spreadin
shall be debited from the Capacity Credit (or credited when this difference is negative).
If the modelling of the internal resource capability of the Node B is modelled independently for the Uplink and Downlink, the DL cost shall
Cost shall be applied to the UL Capacity Credit. If it is modelled as shared resources, both the DL costs" and the UL costs shall be applied to
[FDD - For a Radio Link creating a Radio Link Set (first RL of a RLS), the cost for the RL (cost 2) and RLS (cost 1) shall be taken into acco
RL cost (cost 2) shall be taken into account.
In the case of multiple Radio Links are established in one procedure, for every created Radio Link Set the first Radio Link is always the Rad
[FDD- When a PDSCH is allocated in the Radio Link Setup procedure, the processing cost associated to this PDSCH, equal to the DL cost
the processing cost of the radio links. In a similar way, this cost shall be credited to the Capacity Credit, when a PDSCH is deleted and the d
debited from the Capacity Credit (or credited if this difference is negative) when a PDSCH is reconfigured.]
[FDD- The costs given in the consumption law are the costs per channelization code. When multiple channelization codes are used by eithe
from the Capacity Credit shall be taken as N times the cost for one code, where N is the number of channelization codes.]
[TDD The cost for a radio link is a sum of the costs for each DPCH. For the first DPCH assigned to any user in a cell within a timeslot, the
a DPCH (cost 2) shall be taken into account. For any DPCH that is not the first DPCH assigned for any user in a cell within a timeslot, only
[TDD The cost for shared channels is a sum of the costs for each PDSCH and PUSCH assigned to a PUSCH or PDSCH set. For the first P
timeslot, the initial cost for a PDSCH/PUSCH in a timeslot (cost 1) and the cost for a PDSCH/PUSCH (cost 2) shall be taken into account.
assigned to any user in a cell within a timeslot, only the cost for a PDSCH/PUSCH (cost 2) shall be taken into account.
[TDD - In case of Physical Shared Channel Reconfiguration, the sum of the consumption cost of the each PDSCH/PUSCH of the previous c
sum of the consumption cost of each PDSCH/PUSCH of the new configuration shall be subtracted from the capacity credit.]
IE/Group Name
SF allocation law
Presence
Range
1..<MaxNumberOfSF>
>DL cost 1
>DL cost 2
>UL cost 1
>UL cost 2
Range bound
MaxNumberOfSF
Explanation
Maximum number of Spreading Factors
sumption Law
cedures, depending on the [FDD - allocated Spreading Factor and the RL/RLS situation]
spreading factor shall be the minimum spreading factor signalled in the Radio Link Setup
debited from the Capacity Credit, whereas it shall credited to the Capacity Credit for the
tion cost for the new spreading factor and the consumption cost for the old spreading factor
d Downlink, the DL cost shall be applied to the DL or Global Capacity Credit and the UL
he UL costs shall be applied to the DL or Global Capacity Credit.
cost 1) shall be taken into account. When adding a Radio Link to a Radio Link Set, only the
Radio Link is always the Radio Link with the lowest repetition number.]
PDSCH, equal to the DL cost RL, shall be debited from the Capacity Credit, in addition to
a PDSCH is deleted and the difference between the new cost and the old cost shall be
zation codes are used by either the radio links or the PDSCH, the cost credited to or debited
tion codes.]
in a cell within a timeslot, the initial cost for a DPCH in a timeslot (cost 1) and the cost for
a cell within a timeslot, only the cost for a DPCH (cost 2) shall be taken into account.
or PDSCH set. For the first PDSCH or PUSCH assigned to any user in a cell within a
) shall be taken into account. For any PDSCH/PUSCH that is not the first PDSCH/PUSCH
account.
SCH/PUSCH of the previous configuration shall be credited to the capacity credit, and the
apacity credit.]
Semantics description
[FDD - For each SF, cost of its allocation:
the first instance corresponds to SF = 4,
the second to SF = 8, the third to SF = 16
and so on.]
[TDD For each SF, cost of its allocation:
the first instance corresponds to SF = 1,
the second to SF = 2, the third to SF = 4
and so on.]
INTEGER
(0..65535)
INTEGER (0..65535)
INTEGER
(0..65535)
INTEGER (0..65535)
9.2.1.20B
The capacity credit indicates to the CRNC the Downlink or global capacity of a Local Cell or a Local Cell Group.
IE/Group Name
DL or Global Capacity
Credit
Presence
Range
Semantics description
al Cell Group.
9.2.1.20C
The DCH Information Response IE provides information for DCHs that have been established or modified.
IE/Group Name
Prese
nce
>DCH ID
>Binding ID
>Transport Layer Address
Range bound
MaxnoofDCHs
Range
IE type
and
reference
1 to <maxnoofDCHs>
M
O
O
Semantics descriptions
9.2.1.20
9.2.1.4
9.2.1.63
Explanation
Maximum number of DCH per UE.
Criticality
Assigned
Criticality
9.2.1.21
DL Power
The DL Power IE indicates a power level relative to the [FDD-primary CPICH power] [TDD-primary CCPCH power] configured in a cel
[FDD-If referred to a DPCH, it indicates the power of the transmitted DPDCH symbols].
IE/Group Name
DL Power
Presence
Range
9.2.1.22
The Dedicated Measurement Object type indicates the type of object that the measurement is to be performed on.
IE/Group Name
Dedicated Measurement
Object Type
Presence
Range
Semantics Description
9.2.1.23
The Dedicated Measurement Type identifies the type of measurement that shall be performed.
IE/Group Name
Dedicated Measurement
Type
Presence
Range
Note:
[4]
Semantics Description
RSCP, Rx Timing Deviation
are used by TDD only,
Round Trip Time, SIR Error
are used by FDD only.
9.2.1.24
The Dedicated Measurement Value shall be the most recent value for this measurement, for which the reporting criteria were met.
IE/Group Name
CHOICE Dedicated
Measurement Value
Presence
Range
>SIR Value
>>SIR value
INTEGER(0..63)
INTEGER(0..125)
INTEGER(0..127)
>RSCP
>>RSCP
INTEGER(0..127)
INTEGER(0..8191)
INTEGER(0..32767)
[22]
[23]
3GPP TS 25.133 (V3.3): Requirements for support of Radio Resource management (FDD).
3GPP TS 25.123 (V3.5): Requirements for support of Radio Resource management (TDD).
According to mapping in
[22] and [23]
FDD only
According to mapping in
[22]
According to mapping in
[22] and [23]
TDD only
According to mapping in
[23]
TDD only
According to mapping in
[23]
FDD only
According to mapping in
[22]
management (FDD).
management (TDD).
9.2.1.24
The Dedicated Measurement Value Information IE provides information both on whether or not the Dedicated Measurement Value is prov
not and if provided also the Dedicated Measurement Value itself.
IE/Group Name
CHOICE Measurement
Availability Indicator
Presence
Range
Semantics Description
>Measurement Available
>>Dedicated
Measurement Value
9.2.1.24
>>CFN
9.2.1.7
>Measurement not
Available
NULL
Dedicated Measurement
Time Reference
Assigned Criticality
9.2.1.25
The Diversity Control Field indicates if the current RL may, must or must not be combined with the already existing RLs.
IE/Group Name
Diversity Control Field
Presence
Range
9.2.1.26
Diversity Indication
The Diversity Indication indicates if the RL has been or has not been combined with another RL.
IE/Group Name
Diversity Indication
Presence
Range
Semantics description
9.2.1.27
DSCH ID
Presence
Range
Semantics description
9.2.1.27A
The DSCH Information Response IE provides information for DSCHs that have been established or modified.
IE/Group Name
DSCH Information
Response
Presence
>DSCH ID
>Binding ID
>Transport Layer Address
M
O
O
Range bound
MaxnoofDSCHs
Explanation
Maximum number of
DSCHs for one UE.
Range
1 to <Numof DSCH>
9.2.1.27
9.2.1.4
9.2.1.63
Semantics descriptions
Criticality
Assigned Criticality
9.2.1.28
Void
9.2.1.29
Void
9.2.1.29
Presence
Range
Semantics description
End of audit sequence = all
audit information has been
provided by the Node B;
Not end of audit sequence
= more audit information is
available;
9.2.1.29
FN reporting indicator
Presence
Range
Semantics description
9.2.1.30
This parameter indicates the priority level to be used during the lifetime of the DCH/DSCH for temporary restriction of the allocated resour
IE/Group Name
Frame Handling Priority
Presence
Range
9.2.1.31
Frame Offset
Frame Offset is the required offset between the dedicated channel downlink transmission frames (CFN, Connection Frame Number) and th
broadcast channel frame offset (Cell Frame Number). TheFrame_offsetisusedinthetranslationbetweenConnectionFrameNumber(CF
onIub/Iurandleastsignificant8bitsofSFN(SystemFrameNumber)onUu. The Frame Offset is UE and cell specific.
IE/Group Name
Frame Offset
Presence
Range
9.2.1.31A
IB_OC_ID
Presence
Range
Semantics description
9.2.1.32
IB_SG_DATA
Presence
Range
Semantics description
Contains SIB data fixed" or
"SIB data variable in
segment as encoded in ref:
[18].
9.2.1.33
IB_SG_POS
The lowest position of a specific Information Block segment in the SFN cycle (IB_SG_POS < IB_SG_REP).
IE/Group Name
IB_SG_POS
Presence
Range
Semantics description
Only even positions
allowed.
See ref. [18]
9.2.1.34
IB_SG_REP
Repetition distance for an Information Block segment. The segment shall be transmitted when SFN mod IB_SG_REP = IB_SG_POS.
IE/Group Name
IB_SG_REP
Presence
Range
9.2.1.35
IB Type
Presence
Range
Semantics description
9.2.1.36
Indication Type
The indication type shall indicate the category of a failure with respect to its impact on the logical resources supported at Node B.
IE/Group Name
Indication Type
Presence
Range
9.2.1.37
Void.
9.2.1.37
The Local Cell Group ID represents resources in the Node B, which has been pooled from a capacity point of view.
IE/Group Name
Local Cell Group ID
Presence
Range
point of view.
Semantics description
9.2.1.38
Local Cell ID
The local cell ID represents resources in Node B that can be used for the configuration of a cell.
IE/Group Name
Local Cell ID
Presence
Range
Semantics Description
9.2.1.39
This parameter indicates the maximum DL power capability for a local cell within Node B. The reference point is the antenna connector.
IE/Group Name
Maximum DL Power
Capability
Presence
Range
9.2.1.40
Maximum Transmission Power is maximum power for all downlink channels added together, that is allowed to be used simultaneously in a
IE/Group Name
Maximum transmission
Power
Presence
Range
allowed to be used simultaneously in a cell. The reference point is the antenna connector.
Semantics Description
Unit dBm
Granularity 0.1 dB
0: 0 dBm
1: 0.1 dBm
9.2.1.40
Presence
Range
Semantics description
9.2.1.41
The Measurement Filter Coefficient determines the amount of filtering to be applied for measurements.
IE/Group Name
Measurement Filter
Coefficient
Presence
Range
Semantics description
9.2.1.42
Measurement ID
The Measurement ID uniquely identifies any measurement per (Node B- or communication) control port.
IE/Group Name
Measurement ID
Presence
Range
Semantics Description
9.2.1.43
The Measurement Increase/Decrease Threshold defines the threshold that shall trigger Event C or D.
Information Element /
Group Name
Presence
Range
CHOICE
Increase/Decrease
Threshold
>Received Total Wide
Band Power
>>Received total wide
band power
INTEGER(0..620)
INTEGER(0..100)
INTEGER(0..240,)
INTEGER(0..126)
>SIR
>>SIR
INTEGER(0..62)
>SIR Error
>>SIR Error
INTEGER(0..124)
INTEGER(0..112,)
INTEGER(0..126)
>Transmitted Carrier
Power
>>Transmitted Carrier
Power
>Acknowledged PRACH
Preambles
>>Acknowledged
PRACH Preambles
>RSCP
>>RSCP
>>RSCP
INTEGER(0..126)
INTEGER(0..32766)
INTEGER(0..15,)
INTEGER(0..240,)
>Acknowledged PCPCH
Access Preambles
>>Acknowledged
PCPCH Access
Preambles
>Detected PCPCH Access
Preambles
>>Detected PCPCH
Access Preambles
[22]
[23]
3GPP TS 25.133 (V3.3): Requirements for support of Radio Resource management (FDD).
3GPP TS 25.123 (V3.5): Requirements for support of Radio Resource management (TDD).
Semantics Description
0: 0 dB
1: 0.1 dB
2: 0.2 dB
620: 62dB
According to mapping in
[22] and [23]
FDD only
According to mapping in
[22]
TDD only
0: 0 dB
1: 0.5 dB
2: 1 dB
126: 63 dB
0: 0 dB
1: 0.5 dB
2: 1 dB
62: 31dB
FDD only
0: 0 dB
1: 0.5 dB
2: 1 dB
0: 0 dB
1: 0.5 dB
2: 1 dB
112: 56 dB
TDD only
0: 0 dB
1: 0.5 dB
2: 1 dB
126: 63 dB
FDD only
0: 0 chips
1: 0.0625 chips
2: 0.1250 chips
According to mapping in
[22]
FDD only
According to mapping in
[22]
9.2.1.44
Measurement Threshold
The Measurement Threshold defines which threshold that shall trigger Event A, B, E or F.
Information Element / Group Name
CHOICE Measurement Threshold
>Received Total Wide Band Power
>>Received total wide band power
>Transmitted Carrier Power
>>Transmitted Carrier Power
>Acknowledged PRACH Preambles
>>Acknowledged PRACH Preambles
>UL Timeslot ISCP
>>UL Timeslot ISCP
>SIR
>>SIR
>SIR Error
>>SIR Error
>Transmitted Code Power
>>Transmitted Code Power
>RSCP
>>RSCP
>Rx Timing Deviation
>>Rx Timing Deviation
>Round Trip Time
>>Round Trip Time
>Acknowledged PCPCH Access Preambles
>>Acknowledged PCPCH Access Preambles
>Detected PCPCH Access Preambles
>>Detected PCPCH Access Preambles
[22]
[23]
Presen
ce
Range
INTEGER(0..621)
INTEGER(0..100)
INTEGER(0..240,)
INTEGER(0..127)
INTEGER(0..63)
INTEGER(0..125)
INTEGER(0..127)
INTEGER(0..127)
INTEGER(0..8191)
INTEGER(0..32767)
INTEGER(0..15,)
INTEGER(0..240,)
t Threshold
Semantics Description
9.2.1.45
Message Discriminator
This field is used to discriminate between Dedicated NBAP and Common NBAP messages.
IE/Group Name
Message Discriminator
Presence
Range
Semantics description
9.2.1.45
Message Structure
The Message Structure IE gives information for each level with assigned criticality in an hierachical message structure from top level dow
level for the occured error (reported in the Information Element Criticality Diagnostics IE).
IE/Group Name
Presence
Message structure
>IE ID
maxnooflevels
1 to
<maxnooflevels>
>Repetition Number O
Range bound
Range
INTEGER (0..65535)
INTEGER (1..256)
Explanation
Maximum no. of message levels to report. The value for
maxnooflevels is 256.
criticality in an hierachical message structure from top level down to the lowest level above the reported
orted in the Information Element Criticality Diagnostics IE).
Semantics description
Criticality
Assigned
Criticality
GLOBAL
ignore
9.2.1.46
Message Type
M
M
Presence
>Ddmode
Type of Message
Range
1
essage Type
ge being sent.
IE type and reference
ENUMERATED (
COMMON TRANSPORT CHANNEL SETUP,
COMMON TRANSPORT CHANNEL RECONFIGURATION,
COMMON TRANSPORT CHANNEL DELETION,
BLOCK RESOURCE,
UNBLOCK RESOURCE,
AUDIT REQUIRED,
AUDIT,
COMMON MEASUREMENT INITIATION,
COMMON MEASUREMENT REPORTING,
COMMON MEASUREMENT TERMINATION,
COMMON MEASUREMENT FAILURE,
CELL SETUP,
CELL RECONFIGURATION,
CELL DELETION,
RESOURCE STATUS INDICATION,
SYSTEM INFORMATION UPDATE,
RL SETUP,
RL ADDITION,
SYNCHRONISED RL RECONFIGURATION PREPARATION,
SYNCHRONISED RL RECONFIGURATION COMMIT,
SYNCHRONISED RL RECONFIGURATION CANCELLATION,
UNSYNCHRONISED RL RECONFIGURATION,
RL DELETION,
DL POWER CONTROL,
DL POWER TIMESLOT CONTROL,
DEDICATED MEASUREMENT INITIATION,
DEDICATED MEASUREMENT REPORTING,
DEDICATED MEASUREMENT TERMINATION,
DEDICATED MEASUREMENT FAILURE,
RL FAILURE,
RL RESTORATION,
COMPRESSED MODE COMMAND,
ERROR INDICATION,
PHYSICAL SHARED CHANNEL RECONFIGURATION,
RESET,
)
ENUMERATED (FDD, TDD, Common, )
ENUMERATED (Initiating Message, Successful Outcome, Unsuccessful
Outcome, Outcome)
Semantics description
Common = common to
FDD and TDD.
9.2.1.46
This parameter indicates the minimum DL power capability for a local cell within Node B. The reference point is the antenna connector.
IE/Group Name
Minimum DL Power
Capability
Presence
Range
9.2.1.47
This parameter indicates the minimum spreading factor supported at a cell within the Node B.
IE/Group Name
Minimum Spreading Factor
Presence
Range
Semantics description
9.2.1.47
N_INSYNC_IND
This parameter defines the number of successive in-sync indications after which the Node B shall trigger the Radio Link Restore procedure
Information
Element/Group Name
N_INSYNC_IND
Presence
Range
gger the Radio Link Restore procedure (see also ref. [10] and [21]).
Semantics description
9.2.1.47
N_OUTSYNC_IND
This parameter defines the number of consecutive out-of-sync indications after which the timer T_RLFAILURE shall be started (see also re
Information
Element/Group Name
N_OUTSYNC_IND
Presence
Range
9.2.1.48
The Node B Communication Context ID is the identifier of the Communication Context in the Node B, it corresponds to the dedicated reso
an UE using one or more dedicated channels in a given Node B.
IE/Group Name
Node B Communication
Context ID
Presence
Range
(0..2^20-1)
9.2.1.49
Presence
Range
Semantics description
9.2.1.49
PICH Power
The PICH Power IE indicates a power level relative to the [FDD-primary CPICH power] [TDD-primary CCPCH power] configured in a cel
IE/Group Name
PICH Power
Presence
Range
9.2.1.50
Puncture Limit
The Puncture limit limits the amount of puncturing that can be applied in order to minimise the number of dedicated physical channels.
IE/Group Name
Puncture limit
Presence
Range
14: 96%
15: 100% (no puncturing)
9.2.1.50
QE-Selector
The QE-Selector indicates from which source the value for the quality estimate (QE) shall be taken.
IE/Group Name
QE-Selector
Presence
Range
Semantics description
9.2.1.51
Report Characteristics
Presence
Range
NULL
M
>Event A
>>Measurement Threshold M
Measurement Threshold
9.2.1.44
>>Measurement Hysteresis O
Time
>Event B
>>Measurement Threshold M
Measurement Threshold
9.2.1.44
>>Measurement Hysteresis O
Time
>Event C
>>Measurement
Increase/Decrease
Threshold
>>Measurement Change
Time
>Event D
>>Measurement
Increase/Decrease
Threshold
>>Measurement Change
Time
9.2.1.43
M
9.2.1.43
M
>Event E
>>Measurement Threshold M
1
ENUMERATED (10ms1min,)
step 10ms,
Measurement Threshold
9.2.1.44
>>Measurement Threshold O
2
Measurement Threshold
>>Measurement Hysteresis O
Time
ENUMERATED (10ms1min,)
step 10ms,
ENUMERATED (10ms1min,) step 10ms,
>>Report Periodicity
9.2.1.44
Measurement Threshold
9.2.1.44
>>Measurement Threshold O
2
Measurement Threshold
>>Measurement Hysteresis O
Time
ENUMERATED (10ms1min,)
step 10ms,
ENUMERATED (10ms1min,) step 10ms,
>Report Periodicity
9.2.1.44
>Report Periodicity
O
(1min1hr,) step 1min,
Semantics Description
The frequency with which the Node B shall send measurement reports.
The threshold for which the Node B shall trigger a measurement report.
The threshold for which the Node B shall trigger a measurement report.
The time the measurement entity shall rise on (in ms), in order to trigger a
measurement report.
The time the measurement entity shall fall (in ms), in order to trigger a measurement
report.
The frequency with which the Node B shall send measurement reports.
9.2.1.52
The resource operational state is used to indicate the current operational state of the associated resource following a Node B failure.
IE/Group Name
Resource Operational
State
Presence
Range
9.2.1.53
RL ID
Presence
Range
Semantics description
9.2.1.53
SFN
Presence
Range
Semantics description
9.2.1.53
Segment type
Presence
Range
Semantics description
9.2.1.55
SIB Originator
Presence
Range
Semantics description
9.2.1.56
Shutdown Timer
The shutdown timer shall indicate the length of time available to the CRNC to perform the block of a resource when a Normal priority bloc
IE/Group Name
Shutdown Timer
Presence
Range
9.2.1.56
T_RLFAILURE
The Radio Link Failure procedure shall be triggered after a period of time T_RLFAILURE has elapsed with a persisting out-of-sync indicati
Information
Element/Group Name
T_RLFAILURE
Presence
Range
ed with a persisting out-of-sync indication (see also ref. [10] and [21]).
Semantics description
In seconds
9.2.1.56
Indicates if the AUDIT REQUEST message initiates a new audit sequence or not.
IE/Group Name
Start Of Audit Sequence
Indicator
Presence
Range
Semantics description
9.2.1.57
TFCI Presence
The TFCI Presence parameter indicates whether the TFCI shall be included. In TDD if it is present in the timeslot, it will be included with
the first Channelization code listed.
IE/Group Name
TFCI presence
Presence
Range
9.2.1.58
The Transport Format Combination Set is defined as a set of Transport Format Combinations on a Coded Composite Transport Channe
Transport Channels. The DL Transport Format Combination Set is applicable for DL Transport Channels.
[FDD - Where the UE is assigned access to one or more DSCH transport channels then the UTRAN has the choice of two methods for
Method #1 - TFCI range
The mapping is described in terms of a number of groups, each group corresponding to a given transport format combination (value of C
values of TFCI(field 2) between 0 and the specified 'Max TFCI(field2) value'. The CTFC(field2) value specified in the second group ap
specified in the last group plus one and the specified 'Max TFCI(field2) value' in the second group. The process continues in the same
constructing its mapping table starting at the largest value reached in the previous group plus one.
Method #2 - Explicit
The mapping between TFCI(field 2) value and CTFC(field2) is spelt out explicitly for each value of TFCI (field2) ]
IE/Group Name
Presence
Range
CHOICE DSCH
>No split in TFCI
>>TFCS
1 to <maxnoofTFCs>
>>>CTFC
>>>CHOICE Gain Factors
>>>>Signalled Gain Factors
>>>>>CHOICE Mode
>>>>>>FDD
>>>>>>>Gain Factor C
>>>>>>>Gain Factor D
M
C-PhysChan
M
M
>>>>>>TDD
>>>>>>>Gain Factor
>>>>>Reference TFC nr
>>>>Computed Gain Factors
>>>>>Reference TFC nr
M
O
M
>>>CTFC(field1)
>>Choice Signalling method
>>>TFCI range
>>>>TFC mapping on DSCH
1 to <MaxTFCI_1_Combs>
1 to <MaxNoTFCIGroups>
>>>>>CTFC(field2)
>>>Explicit
>>>>Transport format combination_DSCH
>>>>>CTFC(field2)
Condition
PhysChan
Range bound
MaxnoofTFCs
MaxTFCI_1_Combs
MaxTFCI_2_Combs
MaxNoTFCIGroups
MaxCTFC
1 to <MaxTFCI_2_Combs>
Explanation
The IE shall be present if the TFCS concerns a UL DPCH or PRACH
channel [FDD or PCPCH channel].
Explanation
The maximum number of Transport Form
Maximum number of TFCI (field 1) combinations (given by 2 raised to
Maximum number of TFCI (field 2) combinations (given by 2 raised to
Maximum number of groups, each group described in terms of a range of TFCI(field
Maximum number of the CTFC value is calculated
ons on a Coded Composite Transport Channel. It is the allowed Transport Format Combinations of the corresponding
sport Channels.
e UTRAN has the choice of two methods for signalling the mapping between TFCI(field 2) values and the corresponding TFC:
iven transport format combination (value of CTFC(field2)). The CTFC(field2) value specified in the first group applies for all
ield2) value specified in the second group applies for all values of TFCI(field 2) between the 'Max TFCI(field2) value'
d group. The process continues in the same way for the following groups with the TFCI(field 2) value used by the UE in
us one.
Semantics description
This choice is made if :
a) The TFCS refers to the uplink
OR
b) The mode is FDD and none of the Node B communication contexts are assigned
any DSCH transport channels
OR
c) The mode is TDD
The first instance of the parameter corresponds to TFCI zero, the second to 1 and
so on.
INTEGER(0..MaxCTFC)
Integer (0..15)
Integer (0..15)
Integer (0..15)
Integer (0..3)
Integer (0..3)
Indicates the reference TFC to be used to calculate the gain factors for this TFC
This choice is made if :
a) The TFCS refers to the downlink
AND
b) The mode is FDD and one of the Node B communication contexts is assigned
one or more DSCH transport channels
The first instance of the parameter Transport format combination_DCH corresponds
to TFCI (field 1) = 0, the second to TFCI (field 1) = 1 and so on.
Integer(0..MaxCTFC)
Integer number calculated according to [18]. The calculation of CTFC ignores any
DSCH transport channels which may be assigned
Integer(1..1023)
This is the Maximum value in the range of TFCI(field2) values for which the
specified CTFC(field2) applies
Integer(0..MaxCTFC)
Integer number calculated according to [18]. The calculation of CTFC ignores any
DCH transport channels which may be assigned
The first instance of the parameter Transport format combination_DSCH
corresponds to TFCI (field2) = 0, the second to TFCI (field 2) = 1 and so on.
Integer(0..MaxCTFC)
Integer number calculated according to [18]. The calculation of CTFC ignores any
DCH transport channels which may be assigned
Explanation
The maximum number of Transport Format Combinations.
CI (field 1) combinations (given by 2 raised to the power of the length of the TFCI (field 1))
CI (field 2) combinations (given by 2 raised to the power of the length of the TFCI (field 2))
up described in terms of a range of TFCI(field 2) values for which a single value of CTFC(field2) applies
mum number of the CTFC value is calculated according to the following:
( Li 1 ) Pi
i=1
9.2.1.59
The Transport Format Set is defined as the set of Transport Formats associated to a Transport Channel, e.g. DCH.
IE/Group Name
Dynamic Transport Format
Information
Presence
C Blocks
>CHOICE Mode
>>TDD
>>>Transmission Time interval
Information
Range
1 to
<maxTFcount>
INTEGER
(0..512)
INTEGER
(0..5000)
C-TTIdynamic
1 to <maxTTIcount>
ENUMERATED
(10, 20, 40, 80, dynamic,)
ENUMERATED
(No coding, Convolutional, Turbo,
)
>Coding Rate
C Coding
>CRC size
ENUMERATED
(1/2, 1/3,)
INTEGER
(1..maxRM)
ENUMERATED
(0, 8, 12, 16, 24,)
>CHOICE Mode
>>TDD
>>>2nd interleaving mode
Condition
Enumerated(Frame
Timeslot related,)
related,
Blocks
Explanation
The IE shall be present if the Number of Transport Blocks IE is set to a value greater than 0
Coding
The IE shall be present if the Type of channel coding IE is set to "Convolutional" or "Turbo"
TTIdynamic
The IE shall be present if the Transmission Time Interval IE in the Semi-static Transport Format Info
IE is set to dynamic.
Range bound
MaxTFcount
MaxRM
MaxTTIcount
Explanation
Maximum number of different transport formats that can be included in the Transport format set f
transport channel.
Maximum number that could be set as rate matching attribute for a transport channel.
The amount of different TTI that are possible for that transport format.
Semantics description
The first instance of the
parameter corresponds to
TFI zero, the second to 1
Bits
ms
ms
Value dynamic for TDD
only
9.2.1.60
ToAWE
TOAWE is the window endpoint. DL data frames are expected to be received before this window endpoint. TOAWE is defined with a posit
value relative Latest Time of Arrival (LTOA). A data frame arriving after TOAWE gives a Timing Adjustment Control frame response.
IE/Group Name
ToAWE
Presence
Range
9.2.1.61
ToAWS
TOAWS is the window startpoint. DL data frames are expected to be received after this window startpoint. TOAWS is defined with a positi
value relative Time of Arrival Window Endpoint (TOAWE). A data frame arriving before TOAWS gives a Timing Adjustment Control fram
response.
IE/Group Name
ToAWS
Presence
Range
9.2.1.62
Transaction ID
The transaction ID is used to associate all the messages belonging to the same procedure Messages belonging to the same procedure shall u
the same transaction ID.
The transaction ID is determined by the initiating peer of a procedure. For common procedures the transaction ID shall uniquely identify a
procedure within all ongoing parallel procedures initiated by one protocol peer, using the same procedure code and signalled over the same
Node B control port. For dedicated procedures the transaction ID shall uniquely identify a procedure within all ongoing parallel procedures
initiated by one protocol peer, using the same procedure code and initiated towards the same Node B/CRNC context.
IE/Group Name
Transaction ID
Presence
Range
9.2.1.62A
Indicates whether a new transport bearer needs to be established for carrying the concerning transport channel.
IE/Group Name
Transport Bearer Request
Indicator
Presence
Range
Semantics description
9.2.1.63
Transport Layer Address defines the transport address of the Node B. For details on the Transport Address used see ref. [2].
IE/Group Name
Transport Layer Address
Presence
Range
9.2.1.64
TSTD Indicator
Presence
Range
Semantics description
9.2.1.65
UARFCN
Presence
Range
INTEGER (0..16383, )
Semantics Description
corresponds to 0.0Hz..
3276.6MHz
(subclause 5.4.3 in [14]
and [15])
9.2.1.65A
UL Capacity Credit
The capacity credit indicates to the CRNC the Uplink capacity of a Local Cell or a Local Cell Group.
IE/Group Name
UL Capacity Credit
Presence
Range
Semantics description
9.2.1.66
UL FP Mode
This parameter defines if normal or silent mode of the Frame Protocol shall be used for the UL.
IE/Group Name
UL FP Mode
Presence
Range
Semantics description
9.2.2.A
Defines the parameters for the compressed mode gap pattern sequence activation. For details see ref. [18].
IE/Group Name
CM Configuration Change
CFN
Presence
Range
9.2.1.7
Transmission Gap
Pattern Sequence Status
0 to <MaxTGPS>
>TGPSI Identifier
Integer(1..<MaxTGPS>)
>TGPRC
Integer (0..511)
>TGCFN
CFN
9.2.1.7
Range bound
MaxTGPS
Explanation
Maximum number of active pattern
sequences. Value 6.
9.2.2.B
Adjustment Period
Presence
Range
Semantics description
Frames
9.2.2.C
Adjustment Ratio
Adjustment Ratio IE (Radj) defines the convergence rate used for the associated Adjustment Period.
IE/Group Name
Adjustment Ratio
Presence
Range
(0 .. 100)
Semantics description
The Adjustment Ratio is
given with a granularity of
0.01
0 -> 0.00
1 -> 0.01
...
100 -> 1.00
9.2.2.D
AICH Power
The AICH Power IE indicates a power level (measured as the power per transmitted acquisition indicator when several AIs are transmitted i
IE/Group Name
AICH Power
Presence
Range
ator when several AIs are transmitted in parallel) relative to the primary CPICH power configured in a cell.
Semantics description
Offset in dB
9.2.2.1
IE/Group Name
AICH Transmission Timing
Range
Semantics description
See parameter
AICH_Transmission_Timin
g in ref. [7].
9.2.2.1A
Information
Element/Group Name
AP Preamble Signature
AP Preamble Signature
Presence
Range
Semantics description
Described in ref. [9]
9.2.2.1B
Information
Element/Group Name
AP Sub Channel Number
Range
Semantics description
Described in ref. [10]
9.2.2.1C
Information
Element/Group Name
CD Sub Channel Numbers
Range
Semantics description
Each bit indicates
availability for a
subchannel, where the
subchannels are numbered
subchannel 0 to
subchannel 11. The value
1 of a bit indicates that the
corresponding subchannel
is available and the value 0
indicates that it is not
available. The order of bits
is to be interpreted
according to subclause
9.3.4. See also [10].
9.2.2.1D
The Channel Assingment Indication indicates whether CA is active or inactive. When CA is active, CPCH is in Versatile Channel Assingme
IE/Group Name
Channel Assignment
Indication
Presence
Range
PCH is in Versatile Channel Assingment Method (VCAM) mode and when CA is inactive, CPCH is in UE Channel Selection Method (UCSM) mode. In
Semantics description
el Selection Method (UCSM) mode. In VCAM mode (CA active), CA message in CD/CA-ICH shall be sent.
9.2.2.2
Chip Offset
The Chip Offset is defined as the radio timing offset inside a radio frame. The Chip offset is used as offset for the DL DPCH relative to the
IE/Group Name
Chip Offset
Presence
Range
9.2.2.2A
Indicates when the phase/amplitude adjustment is performed in the DL in relation to the receipt of the UL feedback command in case of clo
Information
Element/Group Name
Closed Loop Timing
Adjustment Mode
Presence
Range
g Adjustment Mode
9.2.2.3
Void
9.2.2.3A
Compressed Mode Deactivation Flag indicates whether Compressed Mode shall be deactivated or not in the new RL.
IE/Group Name
Compressed Mode
Deactivation flag
Presence
Range
9.2.2.4A
IE/Group Name
CPCH Allowed Total Rate
Range
Semantics description
Channel Symbol Rate
(ksps)
9.2.2.4B
Information
Element/Group Name
CPCH Scrambling Code
Number
Range
Semantics description
Described in ref. [9]
9.2.2.4C
Indicates the slot format used in UL CPCH message control part, accordingly to ref. [7]
IE/Group Name
CPCH UL DPCCH slot
format
Presence
Range
Semantics description
9.2.2.4D
Presence
Range
1 to <maxnoofDCHs>
9.2.1.49
>UL FP mode
>ToAWS
>ToAWE
>DCH Specific Info
>>DCH ID
>>Transport Format Set
M
M
M
9.2.1.66
9.2.1.61
9.2.1.60
M
M
9.2.1.20
9.2.1.59
9.2.1.59
>>Allocation/Retention
Priority
9.2.1.1A
>>Frame Handling
Priority
9.2.1.30
>>QE-Selector
9.2.1.50A
Range bound
MaxnoofDCHs
1..<maxnoofDCHs>
Explanation
Maximum number of DCHs
for one UE.
Document
Semantics descriptions
Criticality
For UL
For DL
Document
Assigned Criticality
9.2.2.4E
Presence
Range
1..<maxnoofDCHs>
9.2.1.66
9.2.1.61
9.2.1.60
9.2.1.62A
O
O
O
M
M
O
9.2.1.20
9.2.1.59
9.2.1.59
>>Allocation/Retention
Priority
9.2.1.1A
>>Frame Handling
Priority
9.2.1.20
Range bound
MaxnoofDCHs
1..<maxnoofDCHs>
Explanation
Maximum number of DCHs
for one UE.
Semantics descriptions
Criticality
Assigned Criticality
9.2.2.9
Diversity mode
Presence
Range
Semantics description
9.2.2.10
Indicates the slot format used in DPCH in DL, accordingly to ref. [7].
IE/Group Name
DL DPCH slot format
Presence
Range
Semantics description
9.2.2.12
Void
9.2.2.12
DL_power_averaging_window_size
DL_power_averaging_window_size IE defines the window size when Limited Power Increase is used [10].
IE/Group Name
DL_power_averaging_wind
ow_size
Presence
Range
Semantics description
1-60 inner loop power
adjustments, step size 1
adjustment
9.2.2.13
DL Scrambling Code
DL scrambling code to be used by the RL. One cell may have multiple DL scrambling codes available.
IE/Group Name
DL Scrambling Code
Presence
Range
Semantics description
0= Primary scrambling
code of the cell
115= Secondary
scrambling code
9.2.2.13A
The DL TPC pattern 01 count IE contains the value of the parameter n, which is used for determining the DL TPC pattern on Radio Links m
IE/Group Name
DL TPC pattern 01 count
Presence
Range
g the DL TPC pattern on Radio Links marked with "first RLS" by the First RLS indicator IE before UL synchronisation is achieved.
Semantics description
tion is achieved.
9.2.2.13
Presence
Range
M
M
M
9.2.1.27
9.2.1.59
9.2.1.1A
M
M
M
9.2.1.30
9.2.1.61
9.2.1.60
Range bound
MaxnoofDSCHs
1 to <maxnoofDSCHs>
Explanation
Maximum number of DSCHs for one
UE.
Semantics descriptions
For DSCH
Criticality
Assigned Criticality
9.2.2.14
The DL Channelisation Code Number indicates the DL Channelisation Code number for a specific DL physical channel.
IE/Group Name
FDD DL
ChannelisationCode
Number
Presence
Range
[9]
L physical channel.
Semantics description
According to the mapping
in [9].
The maximum value is
equal to the DL spreading
factor 1
9.2.2.14A
The FDD DL Code Information IE provides DL Code information for the RL.
IE/Group Name
FDD DL Code Information
>DL Scrambling Code
>FDD DL Channelisation Code Number
>Transmission Gap Pattern Sequence
Code Information
Range bound
MaxnoofCodes
Presence
Range
1 to <maxnoof-Codes>
M
M
9.2.2.13
9.2.2.14
9.2.2.53B
Explanation
Maximum number of DL code information.
Semantics descriptions
Criticality
Assigned Criticality
9.2.2.15
The Secondary CCPCH offset is defined as the time offset towards the Primary CCPCH in the cell. The offset is a multiple of 256 chips.
IE/Group Name
FDD SCCPCH Offset
Presence
Range
9.2.2.16
Presence
Range
Semantics description
9.2.2.16
The First RLS Indicator IE indicates if a specific Radio Link and all Radio Links which are part of the same Radio Link Set, shall be consid
IE/Group Name
First RLS Indicator
Presence
Range
e same Radio Link Set, shall be considered as the first radio links established towards the UE or not.
Semantics description
9.2.2.18A
The parameter is used for a more efficient use of the inner loop DL power control for non real time data.
If the limited power increase is used, Node B shall use the limited power increase algorithm as specified in [10], subclause 5.2.
IE/Group Name
Limited Power Increase
Presence
Range
9.2.2.18
The Inner Loop DL PC Status IE indicates whether inner loop DL control shall be active or inactive for all radio links associated with the
context identified by the Node B Communication Context Id IE.
IE/Group Name
Inner Loop DL PC Status
Presence
Range
9.2.2.20
Defines the maximum allowed value for the change of DL power level during a certain number of slots that can be utilised by the downlin
power balancing algorithm. Max Adjustment Step IE defines a time period, in terms of number of slots, in which the accumulated power
adjustment shall be maximum 1dB. This value does not include the DL inner loop PC adjustment.
IE/Group Name
Max Adjustment Step
Presence
Range
9.2.2.20
IE/Group Name
Max Number of PCPCHes
Range
Semantics description
9.2.2.21
Maximum number of uplink DPDCHs to be used during the connection. Needed by the rate matching algorithm.
IE/Group Name
Max Number of UL
DPDCHs
Presence
Range
Semantics description
9.2.2.22
Minimum UL channelisation code length (spreading factor) of a DPDCH which is used during the connection. Needed by rate matching alg
IE/Group Name
Min UL Channelisation
Code length
Presence
Range
9.2.2.23
Multiplexing Position
Multiplexing Position specifies whether fixed or flexible positions of transport channels shall be used in the physical channel.
IE/Group Name
Multiplexing Position
Presence
Range
9.2.2.23
N_EOT
The N_EOT is defined as number of End of Transmission for release of PCPCH transmission.
IE/Group Name
N_EOT
Presence
Range
Semantics description
TTI
Value 8 is never used in
this release.
9.2.2.23
NF_max
The NF_max is defined as maximum number of Frame in a PCPCH message data part.
IE/Group Name
NF_max
Presence
Range
Semantics description
9.2.2.23
N_Start_Message
The N_Start_Message is defined as number of Frames for start message of DL DPDCHes for a CPCH.
IE/Group Name
N_Start_Message
Presence
Range
Semantics description
9.2.2.24
IE/Group Name
PD
Range
Semantics description
Frames
If the value is set to 0, the
Pattern Duration shall be
interpreted as infinite
9.2.2.24
PCP Length
Presence
Range
Semantics description
9.2.2.25
This IE indicates the association between each possible value of TFCI(field 2) and the corresponding PDSCH channelisation code(s). There
ways that the UTRAN must choose between in order to signal the mapping information, these are described below. The signalling capacity c
will vary depending on the way in which the UTRAN configures usage of the DSCH. A fourth option is also provided which allows the UTR
the TFCI(field 2) to PDSCH code mapping table with new PDSCH code values.
Method #1 - Using code range
The mapping is described in terms of a number of groups, each group associated with a given spreading factor. Each TFCI(field2) value cor
channelisation code or set of PDSCH codes for multi-code. The Node B maps TFCI(field2) values to PDSCH codes in the following way:
-
The PDSCH codes used for TFCI(field 2) = 0 are given by the SF of the Code Group 1 (i.e. first instance in PD
numbers between CodeNumber0 (where CodeNumber0 = "Start code number" of Code Group 1) and CodeNum
This continues with unit increments in the value of TFCI (Field2) mapped to either unit increments in code num
numbers in case of multi-code, this until "Stop code number" is reached:
So the PDSCH codes used for TFCI(field 2) = k (for k > 0 and k < ("Stop code number" "Start code number"+ 1) DIV k) are given by the S
numbers between CodeNumberk = CodeNumberk-1 + "multi-code info" and CodeNumberk + "multicode info" - 1.
If "Stop code number" = "Start code number"+ "multi-code info" 1 then this is to be interpreted as defining the mapping between the chan
-
The Node B constructs its mapping table by repeating this process for all the Code Groups in the order they are
mapping. The first TFCI(field 2) value used in each group is the largest TFCI(field 2) value reached in the prev
Note: This imposes that "Stop code number" "Start code number"+ 1 is a multiple of the value "multi code info" for each instance of PDSC
the case where multi-code is not used, then "multi-code info" = 1 and the process above also applies.
Method #2 - Using TFCI range
The mapping is described in terms of a number of groups, each group corresponding to a given PDSCH channelisation code or codes for mu
-
The set of PDSCH codes specified in the first instance applies for all values of TFCI(field 2) between 0 and the
The process continues in the same way for the following groups with the TFCI(field 2) value starting at the larg
instance incremented by one.
So the set of PDSCH codes specified in a given instance apply for all the values of TFCI(field 2) between the "Max TFCI(field2) value" spe
incremented by one and the specified "Max TFCI(field2)" of the considered instance.
A set of PDSCH codes is composed of all the codes between "Code Number" and "Code Number" + "multicode" 1. So if multi-code is no
reduced to one element indicated by the Code Number IE.
Method #3 - Explicit
The mapping between TFCI(field 2) value and PDSCH channelisation code (or a set of PDSCH codes for multicode) is spelt out explicitly f
A set of PDSCH codes is composed of all the codes between "Code Number" and "Code Number" + "multicode" 1. So if multi-code is no
reduced to one element indicated by the Code Number IE.
Method #4 - Replace
The "TFCI (field2)" value(s) for which the mapping to PDSCH channelisation code (or a set of PDSCH codes for multicode) is changed are
the new mapping between TFCI(field 2) value and PDSCH channelisation code(s) is spelt out explicitly for each value of TFCI (field2).
A set of PDSCH codes is composed of all the codes between "Code Number" and "Code Number" + "multicode" 1. So if multi-code is no
reduced to one element indicated by the Code Number IE.
Information
Element/Group name
Presence
DL Scrambling
Code
Range
(0..15)
1..<MaxNoCodeGroups>
M
>>>multi-code info
M
>>>Start code number M
Integer(1..16)
Integer(0..maxCodeNumCo
mp-1)
Integer(0..maxCodeNumCo
mp-1)
>TFCI range
>>DSCH mapping
1..<MaxNoTFCIGroups>1
>>>Max TFCI(field2)
value
Integer(1..1023)
>>>Spreading factor
>>>multi-code info
>>>Code number
M
M
Integer(1..16)
Integer(0..maxCodeNumCo
mp-1)
>Explicit
>>PDSCH code
1..<MaxTFCI_2_Combs>
>>>Spreading factor
>>>multi-code info
>>>Code number
M
M
Integer(1..16)
Integer(0..maxCodeNumCo
mp-1)
>Replace
>>Replaced PDSCH
code
1..<MaxTFCI_2_Combs>
>>>TFCI (field2)
Integer (0..1023)
>>>Spreading factor
M
M
Integer(1..16)
Integer(0..maxCodeNumCo
mp-1)
>>>multi-code info
>>>Code number
Range Bound
MaxCodeNumComp
Explanation
Maximum number of codes at the defined spreading factor, within the
complete code tree.
MaxTFCI_2_Combs
MaxNoTFCIGroups
MaxNoCodeGroups
y the SF of the Code Group 1 (i.e. first instance in PDSCH code mapping) and the code
"Start code number" of Code Group 1) and CodeNumber0 + "multicode info" - 1.
(Field2) mapped to either unit increments in code numbers or groups of contiguous code
ber" is reached:
er" "Start code number"+ 1) DIV k) are given by the SF of the Code Group 1 and the code
berk + "multicode info" - 1.
interpreted as defining the mapping between the channelisation code(s) and a single TFCI.
s process for all the Code Groups in the order they are instantiated in PDSCH code
p is the largest TFCI(field 2) value reached in the previous group incremented by one.
the value "multi code info" for each instance of PDSCH code mapping. Furthermore, in
ve also applies.
pplies for all values of TFCI(field 2) between 0 and the specified "Max TFCI(field2)".
groups with the TFCI(field 2) value starting at the largest value reached in the previous
CI(field 2) between the "Max TFCI(field2) value" specified in the previous instance
ode Number" + "multicode" 1. So if multi-code is not used, the set of PDSCH codes is
of PDSCH codes for multicode) is spelt out explicitly for each value of TFCI (field2).
ode Number" + "multicode" 1. So if multi-code is not used, the set of PDSCH codes is
or a set of PDSCH codes for multicode) is changed are explicitely signalled. Furthermore,
spelt out explicitly for each value of TFCI (field2).
ode Number" + "multicode" 1. So if multi-code is not used, the set of PDSCH codes is
Semantics description
Scrambling code on which PDSCH is transmitted.
0= Primary scrambling code of the cell
115 = Secondary scrambling code
This is the maximum value in the range of TFCI(field 2) values for which the
specified PDSCH code applies
SF of PDSCH code
9.2.2.26
PICH Mode
Presence
Range
Semantics description
Number of PI per frame
9.2.2.27
Presence
Range
Semantics description
9.2.2.29
Power Offset
This IE defines a power offset relative to the Downlink transmission power of a DPCH or a Secondary CCPCH.
IE/Group Name
Power Offset
Presence
Range
Semantics description
Step 0.25 dB, range 0-6 dB
9.2.2.29
IE/Group Name
Power_Raise_Limit
Power_Raise_Limit
Presence
Range
Semantics description
0-10 dB, step size 1 dB
9.2.2.31
IE/Group Name
Preamble Signatures
Preamble Signature
Presence
Range
Semantics description
Each bit indicates
availability for a signature,
where the signatures are
numbered signature 0 up
to signature 15. The value
1 of a bit indicates that the
corresponding signature is
available and the value 0
that it is not available.The
order of bits is to be
interpreted according to
subclause 9.3.4. See also
[9].
9.2.2.32
Preamble Threshold
The IE sets the threshold for preamble detection. The ratio between received preamble power during the preamble period and interference le
Information
Element/Group Name
Preamble Threshold
Presence
Range
the preamble period and interference level shall be above this threshold in order to be acknowledged.
Semantics description
0: - 36.0 dB
1: - 35.5 dB
2: - 35.0 dB
..
72: 0.0 dB
9.2.2.33
Primary CPICH power is the power that shall be used for transmitting the P-CPICH in a cell. The reference point is the antenna connector.
IE/Group Name
Primary CPICH power
Presence
Range
9.2.2.34
Presence
Range
Semantics description
9.2.2.35
Propagation Delay
Propagation delay is the one-way propagation delay of the radio signal from the MS to the Node B.
IE/Group Name
Propagation Delay
Presence
Range
Semantics description
Chips. Step size is 3 chips.
0=0 chips,
1=3 chips,
9.2.2.37
IE/Group Name
RACH Slot Format
Range
Semantics description
See ref. [7].
9.2.2.38
IE/Group Name
RACH Sub Channel
Numbers
Range
Semantics description
Each bit indicates
availability for a
subchannel, where the
subchannels are numbered
subchannel 0 to
subchannel 11. The value
1 of a bit indicates that the
corresponding subchannel
is available and the value 0
indicates that it is not
available.The order of bits
is to be interpreted
according to subclause
9.3.4.
9.2.2.39
RL Set ID
The RL Set ID uniquely identifies one RL Set within a Node B Communication Context.
IE/Group Name
RL Set ID
Presence
Range
Semantics description
9.2.2.39A
The Received total wide band power indicates the UL interference at a certain cell under CRNC, see ref. [4].
IE/Group Name
Received total wide band
power
Presence
Range
Semantics description
According to mapping in
[22].
9.2.2.40
S-Field Length
The UE uses the S Field of the UL DPCCH slot to send the SSDT Cell ID to the network.
IE/Group Name
S Field Length
Presence
Range
Semantics description
9.2.2.42
IE/Group Name
Scrambling Code Word
Number
Range
Semantics description
Identification of scrambling
code see ref. [9].
9.2.2.43
IE/Group Name
Secondary CCPCH Slot
Format
Range
Semantics description
9.2.2.44
Presence
Range
Semantics description
9.2.2.45
The SSDT Cell ID Length parameter shows the length of the SSDT Cell ID.
IE/Group Name
Cell ID Length
Presence
Range
Semantics description
9.2.2.46
Presence
Range
Semantics description
9.2.2.47
SSDT Indication
Presence
Range
Semantics description
9.2.2.48
STTD Indicator
Presence
Range
Semantics description
9.2.2.49
T Cell
Timing delay used for defining start of SCH, CPICH and the DL scrambling code(s) in a cell relative BFN. Resolution 256 chips.
IE/Group Name
T Cell
Presence
Range
9.2.2.49A
The TFCI2 Bearer Information Response IE provides information for TFCI2 bearer that have been established or modified.
IE/Group Name
Binding ID
Transport Layer Address
Presence
M
M
Range
9.2.1.4
9.2.1.63
stablished or modified.
Semantics descriptions
Criticality
-
Assigned Criticality
9.2.2.50
This parameter indicates if the normal or split mode is used for the TFCI. In the event that the split mode is to be used then the IE indic
the event that the split is 'Logical' the IE indicates the number of bits in TFCI (field 2)
IE/Group Name
TFCI signalling option
Split type
C-IfSplit
Length of TFCI2
C-SplitType
Integer (1..10)
Condition
IfSplit
SplitType
Presence
Range
Explanation
The IE shall be present if the TFCI signalling option IE is set to Split.
The IE shall be present if the Split type IE is set to Logical.
at the split mode is to be used then the IE indicates whether the split is 'Hard' or 'Logical', and in
E indicates the number of bits in TFCI (field 2).
Semantics description
'Normal' : meaning no split in the TFCI field (either 'Logical' or 'Hard')
'Split' : meaning there is a split in the TFCI field (either 'Logical' or 'Hard')
'Hard' : meaning that TFCI (field 1) and TFCI (field 2) are each 5 bits long and each
field is block coded separately.
'Logical' : meaning that on the physical layer TFCI (field 1) and TFCI (field 2) are
concatenated, field 1 taking the most significant bits and field 2 taking the least
significant bits). The whole is then encoded with a single block code.
9.2.2.53
The Transmit Diversity Indicator indicates whether transmit diversity shall be active or not.
IE/Group Name
Transmit Diversity Indicator
Presence
Range
Semantics description
9.2.2.53A
Defines the parameters for the compressed mode gap pattern sequence. For details see ref. [18].
IE/Group Name
Transmission gap pattern
Sequence Information
Presence
Range
1 to <MaxTGPS>
>TGPSI Identifier
Integer(1..<MaxTGPS>)
>TGSN
Integer (0..14)
>TGL1
Integer(1..14)
>TGL2
Integer (1..14)
>TGD
>TGPL1
>TGPL2
>UL/DL mode
M
O
M
>Downlink compressed
mode method
C-DL
Integer
(0, 15.. 269)
Integer (1..144,)
Integer (1..144,)
Enumerated (UL only,
DL only, UL/DL)
Enumerated (puncturing,
SF/2, higher layer
scheduling,)
Enumerated (SF/2, higher
layer scheduling,)
M
M
>DeltaSIRafter1
Integer
(0..30)
>DeltaSIR2
Integer
(0..30)
>DeltaSIRafter2
Integer
(0..30)
Condition
UL
Explanation
The IE shall be present if the UL/DL mode IE is set to "UL
only" or "UL/DL".
DL
Range bound
MaxTGPS
Explanation
Maximum number of transmission gap pattern sequences.
Defines if frame structure type 'A' or 'B' shall be used in downlink compressed mode.
Delta in SIR target value to be set in the Node B during the frame containing the start of the first
transmission gap in the transmission gap pattern (without including the effect of the bit-rate increase)
Step 0.1 dB, Range 0-3dB
Delta in SIR target value to be set in the Node B one frame after the frame containing the start of the first
transmission gap in the transmission gap pattern,.
Step 0.1 dB, Range 0-3dB
Delta in SIR target value to be set in the Node B during the frame containing the start of the second
transmission gap in the transmission gap pattern (without including the effect of the bit-rate increase)
When omitted, DeltaSIR2 = DeltaSIR1.
Step 0.1 dB, Range 0-3dB
Delta in SIR target value to be set in the Node B one frame after the frame containing the start of the
second transmission gap in the transmission gap pattern.
When omitted, DeltaSIRafter2 = DeltaSIRafter1.
Step 0.1 dB, Range 0-3dB
9.2.2.53
This IE indicates whether the alternative scrambling code shall used for the Downlink compressed mode method or not in the Transmis
IE/Group Name
Scrambling code change
Presence
Range
de Information
ode method or not in the Transmission Gap Pattern Sequence. For details see [18].
Semantics description
Indicates whether the
alternative scrambling code
is used for compressed
mode method 'SF/2'.
9.2.2.57
Indicates the slot format used in DPCCH in UL, accordingly to ref. [7].
IE/Group Name
UL DPCCH slot format
Presence
Range
Semantics description
9.2.2.58
UL SIR
Presence
Range
Semantics description
Step 0.1 dB
9.2.2.59
UL Scrambling Code
The UL Scrambling Code is the scrambling code used by UE. Every UE has its specific UL Scrambling Code.
IE/Group Name
UL scrambling code
number
Presence
M
Range
Semantics description
9.2.3.3
CCTrCH ID
The CCTrCH ID for dedicated and shared channels identifies unambiguously an uplink or downlink CCTrCH inside a Radio Link,
for S-CCPCH it identifies unambiguously a downlink CCTrCH within a cell.
IE/Group Name
CCTrCH ID
Presence
Range
IE type and
reference
INTEGER
(0..15)
Semantics
description