You are on page 1of 12

+1 (800) 620-8060

Error No.1: Monitor LED is Blinking


Solution: Check all the connections like Monitor Cable, Data cables, RAM,
Display Card, CPU Connections etc.

Error No.2: Continuous Three Beeps


Solution: Problem in RAM Connection.

Error No.3: Three Beeps (i.e. 1 long and 2 short)


Solution: Problem in Display Card Connection

+1 (800) 620-8060

Error No.4: Three long Beeps Period wise


Solution: Problem in BIOS or RAM

Error No.5: Continuous non-stop Beeping


Solution: Key Board Problem (i.e. some key is pressed for longer time)

Error No.6: NO display on the screen


Solution: Hard Disk cable connected wrongly.

+1 (800) 620-8060

Error No.7: Power led is off


Solution: Check main power cord; check S.M.P.S; check motherboard
connection

Error No.8: Showing CMOS Error


Solution: Replace 3 Volt Battery of motherboard; set original setting manually;
enter your search form terms, submit search form

Error No.9: Showing HDD error or Hard Disk Failure


Solution: Check power cord; Check connection of HDD; Check Data Cable;
Check Hard Disk parameters in CMOS or Auto detecting setting partitions by Fdisk command, then format it to set track 0.

+1 (800) 620-8060

Error No.10: Mother Board hangs due to un-stabilized power


supply
Solution: Check S.M.P.S; RAM not functioning properly; Software problem i.e. using
pirated software; CPU fan not functioning properly

Error No.11: Dancing Screen


Solution: Check display card connection; virus problem; video memory problem

Error No.12: Shaking Screen


Solution: Earthing problem; Magnetic waves comes around

+1 (800) 620-8060

Error No.13: CPU cabinet shock


Solution: Check Earthing; Check main power cord

Error No.14: Hard Disk making noise while processing


Solution: Un-stabilized power supply; check for loose contact; do not use Y
connectors for Hard Disk because it may create bad sector or weak Hard Disk.

Error No.15: Hard Disk hangs while processing


Solution: Check for bad sectors by using CHDISK or SCANDISK command. If found
format the hard disk and set partition before that area. (Note: This is the only
procedure to use hard disk with bad sector or to avoid bad sectors use standard
power supply)

+1 (800) 620-8060

Error No.16: Hard Disk not detected


Solution: Check power connector; check Data cables; check jumpers

Error No.17: Partition not shown


Solution: Operating System where the Hard Disk formatted is not supported
with present Mother Board

Error No.18: Windows Registry error


Solution: This will happen due to sudden ON/OFF of the system. Final
solution is to Reinstall OS.

+1 (800) 620-8060

Error No.19: Display color doesnt match


Solution: Configure Display Card properly or reset the setting

Error No.20: Unknown Device found


Solution: Driver Utility may not be provided with OS. For this install driver
for the device.

+1 (800) 620-8060

https://www.facebook.com/HPTechSupportPhoneNumber

https://twitter.com/TechSupportHP

https://www.linkedin.com/company/hp-technical-suppor
t-phone-number

+1 (800) 620-8060

https://www.flickr.com/people/hptechnicalsupportphonenumber/

http://www.slideshare.net/HPTechnicalSupportNumbers

https://www.pinterest.com/HPTechSupport/

+1 (800) 620-8060

Company Name: HP Technical Support Phone Number +1-800-620-8060


Address: 16321 N. 7th Street
Suite B8
Phoenix, Arizona 85022
United States

Email: support@hptechsupportnumbers.com
Website: http://www.hptechsupportnumbers.com/
Toll-Free Number: 1-800-620-8060
Working Hours: 24*7

+1 (800) 620-8060

You might also like