Professional Documents
Culture Documents
User Guide
INTRODUCTION
Common Sense Precautions
Before starting any exercise program, consult with
your physician or health professional. He or she can
help establish the exercise frequency, intensity and
time appropriate for your particular age and condition. If you have any pain or tightness in your chest,
an irregular heartbeat, shortness of breath, feel faint,
or have any discomfort while you exercise, STOP!
Consult your physician before continuing. Failure to
follow any of these safeguards may result in injury or
serious health problems.
Congratulations! Youve purchased the best fluid
trainer available, pure and simple. The CycleOps JetFluidTM Pro offers the ultimate in real-world feel for
the widest range of riders possible.
The CycleOps JetFluidTM Pro takes the legendary CycleOps Fluid technology to the next level by offering
a progressive power curve, increasing resistance as
you increase speed, just like on the road. The power
curve is paired to the CycleOps JetFluidTM Pro flywheel using PowerTuned technology, ensuring the
proper balance between resistance and momentum
to best replicate the feeling of riding outdoors. The
patented Airflow channel maintains operating temperature for a smooth ride and durable operation,
backed up by our lifetime warranty.
This user guide will take you through setting up the
CycleOps JetFluidTM Pro trainer and frame, and thoroughly explains how to use the CycleOps JetFluidTM
progressive Power curve to give you an edge over
the competition.
(C)
(B)
(A)
Assembled CycleOps JetFluidTM Pro Trainer resistance unit and frame (A)
CycleOpsSkewer (B)
Race Day training DVD (C)
Warranty registration card (Not Shown) (You may also register your CycleOps trainer at www.cycleops.
com)
If you do not find all of these items in the box, please contact Saris customer service at 800-783-7257 (option 3).
Press
Extend
Pull the yellow cam lever down and rotate 90 degrees clockwise to unlatch the resistance unit. Pivot
the resistance unit down to allow clearance for your
rear wheel.
CAUTION: In this position the resistance unit can
move freely, keep fingers clear of moving parts.
Latch the resistance unit in a down position by rotating the cam lever 90 degrees counter clockwise and
push the cam lever against the resistance unit.
The resistance unit should be tight enough to prevent the tire from slipping during accelerations.
A small indentation will be seen in the tire when
tightened properly. If slipping occurs, increase tire
compression by re-latching the resistance unit. Pull
the yellow cam lever further down while performing
the initial unlatching step.
Note: If the cam lever pops open while riding, move
the resistance unit and mount it to the front bolt
hole as shown below. Most tires will fit using either
mounting hole. Larger tires including 29 MTB tires
require mounting to the rear hole.
CycleOps JetFluid
TM
Pro
800
700
Power (watts)
600
500
JetFluid
400
300
200
100
0
0
10
15
20
Speed (mph)
25
30
35
Warranty
Procedures
All Saris Cycling Group CycleOps JetFluidTM Pro products are warranted to the retail purchaser to be free
from defects in materials and workmanship. Warranty coverage valid to the original purchaser only
and proof of purchase will be required.
Residential Environment:
Frame: Lifetime
Parts: 3 years
Labor: 1 year
This warranty excludes wear items that need to be
replaced due to normal wear and tear.