Professional Documents
Culture Documents
www.cembrit.cz
wishes and demands. This means that you need not spend time
and money on painting your faade for many years to come.
10-Year Warranty
HardiePlank siding is covered by a 10-year warranty which
guarantees that, unlike traditional products, it will stay looking
good year after year.
HardieTrim Profiles
As a result, you achieve beautiful and practical solutions that last year after year with a
minimum of maintenance.
Light Mist
JH70-10
Sail Cloth
JH20-10
Arctic White
JH10-20
Timber Bark
JH40-30
Cobble Stone
JH40-10
Soft Green
JH60-10
Iron Grey
Midnight Black
JH90-40
Traditional Red
JH90-10
Parkside Pine
JH 60-30
Khaki Brown
JH20-30
Boothbay Blue
JH70-20
Rustic Brown
JH80-40
Chestnut Brown
Mountain Sage
JH50-30
Evening Blue
JH70-30
Ocean Blue
JH70-40
JH80-30
JH90-30
The above printed colours may differ from the actual product colours.
Beautiful Colours
HardieBlade
Saw blade specially developed to produce only a very low amount of dust.
Diamond tipped edges make sure the
blade has a much longer life time than
the usual blades. Available in 160 /
190 / 254 / 305 mm diameter.
Tape
Tape underlay to be installed behind
joints. Available in rolls of 20 m.
Touch-up Paint
Touch-up paint for covering cut edges and small scratches. Matches all
the colours of HardiePlank siding.
Can of 1 litre.
MetalTrim Profiles
A range of aluminium profiles for interior and exterior corners. The profiles can also be used for combining
HardiePlank with other materials.
Colours: Arctic White, Sail Cloth and
Midnight Black.
April 2009
HardiePlank Siding
HardiePlank siding comes in the following dimensions:
width 180 mm, length 3600 mm, thickness 8 mm. Installed as
lapped siding with 30 mm overlap, giving a 150 mm visible width
per siding.
HardiePlank siding has a texture like roughly sawed cedar
wood with a natural grain.
The patented fibre-cement mixture provides HardiePlank siding with unique qualities among others allowing it to be nailed
either using a nail gun or a hammer without any pilot drilling
leaving the siding complete and free of cracks.
HardieTrim Profiles
HardieTrim profiles come in the following dimensions:
width 90 / 140 mm, length 3050 mm, thickness 25 mm.
HardieTrim profiles are used for finishing on edges and
around doors, windows, dormers and eaves, adding a finishing
touch and ensuring correct trimming of the siding on all faces.
The surface is smooth and yet with a rustic expression.
HardieTrim profiles are cut and installed following the same
instructions as for HardiePlank siding.
HardiePlank siding and HardieTrim profiles are manufactured
by James Hardie and traded by Cembrit in [local country].
Cembrit a.s
Strong Durability
Environmentally friendly fibre-cement featuring high impact
strength and which does not crack, peel or chip.
CZ - 266 38 Beroun 3
Lidick 302
esk republika
Tel.: (+420) 311 744 111
Fax: (+420) 311 744 234
E-mail: info@cembrit.cz
Fire Protection
Does not burn and tolerates extremely high temperatures.
www.cembrit.cz
www.cembrit.cz