Professional Documents
Culture Documents
LASTOBLOCK
0672-BPR-001
EN 1337-3
1337-5
EN
Characteristics
The mageba LASTOBLOCK elastomeric bearing is a reinforced
elastomeric bearing manufactured from synthetic chloroprene
rubber (CR) or natural rubber (NR).
By using well proven production processes and only highquality raw materials, we can guarantee a long life-span without
the need for maintenance.
Main features
Fields of application
www.mageba.ch
Functioning principles
LASTOBLOCK elastomeric bearing
LASTOBLOCK
The mageba
functions primarily as an elastic, load
transmitting link between construction elements which need to be connected
in such a way as to allow a degree of movement. Vertical loads from the
structure itself and traffic loads are transmitted without constraint into the
bearing seat. Acceleration and deceleration forces from traffic load, wind
forces and centrifugal forces are also efficiently absorbed by the bearings, as
well as forces arising from skewed movements of adjacent structural
elements.
The materials used and the structural composition of the bearings mean that
they are able to accommodate movements resulting from temperature
differences between construction elements. Rotational forces from the skewed
arrangement of structural components are absorbed by elastic deformation
around two horizontal axes.
Quality
Type B
Type B elastomeric bearings are enclosed on all sides with rubber (NR/CR)
and are used between concrete or steel construction components. This type
of bearing can simply be positioned between the structural components.
Type C
If the minimum vertical loads indicated in the following tables (see pages 6-21)
are not achieved, the elastomeric pad must be anchored to prevent
displacement. This anchoring can be achieved by means of shear lugs or
bolts, both of which can be fastened to the steel exterior of the elastomeric
bearing.
Type B / C
This type of bearing is a combination of bearing types B and C, whereby one
side of the pressure pad resembles Type B, and the other Type C. This
bearing can, for example, be protected against shifting using either shear lugs
or anchoring on the top or bottom surface of the bearing; the opposite side
remains unanchored.
Type C-RB
Elastomeric bearings of Type C-RB have an identical composition to Type C
bearings, but the exterior flat steel sheets on the top and bottom surfaces of
the bearing are replaced by chequered plates (steel quality S235). These
chequered plates, with a thickness of 10 or 18mm, are vulcanised onto both
sides and provide extra protection against shifting.
4 Permissible loads
Determining bearing height
Owing to their design, LASTOBLOCK elastomeric bearings can always be moved and tilted on all sides. Briefly applied
horizontal forces can be absorbed by shear deformation.
The resulting restoring forces are used to resist these horizontal loads, provided that the resulting displacements are
permissible. Exclusive use of bearings of this kind results in a floating support of the structure.
Choice of bearing
mageba LASTOBLOCK elastomeric bearings permit the simultaneous
support of the following loads:
- Standard absorption of vertical loads
- Absorption of briefly applied external horizontal forces
- Horizontal movement in all directions through shear deformation
- Rotation of the bearing surfaces around all axes
In order to determine the bearing dimensions, the following parameters must
be known:
- Vertical loads:
Ndmax and Ndmin
- Displacements:
vxyd
- Rotation of bearing:
ab
- Bearing shape (round or right-angled)
- Contact surfaces (steel or concrete)
- Maximum dimensions (if space for the bearing is limited)
Principles of evaluation
According to EN1337, the following verifications must be performed for all
bearings:
- Maximum deformation (deformation from vertical load, shear deformation
from horizontal displacement and deformation from torsion)
- Thickness of internal and external reinforcement sheets
- Rotation limiting conditions
- Stability in terms of sliding
The load-bearing capacity of a bearing will vary, depending on other factors
such as deformation arising. Therefore the adequacy of a bearing must be
verified on a case by case basis, with consideration of the various relevant
factors.
A bearing of any size can be subjected to various load / deformation conditions; as vertical load on the bearing increases, the allowable horizontal
deformation (displacement) decreases. Each bearing size is capable of
allowing a certain maximum horizontal deformation, Vxy,max which is only
allowed when the vertical load is sufficiently low. If a lower horizontal
deformation, Vxyd is to be permitted (so that Vxyd < Vxy,max), then the
permissible vertical load increases. To standardise bearing production and
selection, mageba has defined three conditions as follows:
- Condition 1: Vxyd = 25% of Vxy,max
- Condition 2: Vxyd = 50% of Vxy,max
- Condition 3: Vxyd = 100% of Vxy,max
Each bearing size can support varying vertical loads, depending on which
condition is considered. Therefore a bearing size should be selected for each
of the three conditions, and the one with the smallest volume would normally
be selected, as the most economical.
Ndmin
(concrete/ steel)
vxyd
[kN]
172
[kN]
(51 / 51)
391
(79 / 79)
5.8
1'720
(326 / 326)
15.4
ab
[mm] [%]
4.2 2.0
Ndmin
(concrete/steel)
vxyd
ab
Nd
Ndmin
(concrete/steel)
vxyd
ab
Bearing dimensions/Parameters
a
Weight
Te
Kz
Kxy
[kN]
159
[kN]
(47 / 47)
[mm]
10.5
[%]
1.7
[kN]
139
[kN]
(45 / 90)
[mm]
21.0
[kg]
1.8
[mm]
21
1.8
366
(74 / 74)
14.5
1.6
325
(68 / 135)
29.0
1.0
150 200 41
3.8
29
104.0
0.93
3.0
1'576
(299 / 299)
38.5
2.7
1'337
(270 / 540)
77.0
2.3
37.8
77
293.2
1.40
[kN/mm] [kN/mm]
55.3
0.86
1) Calculation of the necessary bearing dimensions using load condition 1: vxyd = 25% vxy,max
=> Bearing dimensions: 300x400x105mm
(vxyd = 15.4mm > 13.5mm, Nd = 1720kN > 114kN, ab = 3.0% > 1.0%)
Note: Ndmin (allowable) = 326 kN > Ndmin (actual)
(Because the min. load has not been met, this bearing type requires additional anchoring to prevent
shifting e.g. shear edges. An alternative is to use an elastomeric bearing of Type C with shear lugs or
bolt fastenings.)
2) Calculation of the necessary bearing dimensions using load condition 2: vxyd = 50% vxy,max
=> Bearing dimensions: 150x200x41mm
(vxyd = 14.5mm > 13.5mm, Nd = 366 kN > 114kN, ab = 1.6% > 1.0%)
Note: Ndmin (allowable) = 74kN = Ndmin (actual)
3) Calculation of the necessary bearing dimensions using load condition 3: vxyd = 100% vxy,max
=> Bearing dimensions: 100x200x30mm
(vxyd = 21.0mm > 13.5mm, Nd = 139kN > 114kN, ab = 1.3% > 1.0%)
Note: Ndmin (allowable) = 45kN < Ndmin (actual)
=> Result: the bearing with the dimensions 100x200x30 [mm] is the most economical solution for
the reported loads.
Note: Please note that the following tables should only be used to calculate approximate bearing dimensions. More precise dimensions and/or
optimised sizes can be requested from mageba directly.
Meaning of symbols
a
Te
Kz
Kxy
Nd
Ndmin (concrete) : required min. vertical forces with concrete connection (design level)
Ndmin (steel)
vxyd
vxy,max
ab
Type B elastomeric bearings are enclosed on all sides with rubber (NR/CR)
and are used between concrete or steel construction components. This type
of bearing can simply be positioned between the structural components.
Ndmin
(Concrete/Steel)
[kN]
(38 / 38)
(37 / 37)
(51 / 51)
(50 / 50)
(80 / 80)
(79 / 79)
(78 / 78)
(101 / 101)
(99 / 99)
(98 / 98)
(121 / 121)
(120 / 120)
(118 / 118)
(136 / 136)
(135 / 135)
(133 / 133)
(132 / 132)
(164 / 164)
(162 / 162)
(161 / 161)
(159 / 159)
(192 / 192)
(190 / 190)
(188 / 188)
(187 / 187)
(219 / 219)
(218 / 218)
(216 / 216)
(214 / 214)
(207 / 207)
(206 / 206)
(205 / 205)
(203 / 203)
(202 / 202)
(278 / 278)
(276 / 276)
(275 / 275)
(273 / 273)
(271 / 271)
(334 / 334)
(331 / 331)
(329 / 329)
(326 / 326)
(419 / 419)
(416 / 416)
(412 / 412)
(409 / 409)
(505 / 505)
(500 / 500)
(496 / 496)
(492 / 492)
(443 / 443)
(440 / 440)
(437 / 437)
(434 / 434)
(430 / 430)
(563 / 563)
(560 / 560)
(556 / 556)
(553 / 553)
(549 / 549)
vxyd ab
[mm]
4.2
5.8
4.2
5.8
4.2
5.8
7.4
4.2
5.8
7.4
4.2
5.8
7.4
5.8
7.4
9.0
10.6
5.8
7.4
9.0
10.6
5.8
7.4
9.0
10.6
5.8
7.4
9.0
10.6
5.8
7.4
9.0
10.6
12.2
5.8
7.4
9.0
10.6
12.2
8.2
10.6
13.0
15.4
8.2
10.6
13.0
15.4
8.2
10.6
13.0
15.4
8.2
10.6
13.0
15.4
17.8
10.6
13.0
15.4
17.8
20.2
[%]
3.1
6.1
2.0
4.4
0.0
1.8
3.8
0.0
1.3
2.7
0.0
1.0
2.0
0.0
1.1
2.4
3.5
0.0
0.8
1.8
2.8
0.0
0.7
1.4
2.3
0.0
0.6
1.1
1.7
0.0
0.0
0.8
1.7
2.4
0.1
0.1
0.6
1.1
1.7
0.0
0.8
1.8
3.0
0.0
0.6
1.4
2.1
0.1
0.4
1.0
1.6
0.1
0.3
1.0
1.8
2.7
0.4
0.6
1.0
1.7
2.4
Ndmin
(Concrete/Steel)
[kN]
(35 / 35)
(34 / 34)
(47 / 47)
(45 / 45)
(76 / 76)
(74 / 74)
(72 / 72)
(96 / 96)
(93 / 93)
(90 / 90)
(116 / 116)
(112 / 112)
(109 / 109)
(129 / 129)
(126 / 126)
(124 / 124)
(121 / 121)
(156 / 156)
(152 / 152)
(149 / 149)
(145 / 145)
(183 / 183)
(179 / 179)
(174 / 174)
(170 / 170)
(209 / 209)
(205 / 205)
(200 / 200)
(195 / 195)
(200 / 200)
(196 / 196)
(193 / 193)
(189 / 189)
(186 / 186)
(268 / 268)
(263 / 263)
(259 / 259)
(254 / 254)
(249 / 249)
(320 / 320)
(313 / 313)
(306 / 306)
(299 / 299)
(401 / 401)
(392 / 392)
(384 / 384)
(375 / 375)
(483 / 483)
(472 / 472)
(461 / 461)
(451 / 451)
(427 / 427)
(419 / 419)
(411 / 411)
(403 / 403)
(395 / 395)
(540 / 540)
(531 / 531)
(522 / 522)
(513 / 513)
(505 / 505)
vxyd
ab
[mm] [%]
10.5 2.7
14.5 5.4
10.5 1.7
14.5 4.0
10.5 0.0
14.5 1.6
18.5 3.4
10.5 0.0
14.5 1.0
18.5 2.4
10.5 0.0
14.5 0.7
18.5 1.8
14.5 0.0
18.5 1.0
22.5 2.1
26.5 3.3
14.5 0.0
18.5 0.7
22.5 1.6
26.5 2.5
14.5 0.0
18.5 0.6
22.5 1.3
26.5 2.0
14.5 0.0
18.5 0.4
22.5 1.0
26.5 1.6
14.5 0.0
18.5 0.0
22.5 0.7
26.5 1.4
30.5 2.1
14.5 0.0
18.5 0.1
22.5 0.4
26.5 1.0
30.5 1.4
20.5 0.0
26.5 0.6
32.5 1.7
38.5 2.7
20.5 0.0
26.5 0.4
32.5 1.1
38.5 2.0
20.5 0.0
26.5 0.3
32.5 0.8
38.5 1.4
20.5 0.0
26.5 0.0
32.5 0.7
38.5 1.6
44.5 2.4
26.5 0.3
32.5 0.4
38.5 0.8
44.5 1.4
50.5 2.1
Ndmin
v
(Concrete/Steel) xyd
[kN]
[mm]
(34 / 68)
21.0
(34 / 68)
29.0
(45 / 90)
21.0
(45 / 90)
29.0
(70 / 135)
21.0
(68 / 135)
29.0
(68 / 135)
37.0
(88 / 169)
21.0
(85 / 169)
29.0
(85 / 169)
37.0
(106 / 203)
21.0
(102 / 203)
29.0
(102 / 203)
37.0
(119 / 225)
29.0
(113 / 225)
37.0
(113 / 225)
45.0
(113 / 225)
53.0
(143 / 270)
29.0
(136 / 270)
37.0
(135 / 270)
45.0
(135 / 270)
53.0
(168 / 315)
29.0
(160 / 315)
37.0
(158 / 315)
45.0
(158 / 315)
53.0
(192 / 360)
29.0
(183 / 360)
37.0
(180 / 360)
45.0
(180 / 360)
53.0
(187 / 338)
29.0
(180 / 338)
37.0
(173 / 338)
45.0
(169 / 338)
53.0
(169 / 338)
61.0
(251 / 450)
29.0
(242 / 450)
37.0
(232 / 450)
45.0
(225 / 450)
53.0
(225 / 450)
61.0
(296 / 540)
41.0
(282 / 540)
53.0
(270 / 540)
65.0
(270 / 540)
77.0
(371 / 675)
41.0
(353 / 675)
53.0
(338 / 675)
65.0
(338 / 675)
77.0
(446 / 810)
41.0
(425 / 810)
53.0
(405 / 810)
65.0
(405 / 810)
77.0
(400 / 709)
41.0
(384 / 709)
53.0
(368 / 709)
65.0
(355 / 709)
77.0
(355 / 709)
89.0
(501 / 900)
53.0
(483 / 900)
65.0
(465 / 900)
77.0
(450 / 900)
89.0
(450 / 900)
101.0
ab
Bearing dimensions/Parameters
a
Te
Weight
[kg]
1.4
1.8
1.8
2.5
2.8
3.8
4.8
3.5
4.8
6.0
4.2
5.7
7.2
6.4
8.0
9.7
11.3
7.7
9.7
11.7
13.6
9.0
11.3
13.6
16.0
10.3
13.0
15.6
18.3
9.7
12.2
14.6
17.1
19.6
12.9
16.3
19.6
22.9
26.3
21.1
26.7
32.3
37.8
26.5
33.5
40.4
47.4
31.8
40.2
48.6
57.0
27.8
35.2
42.5
49.8
57.2
44.8
54.1
63.5
72.8
82.1
Kz
Kxy
[kN/mm] [kN/mm]
33.2
0.64
24.0
0.47
55.3
0.86
40.1
0.62
143.7
1.29
104.0
0.93
81.5
0.73
215.2
1.61
155.8
1.16
122.2
0.91
293.3
1.93
212.4
1.40
166.5
1.09
293.3
1.55
229.9
1.22
189.0
1.00
160.5
0.85
407.9
1.86
319.7
1.46
262.9
1.20
223.2
1.02
531.2
2.17
416.4
1.70
342.4
1.40
290.7
1.19
661.2
2.48
518.2
1.95
426.1
1.60
361.8
1.36
650.0
2.33
509.5
1.82
418.9
1.50
355.7
1.27
309.0
1.11
1'075.7
3.10
843.1
2.43
693.2
2.00
588.6
1.70
511.4
1.48
550.6
2.63
425.9
2.04
347.3
1.66
293.2
1.40
812.6
3.29
628.6
2.55
512.6
2.08
432.7
1.75
1'095.9
3.95
847.7
3.06
691.2
2.49
583.5
2.10
935.0
3.46
723.3
2.67
589.8
2.18
497.9
1.84
430.8
1.59
1'141.0
3.40
930.4
2.77
785.4
2.34
679.5
2.02
598.8
1.78
Type B elastomeric bearings are enclosed on all sides with rubber (NR/CR)
and are used between concrete or steel construction components. This type
of bearing can simply be positioned between the structural components.
Ndmin
v
(Concrete/Steel) xyd ab
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
[kN]
[mm] [%] [kN]
(678 / 678)
10.6 0.4 6'519
(674 / 674)
13.0 0.6 6'412
(669 / 669)
15.4 0.7 6'281
(665 / 665)
17.8 1.3 5'342
(661 / 661)
20.2 1.8 4'626
(767 / 767)
10.6 0.6 7'410
(762 / 762)
13.0 0.7 7'303
(758 / 758)
15.4 0.8 7'196
(754 / 754)
17.8 1.0 7'089
(750 / 750)
20.2 1.4 6'416
(745 / 745)
22.6 1.8 5'647
(855 / 855)
10.6 0.6 8'302
(851 / 851)
13.0 0.7 8'195
(847 / 847)
15.4 0.8 8'088
(843 / 843)
17.8 1.0 7'981
(838 / 838)
20.2 1.3 7'874
(834 / 834)
22.6 1.4 7'540
(830 / 830)
25.0 1.8 6'722
(1027 / 1027) 13.8 0.7 9'322
(1022 / 1022) 17.0 0.8 9'188
(1016 / 1016) 20.2 1.0 9'054
(1010 / 1010) 23.4 1.1 8'869
(1005 / 1005) 26.6 1.8 7'685
(999 / 999)
29.8 2.5 6'755
(1201 / 1201) 13.8 0.7 10'896
(1194 / 1194) 17.0 0.8 10'740
(1188 / 1188) 20.2 1.0 10'583
(1181 / 1181) 23.4 1.1 10'427
(1174 / 1174) 26.6 1.6 9'683
(1168 / 1168) 29.8 2.1 8'511
(1408 / 1408) 13.8 0.7 12'851
(1402 / 1402) 17.0 0.8 12'694
(1395 / 1395) 20.2 1.0 12'538
(1389 / 1389) 23.4 1.3 12'382
(1382 / 1382) 26.6 1.4 12'225
(1375 / 1375) 29.8 1.6 12'069
(1369 / 1369) 33.0 1.8 11'475
(1612 / 1612) 13.8 0.7 14'708
(1604 / 1604) 17.0 0.8 14'529
(1597 / 1597) 20.2 1.0 14'350
(1589 / 1589) 23.4 1.1 14'171
(1581 / 1581) 26.6 1.4 13'992
(1574 / 1574) 29.8 1.6 13'813
(1566 / 1566) 33.0 1.7 13'634
(1842 / 1842) 17.0 1.0 13'413
(1832 / 1832) 21.0 1.3 13'234
(1823 / 1823) 25.0 1.6 13'055
(1813 / 1813) 29.0 1.8 12'876
(1804 / 1804) 33.0 2.1 12'697
(1794 / 1794) 37.0 2.4 12'518
(1785 / 1785) 41.0 2.7 12'339
(2342 / 2342) 17.0 0.8 17'122
(2331 / 2331) 21.0 1.1 16'920
(2321 / 2321) 25.0 1.4 16'719
(2310 / 2310) 29.0 1.7 16'517
(2299 / 2299) 33.0 1.8 16'316
(2288 / 2288) 37.0 2.1 16'114
(2278 / 2278) 41.0 2.3 15'912
(2267 / 2267) 45.0 2.5 15'711
ab
Nd
ab
Bearing dimensions/Parameters
a
[kN]
[mm] [%] [kN]
[kN]
[mm] [%] [mm]
(650 / 650)
26.5 0.4 6'046
(603 / 1080) 53.0 0.3 400
(639 / 639)
32.5 0.4 5'832
(581 / 1080) 65.0 0.3 400
(628 / 628)
38.5 0.6 5'597
(560 / 1080) 77.0 0.4 400
(618 / 618)
44.5 1.1 4'658
(540 / 1080) 89.0 0.8 400
(607 / 607)
50.5 1.6 3'942
(540 / 1080) 101.0 1.3 400
(738 / 738)
26.5 0.4 6'938
(691 / 1215) 53.0 0.3 450
(728 / 728)
32.5 0.6 6'724
(670 / 1215) 65.0 0.4 450
(717 / 717)
38.5 0.7 6'510
(649 / 1215) 77.0 0.4 450
(706 / 706)
44.5 0.8 6'296
(627 / 1215) 89.0 0.6 450
(696 / 696)
50.5 1.1 5'589
(608 / 1215) 101.0 0.8 450
(685 / 685)
56.5 1.7 4'819
(608 / 1215) 113.0 1.3 450
(827 / 827)
26.5 0.4 7'829
(780 / 1350) 53.0 0.3 500
(817 / 817)
32.5 0.6 7'615
(759 / 1350) 65.0 0.4 500
(806 / 806)
38.5 0.7 7'401
(738 / 1350) 77.0 0.6 500
(795 / 795)
44.5 0.8 7'187
(716 / 1350) 89.0 0.7 500
(785 / 785)
50.5 1.0 6'973
(695 / 1350) 101.0 0.7 500
(774 / 774)
56.5 1.3 6'562
(675 / 1350) 113.0 1.0 500
(763 / 763)
62.5 1.7 5'744
(675 / 1350) 125.0 1.4 500
(991 / 991)
34.5 0.6 8'745
(929 / 1620) 69.0 0.3 600
(976 / 976)
42.5 0.7 8'477
(901 / 1620) 85.0 0.4 600
(962 / 962)
50.5 0.8 8'210
(873 / 1620) 101.0 0.4 600
(948 / 948)
58.5 1.0 7'896
(844 / 1620) 117.0 0.6 600
(934 / 934)
66.5 1.6 6'712
(816 / 1620) 133.0 1.3 600
(920 / 920)
74.5 2.3 5'783
(810 / 1620) 149.0 1.8 600
(1158 / 1158) 34.5 0.6 10'222 (1086 / 1890) 69.0 0.4 600
(1141 / 1141) 42.5 0.7 9'909 (1053 / 1890) 85.0 0.4 600
(1125 / 1125) 50.5 0.8 9'596 (1020 / 1890) 101.0 0.6 600
(1108 / 1108) 58.5 1.0 9'284
(987 / 1890) 117.0 0.7 600
(1091 / 1091) 66.5 1.4 8'457
(953 / 1890) 133.0 1.0 600
(1075 / 1075) 74.5 2.0 7'286
(945 / 1890) 149.0 1.6 600
(1365 / 1365) 34.5 0.6 12'176 (1294 / 2205) 69.0 0.4 700
(1349 / 1349) 42.5 0.7 11'864 (1261 / 2205) 85.0 0.6 700
(1332 / 1332) 50.5 0.8 11'551 (1227 / 2205) 101.0 0.7 700
(1316 / 1316) 58.5 1.1 11'238 (1194 / 2205) 117.0 0.8 700
(1299 / 1299) 66.5 1.3 10'926 (1161 / 2205) 133.0 1.0 700
(1282 / 1282) 74.5 1.4 10'613 (1128 / 2205) 149.0 1.0 700
(1266 / 1266) 82.5 1.7 9'922 (1103 / 2205) 165.0 1.3 700
(1563 / 1563) 34.5 0.6 13'936 (1481 / 2520) 69.0 0.4 700
(1544 / 1544) 42.5 0.7 13'578 (1443 / 2520) 85.0 0.6 700
(1525 / 1525) 50.5 0.8 13'220 (1405 / 2520) 101.0 0.7 700
(1506 / 1506) 58.5 1.0 12'862 (1367 / 2520) 117.0 0.8 700
(1487 / 1487) 66.5 1.1 12'504 (1329 / 2520) 133.0 1.0 700
(1468 / 1468) 74.5 1.4 12'147 (1291 / 2520) 149.0 1.1 700
(1449 / 1449) 82.5 1.6 11'789 (1260 / 2520) 165.0 1.1 700
(1781 / 1781) 42.5 0.8 12'652 (1680 / 2880) 85.0 0.7 800
(1758 / 1758) 52.5 1.1 12'294 (1633 / 2880) 105.0 1.0 800
(1734 / 1734) 62.5 1.4 11'936 (1585 / 2880) 125.0 1.1 800
(1710 / 1710) 72.5 1.7 11'578 (1538 / 2880) 145.0 1.3 800
(1686 / 1686) 82.5 1.8 11'220 (1490 / 2880) 165.0 1.6 800
(1663 / 1663) 92.5 2.1 10'862 (1443 / 2880) 185.0 1.7 800
(1639 / 1639) 102.5 2.4 10'505 (1440 / 2880) 205.0 2.0 800
(2274 / 2274) 42.5 0.8 16'265 (2160 / 3645) 85.0 0.7 900
(2247 / 2247) 52.5 1.0 15'862 (2107 / 3645) 105.0 0.8 900
(2220 / 2220) 62.5 1.3 15'459 (2053 / 3645) 125.0 1.0 900
(2193 / 2193) 72.5 1.4 15'056 (1999 / 3645) 145.0 1.3 900
(2167 / 2167) 82.5 1.7 14'653 (1946 / 3645) 165.0 1.4 900
(2140 / 2140) 92.5 2.0 14'250 (1892 / 3645) 185.0 1.6 900
(2113 / 2113) 102.5 2.1 13'847 (1839 / 3645) 205.0 1.8 900
(2086 / 2086) 112.5 2.4 13'443 (1823 / 3645) 225.0 2.0 900
Te
Weight
[mm]
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
700
700
700
700
700
700
700
800
800
800
800
800
800
800
800
800
800
800
800
800
800
900
900
900
900
900
900
900
900
[mm]
73
89
105
121
137
73
89
105
121
137
153
73
89
105
121
137
153
169
94
115
136
157
178
199
94
115
136
157
178
199
94
115
136
157
178
199
220
94
115
136
157
178
199
220
110
135
160
185
210
235
260
110
135
160
185
210
235
260
285
[mm]
53
65
77
89
101
53
65
77
89
101
113
53
65
77
89
101
113
125
69
85
101
117
133
149
69
85
101
117
133
149
69
85
101
117
133
149
165
69
85
101
117
133
149
165
85
105
125
145
165
185
205
85
105
125
145
165
185
205
225
[kg]
53.8
65.0
76.3
87.5
98.7
60.6
73.3
85.9
98.5
111.2
123.8
67.4
81.5
95.5
109.6
123.6
137.7
151.7
102.6
124.2
145.8
167.4
189.0
210.6
119.9
145.1
170.3
195.5
220.8
246.0
140.0
169.5
198.9
228.4
257.8
287.3
316.7
160.1
193.8
227.5
261.2
294.9
328.6
362.3
197.0
239.0
280.9
322.9
364.9
406.9
448.9
249.6
302.8
356.0
409.2
462.4
515.6
568.8
622.0
Kz
Kxy
[kN/mm] [kN/mm]
1'563.0
4.08
1'274.5
3.32
1'075.8
2.81
930.8
2.43
820.2
2.14
1'975.8
4.58
1'611.0
3.74
1'360.0
3.16
1'176.6
2.73
1'036.8
2.41
926.7
2.15
2'417.8
5.09
1'971.5
4.15
1'664.2
3.51
1'439.8
3.03
1'268.8
2.67
1'134.0
2.39
1'025.2
2.16
1'639.9
4.70
1'331.2
3.81
1'120.4
3.21
967.1
2.77
850.8
2.44
759.4
2.17
2'170.5
5.48
1'761.9
4.45
1'482.8
3.74
1'280.0
3.23
1'126.0
2.84
1'005.1
2.54
2'890.7
6.39
2'346.6
5.19
1'974.9
4.37
1'704.8
3.77
1'499.7
3.32
1'338.7
2.96
1'208.9
2.67
3'663.1
7.30
2'973.6
5.93
2'502.5
4.99
2'160.3
4.31
1'900.4
3.79
1'696.3
3.38
1'531.8
3.05
2'666.7
6.78
2'158.7
5.49
1'813.3
4.61
1'563.2
3.97
1'373.7
3.49
1'225.2
3.11
1'105.7
2.81
4'092.2
8.58
3'312.7
6.94
2'782.7
5.83
2'398.9
5.03
2'108.1
4.42
1'880.2
3.94
1'696.8
3.56
1'545.9
3.24
If the minimum vertical loads indicated in the following tables (see pages 621) are not achieved, the elastomeric pad must be anchored to prevent
displacement. This anchoring can be achieved by means of shear lugs or
bolts, both of which can be fastened to the steel exterior of the elastomeric
bearing.
Ndmin
v
(Concrete/Steel) xyd ab
[kN]
[kN]
151
99
228
149
554
477
353
766
659
488
987
849
629
1'236
1'081
858
708
1'614
1'412
1'120
925
2'007
1'756
1'392
1'150
2'411
2'109
1'673
1'382
2'337
2'321
2'051
1'697
1'445
3'151
3'130
3'109
2'577
2'193
3'176
2'817
2'234
1'846
4'221
3'872
3'071
2'537
5'079
4'971
3'943
3'258
4'458
4'426
4'007
3'315
2'820
5'668
5'632
5'516
4'698
4'085
(38 / 38)
(38 / 38)
(52 / 52)
(51 / 51)
(80 / 80)
(80 / 80)
(79 / 79)
(101 / 101)
(100 / 100)
(99 / 99)
(122 / 122)
(121 / 121)
(119 / 119)
(136 / 136)
(135 / 135)
(134 / 134)
(133 / 133)
(164 / 164)
(163 / 163)
(162 / 162)
(160 / 160)
(193 / 193)
(191 / 191)
(189 / 189)
(188 / 188)
(221 / 221)
(219 / 219)
(217 / 217)
(215 / 215)
(208 / 208)
(207 / 207)
(205 / 205)
(204 / 204)
(203 / 203)
(279 / 279)
(278 / 278)
(276 / 276)
(274 / 274)
(272 / 272)
(335 / 335)
(333 / 333)
(330 / 330)
(327 / 327)
(421 / 421)
(417 / 417)
(414 / 414)
(410 / 410)
(506 / 506)
(502 / 502)
(498 / 498)
(494 / 494)
(444 / 444)
(441 / 441)
(438 / 438)
(435 / 435)
(432 / 432)
(565 / 565)
(561 / 561)
(558 / 558)
(554 / 554)
(551 / 551)
[mm] [%]
3.2
4.8
3.2
4.8
3.2
4.8
6.4
3.2
4.8
6.4
3.2
4.8
6.4
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
11.2
4.8
6.4
8.0
9.6
11.2
7.2
9.6
12.0
14.4
7.2
9.6
12.0
14.4
7.2
9.6
12.0
14.4
7.2
9.6
12.0
14.4
16.8
9.6
12.0
14.4
16.8
19.2
1.3
5.5
0.8
3.5
0.0
0.7
3.0
0.0
0.6
2.1
0.0
0.4
1.6
0.0
0.6
1.8
3.1
0.0
0.4
1.4
2.4
0.0
0.3
1.1
1.8
0.0
0.3
0.8
1.6
0.0
0.0
0.4
1.3
2.1
0.1
0.1
0.3
0.8
1.4
0.0
0.4
1.6
2.7
0.0
0.3
1.1
2.0
0.1
0.1
0.8
1.4
0.1
0.3
0.7
1.6
2.4
0.4
0.6
0.7
1.4
2.1
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
ab
Nd
[kN]
[kN]
[mm]
[%]
[kN]
[kN]
143
91
216
137
511
452
328
707
624
454
911
804
584
1'136
1'025
802
652
1'484
1'339
1'047
852
1'845
1'665
1'302
1'059
2'216
2'000
1'564
1'273
2'166
2'128
1'946
1'592
1'340
3'055
3'002
2'949
2'417
2'034
2'920
2'673
2'091
1'702
4'014
3'674
2'873
2'340
4'887
4'718
3'690
3'004
4'314
4'234
3'788
3'096
2'602
5'454
5'365
5'201
4'383
3'769
(36 / 36)
(35 / 35)
(49 / 49)
(47 / 47)
(78 / 78)
(75 / 75)
(73 / 73)
(98 / 98)
(95 / 95)
(92 / 92)
(118 / 118)
(114 / 114)
(111 / 111)
(131 / 131)
(128 / 128)
(125 / 125)
(122 / 122)
(158 / 158)
(155 / 155)
(151 / 151)
(148 / 148)
(185 / 185)
(181 / 181)
(177 / 177)
(173 / 173)
(212 / 212)
(207 / 207)
(203 / 203)
(198 / 198)
(202 / 202)
(198 / 198)
(195 / 195)
(191 / 191)
(188 / 188)
(271 / 271)
(266 / 266)
(262 / 262)
(257 / 257)
(252 / 252)
(323 / 323)
(316 / 316)
(309 / 309)
(302 / 302)
(405 / 405)
(396 / 396)
(387 / 387)
(378 / 378)
(487 / 487)
(476 / 476)
(466 / 466)
(455 / 455)
(430 / 430)
(422 / 422)
(414 / 414)
(406 / 406)
(398 / 398)
(544 / 544)
(535 / 535)
(526 / 526)
(517 / 517)
(508 / 508)
8.0
12.0
8.0
12.0
8.0
12.0
16.0
8.0
12.0
16.0
8.0
12.0
16.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
28.0
12.0
16.0
20.0
24.0
28.0
18.0
24.0
30.0
36.0
18.0
24.0
30.0
36.0
18.0
24.0
30.0
36.0
18.0
24.0
30.0
36.0
42.0
24.0
30.0
36.0
42.0
48.0
0.8
4.9
0.6
3.1
0.0
0.4
2.5
0.0
0.3
1.8
0.0
0.3
1.4
0.0
0.3
1.6
2.8
0.0
0.3
1.1
2.1
0.0
0.1
1.0
1.7
0.0
0.1
0.7
1.4
0.0
0.0
0.3
1.0
1.8
0.0
0.1
0.1
0.7
1.3
0.0
0.3
1.3
2.4
0.0
0.1
1.0
1.7
0.0
0.1
0.7
1.3
0.0
0.0
0.4
1.3
2.1
0.3
0.4
0.6
1.3
2.0
129
77
195
116
444
410
286
613
566
396
790
730
510
979
932
708
559
1'278
1'217
925
730
1'589
1'513
1'150
908
1'909
1'818
1'382
1'091
1'895
1'825
1'756
1'417
1'164
2'876
2'771
2'665
2'151
1'767
2'519
2'400
1'851
1'463
3'462
3'299
2'544
2'010
4'445
4'236
3'267
2'582
3'911
3'758
3'424
2'732
2'238
5'099
4'921
4'675
3'857
3'243
(34 / 68)
(34 / 68)
(45 / 90)
(45 / 90)
(73 / 135)
(68 / 135)
(68 / 135)
(92 / 169)
(86 / 169)
(85 / 169)
(111 / 203)
(104 / 203)
(102 / 203)
(122 / 225)
(117 / 225)
(113 / 225)
(113 / 225)
(148 / 270)
(141 / 270)
(135 / 270)
(135 / 270)
(173 / 315)
(165 / 315)
(158 / 315)
(158 / 315)
(198 / 360)
(189 / 360)
(180 / 360)
(180 / 360)
(191 / 338)
(184 / 338)
(177 / 338)
(170 / 338)
(169 / 338)
(257 / 450)
(247 / 450)
(238 / 450)
(229 / 450)
(225 / 450)
(302 / 540)
(287 / 540)
(273 / 540)
(270 / 540)
(378 / 675)
(361 / 675)
(343 / 675)
(338 / 675)
(455 / 810)
(434 / 810)
(413 / 810)
(405 / 810)
(406 / 709)
(390 / 709)
(374 / 709)
(359 / 709)
(355 / 709)
(508 / 900)
(491 / 900)
(473 / 900)
(455 / 900)
(450 / 900)
ab
Bearing dimensions/Parameters
a
Te
0.3
4.1
0.1
2.5
0.0
0.0
2.0
0.0
0.0
1.4
0.0
0.0
1.0
0.0
0.0
1.1
2.3
0.0
0.0
0.8
1.7
0.0
0.0
0.7
1.3
0.0
0.0
0.6
1.1
0.0
0.0
0.0
0.7
1.4
0.0
0.0
0.0
0.4
1.0
0.0
0.0
0.8
2.0
0.0
0.0
0.6
1.4
0.0
0.0
0.4
1.0
0.0
0.0
0.1
0.8
1.7
0.1
0.1
0.3
0.8
1.6
100
100
100
100
150
150
150
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
300
300
300
300
300
300
300
300
300
300
300
300
350
350
350
350
350
400
400
400
400
400
150
150
200
200
200
200
200
250
250
250
300
300
300
250
250
250
250
300
300
300
300
350
350
350
350
400
400
400
400
300
300
300
300
300
400
400
400
400
400
400
400
400
400
500
500
500
500
600
600
600
600
450
450
450
450
450
500
500
500
500
500
49
60
49
60
49
60
71
49
60
71
49
60
71
60
71
82
93
60
71
82
93
60
71
82
93
60
71
82
93
60
71
82
93
104
60
71
82
93
104
80
96
112
128
80
96
112
128
80
96
112
128
80
96
112
128
144
96
112
128
144
160
16
24
16
24
16
24
32
16
24
32
16
24
32
24
32
40
48
24
32
40
48
24
32
40
48
24
32
40
48
24
32
40
48
56
24
32
40
48
56
36
48
60
72
36
48
60
72
36
48
60
72
36
48
60
72
84
48
60
72
84
96
Weight
[kg]
3.8
4.3
5.1
5.8
7.8
8.8
9.8
9.9
11.1
12.3
11.9
13.3
14.8
14.9
16.6
18.2
19.9
18.0
20.0
21.9
23.9
21.0
23.4
25.7
28.0
24.1
26.7
29.4
32.1
22.6
25.1
27.6
30.1
32.6
30.3
33.6
37.0
40.3
43.6
45.7
51.3
56.8
62.4
57.3
64.3
71.2
78.2
68.9
77.3
85.6
94.0
60.2
67.6
74.9
82.2
89.6
86.1
95.4
104.8
114.1
123.4
Kz
Kxy
[kN/mm] [kN/mm]
43.5
29.0
72.6
48.4
188.5
125.7
94.3
282.5
188.3
141.2
384.9
256.6
192.5
354.4
265.8
212.6
177.2
492.8
369.6
295.7
246.4
641.9
481.4
385.1
321.0
799.0
599.2
479.4
399.5
785.4
589.1
471.3
392.7
336.6
1'299.8
974.9
779.9
649.9
557.1
627.0
470.3
376.2
313.5
925.5
694.1
555.3
462.8
1'248.1
936.1
748.8
624.0
1'064.9
798.7
638.9
532.5
456.4
1'259.9
1'007.9
839.9
720.0
630.0
0.84
0.56
1.12
0.75
1.69
1.12
0.84
2.11
1.41
1.05
2.53
1.69
1.27
1.88
1.41
1.12
0.94
2.25
1.69
1.35
1.12
2.62
1.97
1.58
1.31
3.00
2.25
1.80
1.50
2.81
2.11
1.69
1.41
1.21
3.75
2.81
2.25
1.88
1.61
3.00
2.25
1.80
1.50
3.75
2.81
2.25
1.88
4.50
3.38
2.70
2.25
3.94
2.95
2.36
1.97
1.69
3.75
3.00
2.50
2.14
1.88
If the minimum vertical loads indicated in the following tables (see pages 621) are not achieved, the elastomeric pad must be anchored to prevent
displacement. This anchoring can be achieved by means of shear lugs or
bolts, both of which can be fastened to the steel exterior of the elastomeric
bearing.
Ndmin
v
ab
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
[kN]
[mm] [%] [kN]
(680 / 680)
9.6 0.4 6'563
(675 / 675)
12.0 0.6 6'456
(671 / 671)
14.4 0.7 6'349
(667 / 667)
16.8 1.1 5'700
(663 / 663)
19.2 1.7 4'902
(768 / 768)
9.6 0.6 7'455
(764 / 764)
12.0 0.7 7'348
(760 / 760)
14.4 0.8 7'241
(756 / 756)
16.8 1.0 7'134
(751 / 751)
19.2 1.3 6'794
(747 / 747)
21.6 1.7 5'947
(857 / 857)
9.6 0.6 8'347
(853 / 853)
12.0 0.7 8'240
(849 / 849)
14.4 0.8 8'133
(844 / 844)
16.8 1.0 8'026
(840 / 840)
19.2 1.3 7'919
(836 / 836)
21.6 1.4 7'812
(832 / 832)
24.0 1.8 7'043
(1029 / 1029) 12.8 0.6 9'363
(1023 / 1023) 16.0 0.8 9'230
(1018 / 1018) 19.2 1.0 9'096
(1012 / 1012) 22.4 1.1 8'962
(1006 / 1006) 25.6 1.7 8'023
(1001 / 1001) 28.8 2.4 7'023
(1203 / 1203) 12.8 0.7 10'945
(1196 / 1196) 16.0 0.8 10'789
(1190 / 1190) 19.2 1.0 10'632
(1183 / 1183) 22.4 1.1 10'476
(1176 / 1176) 25.6 1.4 10'109
(1170 / 1170) 28.8 2.0 8'849
(1411 / 1411) 12.8 0.7 12'900
(1404 / 1404) 16.0 0.8 12'743
(1397 / 1397) 19.2 1.0 12'587
(1391 / 1391) 22.4 1.3 12'431
(1384 / 1384) 25.6 1.4 12'274
(1377 / 1377) 28.8 1.6 12'118
(1371 / 1371) 32.0 1.8 11'882
(1614 / 1614) 12.8 0.7 14'764
(1607 / 1607) 16.0 0.8 14'585
(1599 / 1599) 19.2 1.0 14'406
(1591 / 1591) 22.4 1.1 14'227
(1584 / 1584) 25.6 1.4 14'048
(1576 / 1576) 28.8 1.6 13'869
(1569 / 1569) 32.0 1.7 13'690
(1844 / 1844) 16.0 1.0 13'457
(1835 / 1835) 20.0 1.3 13'278
(1825 / 1825) 24.0 1.6 13'099
(1816 / 1816) 28.0 1.8 12'921
(1806 / 1806) 32.0 2.1 12'742
(1797 / 1797) 36.0 2.4 12'563
(1787 / 1787) 40.0 2.7 12'384
(2345 / 2345) 16.0 0.8 17'172
(2334 / 2334) 20.0 1.1 16'971
(2323 / 2323) 24.0 1.4 16'769
(2313 / 2313) 28.0 1.6 16'568
(2302 / 2302) 32.0 1.8 16'366
(2291 / 2291) 36.0 2.1 16'164
(2280 / 2280) 40.0 2.3 15'963
(2270 / 2270) 44.0 2.5 15'761
[kN]
(654 / 654)
(643 / 643)
(633 / 633)
(622 / 622)
(611 / 611)
(743 / 743)
(732 / 732)
(722 / 722)
(711 / 711)
(700 / 700)
(690 / 690)
(832 / 832)
(821 / 821)
(810 / 810)
(800 / 800)
(789 / 789)
(778 / 778)
(768 / 768)
(995 / 995)
(981 / 981)
(967 / 967)
(952 / 952)
(938 / 938)
(924 / 924)
(1163 / 1163)
(1146 / 1146)
(1130 / 1130)
(1113 / 1113)
(1097 / 1097)
(1080 / 1080)
(1371 / 1371)
(1354 / 1354)
(1337 / 1337)
(1321 / 1321)
(1304 / 1304)
(1288 / 1288)
(1271 / 1271)
(1569 / 1569)
(1550 / 1550)
(1531 / 1531)
(1512 / 1512)
(1493 / 1493)
(1474 / 1474)
(1455 / 1455)
(1787 / 1787)
(1763 / 1763)
(1740 / 1740)
(1716 / 1716)
(1692 / 1692)
(1668 / 1668)
(1645 / 1645)
(2280 / 2280)
(2254 / 2254)
(2227 / 2227)
(2200 / 2200)
(2173 / 2173)
(2147 / 2147)
(2120 / 2120)
(2093 / 2093)
[mm]
24.0
30.0
36.0
42.0
48.0
24.0
30.0
36.0
42.0
48.0
54.0
24.0
30.0
36.0
42.0
48.0
54.0
60.0
32.0
40.0
48.0
56.0
64.0
72.0
32.0
40.0
48.0
56.0
64.0
72.0
32.0
40.0
48.0
56.0
64.0
72.0
80.0
32.0
40.0
48.0
56.0
64.0
72.0
80.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
ab
Nd
[%]
0.4
0.4
0.6
1.0
1.6
0.4
0.6
0.7
0.8
1.1
1.6
0.4
0.6
0.7
0.8
1.0
1.1
1.6
0.6
0.7
0.8
1.0
1.4
2.1
0.6
0.7
0.8
1.0
1.3
1.8
0.6
0.7
0.8
1.1
1.3
1.4
1.6
0.6
0.7
0.8
1.0
1.1
1.4
1.6
0.8
1.1
1.4
1.7
1.8
2.1
2.4
0.8
1.0
1.3
1.4
1.7
2.0
2.1
2.3
[kN]
6'135
5'921
5'707
5'016
4'218
7'027
6'813
6'599
6'385
5'966
5'119
7'919
7'705
7'491
7'277
7'063
6'848
6'065
8'828
8'561
8'293
8'026
7'050
6'051
10'320
10'007
9'694
9'381
8'883
7'624
12'274
11'961
11'649
11'336
11'023
10'711
10'329
14'048
13'690
13'332
12'974
12'616
12'258
11'900
12'742
12'384
12'026
11'668
11'310
10'952
10'594
16'366
15'963
15'560
15'157
14'754
14'350
13'947
13'544
[kN]
(611 / 1080)
(590 / 1080)
(569 / 1080)
(548 / 1080)
(540 / 1080)
(700 / 1215)
(679 / 1215)
(658 / 1215)
(636 / 1215)
(615 / 1215)
(608 / 1215)
(789 / 1350)
(768 / 1350)
(746 / 1350)
(725 / 1350)
(704 / 1350)
(682 / 1350)
(675 / 1350)
(938 / 1620)
(910 / 1620)
(881 / 1620)
(853 / 1620)
(825 / 1620)
(810 / 1620)
(1097 / 1890)
(1063 / 1890)
(1030 / 1890)
(997 / 1890)
(964 / 1890)
(945 / 1890)
(1304 / 2205)
(1271 / 2205)
(1238 / 2205)
(1205 / 2205)
(1171 / 2205)
(1138 / 2205)
(1105 / 2205)
(1493 / 2520)
(1455 / 2520)
(1417 / 2520)
(1379 / 2520)
(1341 / 2520)
(1303 / 2520)
(1265 / 2520)
(1692 / 2880)
(1645 / 2880)
(1597 / 2880)
(1550 / 2880)
(1502 / 2880)
(1455 / 2880)
(1440 / 2880)
(2173 / 3645)
(2120 / 3645)
(2066 / 3645)
(2013 / 3645)
(1959 / 3645)
(1906 / 3645)
(1852 / 3645)
(1823 / 3645)
[mm]
48.0
60.0
72.0
84.0
96.0
48.0
60.0
72.0
84.0
96.0
108.0
48.0
60.0
72.0
84.0
96.0
108.0
120.0
64.0
80.0
96.0
112.0
128.0
144.0
64.0
80.0
96.0
112.0
128.0
144.0
64.0
80.0
96.0
112.0
128.0
144.0
160.0
64.0
80.0
96.0
112.0
128.0
144.0
160.0
80.0
100.0
120.0
140.0
160.0
180.0
200.0
80.0
100.0
120.0
140.0
160.0
180.0
200.0
220.0
ab
Bearing dimensions/Parameters
a
Te
Weight
[mm]
48
60
72
84
96
48
60
72
84
96
108
48
60
72
84
96
108
120
64
80
96
112
128
144
64
80
96
112
128
144
64
80
96
112
128
144
160
64
80
96
112
128
144
160
80
100
120
140
160
180
200
80
100
120
140
160
180
200
220
[kg]
103.5
114.7
125.9
137.2
148.4
116.6
129.3
141.9
154.5
167.2
179.8
129.8
143.8
157.9
171.9
186.0
200.0
214.1
172.1
193.7
215.3
236.9
258.5
280.0
201.0
226.2
251.5
276.7
301.9
327.1
234.8
264.3
293.7
323.2
352.6
382.1
411.5
268.6
302.3
336.0
369.7
403.4
437.1
470.8
321.1
363.1
405.1
447.1
489.1
531.1
573.0
407.0
460.2
513.4
566.6
619.8
673.0
726.2
779.4
Kz
Kxy
[kN/mm] [kN/mm]
1'725.8
4.50
1'380.7
3.60
1'150.6
3.00
986.2
2.57
862.9
2.25
2'181.6
5.06
1'745.3
4.05
1'454.4
3.38
1'246.6
2.89
1'090.8
2.53
969.6
2.25
2'669.7
5.62
2'135.7
4.50
1'779.8
3.75
1'525.5
3.21
1'334.8
2.81
1'186.5
2.50
1'067.9
2.25
1'768.1
5.06
1'414.4
4.05
1'178.7
3.38
1'010.3
2.89
884.0
2.53
785.8
2.25
2'340.0
5.91
1'872.0
4.72
1'560.0
3.94
1'337.2
3.38
1'170.0
2.95
1'040.0
2.62
3'116.6
6.89
2'493.3
5.51
2'077.7
4.59
1'780.9
3.94
1'558.3
3.45
1'385.1
3.06
1'246.6
2.76
3'949.3
7.88
3'159.4
6.30
2'632.9
5.25
2'256.7
4.50
1'974.6
3.94
1'755.2
3.50
1'579.7
3.15
2'833.3
7.20
2'266.7
5.76
1'888.9
4.80
1'619.1
4.11
1'416.7
3.60
1'259.3
3.20
1'133.3
2.88
4'348.0
9.11
3'478.4
7.29
2'898.6
6.08
2'484.6
5.21
2'174.0
4.56
1'932.4
4.05
1'739.2
3.64
1'581.1
3.31
Ndmin
v
ab
(Concrete/Steel) xyd
[kN]
(38 / 38)
(37 / 37)
(51 / 51)
(50 / 50)
(80 / 80)
(79 / 79)
(78 / 78)
(101 / 101)
(100 / 100)
(99 / 99)
(122 / 122)
(120 / 120)
(119 / 119)
(136 / 136)
(135 / 135)
(134 / 134)
(133 / 133)
(164 / 164)
(163 / 163)
(161 / 161)
(160 / 160)
(192 / 192)
(190 / 190)
(189 / 189)
(187 / 187)
(220 / 220)
(218 / 218)
(216 / 216)
(214 / 214)
(208 / 208)
(206 / 206)
(205 / 205)
(204 / 204)
(202 / 202)
(279 / 279)
(277 / 277)
(275 / 275)
(273 / 273)
(271 / 271)
(335 / 335)
(332 / 332)
(329 / 329)
(326 / 326)
(420 / 420)
(417 / 417)
(413 / 413)
(409 / 409)
(505 / 505)
(501 / 501)
(497 / 497)
(493 / 493)
(444 / 444)
(441 / 441)
(437 / 437)
(434 / 434)
(431 / 431)
(564 / 564)
(561 / 561)
(557 / 557)
(554 / 554)
(550 / 550)
[mm]
3.7
5.3
3.7
5.3
3.7
5.3
6.9
3.7
5.3
6.9
3.7
5.3
6.9
5.3
6.9
8.5
10.1
5.3
6.9
8.5
10.1
5.3
6.9
8.5
10.1
5.3
6.9
8.5
10.1
5.3
6.9
8.5
10.1
11.7
5.3
6.9
8.5
10.1
11.7
7.7
10.1
12.5
14.9
7.7
10.1
12.5
14.9
7.7
10.1
12.5
14.9
7.7
10.1
12.5
14.9
17.3
10.1
12.5
14.9
17.3
19.7
[%]
2.3
6.1
1.4
4.0
0.0
1.3
3.4
0.0
1.0
2.4
0.0
0.7
1.8
0.0
0.8
2.1
3.4
0.0
0.7
1.7
2.5
0.0
0.6
1.3
2.1
0.0
0.4
1.0
1.7
0.0
0.0
0.6
1.4
2.3
0.1
0.1
0.4
1.0
1.6
0.0
0.6
1.7
2.8
0.0
0.4
1.3
2.1
0.1
0.3
1.0
1.6
0.1
0.3
0.8
1.7
2.5
0.4
0.6
0.8
1.6
2.3
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
[kN]
122
81
184
122
507
405
301
700
560
416
902
721
537
1'128
944
749
615
1'473
1'233
978
804
1'832
1'533
1'216
999
2'201
1'842
1'461
1'201
2'154
2'116
1'821
1'505
1'275
3'039
2'986
2'764
2'284
1'935
2'907
2'529
1'997
1'637
3'995
3'476
2'745
2'250
4'864
4'463
3'525
2'889
4'297
4'218
3'622
2'980
2'516
5'436
5'347
5'009
4'241
3'660
[kN]
(36 / 36)
(34 / 34)
(48 / 48)
(46 / 46)
(77 / 77)
(75 / 75)
(72 / 72)
(97 / 97)
(94 / 94)
(91 / 91)
(117 / 117)
(113 / 113)
(110 / 110)
(130 / 130)
(127 / 127)
(124 / 124)
(122 / 122)
(157 / 157)
(154 / 154)
(150 / 150)
(147 / 147)
(184 / 184)
(180 / 180)
(176 / 176)
(172 / 172)
(211 / 211)
(206 / 206)
(201 / 201)
(197 / 197)
(201 / 201)
(197 / 197)
(194 / 194)
(190 / 190)
(187 / 187)
(270 / 270)
(265 / 265)
(260 / 260)
(255 / 255)
(251 / 251)
(321 / 321)
(314 / 314)
(307 / 307)
(300 / 300)
(403 / 403)
(394 / 394)
(385 / 385)
(377 / 377)
(485 / 485)
(474 / 474)
(464 / 464)
(453 / 453)
(428 / 428)
(421 / 421)
(413 / 413)
(405 / 405)
(397 / 397)
(542 / 542)
(533 / 533)
(524 / 524)
(515 / 515)
(506 / 506)
[mm]
9.2
13.2
9.2
13.2
9.2
13.2
17.2
9.2
13.2
17.2
9.2
13.2
17.2
13.2
17.2
21.2
25.2
13.2
17.2
21.2
25.2
13.2
17.2
21.2
25.2
13.2
17.2
21.2
25.2
13.2
17.2
21.2
25.2
29.2
13.2
17.2
21.2
25.2
29.2
19.2
25.2
31.2
37.2
19.2
25.2
31.2
37.2
19.2
25.2
31.2
37.2
19.2
25.2
31.2
37.2
43.2
25.2
31.2
37.2
43.2
49.2
ab
Nd
[%]
1.8
5.5
1.1
3.7
0.0
1.0
3.0
0.0
0.7
2.1
0.0
0.6
1.6
0.0
0.7
1.8
3.0
0.0
0.4
1.4
2.4
0.0
0.4
1.1
1.8
0.0
0.3
0.8
1.4
0.0
0.0
0.4
1.3
2.0
0.0
0.1
0.3
0.8
1.4
0.0
0.4
1.6
2.5
0.0
0.3
1.1
1.8
0.0
0.1
0.8
1.4
0.0
0.0
0.6
1.4
2.3
0.3
0.4
0.7
1.4
2.0
[kN]
108
67
163
101
435
363
260
601
502
359
775
647
462
964
851
656
522
1'259
1'111
856
682
1'566
1'382
1'065
848
1'881
1'660
1'279
1'019
1'873
1'804
1'646
1'329
1'099
2'843
2'738
2'498
2'018
1'669
2'494
2'290
1'758
1'398
3'428
3'147
2'416
1'921
4'401
4'041
3'103
2'467
3'879
3'726
3'258
2'616
2'152
5'062
4'884
4'483
3'715
3'134
[kN]
(34 / 68)
(34 / 68)
(45 / 90)
(45 / 90)
(72 / 135)
(68 / 135)
(68 / 135)
(90 / 169)
(85 / 169)
(85 / 169)
(109 / 203)
(102 / 203)
(102 / 203)
(121 / 225)
(115 / 225)
(113 / 225)
(113 / 225)
(145 / 270)
(138 / 270)
(135 / 270)
(135 / 270)
(170 / 315)
(162 / 315)
(158 / 315)
(158 / 315)
(195 / 360)
(186 / 360)
(180 / 360)
(180 / 360)
(189 / 338)
(182 / 338)
(175 / 338)
(169 / 338)
(169 / 338)
(254 / 450)
(245 / 450)
(235 / 450)
(226 / 450)
(225 / 450)
(299 / 540)
(285 / 540)
(270 / 540)
(270 / 540)
(375 / 675)
(357 / 675)
(339 / 675)
(338 / 675)
(451 / 810)
(429 / 810)
(408 / 810)
(405 / 810)
(403 / 709)
(387 / 709)
(371 / 709)
(355 / 709)
(355 / 709)
(505 / 900)
(487 / 900)
(469 / 900)
(451 / 900)
(450 / 900)
[mm]
18.5
26.5
18.5
26.5
18.5
26.5
34.5
18.5
26.5
34.5
18.5
26.5
34.5
26.5
34.5
42.5
50.5
26.5
34.5
42.5
50.5
26.5
34.5
42.5
50.5
26.5
34.5
42.5
50.5
26.5
34.5
42.5
50.5
58.5
26.5
34.5
42.5
50.5
58.5
38.5
50.5
62.5
74.5
38.5
50.5
62.5
74.5
38.5
50.5
62.5
74.5
38.5
50.5
62.5
74.5
86.5
50.5
62.5
74.5
86.5
98.5
ab
Bearing dimensions/Parameters
a
Te
Weight
[mm] [kg]
19
2.6
27
3.1
19
3.5
27
4.1
19
5.3
27
6.3
35
7.3
19
6.7
27
7.9
35
9.1
19
8.1
27
9.5
35
11.0
27
10.7
35
12.3
43
14.0
51
15.6
27
12.8
35
14.8
43
16.8
51
18.8
27
15.0
35
17.3
43
19.7
51
22.0
27
17.2
35
19.9
43
22.5
51
25.2
27
16.1
35
18.6
43
21.1
51
23.6
59
26.1
27
21.6
35
25.0
43
28.3
51
31.6
59
35.0
39
33.4
51
39.0
63
44.6
75
50.1
39
41.9
51
48.9
63
55.8
75
62.8
39
50.4
51
58.7
63
67.1
75
75.5
39
44.0
51
51.4
63
58.7
75
66.0
87
73.4
51
65.4
63
74.8
75
84.1
87
93.4
99 102.8
Kz
Kxy
[kN/mm] [kN/mm]
37.7
0.73
26.3
0.51
62.8
0.97
43.8
0.68
163.1
1.46
113.8
1.02
87.4
0.78
244.3
1.82
170.5
1.27
131.0
0.98
332.9
2.19
232.4
1.53
178.5
1.17
320.9
1.70
246.5
1.30
200.1
1.06
168.4
0.89
446.4
2.04
342.9
1.57
278.3
1.27
234.2
1.07
581.4
2.38
446.5
1.83
362.5
1.48
305.1
1.25
723.6
2.72
555.8
2.09
451.2
1.69
379.7
1.43
711.3
2.55
546.4
1.96
443.5
1.59
373.3
1.34
322.2
1.15
1'177.2
3.40
904.2
2.61
734.0
2.12
617.7
1.78
533.3
1.54
586.3
2.81
447.0
2.14
361.2
1.73
303.0
1.45
865.4
3.51
659.8
2.67
533.1
2.16
447.2
1.81
1'167.0
4.21
889.7
3.21
718.9
2.59
603.1
2.17
995.8
3.68
759.1
2.81
613.4
2.27
514.6
1.90
443.2
1.64
1'197.5
3.56
967.6
2.88
811.8
2.42
699.1
2.08
614.0
1.83
Ndmin
v
ab
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
[kN]
[mm] [%] [kN]
(679 / 679)
10.1 0.4 6'541
(674 / 674)
12.5 0.6 6'434
(670 / 670)
14.9 0.7 6'327
(666 / 666)
17.3 1.3 5'516
(662 / 662)
19.7 1.7 4'761
(768 / 768)
10.1 0.6 7'433
(763 / 763)
12.5 0.7 7'326
(759 / 759)
14.9 0.8 7'219
(755 / 755)
17.3 1.0 7'112
(751 / 751)
19.7 1.3 6'600
(746 / 746)
22.1 1.8 5'793
(856 / 856)
10.1 0.6 8'324
(852 / 852)
12.5 0.7 8'217
(848 / 848)
14.9 0.8 8'110
(844 / 844)
17.3 1.0 8'003
(839 / 839)
19.7 1.3 7'896
(835 / 835)
22.1 1.4 7'733
(831 / 831)
24.5 1.8 6'879
(1028 / 1028) 13.3 0.7 9'342
(1023 / 1023) 16.5 0.8 9'209
(1017 / 1017) 19.7 1.0 9'075
(1011 / 1011) 22.9 1.1 8'941
(1006 / 1006) 26.1 1.8 7'851
(1000 / 1000) 29.3 2.5 6'887
(1202 / 1202) 13.3 0.7 10'921
(1195 / 1195) 16.5 0.8 10'764
(1189 / 1189) 19.7 1.0 10'608
(1182 / 1182) 22.9 1.1 10'452
(1175 / 1175) 26.1 1.6 9'892
(1169 / 1169) 29.3 2.1 8'677
(1409 / 1409) 13.3 0.7 12'875
(1403 / 1403) 16.5 0.8 12'719
(1396 / 1396) 19.7 1.0 12'562
(1390 / 1390) 22.9 1.3 12'406
(1383 / 1383) 26.1 1.4 12'250
(1376 / 1376) 29.3 1.6 12'093
(1370 / 1370) 32.5 1.8 11'676
(1613 / 1613) 13.3 0.7 14'736
(1605 / 1605) 16.5 0.8 14'557
(1598 / 1598) 19.7 1.0 14'378
(1590 / 1590) 22.9 1.1 14'199
(1583 / 1583) 26.1 1.4 14'020
(1575 / 1575) 29.3 1.6 13'841
(1567 / 1567) 32.5 1.7 13'662
(1843 / 1843) 16.5 1.0 13'435
(1834 / 1834) 20.5 1.3 13'256
(1824 / 1824) 24.5 1.6 13'077
(1815 / 1815) 28.5 1.8 12'898
(1805 / 1805) 32.5 2.1 12'719
(1796 / 1796) 36.5 2.4 12'540
(1786 / 1786) 40.5 2.7 12'361
(2343 / 2343) 16.5 0.8 17'147
(2333 / 2333) 20.5 1.1 16'945
(2322 / 2322) 24.5 1.4 16'744
(2311 / 2311) 28.5 1.6 16'542
(2301 / 2301) 32.5 1.8 16'341
(2290 / 2290) 36.5 2.1 16'139
(2279 / 2279) 40.5 2.3 15'938
(2268 / 2268) 44.5 2.5 15'736
ab
Nd
ab
Bearing dimensions/Parameters
a
Te
[kN]
[mm] [%] [kN]
[kN]
[mm] [%] [mm] [mm] [mm] [mm]
(652 / 652)
25.2 0.4 6'090
(607 / 1080) 50.5 0.3 400 600 84.5 51
(641 / 641)
31.2 0.4 5'876
(586 / 1080) 62.5 0.3 400 600 100.5 63
(631 / 631)
37.2 0.6 5'662
(564 / 1080) 74.5 0.4 400 600 116.5 75
(620 / 620)
43.2 1.0 4'832
(543 / 1080) 86.5 0.7 400 600 132.5 87
(609 / 609)
49.2 1.6 4'076
(540 / 1080) 98.5 1.3 400 600 148.5 99
(741 / 741)
25.2 0.4 6'982
(696 / 1215) 50.5 0.3 450 600 84.5 51
(730 / 730)
31.2 0.6 6'768
(674 / 1215) 62.5 0.4 450 600 100.5 63
(719 / 719)
37.2 0.7 6'554
(653 / 1215) 74.5 0.4 450 600 116.5 75
(709 / 709)
43.2 0.8 6'340
(632 / 1215) 86.5 0.6 450 600 132.5 87
(698 / 698)
49.2 1.1 5'772
(611 / 1215) 98.5 0.8 450 600 148.5 99
(687 / 687)
55.2 1.6 4'966
(608 / 1215) 110.5 1.3 450 600 164.5 111
(829 / 829)
25.2 0.4 7'874
(785 / 1350) 50.5 0.3 500 600 84.5 51
(819 / 819)
31.2 0.6 7'660
(763 / 1350) 62.5 0.4 500 600 100.5 63
(808 / 808)
37.2 0.7 7'446
(742 / 1350) 74.5 0.6 500 600 116.5 75
(797 / 797)
43.2 0.8 7'232
(721 / 1350) 86.5 0.7 500 600 132.5 87
(787 / 787)
49.2 1.0 7'018
(699 / 1350) 98.5 0.7 500 600 148.5 99
(776 / 776)
55.2 1.1 6'754
(678 / 1350) 110.5 0.8 500 600 164.5 111
(766 / 766)
61.2 1.7 5'901
(675 / 1350) 122.5 1.3 500 600 180.5 123
(993 / 993)
33.2 0.6 8'786
(934 / 1620) 66.5 0.3 600 600 104.5 67
(979 / 979)
41.2 0.7 8'519
(905 / 1620) 82.5 0.4 600 600 125.5 83
(964 / 964)
49.2 0.8 8'251
(877 / 1620) 98.5 0.4 600 600 146.5 99
(950 / 950)
57.2 1.0 7'984
(849 / 1620) 114.5 0.6 600 600 167.5 115
(936 / 936)
65.2 1.6 6'878
(820 / 1620) 130.5 1.1 600 600 188.5 131
(922 / 922)
73.2 2.3 5'914
(810 / 1620) 146.5 1.7 600 600 209.5 147
(1160 / 1160) 33.2 0.6 10'271 (1091 / 1890) 66.5 0.4 600 700 104.5 67
(1144 / 1144) 41.2 0.7 9'958 (1058 / 1890) 82.5 0.4 600 700 125.5 83
(1127 / 1127) 49.2 0.8 9'645 (1025 / 1890) 98.5 0.6 600 700 146.5 99
(1111 / 1111) 57.2 1.0 9'333
(992 / 1890) 114.5 0.7 600 700 167.5 115
(1094 / 1094) 65.2 1.3 8'666
(959 / 1890) 130.5 1.0 600 700 188.5 131
(1077 / 1077) 73.2 1.8 7'452
(945 / 1890) 146.5 1.4 600 700 209.5 147
(1368 / 1368) 33.2 0.6 12'225 (1299 / 2205) 66.5 0.4 700 700 104.5 67
(1351 / 1351) 41.2 0.7 11'913 (1266 / 2205) 82.5 0.6 700 700 125.5 83
(1335 / 1335) 49.2 0.8 11'600 (1233 / 2205) 98.5 0.7 700 700 146.5 99
(1318 / 1318) 57.2 1.1 11'287 (1199 / 2205) 114.5 0.8 700 700 167.5 115
(1302 / 1302) 65.2 1.3 10'974 (1166 / 2205) 130.5 1.0 700 700 188.5 131
(1285 / 1285) 73.2 1.4 10'662 (1133 / 2205) 146.5 1.0 700 700 209.5 147
(1268 / 1268) 81.2 1.6 10'122 (1103 / 2205) 162.5 1.3 700 700 230.5 163
(1566 / 1566) 33.2 0.6 13'992 (1487 / 2520) 66.5 0.4 700 800 104.5 67
(1547 / 1547) 41.2 0.7 13'634 (1449 / 2520) 82.5 0.6 700 800 125.5 83
(1528 / 1528) 49.2 0.8 13'276 (1411 / 2520) 98.5 0.7 700 800 146.5 99
(1509 / 1509) 57.2 1.0 12'918 (1373 / 2520) 114.5 0.8 700 800 167.5 115
(1490 / 1490) 65.2 1.1 12'560 (1335 / 2520) 130.5 1.0 700 800 188.5 131
(1471 / 1471) 73.2 1.4 12'202 (1297 / 2520) 146.5 1.1 700 800 209.5 147
(1452 / 1452) 81.2 1.6 11'845 (1260 / 2520) 162.5 1.1 700 800 230.5 163
(1784 / 1784) 41.2 0.8 12'697 (1686 / 2880) 82.5 0.7 800 800 120.5 83
(1761 / 1761) 51.2 1.1 12'339 (1639 / 2880) 102.5 1.0 800 800 145.5 103
(1737 / 1737) 61.2 1.4 11'981 (1591 / 2880) 122.5 1.1 800 800 170.5 123
(1713 / 1713) 71.2 1.7 11'623 (1544 / 2880) 142.5 1.3 800 800 195.5 143
(1689 / 1689) 81.2 1.8 11'265 (1496 / 2880) 162.5 1.6 800 800 220.5 163
(1665 / 1665) 91.2 2.1 10'907 (1449 / 2880) 182.5 1.7 800 800 245.5 183
(1642 / 1642) 101.2 2.4 10'549 (1440 / 2880) 202.5 2.0 800 800 270.5 203
(2277 / 2277) 41.2 0.8 16'316 (2167 / 3645) 82.5 0.7 900 900 120.5 83
(2250 / 2250) 51.2 1.0 15'912 (2113 / 3645) 102.5 0.8 900 900 145.5 103
(2224 / 2224) 61.2 1.3 15'509 (2060 / 3645) 122.5 1.0 900 900 170.5 123
(2197 / 2197) 71.2 1.4 15'106 (2006 / 3645) 142.5 1.3 900 900 195.5 143
(2170 / 2170) 81.2 1.7 14'703 (1953 / 3645) 162.5 1.4 900 900 220.5 163
(2143 / 2143) 91.2 2.0 14'300 (1899 / 3645) 182.5 1.6 900 900 245.5 183
(2117 / 2117) 101.2 2.1 13'897 (1846 / 3645) 202.5 1.8 900 900 270.5 203
(2090 / 2090) 111.2 2.3 13'494 (1823/3645) 222.5 2.0 900 900 295.5 223
Weight
[kg]
78.7
89.9
101.1
112.3
123.5
88.6
101.3
113.9
126.5
139.2
151.8
98.6
112.6
126.7
140.8
154.8
168.9
182.9
137.4
158.9
180.5
202.1
223.7
245.3
160.4
185.7
210.9
236.1
261.3
286.5
187.4
216.9
246.3
275.8
305.2
334.7
364.1
214.4
248.1
281.7
315.4
349.1
382.8
416.5
259.0
301.0
343.0
385.0
427.0
469.0
511.0
328.3
381.5
434.7
487.9
541.1
594.3
647.5
700.7
Kz
Kxy
[kN/mm] [kN/mm]
1'640.4
4.28
1'325.4
3.46
1'111.9
2.90
957.7
2.50
841.0
2.19
2'073.6
4.81
1'675.5
3.89
1'405.6
3.26
1'210.6
2.81
1'063.1
2.47
947.7
2.20
2'537.5
5.35
2'050.3
4.32
1'720.1
3.62
1'481.4
3.12
1'301.0
2.74
1'159.7
2.44
1'046.1
2.20
1'701.6
4.87
1'371.6
3.93
1'148.8
3.29
988.3
2.83
867.1
2.48
772.4
2.21
2'252.1
5.68
1'815.3
4.58
1'520.4
3.84
1'308.0
3.30
1'147.6
2.90
1'022.3
2.58
2'999.4
6.63
2'417.7
5.35
2'025.0
4.48
1'742.0
3.85
1'528.4
3.38
1'361.5
3.01
1'227.5
2.71
3'800.8
7.58
3'063.7
6.11
2'566.0
5.12
2'207.5
4.40
1'936.8
3.86
1'725.3
3.44
1'555.4
3.10
2'747.5
6.98
2'211.4
5.62
1'850.3
4.70
1'590.6
4.04
1'394.9
3.54
1'242.0
3.16
1'119.3
2.84
4'216.2
8.84
3'393.5
7.11
2'839.5
5.95
2'441.0
5.12
2'140.5
4.49
1'906.0
3.99
1'717.7
3.60
1'563.3
3.28
Ndmin
v
(Concrete/Steel) xyd ab
[kN]
[kN]
151
99
228
149
554
477
353
766
659
488
987
849
629
1'236
1'081
858
708
1'614
1'412
1'120
925
2'007
1'756
1'392
1'150
2'411
2'109
1'673
1'382
2'337
2'321
2'051
1'697
1'445
3'151
3'130
3'109
2'577
2'193
3'176
2'817
2'234
1'846
4'221
3'872
3'071
2'537
5'079
4'971
3'943
3'258
4'458
4'426
4'007
3'315
2'820
5'668
5'632
5'516
4'698
4'085
(38 / 38)
(38 / 38)
(52 / 52)
(51 / 51)
(80 / 80)
(80 / 80)
(79 / 79)
(101 / 101)
(100 / 100)
(99 / 99)
(122 / 122)
(121 / 121)
(119 / 119)
(136 / 136)
(135 / 135)
(134 / 134)
(133 / 133)
(164 / 164)
(163 / 163)
(162 / 162)
(160 / 160)
(193 / 193)
(191 / 191)
(189 / 189)
(188 / 188)
(221 / 221)
(219 / 219)
(217 / 217)
(215 / 215)
(208 / 208)
(207 / 207)
(205 / 205)
(204 / 204)
(203 / 203)
(279 / 279)
(278 / 278)
(276 / 276)
(274 / 274)
(272 / 272)
(335 / 335)
(333 / 333)
(330 / 330)
(327 / 327)
(421 / 421)
(417 / 417)
(414 / 414)
(410 / 410)
(506 / 506)
(502 / 502)
(498 / 498)
(494 / 494)
(444 / 444)
(441 / 441)
(438 / 438)
(435 / 435)
(432 / 432)
(565 / 565)
(561 / 561)
(558 / 558)
(554 / 554)
(551 / 551)
[mm] [%]
3.2
4.8
3.2
4.8
3.2
4.8
6.4
3.2
4.8
6.4
3.2
4.8
6.4
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
4.8
6.4
8.0
9.6
11.2
4.8
6.4
8.0
9.6
11.2
7.2
9.6
12.0
14.4
7.2
9.6
12.0
14.4
7.2
9.6
12.0
14.4
7.2
9.6
12.0
14.4
16.8
9.6
12.0
14.4
16.8
19.2
1.3
5.5
0.8
3.5
0.0
0.7
3.0
0.0
0.6
2.1
0.0
0.4
1.6
0.0
0.6
1.8
3.1
0.0
0.4
1.4
2.4
0.0
0.3
1.1
1.8
0.0
0.3
0.8
1.6
0.0
0.0
0.4
1.3
2.1
0.1
0.1
0.3
0.8
1.4
0.0
0.4
1.6
2.7
0.0
0.3
1.1
2.0
0.1
0.1
0.8
1.4
0.1
0.3
0.7
1.6
2.4
0.4
0.6
0.7
1.4
2.1
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
ab
Nd
[kN]
[kN]
[mm]
[%]
[kN]
[kN]
143
91
216
137
511
452
328
707
624
454
911
804
584
1'136
1'025
802
652
1'484
1'339
1'047
852
1'845
1'665
1'302
1'059
2'216
2'000
1'564
1'273
2'166
2'128
1'946
1'592
1'340
3'055
3'002
2'949
2'417
2'034
2'920
2'673
2'091
1'702
4'014
3'674
2'873
2'340
4'887
4'718
3'690
3'004
4'314
4'234
3'788
3'096
2'602
5'454
5'365
5'201
4'383
3'769
(36 / 36)
(35 / 35)
(49 / 49)
(47 / 47)
(78 / 78)
(75 / 75)
(73 / 73)
(98 / 98)
(95 / 95)
(92 / 92)
(118 / 118)
(114 / 114)
(111 / 111)
(131 / 131)
(128 / 128)
(125 / 125)
(122 / 122)
(158 / 158)
(155 / 155)
(151 / 151)
(148 / 148)
(185 / 185)
(181 / 181)
(177 / 177)
(173 / 173)
(212 / 212)
(207 / 207)
(203 / 203)
(198 / 198)
(202 / 202)
(198 / 198)
(195 / 195)
(191 / 191)
(188 / 188)
(271 / 271)
(266 / 266)
(262 / 262)
(257 / 257)
(252 / 252)
(323 / 323)
(316 / 316)
(309 / 309)
(302 / 302)
(405 / 405)
(396 / 396)
(387 / 387)
(378 / 378)
(487 / 487)
(476 / 476)
(466 / 466)
(455 / 455)
(430 / 430)
(422 / 422)
(414 / 414)
(406 / 406)
(398 / 398)
(544 / 544)
(535 / 535)
(526 / 526)
(517 / 517)
(508 / 508)
8.0
12.0
8.0
12.0
8.0
12.0
16.0
8.0
12.0
16.0
8.0
12.0
16.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
12.0
16.0
20.0
24.0
28.0
12.0
16.0
20.0
24.0
28.0
18.0
24.0
30.0
36.0
18.0
24.0
30.0
36.0
18.0
24.0
30.0
36.0
18.0
24.0
30.0
36.0
42.0
24.0
30.0
36.0
42.0
48.0
0.8
4.9
0.6
3.1
0.0
0.4
2.5
0.0
0.3
1.8
0.0
0.3
1.4
0.0
0.3
1.6
2.8
0.0
0.3
1.1
2.1
0.0
0.1
1.0
1.7
0.0
0.1
0.7
1.4
0.0
0.0
0.3
1.0
1.8
0.0
0.1
0.1
0.7
1.3
0.0
0.3
1.3
2.4
0.0
0.1
1.0
1.7
0.0
0.1
0.7
1.3
0.0
0.0
0.4
1.3
2.1
0.3
0.4
0.6
1.3
2.0
129
77
195
116
444
410
286
613
566
396
790
730
510
979
932
708
559
1'278
1'217
925
730
1'589
1'513
1'150
908
1'909
1'818
1'382
1'091
1'895
1'825
1'756
1'417
1'164
2'876
2'771
2'665
2'151
1'767
2'519
2'400
1'851
1'463
3'462
3'299
2'544
2'010
4'445
4'236
3'267
2'582
3'911
3'758
3'424
2'732
2'238
5'099
4'921
4'675
3'857
3'243
(34 / 68)
(34 / 68)
(45 / 90)
(45 / 90)
(73 / 135)
(68 / 135)
(68 / 135)
(92 / 169)
(86 / 169)
(85 / 169)
(111 / 203)
(104 / 203)
(102 / 203)
(122 / 225)
(117 / 225)
(113 / 225)
(113 / 225)
(148 / 270)
(141 / 270)
(135 / 270)
(135 / 270)
(173 / 315)
(165 / 315)
(158 / 315)
(158 / 315)
(198 / 360)
(189 / 360)
(180 / 360)
(180 / 360)
(191 / 338)
(184 / 338)
(177 / 338)
(170 / 338)
(169 / 338)
(257 / 450)
(247 / 450)
(238 / 450)
(229 / 450)
(225 / 450)
(302 / 540)
(287 / 540)
(273 / 540)
(270 / 540)
(378 / 675)
(361 / 675)
(343 / 675)
(338 / 675)
(455 / 810)
(434 / 810)
(413 / 810)
(405 / 810)
(406 / 709)
(390 / 709)
(374 / 709)
(359 / 709)
(355 / 709)
(508 / 900)
(491 / 900)
(473 / 900)
(455 / 900)
(450 / 900)
ab
Bearing dimensions/Parameters
a
Te
0.3
4.1
0.1
2.5
0.0
0.0
2.0
0.0
0.0
1.4
0.0
0.0
1.0
0.0
0.0
1.1
2.3
0.0
0.0
0.8
1.7
0.0
0.0
0.7
1.3
0.0
0.0
0.6
1.1
0.0
0.0
0.0
0.7
1.4
0.0
0.0
0.0
0.4
1.0
0.0
0.0
0.8
2.0
0.0
0.0
0.6
1.4
0.0
0.0
0.4
1.0
0.0
0.0
0.1
0.8
1.7
0.1
0.1
0.3
0.8
1.6
100
100
100
100
150
150
150
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
300
300
300
300
300
300
300
300
300
300
300
300
350
350
350
350
350
400
400
400
400
400
150
150
200
200
200
200
200
250
250
250
300
300
300
250
250
250
250
300
300
300
300
350
350
350
350
400
400
400
400
300
300
300
300
300
400
400
400
400
400
400
400
400
400
500
500
500
500
600
600
600
600
450
450
450
450
450
500
500
500
500
500
39
50
39
50
39
50
61
39
50
61
39
50
61
50
61
72
83
50
61
72
83
50
61
72
83
50
61
72
83
50
61
72
83
94
50
61
72
83
94
64
80
96
112
64
80
96
112
64
80
96
112
64
80
96
112
128
80
96
112
128
144
16
24
16
24
16
24
32
16
24
32
16
24
32
24
32
40
48
24
32
40
48
24
32
40
48
24
32
40
48
24
32
40
48
56
24
32
40
48
56
36
48
60
72
36
48
60
72
36
48
60
72
36
48
60
72
84
48
60
72
84
96
Weight
[kg]
3.6
4.1
4.8
5.5
7.4
8.4
9.4
9.3
10.6
11.8
11.3
12.7
14.2
14.2
15.9
17.5
19.2
17.2
19.2
21.1
23.1
20.1
22.4
24.7
27.1
23.0
25.7
28.3
31.0
21.6
24.1
26.6
29.1
31.6
28.9
32.3
35.6
39.0
42.3
43.1
48.7
54.2
59.8
54.0
61.0
68.0
75.0
65.0
73.4
81.8
90.1
56.8
64.2
71.5
78.8
86.2
81.8
91.1
100.4
109.8
119.1
Kz
Kxy
[kN/mm] [kN/mm]
43.5
29.0
72.6
48.4
188.5
125.7
94.3
282.5
188.3
141.2
384.9
256.6
192.5
354.4
265.8
212.6
177.2
492.8
369.6
295.7
246.4
641.9
481.4
385.1
321.0
799.0
599.2
479.4
399.5
785.4
589.1
471.3
392.7
336.6
1'299.8
974.9
779.9
649.9
557.1
627.0
470.3
376.2
313.5
925.5
694.1
555.3
462.8
1'248.1
936.1
748.8
624.0
1'064.9
798.7
638.9
532.5
456.4
1'259.9
1'007.9
839.9
720.0
630.0
0.84
0.56
1.12
0.75
1.69
1.12
0.84
2.11
1.41
1.05
2.53
1.69
1.27
1.88
1.41
1.12
0.94
2.25
1.69
1.35
1.12
2.62
1.97
1.58
1.31
3.00
2.25
1.80
1.50
2.81
2.11
1.69
1.41
1.21
3.75
2.81
2.25
1.88
1.61
3.00
2.25
1.80
1.50
3.75
2.81
2.25
1.88
4.50
3.38
2.70
2.25
3.94
2.95
2.36
1.97
1.69
3.75
3.00
2.50
2.14
1.88
Ndmin
v
(Concrete/Steel) xyd ab
[kN]
[kN]
6'820
6'777
6'734
6'111
5'313
7'712
7'669
7'626
7'583
7'290
6'443
8'604
8'561
8'518
8'475
8'432
8'390
7'630
9'684
9'631
9'577
9'524
8'606
7'607
11'320
11'258
11'195
11'133
10'844
9'584
13'275
13'212
13'150
13'087
13'025
12'962
12'814
15'193
15'122
15'050
14'979
14'907
14'835
14'764
13'887
13'815
13'744
13'672
13'601
13'529
13'457
17'656
17'575
17'495
17'414
17'333
17'253
17172
17'092
(680 / 680)
(675 / 675)
(671 / 671)
(667 / 667)
(663 / 663)
(768 / 768)
(764 / 764)
(760 / 760)
(756 / 756)
(751 / 751)
(747 / 747)
(857 / 857)
(853 / 853)
(849 / 849)
(844 / 844)
(840 / 840)
(836 / 836)
(832 / 832)
(1029 / 1029)
(1023 / 1023)
(1018 / 1018)
(1012 / 1012)
(1006 / 1006)
(1001 / 1001)
(1203 / 1203)
(1196 / 1196)
(1190 / 1190)
(1183 / 1183)
(1176 / 1176)
(1170 / 1170)
(1411 / 1411)
(1404 / 1404)
(1397 / 1397)
(1391 / 1391)
(1384 / 1384)
(1377 / 1377)
(1371 / 1371)
(1614 / 1614)
(1607 / 1607)
(1599 / 1599)
(1591 / 1591)
(1584 / 1584)
(1576 / 1576)
(1569 / 1569)
(1844 / 1844)
(1835 / 1835)
(1825 / 1825)
(1816 / 1816)
(1806 / 1806)
(1797 / 1797)
(1787 / 1787)
(2345 / 2345)
(2334 / 2334)
(2323 / 2323)
(2313 / 2313)
(2302 / 2302)
(2291 / 2291)
(2280 / 2280)
(2270 / 2270)
[mm] [%]
9.6
12.0
14.4
16.8
19.2
9.6
12.0
14.4
16.8
19.2
21.6
9.6
12.0
14.4
16.8
19.2
21.6
24.0
12.8
16.0
19.2
22.4
25.6
28.8
12.8
16.0
19.2
22.4
25.6
28.8
12.8
16.0
19.2
22.4
25.6
28.8
32.0
12.8
16.0
19.2
22.4
25.6
28.8
32.0
16.0
20.0
24.0
28.0
32.0
36.0
40.0
16.0
20.0
24.0
28.0
32.0
36.0
40.0
44.0
0.4
0.6
0.7
1.1
1.7
0.6
0.7
0.8
1.0
1.3
1.7
0.6
0.7
0.8
1.0
1.3
1.4
1.8
0.6
0.8
1.0
1.1
1.7
2.4
0.7
0.8
1.0
1.1
1.4
2.0
0.7
0.8
1.0
1.3
1.4
1.6
1.8
0.7
0.8
1.0
1.1
1.4
1.6
1.7
1.0
1.3
1.6
1.8
2.1
2.4
2.7
0.8
1.1
1.4
1.6
1.8
2.1
2.3
2.5
Ndmin
v
(Concrete/Steel) xyd
Ndmin
v
(Concrete/Steel) xyd
Nd
[kN]
6'563
6'456
6'349
5'700
4'902
7'455
7'348
7'241
7'134
6'794
5'947
8'347
8'240
8'133
8'026
7'919
7'812
7'043
9'363
9'230
9'096
8'962
8'023
7'023
10'945
10'789
10'632
10'476
10'109
8'849
12'900
12'743
12'587
12'431
12'274
12'118
11'882
14'764
14'585
14'406
14'227
14'048
13'869
13'690
13'457
13'278
13'099
12'921
12'742
12'563
12'384
17'172
16'971
16'769
16'568
16'366
16'164
15'963
15'761
[kN]
ab
[mm] [%]
Nd
[kN]
[kN]
ab
Bearing dimensions/Parameters
a
Te
(654 / 654)
24.0 0.4 6'135 (611 / 1080) 48.0 0.3
(643 / 643)
30.0 0.4 5'921 (590 / 1080) 60.0 0.3
(633 / 633)
36.0 0.6 5'707 (569 / 1080) 72.0 0.4
(622 / 622)
42.0 1.0 5'016 (548 / 1080) 84.0 0.7
(611 / 611)
48.0 1.6 4'218 (540 / 1080) 96.0 1.1
(743 / 743)
24.0 0.4 7'027 (700 / 1215) 48.0 0.3
(732 / 732)
30.0 0.6 6'813 (679 / 1215) 60.0 0.4
(722 / 722)
36.0 0.7 6'599 (658 / 1215) 72.0 0.4
(711 / 711)
42.0 0.8 6'385 (636 / 1215) 84.0 0.6
(700 / 700)
48.0 1.1 5'966 (615 / 1215) 96.0 0.7
(690 / 690)
54.0 1.6 5'119 (608 / 1215) 108.0 1.3
(832 / 832)
24.0 0.4 7'919 (789 / 1350) 48.0 0.3
(821 / 821)
30.0 0.6 7'705 (768 / 1350) 60.0 0.4
(810 / 810)
36.0 0.7 7'491 (746 / 1350) 72.0 0.6
(800 / 800)
42.0 0.8 7'277 (725 / 1350) 84.0 0.7
(789 / 789)
48.0 1.0 7'063 (704 / 1350) 96.0 0.7
(778 / 778)
54.0 1.1 6'848 (682 / 1350) 108.0 0.8
(768 / 768)
60.0 1.6 6'065 (675 / 1350) 120.0 1.3
(995 / 995)
32.0 0.6 8'828 (938 / 1620) 64.0 0.3
(981 / 981)
40.0 0.7 8'561 (910 / 1620) 80.0 0.4
(967 / 967)
48.0 0.8 8'293 (881 / 1620) 96.0 0.4
(952 / 952)
56.0 1.0 8'026 (853 / 1620) 112.0 0.6
(938 / 938)
64.0 1.4 7'050 (825 / 1620) 128.0 1.1
(924 / 924)
72.0 2.1 6'051 (810 / 1620) 144.0 1.7
(1163 / 1163) 32.0 0.6 10'320 (1097 / 1890) 64.0 0.4
(1146 / 1146) 40.0 0.7 10'007 (1063 / 1890) 80.0 0.4
(1130 / 1130) 48.0 0.8 9'694 (1030 / 1890) 96.0 0.6
(1113 / 1113) 56.0 1.0 9'381 (997 / 1890) 112.0 0.7
(1097 / 1097) 64.0 1.3 8'883 (964 / 1890) 128.0 0.8
(1080 / 1080) 72.0 1.8 7'624 (945 / 1890) 144.0 1.4
(1371 / 1371) 32.0 0.6 12'274 (1304 / 2205) 64.0 0.4
(1354 / 1354) 40.0 0.7 11'961 (1271 / 2205) 80.0 0.6
(1337 / 1337) 48.0 0.8 11'649 (1238 / 2205) 96.0 0.7
(1321 / 1321) 56.0 1.1 11'336 (1205 / 2205) 112.0 0.8
(1304 / 1304) 64.0 1.3 11'023 (1171 / 2205) 128.0 1.0
(1288 / 1288) 72.0 1.4 10'711 (1138 / 2205) 144.0 1.0
(1271 / 1271) 80.0 1.6 10'329 (1105 / 2205) 160.0 1.1
(1569 / 1569) 32.0 0.6 14'048 (1493 / 2520) 64.0 0.4
(1550 / 1550) 40.0 0.7 13'690 (1455 / 2520) 80.0 0.6
(1531 / 1531) 48.0 0.8 13'332 (1417 / 2520) 96.0 0.7
(1512 / 1512) 56.0 1.0 12'974 (1379 / 2520) 112.0 0.8
(1493 / 1493) 64.0 1.1 12'616 (1341 / 2520) 128.0 1.0
(1474 / 1474) 72.0 1.4 12'258 (1303 / 2520) 144.0 1.1
(1455 / 1455) 80.0 1.6 11'900 (1265 / 2520) 160.0 1.1
(1787 / 1787) 40.0 0.8 12'742 (1692 / 2880) 80.0 0.7
(1763 / 1763) 50.0 1.1 12'384 (1645 / 2880) 100.0 1.0
(1740 / 1740) 60.0 1.4 12'026 (1597 / 2880) 120.0 1.1
(1716 / 1716) 70.0 1.7 11'668 (1550 / 2880) 140.0 1.3
(1692 / 1692) 80.0 1.8 11'310 (1502 / 2880) 160.0 1.6
(1668 / 1668) 90.0 2.1 10'952 (1455 / 2880) 180.0 1.7
(1645 / 1645) 100.0 2.4 10'594 (1440 / 2880) 200.0 2.0
(2280 / 2280) 40.0 0.8 16'366 (2173 / 3645) 80.0 0.7
(2254 / 2254) 50.0 1.0 15'963 (2120 / 3645) 100.0 0.8
(2227 / 2227) 60.0 1.3 15'560 (2066 / 3645) 120.0 1.0
(2200 / 2200) 70.0 1.4 15'157 (2013 / 3645) 140.0 1.3
(2173 / 2173) 80.0 1.7 14'754 (1959 / 3645) 160.0 1.4
(2147 / 2147) 90.0 2.0 14'350 (1906 / 3645) 180.0 1.6
(2120 / 2120) 100.0 2.1 13'947 (1852 / 3645) 200.0 1.8
(2093 / 2093) 110.0 2.3 13'544 (1823 / 3645) 220.0 2.0
400
400
400
400
400
450
450
450
450
450
450
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
700
700
700
700
700
700
700
700
800
800
800
800
800
800
800
900
900
900
900
900
900
900
900
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
700
700
700
700
700
700
700
800
800
800
800
800
800
800
800
800
800
800
800
800
800
900
900
900
900
900
900
900
900
80
96
112
128
144
80
96
112
128
144
160
80
96
112
128
144
160
176
99
120
141
162
183
204
99
120
141
162
183
204
99
120
141
162
183
204
225
99
120
141
162
183
204
225
115
140
165
190
215
240
265
115
140
165
190
215
240
265
290
48
60
72
84
96
48
60
72
84
96
108
48
60
72
84
96
108
120
64
80
96
112
128
144
64
80
96
112
128
144
64
80
96
112
128
144
160
64
80
96
112
128
144
160
80
100
120
140
160
180
200
80
100
120
140
160
180
200
220
Weight
[kg]
98.3
109.5
120.8
132.0
143.2
110.8
123.4
136.1
148.7
161.3
174.0
123.3
137.3
151.4
165.4
179.5
193.5
207.6
164.3
185.9
207.5
229.1
250.7
272.3
191.9
217.2
242.4
267.6
292.8
318.0
224.2
253.7
283.1
312.6
342.1
371.5
401.0
256.5
290.2
323.9
357.6
391.3
425.0
458.7
307.3
349.3
391.3
433.3
475.2
517.2
559.2
389.5
442.7
495.9
549.1
602.3
655.5
708.7
761.9
Kz
Kxy
[kN/mm] [kN/mm]
1'725.8
1'380.7
1'150.6
986.2
862.9
2'181.6
1'745.3
1'454.4
1'246.6
1'090.8
969.6
2'669.7
2'135.7
1'779.8
1'525.5
1'334.8
1'186.5
1'067.9
1'768.1
1'414.4
1'178.7
1'010.3
884.0
785.8
2'340.0
1'872.0
1'560.0
1'337.2
1'170.0
1'040.0
3'116.6
2'493.3
2'077.7
1'780.9
1'558.3
1'385.1
1'246.6
3'949.3
3'159.4
2'632.9
2'256.7
1'974.6
1'755.2
1'579.7
2'833.3
2'266.7
1'888.9
1'619.1
1'416.7
1'259.3
1'133.3
4'348.0
3'478.4
2'898.6
2'484.6
2'174.0
1'932.4
1'739.2
1'581.1
4.50
3.60
3.00
2.57
2.25
5.06
4.05
3.38
2.89
2.53
2.25
5.62
4.50
3.75
3.21
2.81
2.50
2.25
5.06
4.05
3.38
2.89
2.53
2.25
5.91
4.72
3.94
3.38
2.95
2.62
6.89
5.51
4.59
3.94
3.45
3.06
2.76
7.88
6.30
5.25
4.50
3.94
3.50
3.15
7.20
5.76
4.80
4.11
3.60
3.20
2.88
9.11
7.29
6.08
5.21
4.56
4.05
3.64
3.31
Type B elastomeric bearings are enclosed on all sides with rubber (NR/CR)
and are used between concrete or steel construction components. This type
of bearing can simply be positioned between the structural components.
Ndmin
v
(Concrete/Steel) xyd ab
[kN]
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
[kN]
[mm]
ab
Nd
[%]
[kN]
Ndmin
v
(Concrete/Steel) xyd
[kN]
ab
[mm] [%]
Bearing dimensions/Parameters
d
Te
Weight
[mm]
[mm]
[mm]
[kg]
Kz
Kxy
[kN/mm] [kN/mm]
693
(85 / 85)
4.2 0.0
640
(83 / 83)
10.5
0.0
556
(78 / 142)
21.0 0.0
200
30
21
3.0
206.6
1.35
669
(85 / 85)
5.8 0.0
626
(81 / 81)
14.5
0.0
530
(74 / 142)
29.0 0.0
200
41
29
4.0
149.6
0.97
7.4 1.6
488
520
(84 / 84)
(79 / 79)
18.5
1.3
436
(71 / 142)
37.0 0.7
200
52
37
5.0
117.3
0.76
1'394
(136 / 136)
(133 / 133)
10.5
0.0
1'143
(127 / 221)
21.0 0.0
250
30
21
4.7
499.4
2.10
1'385
(135 / 135)
(130 / 130)
14.5
0.0
1'102
(122 / 221)
29.0 0.0
250
41
29
6.3
361.7
1.52
1'323
(134 / 134)
(128 / 128)
18.5
0.0
1'060
(117 / 221)
37.0 0.0
250
52
37
7.9
283.5
1.19
2'224
(197 / 197)
(191 / 191)
14.5
0.0
1'981
(181 / 319)
29.0 0.0
300
41
29
9.1
728.7
2.19
2'212
(196 / 196)
(189 / 189)
18.5
0.0
1'921
(176 / 319)
37.0 0.0
300
52
37
11.5
571.2
1.72
2'199
(195 / 195)
(186 / 186)
22.5
0.1
1'860
(170 / 319)
45.0 0.0
300
63
45
13.8
469.6
1.41
1'946
(194 / 194)
(183 / 183)
26.5
0.6
1'653
(165 / 319)
53.0 0.3
300
74
53
16.2
398.7
1.20
3'060
(271 / 271)
(264 / 264)
14.5
0.3
2'849
(253 / 433)
29.0 0.1
350
41
29
12.5
1'295.3
2.99
2.34
3'046
(270 / 270)
(261 / 261)
18.5
0.3
2'776
(246 / 433)
37.0 0.1
350
52
37
15.7
1'015.2
3'031
(269 / 269)
(258 / 258)
22.5
0.4
2'703
(240 / 433)
45.0 0.1
350
63
45
18.9
834.8
1.92
3'017
(268 / 268)
(255 / 255)
26.5
0.6
2'631
(233 / 433)
53.0 0.3
350
74
53
22.2
708.8
1.63
3'002
(266 / 266)
(252 / 252)
30.5
0.6
2'558
(227 / 433)
61.0 0.3
350
85
61
25.4
615.8
1.42
3'560
(355 / 355)
(344 / 344)
20.5
0.0
3'177
(325 / 566)
41.0 0.0
400
57
41
22.2
768.2
2.76
3'537
(353 / 353)
(338 / 338)
26.5
0.1
3'068
(314 / 566)
53.0 0.0
400
73
53
28.1
594.3
2.13
3'448
(351 / 351)
(333 / 333)
32.5
0.3
2'959
(303 / 566)
65.0 0.0
400
89
65
33.9
484.5
1.74
2'892
(348 / 348)
(327 / 327)
38.5
1.0
2'419
(291 / 566)
77.0 0.7
400
105
77
39.8
409.0
1.47
4'537
(452 / 452)
(439 / 439)
20.5
0.3
4'194
(418 / 716)
41.0 0.1
450
57
41
28.2
1'199.2
3.49
4'511
(450 / 450)
(433 / 433)
26.5
0.4
4'068
(406 / 716)
53.0 0.1
450
73
53
35.6
927.7
2.70
4'486
(447 / 447)
(427 / 427)
32.5
0.4
3'942
(393 / 716)
65.0 0.3
450
89
65
43.0
756.4
2.20
4'461
(445 / 445)
(421 / 421)
38.5
0.6
3'817
(381 / 716)
77.0 0.3
450
105
77
50.5
638.5
1.86
5'632
(561 / 561)
(547 / 547)
20.5
0.3
5'250
(523 / 884)
41.0 0.1
500
57
41
34.9
1'773.1
4.31
5'604
(559 / 559)
(540 / 540)
26.5
0.4
5'110
(509 / 884)
53.0 0.3
500
73
53
44.1
1'371.7
3.33
5'576
(556 / 556)
(533 / 533)
32.5
0.6
4'971
(495 / 884)
65.0 0.4
500
89
65
53.2
1'118.4
2.72
5'548
(553 / 553)
(526 / 526)
38.5
0.7
4'831
(482 / 884)
77.0 0.4
500
105
77
62.4
944.1
2.29
5'520
(550 / 550)
(519 / 519)
44.5
0.8
4'691
(468 / 884)
89.0 0.6
500
121
89
71.6
816.8
1.99
6'815
(679 / 679)
(659 / 659)
26.5
0.6
6'271
(625 / 1070)
53.0 0.4
550
73
53
53.4
1'940.9
4.03
6'784
(676 / 676)
(651 / 651)
32.5
0.7
6'117
(610 / 1070)
65.0 0.4
550
89
65
64.5
1'582.6
3.29
6'753
(673 / 673)
(643 / 643)
38.5
0.8
5'963
(594 / 1070)
77.0 0.6
550
105
77
75.7
1'336.0
2.78
6'722
(670 / 670)
(636 / 636)
44.5
1.0
5'809
(579 / 1070)
89.0 0.7
550
121
89
86.8
1'155.8
2.40
6'692
(667 / 667)
(628 / 628)
50.5
1.1
5'655
(564 / 1070)
101.0 0.8
550
137
101
97.9
1'018.5
2.12
8'144
(811 / 811)
(789 / 789)
26.5
0.6
7'550
(752 / 1273)
53.0 0.4
600
73
53
63.6
2'648.5
4.80
8'110
(808 / 808)
(781 / 781)
32.5
0.7
7'382
(736 / 1273)
65.0 0.4
600
89
65
76.9
2'159.5
3.91
8'077
(805 / 805)
(773 / 773)
38.5
0.8
7'214
(719 / 1273)
77.0 0.6
600
105
77
90.2
1'823.0
3.30
8'043
(801 / 801)
(764 / 764)
44.5
1.0
7'046
(702 / 1273)
89.0 0.7
600
121
89
103.4
1'577.2
2.86
8'009
(798 / 798)
(756 / 756)
50.5
1.1
6'878
(685 / 1273)
101.0 0.8
600
137
101
116.7
1'389.8
2.52
7'976
(795 / 795)
(747 / 747)
56.5
1.1
6'709
(669 / 1273)
113.0 1.0
600
153
113
130.0
1'242.2
2.25
9'591
(956 / 956)
(932 / 932)
26.5
0.4
8'947
(891 / 1494)
53.0 0.4
650
73
53
74.8
3'505.7
5.63
9'555
(952 / 952)
(922 / 922)
32.5
0.6
8'765
(873 / 1494)
65.0 0.4
650
89
65
90.4
2'858.5
4.59
Type B elastomeric bearings are enclosed on all sides with rubber (NR/CR)
and are used between concrete or steel construction components. This type
of bearing can simply be positioned between the structural components.
Ndmin
v
(Concrete/Steel) xyd ab
[kN]
[kN]
9'518
(948 / 948)
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
ab
Ndmin
v
(Concrete/Steel) xyd
ab
Bearing dimensions/Parameters
d
Te
Weight
Kz
Kxy
[kN]
[mm]
[%]
[kN]
[kN]
[mm] [%]
[mm]
[mm]
[mm]
[kg]
(913 / 913)
38.5
0.7
8'583
(855 / 1494)
77.0 0.6
650
105
77
106.0
[kN/mm] [kN/mm]
2'413.0
3.88
9'482
(945 / 945)
(904 / 904)
44.5
0.8
8'400
(837 / 1494)
89.0 0.7
650
121
89
121.5
2'087.7
3.36
9'446
(941 / 941)
(895 / 895)
50.5
1.0
8'218
(819 / 1494)
101.0 0.8
650
137
101
137.1
1'839.7
2.96
9'409
(937 / 937)
(886 / 886)
56.5
1.1
8'036
(801 / 1494)
113.0 1.0
650
153
113
152.7
1'644.3
2.64
9'373
(934 / 934)
(877 / 877)
62.5
1.3
7'853
(783 / 1494)
125.0 1.0
650
169
125
168.3
1'486.4
2.39
34.5
0.6
9'563
(1016 / 1732)
69.0 0.4
700
94
69
110.0
2'270.4
5.02
(1060 / 1060)
42.5
0.7
9'318
(990 / 1732)
85.0 0.6
700
115
85
133.1
1'843.0
4.07
(1046 / 1046)
50.5
0.8
9'072
(964 / 1732)
101.0 0.7
700
136
101
156.2
1'551.1
3.43
(1033 / 1033)
58.5
1.1
8'826
(938 / 1732)
117.0 0.8
700
157
117
179.4
1'338.9
2.96
(1020 / 1020)
66.5
1.3
8'581
(912 / 1732)
133.0 1.0
700
178
133
202.5
1'177.9
2.60
(1007 / 1007)
74.5
1.4
8'335
(886 / 1732)
149.0 1.0
700
199
149
225.6
1'051.4
2.32
34.5
69.0 0.4
750
94
69
126.3
2'910.4
5.76
42.5
85.0 0.6
750
115
85
152.9
2'362.6
4.68
50.5
750
136
101
179.5
1'988.3
3.94
58.5
750
157
117
206.1
1'716.4
3.40
66.5
750
178
133
232.6
1'509.9
2.99
74.5
1.4
750
199
149
259.2
1'347.8
2.67
34.5
69.0 0.4
800
94
69
143.8
3'659.4
6.56
9'760
42.5
85.0 0.6
800
115
85
174.1
2'970.6
5.32
50.5
800
136
101
204.4
2'500.0
4.48
58.5
800
157
117
234.6
2'158.1
3.87
66.5
800
178
133
264.9
1'898.5
3.40
74.5
800
199
149
295.2
1'694.6
3.04
82.5
800
220
165
325.4
1'530.3
2.74
34.5
69.0 0.4
850
94
69
162.5
4'523.8
7.40
42.5
85.0 0.6
850
115
85
196.7
3'672.2
6.01
50.5
850
136
101
230.9
3'090.5
5.06
58.5
850
157
117
265.0
2'667.9
4.37
66.5
850
178
133
299.2
2'346.9
3.84
74.5
850
199
149
333.4
2'094.9
3.43
82.5
850
220
165
367.6
1'891.8
3.10
42.5
85.0 0.7
900
110
85
196.0
3'214.0
6.74
52.5
900
135
105
237.8
2'601.8
5.45
62.5
900
160
125
279.6
2'185.5
4.58
72.5
900
185
145
321.4
1'884.1
3.95
82.5
900
210
165
363.1
1'655.7
3.47
92.5
900
235
185
404.9
1'476.7
3.09
900
260
205
446.7
1'332.6
2.79
If the minimum vertical loads indicated in the following tables (see pages 621) are not achieved, the elastomeric pad must be anchored to prevent
displacement. This anchoring can be achieved by means of shear lugs or
bolts, both of which can be fastened to the steel exterior of the elastomeric
bearing.
Ndmin
v
ab
(Concrete/Steel) xyd
[kN]
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
[kN]
[mm]
ab
Nd
[%]
[kN]
Ndmin
v
(Concrete/Steel) xyd
[kN]
ab
[mm] [%]
Bearing dimensions/Parameters
d
Te
Weight
[mm]
[mm]
[mm]
[kg]
Kz
Kxy
[kN/mm] [kN/mm]
696
(86 / 86)
3.2
0.0
649
(84 / 84)
8.0
0.0
573
(80 / 142)
16.0
0.0
200
49
16
8.3
271.2
1.77
691
(85 / 85)
4.8
0.0
635
(82 / 82)
12.0
0.0
547
(77 / 142)
24.0
0.0
200
60
24
9.3
180.8
1.18
604
(84 / 84)
6.4
0.7
573
(80 / 80)
16.0
0.4
521
(73 / 142)
32.0
0.0
200
71
32
10.4
135.6
0.88
1'400
(137 / 137)
3.2
0.0 1'311
(134 / 134)
8.0
0.0
1'169
(129 / 221)
16.0
0.0
250
49
16
13.1
655.5
2.76
1'391
(136 / 136)
4.8
0.0 1'289
(132 / 132)
12.0
0.0
1'128
(125 / 221)
24.0
0.0
250
60
24
14.7
437.0
1.84
1'381
(135 / 135)
6.4
0.0 1'266
(129 / 129)
16.0
0.0
1'086
(120 / 221)
32.0
0.0
250
71
32
16.4
327.8
1.38
2'232
(198 / 198)
4.8
0.1 2'176
(193 / 193)
12.0
0.0
2'019
(185 / 319)
24.0
0.0
300
60
24
21.4
880.5
2.65
1.99
2'220
(197 / 197)
6.4
0.1 2'145
(190 / 190)
16.0
0.0
1'958
(179 / 319)
32.0
0.0
300
71
32
23.8
660.4
2'207
(196 / 196)
8.0
0.3 2'114
(188 / 188)
20.0
0.1
1'898
(174 / 319)
40.0
0.0
300
82
40
26.1
528.3
1.59
2'157
(195 / 195)
9.6
0.4 2'047
(185 / 185)
24.0
0.1
1'838
(168 / 319)
48.0
0.0
300
93
48
28.5
440.3
1.33
3'069
(272 / 272)
4.8
0.3 3'004
(266 / 266)
12.0
0.1
2'895
(257 / 433)
24.0
0.1
350
60
24
29.3
1'565.2
3.61
2.71
3'055
(271 / 271)
6.4
0.4 2'967
(263 / 263)
16.0
0.3
2'822
(250 / 433)
32.0
0.1
350
71
32
32.5
1'173.9
3'040
(270 / 270)
8.0
0.6 2'931
(260 / 260)
20.0
0.4
2'749
(244 / 433)
40.0
0.1
350
82
40
35.7
939.1
2.16
3'026
(268 / 268)
9.6
0.6 2'895
(257 / 257)
24.0
0.4
2'676
(237 / 433)
48.0
0.3
350
93
48
38.9
782.6
1.80
1.55
3'011
(267 / 267)
(254 / 254)
28.0
0.6
2'603
(231 / 433)
56.0
0.3
350
104
56
42.2
670.8
3'569
(356 / 356)
7.2
0.1 3'469
(346 / 346)
18.0
0.0
3'222
(329 / 566)
36.0
0.0
400
80
36
48.1
874.9
3.14
3'547
(354 / 354)
9.6
0.3 3'413
(340 / 340)
24.0
0.1
3'113
(318 / 566)
48.0
0.0
400
96
48
53.9
656.2
2.36
3'524
(351 / 351)
(335 / 335)
30.0
0.1
3'005
(307 / 566)
60.0
0.0
400
112
60
59.8
524.9
1.88
3'101
(349 / 349)
(329 / 329)
36.0
0.7
2'628
(296 / 566)
72.0
0.4
400
128
72
65.6
437.4
1.57
4'547
(453 / 453)
7.2
0.3 4'434
(442 / 442)
18.0
0.3
4'246
(423 / 716)
36.0
0.1
450
80
36
61.1
1'365.8
3.98
4'522
(451 / 451)
9.6
0.4 4'371
(436 / 436)
24.0
0.4
4'120
(411 / 716)
48.0
0.1
450
96
48
68.5
1'024.3
2.98
4'497
(448 / 448)
(430 / 430)
30.0
0.4
3'995
(398 / 716)
60.0
0.3
450
112
60
75.9
819.5
2.39
4'472
(446 / 446)
(423 / 423)
36.0
0.6
3'869
(386 / 716)
72.0
0.3
450
128
72
83.3
682.9
1.99
5'644
(563 / 563)
7.2
0.4 5'518
(550 / 550)
18.0
0.3
5'308
(529 / 884)
36.0
0.1
500
80
36
75.6
2'019.4
4.91
5'616
(560 / 560)
9.6
0.6 5'448
(543 / 543)
24.0
0.4
5'169
(515 / 884)
48.0
0.3
500
96
48
84.8
1'514.6
3.68
5'588
(557 / 557)
(536 / 536)
30.0
0.6
5'029
(501 / 884)
60.0
0.4
500
112
60
93.9
1'211.6
2.95
5'560
(554 / 554)
(529 / 529)
36.0
0.7
4'889
(487 / 884)
72.0
0.4
500
128
72
103.1
1'009.7
2.45
5'532
(551 / 551)
(522 / 522)
42.0
0.8
4'749
(473 / 884)
84.0
0.6
500
144
84
112.3
865.5
2.10
6'828
(680 / 680)
9.6
0.6 6'643
(662 / 662)
24.0
0.6
6'335
(631 / 1070)
48.0
0.4
550
96
48
102.8
2'143.1
4.45
6'797
(677 / 677)
(654 / 654)
30.0
0.7
6'181
(616 / 1070)
60.0
0.4
550
112
60
113.9
1'714.5
3.56
6'766
(674 / 674)
(647 / 647)
36.0
0.8
6'027
(601 / 1070)
72.0
0.6
550
128
72
125.0
1'428.7
2.97
6'735
(671 / 671)
(639 / 639)
42.0
1.0
5'873
(585 / 1070)
84.0
0.7
550
144
84
136.2
1'224.6
2.55
6'704
(668 / 668)
(631 / 631)
48.0
1.1
5'720
(570 / 1070)
96.0
0.8
550
160
96
147.3
1'071.5
2.23
8'158
(813 / 813)
9.6
0.6 7'956
(793 / 793)
24.0
0.4
7'620
(759 / 1273)
48.0
0.4
600
96
48
122.5
2'924.4
5.30
8'124
(810 / 810)
(784 / 784)
30.0
0.6
7'452
(743 / 1273)
60.0
0.4
600
112
60
135.8
2'339.5
4.24
8'091
(806 / 806)
(776 / 776)
36.0
0.7
7'284
(726 / 1273)
72.0
0.6
600
128
72
149.1
1'949.6
3.53
8'057
(803 / 803)
(768 / 768)
42.0
0.8
7'116
(709 / 1273)
84.0
0.7
600
144
84
162.3
1'671.1
3.03
8'023
(799 / 799)
(759 / 759)
48.0
1.0
6'948
(692 / 1273)
96.0
0.8
600
160
96
175.6
1'462.2
2.65
7'990
(796 / 796)
(751 / 751)
54.0
1.1
6'780
(676 / 1273)
108.0 1.0
600
176
108
188.8
1'299.7
2.36
9'607
(957 / 957)
9.6
0.6 9'388
(935 / 935)
24.0
0.4
9'023
(899 / 1494)
48.0
0.4
650
96
48
144.0
3'870.9
6.22
9'570
(953 / 953)
(926 / 926)
30.0
0.6
8'841
(881 / 1494)
60.0
0.4
650
112
60
159.6
3'096.7
4.98
If the minimum vertical loads indicated in the following tables (see pages 621) are not achieved, the elastomeric pad must be anchored to prevent
displacement. This anchoring can be achieved by means of shear lugs or
bolts, both of which can be fastened to the steel exterior of the elastomeric
bearing.
Ndmin
v
ab
(Concrete/Steel) xyd
[kN]
[kN]
9'534
(950 / 950)
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
ab
Ndmin
v
(Concrete/Steel) xyd
[kN]
[mm]
[%]
[kN]
[kN]
(917 / 917)
36.0
0.7
8'659
(863 / 1494)
ab
Bearing dimensions/Parameters
d
Te
[mm] [%]
[mm]
[mm]
[mm]
[kg]
72.0
650
128
72
175.2
0.6
Weight
Kz
Kxy
[kN/mm] [kN/mm]
2'580.6
4.15
9'497
(946 / 946)
(908 / 908)
42.0
0.8
8'476
(845 / 1494)
84.0
0.7
650
144
84
190.8
2'212.0
3.56
9'461
(943 / 943)
(899 / 899)
48.0
1.0
8'294
(826 / 1494)
96.0
0.8
650
160
96
206.3
1'935.5
3.11
9'424
(939 / 939)
(890 / 890)
54.0
1.1
8'112
(808 / 1494)
108.0 1.0
650
176
108
221.9
1'720.4
2.77
9'388
(935 / 935)
(881 / 881)
60.0
1.3
7'929
(790 / 1494)
120.0 1.0
650
192
120
237.5
1'548.4
2.49
32.0
0.6
9'640
(1024 / 1732)
64.0
0.4
700
115
64
184.4
2'447.8
5.41
40.0
0.7
9'394
(998 / 1732)
80.0
0.6
700
136
80
207.6
1'958.2
4.33
(1051 / 1051)
48.0
0.8
9'149
(972 / 1732)
96.0
0.7
700
157
96
230.7
1'631.8
3.61
(1037 / 1037)
56.0
1.1
8'903
(946 / 1732)
112.0 0.8
700
178
112
253.8
1'398.7
3.09
(1024 / 1024)
64.0
1.3
8'658
(920 / 1732)
128.0 1.0
700
199
128
277.0
1'223.9
2.71
8'412
(894 / 1732)
(1011 / 1011)
72.0
1.4
144.0 1.0
700
220
144
300.1
1'087.9
2.41
32.0
64.0
0.4
750
115
64
211.9
3'137.8
6.21
40.0
80.0
0.6
750
136
80
238.5
2'510.2
4.97
48.0
96.0
0.7
750
157
96
265.1
2'091.9
4.14
56.0
750
178
112
291.7
1'793.0
3.55
64.0
750
199
128
318.2
1'568.9
3.11
72.0
1.4
750
220
144
344.8
1'394.6
2.76
32.0
64.0
0.4
800
115
64
241.4
3'945.3
7.07
40.0
80.0
0.6
800
136
80
271.6
3'156.3
5.65
96.0
9'843
48.0
0.7
800
157
96
301.9
2'630.2
4.71
56.0
800
178
112
332.1
2'254.5
4.04
64.0
800
199
128
362.4
1'972.7
3.53
72.0
800
220
144
392.7
1'753.5
3.14
80.0
800
241
160
422.9
1'578.1
2.83
32.0
64.0
0.4
850
115
64
272.7
4'877.2
7.98
40.0
80.0
0.6
850
136
80
306.9
3'901.8
6.38
48.0
96.0
0.7
850
157
96
341.0
3'251.5
5.32
56.0
850
178
112
375.2
2'787.0
4.56
64.0
850
199
128
409.4
2'438.6
3.99
72.0
850
220
144
443.6
2'167.6
3.55
80.0
850
241
160
477.8
1'950.9
3.19
40.0
0.7
900
131
80
319.7
3'414.9
7.16
80.0
50.0
900
156
100
361.4
2'731.9
5.73
60.0
900
181
120
403.2
2'276.6
4.77
70.0
900
206
140
445.0
1'951.4
4.09
80.0
900
231
160
486.8
1'707.4
3.58
90.0
900
256
180
528.6
1'517.7
3.18
13'487 (1791 / 1791) 40.0 2.4 12'537 (1665 / 1665) 100.0 2.1 10'954 (1455 / 2863) 200.0 1.8
900
281
200
570.3
1'366.0
2.86
Ndmin
v
ab
(Concrete/Steel) xyd
[kN]
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
[kN]
[mm]
ab
Nd
[%]
[kN]
Ndmin
v
(Concrete/Steel) xyd
[kN]
ab
[mm] [%]
Bearing dimensions/Parameters
d
Te
Weight
[mm]
[mm]
[mm]
[kg]
Kz
Kxy
[kN/mm] [kN/mm]
695
(86 / 86)
3.7
0.0
644
(83 / 83)
9.2
0.0
565
(79 / 142)
18.5
0.0
200
39.5
19
5.6
234.5
1.53
689
(85 / 85)
5.3
0.0
630
(81 / 81)
13.2
0.0
539
(75 / 142)
26.5
0.0
200
50.5
27
6.7
163.7
1.07
559
(84 / 84)
6.9
1.1
527
(80 / 80)
17.2
0.8
475
(72 / 142)
34.5
0.4
200
61.5
35
7.7
125.8
0.82
1'397
(136 / 136)
3.7
0.0 1'304
(133 / 133)
9.2
0.0
1'156
(128 / 221)
18.5
0.0
250
39.5
19
8.9
566.9
2.39
1'388
(135 / 135)
5.3
0.0 1'282
(131 / 131)
13.2
0.0
1'115
(123 / 221)
26.5
0.0
250
50.5
27
10.5
395.8
1.67
1'378
(135 / 135)
6.9
0.0 1'259
(129 / 129)
17.2
0.0
1'073
(119 / 221)
34.5
0.0
250
61.5
35
12.1
304.0
1.28
2'228
(198 / 198)
5.3
0.1 2'166
(192 / 192)
13.2
0.0
2'000
(183 / 319)
26.5
0.0
300
50.5
27
15.3
797.5
2.40
2'216
(197 / 197)
6.9
0.1 2'135
(190 / 190)
17.2
0.0
1'939
(178 / 319)
34.5
0.0
300
61.5
35
17.6
612.5
1.84
2'203
(196 / 196)
8.5
0.3 2'104
(187 / 187)
21.2
0.1
1'879
(172 / 319)
42.5
0.0
300
72.5
43
20.0
497.2
1.50
2'046
(194 / 194)
(184 / 184)
25.2
0.4
1'753
(167 / 319)
50.5
0.0
300
83.5
51
22.3
418.5
1.26
3'065
(272 / 272)
5.3
(265 / 265)
13.2
0.3
2'872
(255 / 433)
26.5
0.1
350
50.5
27
20.9
1'417.5
3.27
0.3 2'993
3'050
(271 / 271)
6.9
0.4 2'956
(262 / 262)
17.2
0.3
2'799
(248 / 433)
34.5
0.1
350
61.5
35
24.1
1'088.8
2.51
3'036
(269 / 269)
8.5
0.6 2'920
(259 / 259)
21.2
0.4
2'726
(242 / 433)
42.5
0.1
350
72.5
43
27.3
883.9
2.04
3'021
(268 / 268)
(256 / 256)
25.2
0.6
2'653
(235 / 433)
50.5
0.3
350
83.5
51
30.6
743.8
1.71
3'007
(267 / 267)
(253 / 253)
29.2
0.6
2'581
(229 / 433)
58.5
0.3
350
94.5
59
33.8
642.1
1.48
3'564
(355 / 355)
7.7
0.1 3'457
(345 / 345)
19.2
0.0
3'199
(327 / 566)
38.5
0.0
400
68.5
39
35.2
818.1
2.94
3'542
(353 / 353)
(339 / 339)
25.2
0.1
3'091
(316 / 566)
50.5
0.0
400
84.5
51
41.0
623.7
2.24
3'520
(351 / 351)
(334 / 334)
31.2
0.1
2'982
(305 / 566)
62.5
0.0
400
100.5
63
46.9
503.9
1.81
2'993
(349 / 349)
(328 / 328)
37.2
0.8
2'520
(294 / 566)
74.5
0.6
400
116.5
75
52.7
422.8
1.52
4'542
(453 / 453)
7.7
0.3 4'421
(441 / 441)
19.2
0.3
4'220
(421 / 716)
38.5
0.1
450
68.5
39
44.6
1'277.1
3.72
4'517
(450 / 450)
(435 / 435)
25.2
0.4
4'094
(408 / 716)
50.5
0.1
450
84.5
51
52.1
973.6
2.83
4'492
(448 / 448)
(428 / 428)
31.2
0.4
3'969
(396 / 716)
62.5
0.3
450
100.5
63
59.5
786.7
2.29
4'466
(445 / 445)
(422 / 422)
37.2
0.6
3'843
(383 / 716)
74.5
0.3
450
116.5
75
66.9
660.0
1.92
5'638
(562 / 562)
7.7
(549 / 549)
19.2
0.3
5'279
(526 / 884)
38.5
0.1
500
68.5
39
55.2
1'888.3
4.59
0.4 5'503
5'610
(559 / 559)
(542 / 542)
25.2
0.4
5'139
(512 / 884)
50.5
0.3
500
84.5
51
64.4
1'439.6
3.50
5'582
(556 / 556)
(535 / 535)
31.2
0.6
5'000
(498 / 884)
62.5
0.4
500
100.5
63
73.6
1'163.2
2.83
5'554
(554 / 554)
(528 / 528)
37.2
0.7
4'860
(484 / 884)
74.5
0.4
500
116.5
75
82.8
975.8
2.37
5'526
(551 / 551)
(521 / 521)
43.2
0.8
4'720
(471 / 884)
86.5
0.6
500
132.5
87
92.0
840.4
2.04
6'821
(680 / 680)
(660 / 660)
25.2
0.6
6'303
(628 / 1070)
50.5
0.4
550
84.5
51
78.1
2'037.0
4.23
6'790
(677 / 677)
(653 / 653)
31.2
0.7
6'149
(613 / 1070)
62.5
0.4
550
100.5
63
89.2
1'645.9
3.42
6'760
(674 / 674)
(645 / 645)
37.2
0.8
5'995
(598 / 1070)
74.5
0.6
550
116.5
75
100.4
1'380.8
2.87
6'729
(671 / 671)
(637 / 637)
43.2
1.0
5'841
(582 / 1070)
86.5
0.7
550
132.5
87
111.5
1'189.2
2.47
6'698
(668 / 668)
(630 / 630)
49.2
1.1
5'687
(567 / 1070)
98.5
0.8
550
148.5
99
122.6
1'044.3
2.17
8'151
(812 / 812)
(791 / 791)
25.2
0.6
7'585
(756 / 1273)
50.5
0.4
600
84.5
51
93.1
2'779.6
5.04
8'117
(809 / 809)
(783 / 783)
31.2
0.6
7'417
(739 / 1273)
62.5
0.4
600
100.5
63
106.3
2'245.9
4.07
8'084
(805 / 805)
(774 / 774)
37.2
0.7
7'249
(722 / 1273)
74.5
0.6
600
116.5
75
119.6
1'884.2
3.42
8'050
(802 / 802)
(766 / 766)
43.2
0.8
7'081
(706 / 1273)
86.5
0.7
600
132.5
87
132.9
1'622.8
2.94
8'016
(799 / 799)
(758 / 758)
49.2
1.0
6'913
(689 / 1273)
98.5
0.8
600
148.5
99
146.1
1'425.1
2.58
7'983
(795 / 795)
(749 / 749)
55.2
1.1
6'744
(672 / 1273)
110.5 1.0
600
164.5
111
159.4
1'270.3
2.30
9'599
(956 / 956)
(933 / 933)
25.2
0.4
8'985
(895 / 1494)
50.5
0.4
650
84.5
51
109.4
3'679.3
5.91
9'562
(953 / 953)
(924 / 924)
31.2
0.6
8'803
(877 / 1494)
62.5
0.4
650
100.5
63
125.0
2'972.9
4.78
Ndmin
v
ab
(Concrete/Steel) xyd
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
ab
Ndmin
v
(Concrete/Steel) xyd
ab
Bearing dimensions/Parameters
d
Te
Weight
Kz
Kxy
[kN]
[kN]
[kN]
[mm]
[%]
[kN]
[kN]
[mm] [%]
[mm]
[mm]
[mm]
[kg]
9'526
(949 / 949)
(915 / 915)
37.2
0.7
8'621
(859 / 1494)
74.5 0.6
650
116.5
75
140.6
[kN/mm] [kN/mm]
2'494.0
4.01
9'490
(945 / 945)
(906 / 906)
43.2
0.8
8'438
(841 / 1494)
86.5 0.7
650
132.5
87
156.1
2'148.0
3.45
9'453
(942 / 942)
(897 / 897)
49.2
1.0
8'256
(823 / 1494)
98.5 0.8
650
148.5
99
171.7
1'886.3
3.03
9'417
(938 / 938)
(888 / 888)
55.2
1.1
8'074
(804 / 1494)
110.5 1.0
650
164.5
111
187.3
1'681.5
2.70
9'380
(935 / 935)
(879 / 879)
61.2
1.3
7'891
(786 / 1494)
122.5 1.0
650
180.5
123
202.9
1'516.8
2.44
33.2
0.6
9'602
(1020 / 1732)
66.5 0.4
700
104.5
67
147.2
2'355.7
5.21
(1062 / 1062)
41.2
0.7
9'356
(994 / 1732)
82.5 0.6
700
125.5
83
170.3
1'898.9
4.20
(1048 / 1048)
49.2
0.8
9'110
(968 / 1732)
98.5 0.7
700
146.5
99
193.5
1'590.4
3.52
(1035 / 1035)
57.2
1.1
8'865
(942 / 1732)
114.5 0.8
700
167.5
115
216.6
1'368.2
3.02
(1022 / 1022)
65.2
1.3
8'619
(916 / 1732)
130.5 1.0
700
188.5
131
239.7
1'200.4
2.65
(1009 / 1009)
73.2
1.4
8'374
(890 / 1732)
146.5 1.0
700
209.5
147
262.9
1'069.3
2.36
33.2
66.5 0.4
750
104.5
67
169.1
3'019.8
5.98
41.2
82.5 0.6
750
125.5
83
195.7
2'434.2
4.82
49.2
98.5 0.7
750
146.5
99
222.3
2'038.8
4.04
57.2
750
167.5
115
248.9
1'753.9
3.47
65.2
750
188.5
131
275.4
1'538.8
3.05
73.2
1.4
750
209.5
147
302.0
1'370.8
2.71
33.2
66.5 0.4
800
104.5
67
192.6
3'797.0
6.80
9'802
41.2
82.5 0.6
800
125.5
83
222.9
3'060.6
5.48
49.2
98.5 0.7
800
146.5
99
253.1
2'563.5
4.59
57.2
800
167.5
115
283.4
2'205.2
3.95
65.2
800
188.5
131
313.6
1'934.9
3.47
73.2
800
209.5
147
343.9
1'723.6
3.09
81.2
800
230.5
163
374.2
1'553.8
2.78
33.2
850
104.5
67
217.6
4'693.8
7.68
66.5 0.4
41.2
82.5 0.6
850
125.5
83
251.8
3'783.5
6.19
49.2
98.5 0.7
850
146.5
99
286.0
3'168.9
5.18
57.2
850
167.5
115
320.1
2'726.1
4.46
65.2
850
188.5
131
354.3
2'391.9
3.91
73.2
850
209.5
147
388.5
2'130.7
3.49
81.2
850
230.5
163
422.7
1'920.9
3.14
41.2
900
120.5
83
257.8
3'311.4
6.94
51.2
900
145.5
103
299.6
2'665.3
5.59
61.2
900
170.5
123
341.4
2'230.1
4.67
71.2
900
195.5
143
383.2
1'917.1
4.02
81.2
900
220.5
163
425.0
1'681.2
3.52
91.2
900
245.5
183
466.7
1'496.9
3.14
900
270.5
203
508.5
1'349.1
2.83
82.5 0.7
Ndmin
v
ab
(Concrete/Steel) xyd
[kN]
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
[kN]
ab
Nd
[mm]
[%]
[kN]
[kN]
ab
Bearing dimensions/Parameters
d
Te
Weight
[mm] [%]
[mm]
[mm]
[mm]
[kg]
Kz
Kxy
[kN/mm] [kN/mm]
696
(86 / 86)
3.2
0.0
649
(84 / 84)
8.0
0.0
573
(80 / 142)
16.0 0.0
200
39
16
7.9
271.2
691
(85 / 85)
4.8
0.0
635
(82 / 82)
12.0
0.0
547
(77 / 142)
24.0 0.0
200
50
24
8.9
180.8
1.77
1.18
604
(84 / 84)
6.4
0.7
573
(80 / 80)
16.0
0.4
521
(73 / 142)
32.0 0.0
200
61
32
9.9
135.6
0.88
1'400
(137 / 137)
3.2
0.0 1'311
(134 / 134)
8.0
0.0
1'169
(129 / 221)
16.0 0.0
250
39
16
12.5
655.5
2.76
1'391
(136 / 136)
4.8
0.0 1'289
(132 / 132)
12.0
0.0
1'128
(125 / 221)
24.0 0.0
250
50
24
14.1
437.0
1.84
1'381
(135 / 135)
6.4
0.0 1'266
(129 / 129)
16.0
0.0
1'086
(120 / 221)
32.0 0.0
250
61
32
15.7
327.8
1.38
2'232
(198 / 198)
4.8
0.1 2'176
(193 / 193)
12.0
0.0
2'019
(185 / 319)
24.0 0.0
300
50
24
20.4
880.5
2.65
2'220
(197 / 197)
6.4
0.1 2'145
(190 / 190)
16.0
0.0
1'958
(179 / 319)
32.0 0.0
300
61
32
22.8
660.4
1.99
2'207
(196 / 196)
8.0
0.3 2'114
(188 / 188)
20.0
0.1
1'898
(174 / 319)
40.0 0.0
300
72
40
25.2
528.3
1.59
2'157
(195 / 195)
9.6
0.4 2'047
(185 / 185)
24.0
0.1
1'838
(168 / 319)
48.0 0.0
300
83
48
27.5
440.3
1.33
3'069
(272 / 272)
4.8
0.3 3'004
(266 / 266)
12.0
0.1
2'895
(257 / 433)
24.0 0.1
350
50
24
28.0
1'565.2
3.61
3'055
(271 / 271)
6.4
0.4 2'967
(263 / 263)
16.0
0.3
2'822
(250 / 433)
32.0 0.1
350
61
32
31.2
1'173.9
2.71
3'040
(270 / 270)
8.0
0.6 2'931
(260 / 260)
20.0
0.4
2'749
(244 / 433)
40.0 0.1
350
72
40
34.4
939.1
2.16
3'026
(268 / 268)
9.6
0.6 2'895
(257 / 257)
24.0
0.4
2'676
(237 / 433)
48.0 0.3
350
83
48
37.7
782.6
1.80
1.55
3'011
(267 / 267)
(254 / 254)
28.0
0.6
2'603
(231 / 433)
56.0 0.3
350
94
56
40.9
670.8
3'569
(356 / 356)
7.2
0.1 3'469
(346 / 346)
18.0
0.0
3'222
(329 / 566)
36.0 0.0
400
64
36
45.4
874.9
3.14
3'547
(354 / 354)
9.6
0.3 3'413
(340 / 340)
24.0
0.1
3'113
(318 / 566)
48.0 0.0
400
80
48
51.2
656.2
2.36
3'524
(351 / 351)
(335 / 335)
30.0
0.1
3'005
(307 / 566)
60.0 0.0
400
96
60
57.1
524.9
1.88
3'101
(349 / 349)
(329 / 329)
36.0
0.7
2'628
(296 / 566)
72.0 0.4
400
112
72
62.9
437.4
1.57
4'547
(453 / 453)
7.2
0.3 4'434
(442 / 442)
18.0
0.3
4'246
(423 / 716)
36.0 0.1
450
64
36
57.6
1'365.8
3.98
4'522
(451 / 451)
9.6
0.4 4'371
(436 / 436)
24.0
0.4
4'120
(411 / 716)
48.0 0.1
450
80
48
65.0
1'024.3
2.98
4'497
(448 / 448)
(430 / 430)
30.0
0.4
3'995
(398 / 716)
60.0 0.3
450
96
60
72.5
819.5
2.39
4'472
(446 / 446)
(423 / 423)
36.0
0.6
3'869
(386 / 716)
72.0 0.3
450
112
72
79.9
682.9
1.99
5'644
(563 / 563)
7.2
0.4 5'518
(550 / 550)
18.0
0.3
5'308
(529 / 884)
36.0 0.1
500
64
36
71.3
2'019.4
4.91
5'616
(560 / 560)
9.6
0.6 5'448
(543 / 543)
24.0
0.4
5'169
(515 / 884)
48.0 0.3
500
80
48
80.5
1'514.6
3.68
5'588
(557 / 557)
(536 / 536)
30.0
0.6
5'029
(501 / 884)
60.0 0.4
500
96
60
89.7
1'211.6
2.95
5'560
(554 / 554)
(529 / 529)
36.0
0.7
4'889
(487 / 884)
72.0 0.4
500
112
72
98.9
1'009.7
2.45
5'532
(551 / 551)
(522 / 522)
42.0
0.8
4'749
(473 / 884)
84.0 0.6
500
128
84
108.1
865.5
2.10
6'828
(680 / 680)
9.6
0.6 6'643
(662 / 662)
24.0
0.6
6'335
(631 / 1070)
48.0 0.4
550
80
48
97.6
2'143.1
4.45
6'797
(677 / 677)
(654 / 654)
30.0
0.7
6'181
(616 / 1070)
60.0 0.4
550
96
60
108.8
1'714.5
3.56
6'766
(674 / 674)
(647 / 647)
36.0
0.8
6'027
(601 / 1070)
72.0 0.6
550
112
72
119.9
1'428.7
2.97
6'735
(671 / 671)
(639 / 639)
42.0
1.0
5'873
(585 / 1070)
84.0 0.7
550
128
84
131.0
1'224.6
2.55
6'704
(668 / 668)
(631 / 631)
48.0
1.1
5'720
(570 / 1070)
96.0 0.8
550
144
96
142.2
1'071.5
2.23
8'158
(813 / 813)
9.6
0.6 7'956
(793 / 793)
24.0
0.4
7'620
(759 / 1273)
48.0 0.4
600
80
48
116.4
2'924.4
5.30
8'124
(810 / 810)
(784 / 784)
30.0
0.6
7'452
(743 / 1273)
60.0 0.4
600
96
60
129.7
2'339.5
4.24
8'091
(806 / 806)
(776 / 776)
36.0
0.7
7'284
(726 / 1273)
72.0 0.6
600
112
72
142.9
1'949.6
3.53
8'057
(803 / 803)
(768 / 768)
42.0
0.8
7'116
(709 / 1273)
84.0 0.7
600
128
84
156.2
1'671.1
3.03
8'023
(799 / 799)
(759 / 759)
48.0
1.0
6'948
(692 / 1273)
96.0 0.8
600
144
96
169.5
1'462.2
2.65
7'990
(796 / 796)
(751 / 751)
54.0
1.1
6'780
(676 / 1273)
108.0 1.0
600
160
108
182.7
1'299.7
2.36
9'607
(957 / 957)
9.6
0.6 9'388
(935 / 935)
24.0
0.4
9'023
(899 / 1494)
48.0 0.4
650
80
48
136.8
3'870.9
6.22
9'570
(953 / 953)
(926 / 926)
30.0
0.6
8'841
(881 / 1494)
60.0 0.4
650
96
60
152.4
3'096.7
4.98
Ndmin
v
ab
(Concrete/Steel) xyd
[kN]
[kN]
9'534
(950 / 950)
[mm] [%]
Ndmin
v
(Concrete/Steel) xyd
[kN]
(917 / 917)
ab
[mm] [%]
36.0
0.7
Ndmin
v
(Concrete/Steel) xyd
[kN]
[kN]
8'659
(863 / 1494)
ab
Bearing dimensions/Parameters
d
Te
[mm] [%]
[mm]
[mm]
[mm]
[kg]
72.0
650
112
72
168.0
0.6
Weight
Kz
Kxy
[kN/mm] [kN/mm]
2'580.6
4.15
9'497
(946 / 946)
(908 / 908)
42.0
0.8
8'476
(845 / 1494)
84.0
0.7
650
128
84
183.6
2'212.0
3.56
9'461
(943 / 943)
(899 / 899)
48.0
1.0
8'294
(826 / 1494)
96.0
0.8
650
144
96
199.2
1'935.5
3.11
9'424
(939 / 939)
(890 / 890)
54.0
1.1
8'112
(808 / 1494)
108.0 1.0
650
160
108
214.8
1'720.4
2.77
9'388
(935 / 935)
(881 / 881)
60.0
1.3
7'929
(790 / 1494)
120.0 1.0
650
176
120
230.3
1'548.4
2.49
32.0
0.6
9'640
(1024 / 1732)
64.0
0.4
700
99
64
176.1
2'447.8
5.41
40.0
0.7
9'394
(998 / 1732)
80.0
0.6
700
120
80
199.2
1'958.2
4.33
(1051 / 1051)
48.0
0.8
9'149
(972 / 1732)
96.0
0.7
700
141
96
222.4
1'631.8
3.61
(1037 / 1037)
56.0
1.1
8'903
(946 / 1732)
112.0 0.8
700
162
112
245.5
1'398.7
3.09
(1024 / 1024)
64.0
1.3
8'658
(920 / 1732)
128.0 1.0
700
183
128
268.6
1'223.9
2.71
(1011 / 1011)
72.0
1.4
8'412
(894 / 1732)
144.0 1.0
700
204
144
291.8
1'087.9
2.41
32.0
64.0
0.4
750
99
64
202.4
3'137.8
6.21
40.0
80.0
0.6
750
120
80
229.0
2'510.2
4.97
48.0
96.0
0.7
750
141
96
255.5
2'091.9
4.14
56.0
750
162
112
282.1
1'793.0
3.55
64.0
750
183
128
308.7
1'568.9
3.11
72.0
1.4
750
204
144
335.3
1'394.6
2.76
32.0
64.0
0.4
800
99
64
230.5
3'945.3
7.07
40.0
80.0
0.6
800
120
80
260.8
3'156.3
5.65
96.0
9'843
48.0
0.7
800
141
96
291.0
2'630.2
4.71
56.0
800
162
112
321.3
2'254.5
4.04
64.0
800
183
128
351.5
1'972.7
3.53
72.0
800
204
144
381.8
1'753.5
3.14
80.0
800
225
160
412.1
1'578.1
2.83
32.0
64.0
0.4
850
99
64
260.4
4'877.2
7.98
40.0
80.0
0.6
850
120
80
294.6
3'901.8
6.38
48.0
96.0
0.7
850
141
96
328.8
3'251.5
5.32
56.0
850
162
112
363.0
2'787.0
4.56
64.0
850
183
128
397.2
2'438.6
3.99
72.0
850
204
144
431.3
2'167.6
3.55
80.0
850
225
160
465.5
1'950.9
3.19
40.0
0.7
900
115
80
305.9
3'414.9
7.16
80.0
50.0
900
140
100
347.7
2'731.9
5.73
60.0
900
165
120
389.5
2'276.6
4.77
70.0
900
190
140
431.3
1'951.4
4.09
80.0
900
215
160
473.0
1'707.4
3.58
90.0
900
240
180
514.8
1'517.7
3.18
40.0 2.4 12'537 (1665 / 1665) 100.0 2.1 10'954 (1455 / 2863) 200.0 1.8
900
265
200
556.6
1'366.0
2.86
The formwork for the construction of the levelling course should fit the bearing
very closely so that no concrete can leak down the sides of the bearing and
subsequently influence its freedom of movement (skewing, torsion). The
formwork must also be easy to remove. Polystyrene foam has been proven to
be suitable for this.
The bearings should in general be arranged so that they can be replaced
without difficulty.
Installation requirements
= NBf (fixed )
= NBe (movement in one direction)
= NBa (movement in all directions)
= F (bearing with guidance)
L = length of bearing
B = width of bearing
x = longitudinal axis of bridge
y = transversal axis of bridge
Floating support
NBa
NBa
NBa
NBa
NBf
NBa
NBe
Fixed support using
horizontal force bearings
NBa
F
NBa
NBa
S
NBa
CE certification
mageba LASTOBLOCK elastomeric bearings have successfully fulfilled all
requirements according to the European standard.
Quotes
The following details are necessary to provide you with a quote:
If the size has already been ascertained:
Max. bearing dimensions:
a, b, t
Desired bearing type
B, C, B/C, C-RB
Material quality:
CR / NR
Otherwise, please provide us with the following information, so that we can
calculate and provide your desired LASTOBLOCK elastomeric bearing:
Vertical loads:
Ndmax and Ndmin
Displacements:
vxyd
Bearing rotation:
ab
Bearing shape (round or rectangular)
Contact surfaces (steel or concrete)
Maximum dimensions (when space for the bearing is limited)
Quotes are processed immediately and delivered promptly.
Order placement
The Delivery time for LASTOBLOCK elastomeric bearings is approximate 45 weeks. For elastomeric bearings with retaining structures the delivery time is
6-8 weeks after approval of the technical drawings. Certification according to
EN1337-3 can also be provided upon request.
We are also happy to accept contracts for custom bearings and/or large
quantity orders: please ask us for further details about this.
Pot bearings
Elastomeric bearing
Spherical bearings
Incremental Launch
Bearings
- Earthquake Bearings
- Special bearings
- Rocker bearings
Expansion joints
-
Shock absorbers
- Hydraulic shock
absorbers
- Spring absorbers
Services
-
Inspections
Tests
Installation
Refurbishment
Cleaning
Remote monitoring
For more information about mageba and our products, visit our website: www.mageba.ch.
Version 2008.02
mageba sa
Solistrasse 68
8180 Blach
Switzerland
Tel.: +41-44-872 40 50
Fax: +41-44-872 40 59
info@mageba.ch
mageba gmbh
Fussach, Austria
Tel.: +43-5578-75593
Fax: +43-5578-73348
oesterreich@mageba.ch
mageba gmbh
Uslar, Germany
Tel.: +49-5571-9256-0
Fax: +49-5571-9256-56
uslar@mageba.ch
mageba sa
Cugy VD, Switzerland
Tel.: +41-21-731-0710
Fax: +41-21-731-0711
suisse@mageba.ch
mageba gmbh
Esslingen a.N., Germany
Tel.: +49-711-758844-0
Fax: +49-711-758844-56
stuttgart@mageba.ch