Professional Documents
Culture Documents
Guide
Price
LED light
source/
raybox**
6,500
Link
2,600
QTY
Requir
ed
Comments
10,200
Ripple tank/
strobe**
13,200
18,600
Slinky spring*
Ripple Tank
This economy Ripple Tank System comes as a ready-touse unit with no external power source required.
Comprised of a tough, moulded frame with a large
transparent viewing surface. The Ripple Tank light source
is a 6V halogen lamp which gives excellent illumination.
The tank has sloping sides which minimise noise. This
Ripple Tank System comes complete with:
Ripple tank
4 Push-fit legs
Ripple motor, eccentric cam mounted on ripple bar
3 Support pillars for supporting the light source and rippler bar
2 Motor support springs
Lamp unit with adjustable arm
2 Rippler bar hanging hooks
Power source for ripple tank
Hand stroboscope
Concave perspex plate
Rectangular perspex plate
Curved reflector
2 Barriers
Roller Bar
Neatly compartmentalized box
Radioactivity
detector set***
44,000
21,000
Microwave
transmitter and
receiver**
53,000
Spectrophotom
eter**
94,700
purpose is two fold. Firstly, the concept that visible light is small section of a
much wider band of frequencies may be introduced. Seconding microwave
radiation share so many common properties with visible light that many
experiments can be undertaken, which would otherwise be impossible due to
limitations on time or equipment costs. Set includes one transmitter and one
receiver
Spectrophotometer Kit
This new Spectrophotometer is a low-cost, modern design, small
footprint laboratory Spectrophotometer that is ideal for
applications in Physics, Chemistry and Biology.
With the power being derived from the USB connection, no
external power is required from either batteries or mains power.
The system comes as a complete, modular system which
includes: base unit, cuvette holder, a 1.2 metre fibre optic cable
accessory, USB cable and software. The unit utilises a broad spectrum high
intensity white LED light source and comes complete with carry case. Suitable
for VIS and IR spectroscopy.
Applications Include:
Analysing the visual spectrum
Beer Lambert's Law
Planck's constant - determination of wavelength
Absorbance spectrum of a liquid
White light; Forensic science.
Crystal variety
set**
Van de Graff
generator***
Specifications:
Calibrated spectrum range 400nm to 750nm
Resolution 1.5nm
Accuracy 3nm
Integration Time 9ms to 3s (adjustable)
Dynamic Range 12 bit.
Can you please send me a bit more details what this is?
23,000
16,000
Linear air
track/Air-track
glider***
27,500
Product Description:
This Edulab Mini Linear Air Track is designed to provide a cost-effective way of
studying all aspects of dynamics in a virtually friction-free environment. The
Linear Air Track is particularly effective in the observing and measuring of
collisions where conservation of momentum is dramatically demonstrated. The
Edulab Mini Linear Air Track kit contains everything required for an array of
experiments covering: velocity; force and acceleration; potential energy; kinetic
energy; conservation of energy; SHM; motion on level and inclined planes and
more. The Air Track track itself measures 1.2 metres overall and is made from
high strength 56 x 56 mm extruded aluminium. The tracks gliders are designed
to accept standard slotted masses for additional loads and is supplied with a
Dynamics
trolley set, light
gates***
18,500
Original price of
the blower is
32,000 Taka, I
have managed
to find a 2nd
hand one for
8,000 taka if
still available.
36,000
Phillip Harries, A convenient alternative to the linear air track and blower.A
sturdy and near frictionless stainless steel track that provides a compact
environment for many investigations that might be
done using a linear air track. Two heavy trolleys with
hard, free-running wheels, are included, plus a set of
100g x 10g masses and a reel of cord. The track has
solid end panels, with a rubber coating to buffer any
collisions. A cm scale is screen-printed along the length
of the track.
Each trolley has a knob for attachment of cords for
towing, and for ticker tape if that is the schools
preferred method of capturing the motion of the
trolleys. A 4mm socket on the trolleys top surface, allows for simple attachment
of interrupter cards for use with light gates (Motion QED, see page 288) or timing
software (see pages 345 to 368 for datalogging).
A free-running pulley on one end of the track, allows a mass attached to a length
of cord to be used as the accelerating force for one or two trolleys. Note that the
trolleys can be stacked to immediately provide a trolley effectively of double the
mass.
Each trolley has a spring-loaded ram that can be set and released to provide
reliable and repeatable launches. The ram can launch a trolley (single or double
mass) from one end of the track, or simulate an explosion were two trolleys fly
apart.
The "Notes For Use" includes work on acceleration, exploring F=ma,
investigations on an inclined plane, momentum and explosions.
Track:1270 (inc pulley) x 120 x 60mm Mass: 3.1kg
Trolley:155 x 76 x 55mm, Mass:0.65kg
http://www.coolbd.net/shop/engineering/dynamicssystem/
This Dynamics System is Ideal for all physics and
engineering departments where precision and value for
money will be appreciated.
Very few investments made in the physics lab will
provide more learning opportunities than the Dynamics
32,000
System.
Experiments include:
Motion; Time; Velocity; Acceleration; Friction; Newtons 2nd Law; Free fall;
Atwoods Machine; Pendulum; Forces; Impulse; Youngs Slit (single and double);
Collisions (elastic and inelastic)
Dynamics Kit includes:
1.2 metre aluminium Track; 800mm Vertical pillar and base; low friction Cart;
Interrupt card for top of cart; End reflector card; Spoked Pulley; Large and thin
brackets; Bolts, screws and wing nuts.
Inclined plane
and friction
boards*
Pulley blocks
and assembly
set**
Atomic physics
set**
Atomic physics
set**
27,700
1,09,00
0
This required
other
accessories to
work for
example stand,
power supply
etc.
If this is
something
required I can
find out more in
details.
The electron paths show up as a fine, slightly greenish beam due to impact
excitation of the helium atoms. Requires a 300 V or 500 V DC power supply.
Filament voltage: max. 7.5 V AC/DC
Anode voltage: max. 100 V DC
Anode current: max. 30 mA
Deflector voltage: max. 50 V DC
Glass bulb: 130 mm dia. approx.
Total length: 260 mm approx.
Radiation
physics
apparatus set
with common
stand**
Plancks
constant
experiment*
Telescopes with
Go to functions
(automated)**
Astronomy
study aids**
Magnetic
teaching sets**
Power source
I am trying to find the best possible price for this and will send it separately
12,000
1,800
Details
Go Green with The First Salt Water Powered Mini-Car! As the smallest, least
expensive, not to mention first fuel cell car to be powered by saltwater, the Salt
Water Fuel Cell Car gives children a chance to learn about new forms of clean
energy, while building and powering their very own toy: Just add saltwater and
go! After activating the fuel cell module with a saltwater mixture, the
magnesium metal sheet (3 sheets included) can operate the car for about 5-7
hours continuously. If you want to park the vehicle, simply take out the fuel cell
module and rinse with tap water and dry. All the materials used in this kit are
environmentally safe and clean, non-toxic substances or disposal concerns. It will
not produce heat, so it is completely safe for child's play. Vehicle measures
74.8mm x 40.2mm x 19.7mm Ages 10yrs plus.
Optics set and
interesting
toys**
Digital Audio
signal
generator**
33,000
Key features:
Ultra simplicity with only four controls.
Continuous frequency control from 0.1Hz to 100kHz. This means a full sweep
through the audio band with no decade switch to contend with.
7,000
clamping nuts.
Data logging
and sensors***
1,44,00
0
1,38,00
0
Various
http://www.ebay.co.uk/itm/COMPLETE-ACQUIRE-SCHOOL-SCIENCES-TECHNOLOGYDATA-COLLECTION-LOGGING-SYSTEM-/121681654745?
pt=LH_DefaultDomain_3&hash=item1c54cab3d9
Please check our website for various types of data logger and sensor price
http://www.coolbd.net/equipment-school-college-university/
This is old
model with
wired sensor
Latest Model
with Wireless
sensors
Pico/ DrDAQ**
High speed
camera/softwar
e**
Spring
balances,
Newton
meters( small
graduated
springs in
plastic cases)
0.1 N, 0.2N, 2.5
N, 5N**
300
Each
Or
Set of 6
for
1,600
Spring Balances
A range of colour coded tubular spring balances that can be used for both force
and mass measurements, calibrated in both newtons and grams.
250 g (2.5 N)
500 g (5 N)
1 kg (10 N
2 kg (20 N)
3 kg (30 N)
5 kg (50 N
800
Each
Or
Set of 6
for
4,200
Measuring 'g'
by freefall
apparatus.***
4,000
G Ball
The simplest way possible to measure 'g' by Free Fall!
This innovative 'baseball' allows easy measurement of the
acceleration due to gravity - at a very cost effective price.
The ball contains an integral digital timer, which can
display times between 0.01 to 29.99 seconds. Simply hold
down the button to zero the display then release the ball
from your hand at a known height above the ground.
Timing starts when the ball is released and stops when it
hits the floor. Although the mechanism is well protected it is advisable to drop
the ball onto a soft surface, such as a grassed area or carpeted floor. Maximum
vertical drop is about 12 metres, depending on the landing surface.
The 'g' ball timer is powered by 2 x SR54 button cells, which are replaceable.
Comes complete with batteries. Dimensions (Dia.): 100mm.
Examples of experiments using the 'g'-ball:
1. Determine the acceleration due to gravity.
2. How high is this ceiling/stairway/ building
3. Release the ball from a certain height. Repeat the experiment from the same
height but now throw the ball sideways and compare the results.
38,000
18,000
G By Freefall Apparatus (Requires timer
for experiment)
This premium apparatus, from Frederiksen,
allows accurate and reproducable free fall
experiments to be carried out. The release
mechanism at the top sends a start pulse to
the timer when the ball is released, and a stop
pulse is generated when the ball hits the
contact plate at the bottom.
29,300
9,500
Features
1. High-precision LED digital display, intuitive and clear.
2. 8 cm smart fan, temperature> 45 degrees start cooling, excellent heat
dissipation, effectively extend fan life and reduce noise.
3. Compact and lightweight, exquisite, easy to carry and dont take up the work
environment.
4. A variety of protection, current limiting protection (OCP), over temperature
protection (OTP), Over Power Protection (OPP).
5. Plastic panels are more beautiful, the coarse and fine adjustment knob of
voltage and current make the settings to be more
precise.
6. Single Output, 30V 5A at full power for a long time to work.
Specifications
Line Voltage
200-240VAC, 50Hz-60Hz
Input Current(at 220VAC, full load)
0.9A
Output Voltage Range 0-30V
Output Current Range 0-5A
Voltage Display Accuracy 0.5%
Current Display Accuracy 0.5%
Efficiency >85%
Voltage Regulation Load Regulation (10-100%) 50mV
Line Regulation (200-240VAC) 20mV
Ripple& Noise (P-P) 50mV
Current Regulation Load Regulation (10-100%) 20mA
Ripple& Noise (P-P) 20mA
7(W) X 16(H) X 22(D)cm
Chemistry
Item
Laboratory
safety videos for
lab
technicians***
Chemistry
related videos
(digital higher
resolution)***
Material kits
(solids)**
Guide
Price
Details / Link
QTY
Requir
ed
Comments
21,00
0
1,900
650
900
950
1,500
conducting. It is not adhesive. Film is sold by the metre. Dimensions (W x L): 380
mm x 1 metre.
Thermochromic Sheet (Sample Pack)
A remarkable self adhesive sheet material
printed with thermochromic liquid crystal
'ink'. Changes colour (bright blue) when
heated above 27C. Potential applications are
many and varied. e.g, temperature
indication/warnings, body jewellery,
advertising displays (attach a resistance wire
to the rear and pass a small current to cause
dramatic colour changes to the front 'screen'.
Note: Typical applications require only very
small pieces - e.g. 25 x 25mm.
Note: Sample Pack contains a piece of thermocolour sheet (50 x 150mm) and a
metre of resistance wire and an information pamphlet that describes how to
make a simple 'LCD'.
Memory Wire / Smart alloy
Memory wire is a nickel/titanium alloy (NiTi) and
'remembers' its original shape when dropped into
hot water (90C). The wire also 'remembers'
different shapes by holding in the desired shape
and heating to 500C for a few minutes. Supplied
by the metre. Dimensions (Dia. x L): 0.78mm x 1
metre.
Rock and
mineral
samples***
4,800
Rock Samples:
Sandy Soil
Granite
Basalt
Gabbro
Slate
Limestone
Clay Soil
Gneiss
Chalk
Sandstone
Marble
1,200
1,800
6,500
Rock Cycle Pack
An
5x Basalt
educational pack of 12
different rock specimens, a
minimum of 5 pieces of each,
making 60+ samples
altogether. 5x Quartzite
5x Gabbro
5x Marble
5x Oolitic Limetone
5x Granite
5x Conglomerate
5x Andesite
5x Sandstone
5x Clay
5x Slate
5x Gneiss
5,500
300
taka
each
Various minarels
Please check attacehd document for various minerals available.
Colorimeter***
76,00
0
21,00
0
A robust, easy to use colorimeter making colourwave ideal for beginners, with 8
filters covering the range 440 to 700nm which are held in the integral filter
wheel. Readings can be displayed as absorbance units or % transmission with
one button push. When switched to kinetic mode
readings are continuously displayed and can be output
via the analogue and digital ports. Accepts both 10 x
10 mm cuvettes or 16mm diameter tubes. Dimensions
(L x W x D): 180 x 150 x 60 mm.
Range: -0.3A to 1.99V for 0 to 199%T
Wavelength: 400 to 700nm
Bandwidth: 40nm
Output: 0 to 2V for 0 to 2A, 0 to 1.99V for 0 to
199%T, RS232
booklets/guideli
nes/
documentaries*
**
pH meter (with
datalogging) **
For this, you will need to buy a PH probe for the data logging kit, So it will
depend on which data logging kit is purchased.
Standalone PH meters dont have data logging usually.
Biology Items
Biology
videos***
Guide
Price
Details / Link
QTY
Requir
ed
Comments
Anatomy of
human body CD
/ 3D
graphics***
31,00
0
Anatomy Model
Human Body
The Unisex Torso Anatomical Model is a model designed as a visual aid for
teaching physiology and hygiene courses. The Unisex Torso Anatomical Model
helps students understand the anatomical structure of the head, neck and
internal organs of the human body. The Unisex Torso Anatomical Model shows the
relative position, the morphological characters and anatomical structures of the
head , neck and internal organs with special reference to respiratory, digestive,
urinary and nervous systems.
The Unisex Torso Anatomical Model is made of PVC plastic and wipes clean.
The Unisex Torso is mounted on a plastic base.
Parts of the Unisex Torso Anatomical Model
The Unisex Torso Anatomical Model includes 40 parts:
Torso Female breast plate Head Eyeball Brain (in 8 parts) Vertebra Spinal
nerves (in 4 parts)
Lung (in 4 parts) Heart (in 2 parts) Trachea Oesophagus and descending
aorta
Diaphragm Liver Kidney Stomach (in 2 parts) Intestines (in 4 parts)
9,600
Electrophoresis
set*
900
The original
DNA kit will
require a tank
and high
voltage
generator, if
that is required
I can find out
about that as
well.
laid over this and the ends passed down through the slots. Self adhesive
conductive tape strips at each end of the bridge provide the means of
connecting
to a lowvoltage supply e.g., two or three 9V PP3 batteries in series
The kit includes:
2 x 60ml buffer containers
1 x slotted acrylic bridging piece
1 x rectangle of chromatography card
1 x length of conductive tape
2 x crocodile clip leads
Cell models**
31,50
0
16,60
0
For 1
anima
l or
Plant
cell
5,000
Mitosis/meiosis
model sets**
20,00
0
13,80
0
screen, the details of the specimen required for demonstration at the most
suitable magnification. The student
subsequently finds it easier to locate the relevant part of the microscopic slide
under the microscope. The
transparencies are printed by a special process and excel by reason of their high
projection quality.
3. Set of sketch- and worksheets with drawings for all slides. The Sketch- and
Work Sheets serve to facilitate
seeing his way through the prepared microscope slides and finding the detail
important in the lesson. They start
processes of learning and understanding by comparing microscope slides with
the diagrammatic drawings, thus
to identify and label the details relevant in the lesson. They allow completing or
colouring the drawings according
to own observations, and finally the sheets can be used for tests. Teacher may
take photocopies of the sheets for
the number of students.
4. Textbook with detailed description of all slides, drawings and transparencies.
The Textbooks are intended to
help you make more effective use of our teaching material both in the classroom
and during individual study.
They provide a description of the morphological structures involved, making it
considerably easier to look for and
find the relevant spots in the microscope slides. They also furnish information
regarding systematic and
physiological relationships and general biological principles, as well as
stimulating classroom interpretation and
didactic use of the observations made.
5. Special cardboard box for storing and packing
Prepared slides
of above
stages**
3D models**
3D charts / 2D
raised charts**
Charts of
organs, body
systems,
processes such
as water cycle,
environment**
Clinostat**
Variab
le
Fossil sets**
2,100
16,70
0
Clinostat
For demonstration of heliotropism and geotropism.
Germinating seedlings are pinned to the cork table
which is rotated by an electric motor at 4
revolutions per hour. The motor is spindle mounted
and may be clamped so that the place of the table
can be set at any angle between horizontal and
vertical. An acrylic cover is provided for the cork
table to shield the seedlings from droughts.
Diameter of cork disc100 mm
Fossil Set 12 Items (Ammonite, Trilobite, Coral,
Crinoid, Brachiopod, Gastropod, Stomatalite,
Gonatite, Fish Vertebra, Dinosaur Eggshell, Shark
Tooth, Echinoid)
Genetics set**
Rat/birds, etc
Dissection
models**
Microscope
4,900
optical guide
for camera
feed**
Ecology sets
and test kits*
Ecology
fieldwork sets
and charts*
General Items
Laboratory Tap
Guide Price
Details / Link
Comments