Professional Documents
Culture Documents
Specifications
Comprehensive training in
the new CADWorx 2013
Specifications!
nthony W. Horn
CAD Training Technologies,
LLC Copyright 2012 All
rights reserved
PipingDesignOnline.com
Table of Contents
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
PipingDesignOnline.com
Video 1
Setting the Configuration Creating a Company Catalog
Video 2
Modifying the Size Table Viewing the other Tables Importing Legacy Data Files
Video 3
Creating a New Data File A New Top works file
Video 4
Valve with Special End Types
Video 5
Creating a New Project Importing Legacy Specs
Video 6
Modifying Component Info Thickness in Long Desc. Adding Top works in a Spec Testing Results
Video 7
Adding Valves to the Spec Testing Results
3
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
6. So at first, our new version might take a little bit of getting used
to, but the end result is going to be a much improved way of
setting up our specifications and component data. So let's take
a look at that now.
9. One way we can start the spec editor is to double click this file
the CADWorxSpecEditor.exe file. So I'm going to doubleclick that file and the spec editor will start.
10. You can also start the spec editor from within CADWorx. If we
went to CADWorx and you look on the CADWorx Plant I tab,
there's a button that will start the spec editor. So you can
start it from within the folder, the way we just did, or you can
also start it from within CADWorx itself. One option or one
advantage of doing it the way we just showed you, where you
12. Click this top button and select new catalog. There are
several types of catalogs: a company catalog, an industry
catalog, or a global catalog.
14. Next well tell the system where our source-file is located. If
we go to this box with dots in it and click, we can choose one of
the samples that ship with the system. For this example, I'm
going to use the Sample_Metric_Inch. Why don't you do the
same for this starting example, and then later you can do the
one you like?
15. After selecting that, click open. Next well set the units. Click
the down arrow, and choose the Metric/Inch format. Now
things are set as needed.
18. If you click the plus next to size table in the base catalog at
the bottom, you can see there is a size table in the base
catalog. Ill highlight it and then hold down the left mouse
button and drag it up and release. It will get copied into the
size table in the new company catalog.
19. So that's what we're going to do. We're going to click these
tables in the base catalog drag them up into our company
catalog. That way we can build our catalog to match the
sample. The reason you use this method is there may be some
things you don't want to bring in. Ill copy the thickness table
up, and I'll do the same with the end type tables. You can
see there are a variety of tables in the base catalog.
20. Ill click on the buttweld end type, and then I'll scroll down
while holding down the Shift key. That selects all of these.
Then drag them up, and theyll be copied into the end type
table in the company catalog.
21. Now we'll bring in the data tables. These are all the
measurement files. These used to be text files in the library
folders in earlier version. In this version they dont contain
descriptive data, just measurement data.
22. Ill come down and click the plus next to data tables. The
different component types are all listed. Holding down the
shift key, Ill click the first and last one listed, which will
select all of them.
23. Then holding down the left button of the mouse, Ill drag
these up to the company catalog and release. They'll be
copied from the sample catalog into the company catalog. If I
hit the plus next to data tables in the company catalog, I can
see that all the information is in there. So why don't you get it to
this point, and then we'll continue from here?
4. For our example, highlight the three and a half, or just click in
this square, and then you can right click and click to remove
this row. Click "OK", and it will take that size out of the table.
You can see that its quite easy to work with.
5. Click the plus next to the material table. Double click MAT
and it opens the list of materials that are available for our
components. We can see different kinds of specifications,
grades, compositions, and densities. We can see how these
are applied to various types of components.
PipingDesignOnline.com
7. Scrolling down, you can see this list is very extensive. Here's a
typical entry, an A53 Grade B. The densities are going to be
used later, along with the thickness table, to calculate the
weight of components.
11. Next, click the plus next to end type tables and expand it.
There are a number of end types available for use in CADWorx.
It is straight forward to create components with different end
types. For example, we could make a gate valve that's
threaded on one side and flanged on the other. We'll do that
as part of our exercises later.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
17. This will let us bring in some files. We can bring in an individual
file, or we can bring in folders. We can also take things out.
I'm going to click "Add Files," and we can do a search and
find the file to import.
18. By default, the system will take you to your current location on
your newest version of CADWorx, probably in the spec folder.
Click on the C: drive, and well find the folder or file we want
to bring in.
21. Now Ill look for the data files that I need. What I'm looking for
is a flanged gate valve data file which is set up for larger sizes.
It's this one right here (GAT_F_L.150). If I double click it, it
will bring it into the import dialog box. Note: If you dont have a
previous version of CADWorx on your machine you can double
click the file in your CADWorx_Lesson_Files\Specifications
folder that you downloaded. The file is named GAT_F_L.150.
23. Click By Column Count. If you double click the file name,
the data file will open and you can see the
This is a
details.
gate valve that goes from 18 up to 48 inches. So this will work
great for what we need.
24. In the older versions, the data files included what manufacturer
the valve data came from. This information in this file came
from a Crane 55 catalog. The valves usually have information
like this given since they can vary. With fittings, this information
is usually not included since they're going to be consistent.
25. We've got this highlighted. We've got a list of data file types, so
we will select one that matches the type of file were bringing in.
If we select the Gate Valve, Buttweld/Flanged, and we click
Import, it will import the data file into our catalog.
26. Another thing to do is click on the View Log File button, and
you'll see a record of the different conversions that you've done
to bring in legacy data into your catalog. This is something you
can print out later to have a record of your work.
27. Now lets click the "Close" button. Look down under gate
valves and youll see the file we just imported. Here it is, this
gate flange large (GAT_F_L_150). If we double click it, the
file will open, and we can see the data.
28. So that's how you can bring in legacy data into your catalog in
the new version. You might have some components you built
yourself from scratch, and you want to bring them in and have
them as part of your catalog.
29. So you
2. Now well see how to create data files from scratch. We'll
create a couple of new data files in this video. This is what
youll do in the future, for example, if you want to add a new
type of valve into your catalog.
3. In this example I've got a couple of cut sheets for some valves,
and we're going to use those as examples. Another thing we're
going to take a look at is some of the enhanced mode
settings, which will show enhanced graphics. In this new
version of CADWorx, if you set your drawing mode to
enhanced, the system can display bolt holes in the flanges.
5. There are three things to fill out to get the enhanced graphics
to work. They're going to be values for the bolt hole diameter,
the bolt circle diameter, and the bolt hole number. Then
when were running in enhanced mode we'll see the holes
in the flanges get modeled, based on these values in the
data tables.
6. Well close this for now. Next were going to build some data
files from scratch. We'll be adding a couple of valves. Scroll
down to Valves and click the plus next to that to expand it.
Scroll down to Gate Valve and click on the plus next to that.
PipingDesignOnline.com
7. Hover the pointer on Gate Valve and then right click and we
can add a data table. The system will bring up a dialog box for
us, and we can begin to fill this out. So what we'll call this one is
GAT_F_CMPT_150. This will be a data file for a compact
flanged gate valve, 150 pound rating.
8. In the size table click the box with 3 dots. Here you can
specify the sizes that you want to work with. Well enter an 8,
10, and a 12 valve. You could add however many sizes you
wanted to include.
9. The next step is to set these valves to have the same end
condition on both ends. Click the box to Apply to the same
end-type on both ends. The first end will be a flange.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
12. Our data file for is ready for filling out. Click in the box
underneath the hub OD diameter and we'll put in some
values. We're going to use 342, and the one under that will be
406. The one under that will be 482. Then we'll go over to
the right for the lengths, and we'll enter 292, 330, and 358.
Finally for the weight, click in the field for that and enter
281, 399, and 562. This will complete the dimensional
information for the valves.
13. Now click the X to close it, and save it. The system has a
small indicator next to the name, but that will disappear once
the project or the catalog is saved and
We now
reopened.
have the measurement data in here to draw this. Next well
add some top works for this valve.
Click the
plus. Click the plus next to Wheel. This is where well add a
Top Works file. Hover over Wheel and right click. Now we
can add a top works data file for the gate valve we just
created.
16. For Type, click the down arrow, and select Wheel. Size will
be the same, 8, 10, and 12. Description: TOP WORKS FOR
COMPACT EXPANDING GATE VALVE, then click OK.
value will be 150, 165, and then finally 178. The operator
thickness will be 12, 15, and 18. The operator length will be
1168, 1376, and finally 1567.
18. Now close this by clicking the X, and save it. This is ready
to work now. We have one more valve to add, but let's save it
for the next
Get this information filled in as we showed,
video.
and then we'll continue on after that.
2. Were in the spec editor. Click the plus next to the data
tables, scroll down to valves and click the plus next to it to
expand the list. Click the plus next to gate valves and that
will expand. When we look at the data files, we can see our
previous valve (GAT_F_CMPT_150).
4. Now we'll add the second valve. I'm going to right click on
Gate Valve, and I'm going to add a data table. This is going to
be a gate valve that has special end types. Push down the cap
lock key and type GAT_THD_x_FLG. It's a gate valve
threaded on one end and flanged on the other.
PipingDesignOnline.com
5. We need to have a size table available next. If you don't see it,
click the down arrow and just select size. We're only going to
do one entry for this example. Click the box with the dot dot
dot, and we'll set it for two inches. Click OK once thats done.
7. Scroll down and look for "threaded." Then look for a gate
valve. The one listed is "threaded gate", and it's got an 800
pound rating (THRD_GAT_T_C_800).
8. Well do something similar for the other end condition. Look for
"flanged gate", so scroll down to "flange," and look for GAT.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
10. We have one size valve to fill out. On the hub OD, use 60.3.
For the length, enter 178. For the weight, enter 4.
11. Click the X in the corner of the dialog box to close this and
click Yes to save it.
12. The graphic next to the new file appears. Right click here, and
go to Properties. Enter your initials here. In my case, I'll put
AH, and I'll do the in the lower field, then close it.
13. To clear the graphic, well close and reopen the Company
catalog. Click on the main button at the top, and click on
Sample Inch. Save the work when prompted.
14. Open the Sample Inch catalog. Next, click on the new
catalog you just completed (Company1.cmp). When it
reopens, everything will come in clean. Go to Data Tables,
and click the plus, and come down to Valves. Expand the
Gate valves and you can see now that the work we just
completed is there. So saving and reopening the catalog will
clear notification symbols like we just had.
15. The next videos will cover working with specifications. We'll
bring in some legacy specs, and we'll add some records to
them. We'll also use these data files we just completed and
well add them into a spec for use.
16. We've got a few more things to cover, but we're making good
progress!
2. The Spec Editor is running. You can click the button on the
Ribbon to start it, or you can go in the folder and double
click the .exe file to start it.
3. Click the top button in the spec editor and select "New
project." Projects are collections of specs. Its how theyre
organized in the new
Leave the name as Project1, or
version.
you can add your own name if you
The system requires a
like.
source catalog. Click the box with three dots in it to
browse.
4. Now just looking at what's listed we can see some of these are
quite specific. This one, for instance, is going to be for
fiberglass reinforced pipe in inches, in imperial sizes. Here's
one that's going to be stainless steel in inches. So this is how
they brought some of the old data across. They have them
formatted the data files and spec information in this way now.
PipingDesignOnline.com
5. Toward the end of the list we see some sample inch, sample
metric, sample metric inch catalogs. These are going to be
more extensive. These actually are what we used to see under
LIB_I or LIB_MM or Lib_M.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
12. Our project has been created. At this point, we could add a
spec from scratch or we could import one into our project. We
have some other options here. We could move data from a
previous project over to our new
For this example, let's
project.
import a legacy specification into our Project. Click on the
Import Legacy Specification button.
13. Click the box with the 3 dots in it to browse. Browse to your
old CADWorx folder (if you have one). On my machine heres
a CADWorx 2012 version. If you have old specs elsewhere on
your system you can browse to them and import them.
16. The system requires a catalog to link to. It also needs a size
table. We'll select Import and the spec will be imported. A
note here shows that it came in successfully.
17. Import the A10, B10, and C10 spec. You can import them
from the CADWorx_Lesson_Files\Specifications folder, or if
you have some on your system you want to import in, you can
select them. I'll import the B10_M and the C10_M specs. You
can also bring in any of the old sample specs as well, if you
have access to them. (Note: In the Spec folder in your
latest version you can also import data from any of the
catalogs, projects, and specs in the folder. These are new
versions of the legacy specs found in earlier versions of
CADWorx)
3. I'm going to click on the 2 to 24. When I click it, it starts filling
out the bottom part of the screen with spec information.
PipingDesignOnline.com
6. This is where this Spec Editor gets really nice, because there
are things we can do on a component-by-component basis.
What I can do under this long description area, I can click
this box with 3 dots to do a special format for this component.
If I click that, what I'll be able to do is click the down arrow
and go find a thickness table. There are different fields and
values in that table.
8. To make this read well I'll click after that field value and
press the space bar, and just type "THK." Then when I say
OK, it'll actually put that up in the string. At this point click OK,
and it will get set. Click the box with 3 dots again and we'll
take a look.
9. Now we can see how the description will read. Later well test
this. Click Apply to save these changes.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
16. OK. We've modified our spec. Go up here to the main button
on the Spec Editor and click Save. This will save all the
changes that we have made to this point.
17. Now lets test this. I going to minimize the lower part of the
screen, and go into CADWorx Plant. Start a new drawing
using a metric template.
18. Click Setup and click the spec/size. Click Browse, and
select our project.
19. The project that I have is called Project One. If you have the
same name, that's good. If not, just get yours. Click on the
A10_M, and then click next to 10 under Main, and click
Apply and Close.
20. Now well draw a piece of pipe. If the specview tool palette is
set to show all components, you possibly might have two
kinds of pipe displayed. On my screen here's the one that I
modified. This is the one that says Schedule 40, so that looks
good. Also I can see that it has my description showing.
21. Click Pipe and click a couple of points. Now we want to see
how the material is being described. If we double click that
pipe, well see what the long description says.
23. You can see that this is very powerful, because you can bring
in all kinds of information from the data files, and automate
building a long description with a number of options. You can
also build a part number in a similar fashion. This new spec
format gives us a lot more versatility than we had before.
24. OK out of the dialog box, and next we'll bring in a gate valve.
Click on the gate valve on the specview tool palette, and
click a couple of points to place it. If the piping rules are set,
we can just click right on the end of this pipe and drag to
the right. You can see how connected to the pipe and placed
the flange, gasket and bolts, because those rules were on for
automatic placement. Also it placed the Top Works.
25. Double clicking the valve shows the valve tag was included
as well.
2. The type of valve we'll add is a gate valve, so click the down
arrow and find gate. In the data table, click the down arrow to
find the gate valve well be adding. In an earlier video, we made
two new valve data files. We made a compact expanding gate
valve, and we made a threaded by flanged gate valve.
3. First we'll add the compact expanding gate valve. I'll click on
that, and the system will read the size out of the data file that
we made earlier. You can see, it has the 8 to 12 setting.
Everything else filled out in the data is standard. The system
reads the schedule and the material information, and fills it out
for us automatically.
PipingDesignOnline.com
4. Let's specify the top works for this valve. Looking at the
available entries, we'll set the top works to be the one that
we created. Scroll down and find that. It's the wheel gate
compact (WHEEL_GATE_CMPT_150_F_M.top), so that has
now been added.
6. Next, we'll add the other valve. Scroll back up to valves, and
right-click on valves. Then click add, and the system will
open up another dialog box to fill out.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
10. So everything is filled out well, click Add. One thing to mention
here is we made this an optional component, and what that
does for us is on the spec view tool palette, when it lists the
different gate valves, these that have Optional checked off will
come in shown in blue. This indicates they are not the default
gate valve.
12. We'll add a control valve. Click the down arrow and click on
Control. Now well select one to add.
14. Click the top button and click Save. This saves the project.
16. The catalogue is open, expand the Data Tables. This area of
the spec editor screen works for brining in data files from older
versions. It gives us a couple of ways to import data. We can
bring in legacy data from an earlier spec or, from a data file that
we have elsewhere on our system.
17. Click Import From Data File, and this brings up a dialog box
for adding files to bring in.
20. Located in this folder are some control valves. These are the
data files for other kinds of control valves. Click on the B file,
and hold down the Shift key and click on the K file. Click
Open.
22. And then if I click on one of the files, I'll be given options for
importing. Click on the control valve button and click
Import, and the system will bring it in to your catalog. Do that
for each of these control valves. Now we have some new
data files that can be added to our specification.
23. Save the catalog and reopen the Project1 project. The
system prompts if we want to update the project from the base
catalogs. Click Yes and then double-click the A10 spec.
Click Add.
25. Click the down arrow for Type and select Control Valve. For
the Data Table you will see different valve data files available.
Hover over these and you can see there is a Fisher Type A, a
Fisher Type E, and a Fisher Type K.
26. Click on the Type E control valve and a dialog box appears.
The values are coming from the data file.
27. We have an option to add a top works for the valve. There's a
sample actuator available. Most likely we would create a top
works file for this valve. Leave this field blank for now. Click
on the button to set it as an optional component.
28. For description enter Control Valve, Fisher E. For the Tag
35. Click Setup and click to open your Project 1. Select the A10
spec. Set the size to 3, and click Apply & Close.
37. The current size that you're set to controls what appears in the
spec view tool palette. Thats why we see these two control
valves in the list of components. The three-inch size falls within
the range of these valves.
38. Scrolling down, we don't see the other two that were added (the
compact expanding gate valve and the threaded by flanged
gate valve). This is because the compact expanding gate valve
went from eight to 12 inches in size.
39. Set the size to 8 and the compact expanding gate valve will
appear, as well as one of the other control valves that is in that
size range.
40. Set the size to 2. That's the size we had for our threaded by
flanged gate valve. If we scroll down, we'll see it, so let's place
that and see how it appears.
43. Set the size to 8. Place a piece of pipe into the drawing.
44. Click on the Fisher Type K control valve and press Enter. It
should connect automatically. Since the rules have been set to
place flanges automatically, the system should place a
flange, gasket and bolts. .
So go ahead and test out your components and verify they are
working as expected.
3. Let's start out with our catalog. Click on the main button, and
open up the company catalog we created earlier
(Company1.cmp).
4. Click the plus next to the data tables and scroll down to the
flanges and expand them (click on the + sign). Click on the
plus next to Flange Weld Neck, and double click the
FLG_W_150. The data fields open up and some of the fields
will be changed so we can produce enhanced graphics when
we model them.
PipingDesignOnline.com
5. I'm going to expand this column display a little, and we're going
to set up the 6 inch size here for enhanced graphics. If we
hover over this field we can see it's the raised face diameter.
So well click in that field and enter in 215.9 (Note: Its on the
row for the 6 size).
6. Next click the arrow and go over and up. In this field (which is
the raised face length) enter 1.52. This is the measurement for
the extension of the face.
7. The next one is going to be the bolt hole diameter, and for this
value enter in 22.35. Next will be the bolt circle diameter.
The bolt circle diameter will be 241.3. The next field holes the
bolt hole number. For that field enter in 8. The next one will
be the pipe inside diameter (the column is labeled PID). For
that value enter 152.4.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
13. Some of the ETS values get pretty involved. If we look at Tees,
it has an ETS of seven. So there are a number of ways you
can insert a Tee, such as left end to the center, branch first to
the center, etc.
14. The easiest thing to do if youre creating a new file is use the
ETS value in an existing file. Typically the system will have this
already done for you automatically.
15. Get your catalog modified to here, and well continue in the
next video.
PipingDesignOnline.com
8. The size table will be Size. For this size table well remove
some sizes that will not be in this spec. Click the down arrow
and clear out sizes up to a half inch. This spec will start at a
half-inch on and go up.
9. I'm going to take a couple of other sizes out. Lets remove the
3-1/2, and the 5. Next take out all the larger sizes above 24.
So we'll take out from 28 up. This will set our size ranges like
we want to have for this particular specification.
10. Reviewing whats been removed, Ill also take out the 26 inch
size.
The
material table will be as well. Later the material table might be
modified within the catalog, if we want additional materials and
grades to be available.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
12. The system has an ability to take fields out of these various
tables and put them together into a string that can
automatically build a long description. Later we're going to
take a really good look at how that is done. For this example
well leave this description field empty.
14. When you use this method, you can use certain fields, or
separate them with hyphens. You have options on utilizing this
feature.
16. We have options for the layer name and layer color. For this
spec use color seven.
17. Next well enter our name. You put in your name, and I'll type
mine
The description is Sample Test Spec. Click OK.
in.
20. The system fills out fields in the dialog box, based on the
previous form that we set
We're going to do one more
up.
setting here under Schedule and Material.
21. Click the down arrow for Schedule, and this will be set to
Schedule 40. When this is set, the system can look up wall
thicknesses, since the schedule determines the thickness of the
pipe. Later when we draw this in enhanced mode, the system
will display the pipe inside diameter.
22. For long description you have some choices. You can click in
the box for long description and type in any kind of description
you would like. That's the traditional way of doing it.
23. We also have the ability in this new version of CADWorx to use
data fields from the catalog tables to automate this. This will be
covered in a later video.
24. For this example, we'll leave the long description very simple.
Well do the automation later.
26. Now we're going to add a few more components. I'm going to
right click, and we'll say Add, and we'll bring in an elbow.
28. The dialog box fills out. We could specify specific materials,
which well do later.
33. The type will be the Flange Weld Neck. The data table will be
the
For the long description type in FLANGE
FLG_W_150.
DESCRIPTION. When done, click Add.
34. Next added will be Gaskets and Bolts. Right click and add.
The Group will be Gaskets/Bolts/Welds. The Type is
Gasket, and the data table is GAS_F_2_150.
35. The other fields will be left as shown. For the long
description enter GASKET DESCRIPTION. Click Add.
36. Right click in the open area to add another component. Next
will be for Bolts. The Group will be Gaskets/Bolts/Welds. The
Type is Stud Bolts, and the data table is BLT_F_150.
38. Complete your spec to this point. Then Save the Project. In
the next video well see how Enhanced Graphics work.
PipingDesignOnline.com
5. Select Project1 and click Open. Select the A20_M spec. Next
click on the 6 inch size under Main. Earlier, when we added
size values in the flange data file, the 6 inch flange was the one
that we modified. In an earlier video we set dimensions for the
bolt circle diameter, bolt holes, and the number of bolt holes.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
10. You may or may not want to invoke this rule, but if you can will
help with maintaining your fabrication guidelines.
12. In setting your view, you can use the view cube for that, or you
can also use the View tab on the ribbon. If you use that, you
can select a southwest isometric view as shown in the video.
Another option is to use the menu bar across the top of the
screen. You can click View and then 3D views where you can
select a southwest isometric view.
13. All of these methods produce the same view. Using the
mouse wheel to zoom in, we'll see that we're in enhanced
mode. The system is now drawing the inside diameter of the
pipe.
14. Click Flange and press Enter. The flange will connect
automatically, and we can see that the system is modeling the
holes for the bolts and the raised face of the flange.
16. Now well shade this. In my system I can go to the top are on
my screen and it will display some shading options. Ill set it to
Conceptual. If this is not available, you can go to Visual
Styles, Conceptual on the view tab on the ribbon. You can
also use the menu bar by clicking View, Visual Styles, and
Conceptual.
17. You can see how the 3D Enhanced mode works. It might be
something you would want to do for a presentation to a client,
or just to have your drawings look more realistic.
18. Make sure you go through these steps, and we'll continue after
that.
2. If you use Windows Explorer, you can go to the CADWorx folder and
go to Plant. You can open up the spec folder, and you'll see a list of
files.
4. In the spec editor, click on the button at the top left of the screen,
then click on Project One. This will open our project. If the catalog
has been changed, the system will see that. If prompted, click yes to
update the project from base catalog.
5. Double click the A20_M specification. The spec is now open for
editing. Looking at the screen, down toward the bottom we'll see we
have a Branch Table tab. Sometimes if this gets hidden on the
display, you can always adjust the task bar at the bottom.
PipingDesignOnline.com
6. You can pull the task bar down or back up, and that may reveal the
tabs, if you don't see them at first. Click on the Branch tab, and it
opens up the branch table for editing. You can see that the size ranges
correspond to the sizes that we set earlier, when we set up our project.
We don't have the 3 1/2. We don't have the 5-inch size. We don't have
the 22-inch size in the branch table.
8. We'll select the Straight Tee. When its selected, it will be set for
this size combination. When you select a Tee, a Cross is included.
So this selection will allow Tees and Crosses to be used for this size
combination.
9. If you don't want to have crosses, you can just simply not have them
in your spec. That's another way to control some of this. Have the
cell highlighted, then do a Control-C and then click on cell and
Control-V it. So we can begin to add some tees across the branch
table.
10. Ill pause the video while the rest of the squares for tees and crosses
get filled in. Then I'll show you the squares when they are filled in.
Well carry on in a moment after this.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
11. We have our tees in the table now. I just placed them in this outer
row across the branch table. You do the same. Next I'll click on an
interior square, and right on the mouse.
12. This cell represents a 12-inch main and a 10-inch reduced size
combination. If I right click in this square, I will be allowed to put
in a variety of fittings. In this branch table, I just want to have the
reducing tees or reducing crosses. So that selection gets checked.
13. Now we can Control-C that and click in another space, use ControlV to fill it out. So I'll begin to fill out these reducing tees next. Let
me pause the video and finish this step. Then you can fill out your
table as shown.
14. Here are the reducing tees filled out. You get your branch table to
look the same. You can see that some of these extend right on up
across a number of squares, on the smaller and the larger size ranges.
15. Next to get placed will be the olets. I'll click in one of these other
empty cells, right click and select olet. What we'll have to do if you
want limit these to certain types of olets - perhaps you only want a
weld olet for some of these size combinations - we'll just have to
restrict the sizes within the spec itself.
16. The branch table is set to allow different kinds of olets. Depending
on what's available in your spec, it'll let those come in. I'll go ahead
and place these in. You get your branch table to this point.
17. In the finished branch table you can see there's a large range of sizes
that use olets. Now if these olets are available in our spec and in our
catalog size ranges, the branch table will allow them to be used. The
same is true of the tees, reducing tees, or any of these components that
are listed here.
18. But if we try to put in, for instance, an 18-inch by one-inch thredolet,
or 18-by-one inch weldolet, and it doesn't happen to be in our catalog
size ranges or part of our spec, then it won't matter. It won't come in
anyway. The system will just display a message that it is not
available. So the branch table will allow it, if the components are
actually available within the size ranges in the spec and catalog.
19. I'm going to click on the Component tab now. To test the branch
table let's add a couple of components. Let's right click in the blank
area in the top half of the screen. Select Add. Select Tees, and for
the type select a straight tee.
20. The data table will be Tee_W_Std. The dialog box will fill out. For
the long description use TEE DESCRIPTION. Click Add.
21. Next will be a reducing tee. I'll right click and say Add. We'll put
in another tee; it's going to be our group. The type will be reducing.
23. Next added will be olets. Right click in the blank area and click
Add. The group will be olet. The type will be olet.
24. The data table is where we get specific. For this entry use
WOL_W_STD. For long description use Weldolet Description.
25. Well add one more. Right click in the open area and click Add.
The group will be olets. The type will be olet. The data table will
be TOL_T_30C, which is a Thredolet, 3000 lb. The long
description will be Thredolet Description. Click Add.
26. Now let's check the vailable sizes for some of these. Click on
weldolet. I'll scroll up, and we can see the sizes that we have to work
with on a weldolet. The weldolet standard sizes are 1/2-inch, 3, 4, 6,
8, and 10. These are the sizes of the weldolet itself. These weldolets
can be welded onto larger pipe to make branches.
27. So there are certain combinations in our catalog coming from the data
files that we'll be able to place when we actually start placing this
component. The branch table has some ranges of sizes, which goes all
the way up to 24 inches. But we don't really know if some of these
combinations are available. If they're in the catalog, they'll be able to
come in according to the branch table. But if they're not part of the
catalog files, then we won't really know that at this point.
28. Let's go take a quick look at that. We can click on the main button,
and we can save our project. Let's open up the Company1
catalog. Now let's take a look at some of these data files.
29. Click the plus sign next to data tables, and scroll down to Tees.
Click the plus next to tees and click the plus next to tee reducing.
Select the TEE_W_R_STD. We can see the size ranges that are
available for this.
30. Scrolling down find a 24-inch tee. The main size is 24, and our
reduced size can go from 8 all the way up to 22. So the catalog has
specific size combinations that this reduced tee will work with. If we
try to select size combinations that are not listed here, we'll get a
message that it's not available.
31. Now let's take a look at the olets. I'm going to click the plus next to
O-Lets, and again the plus next to O-Let. We'll come down and
double click the WOL_W_STD. We can see that the weld olets can
go from 1/8 up to 10 inches.
32. This column, PSA, stands for pipe size allowance. So if I expand that
column we can see that for a 2-inch weld olet, you can put that on
a combination of main to reduced all the way up to 14. But if we try
to put a 2-inch weld olet on an 18 inch or a 24 inch pipe, it wouldn't
be allowed. Thats because the catalog only goes up to 14 inches in
size.
33. So if you wanted to expand the size ranges out further, you would just
have to add to this catalog. All right. I'm going to exit this, and we'll
go into CADWorx to test this. Complete your branch table before
proceeding.
2. Click on the Specification/Size, then click the Browse button and select
Project1. Click on A20_M spec, and set the main size to be 6, and the reduced
size to be 3.
3. Check the piping rules and verify that the branch table is set for Automatic.
Click Apply and Close.
PipingDesignOnline.com
4. Now well test the branch table by setting a size combination that the
branch table can control. Well test a 6 Main by 3 Reduced. Well
also be testing a 6 by 2 . Looking at the branch table, a 6 by 3
should force a reducing Tee, or a cross.
8. Next well check the olets. Click the plus next to O-Lets, and click
on the plus next to O-Let. Double click the WOL_W_STD and
verify theres a 3 inch size and also a 2 1/2 inch size. Expand the
PSA column and checking under the 3 inch weldolet, that fitting is
available in a 6 by 3 weldolet. The 2 is also available in a 6 by 2
size. Both the weldolets and the reducing Tees are available in
both 6 by 3 and 6 by 2 .
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
9. This test will check if the branch table actually restricts which choice
can be used. If not, both of these fittings will be available. Let's see
if the branch table is working as designed.
10. I'm back in CADWorx in the drawing, and I have main size set to 6.
I'll click Pipe and I'll draw a length of pipe, and I'll press Enter to
exit routing. If the pipe is longer than the allowed length (according
to the piping rules) and the rule for pipe splitting is on, the system
will
prompt for splitting. In my case Ill press Enter to accept that.
11. And what I want to do now is draw a fitting which will show how the
branch table functions. I'm going to bring in a 3 inch branch into this,
and I'll bring in a 2 inch branch as well. Set the Reduced size to 3
inches. Next, Ill click Pipe and just click a point and drag it up to
the first pipe to form a branch into it. For this I'll use Osnap
perpendicular into the pipe that was drawn first.
12. The branch table, it should force me into a reducing Tee right here.
So when I click Perpendicular into the line, they system shoes
what choices I can use for the branch connection. It shows
Reducing Tees, and this is whats available. When I click the listed
reducing tee it places it. You do the same to verify this on your
system.
13. So the branch table didn't give me an option for a weldolet, which is
good. Now set the main size to 2 . Ill right-click on Pipe this
time, and I'll use socket weld. I'll pick a point and drag it up and
osnap perpendicular into this 6 inch pipe drawn first.
14. Now the system is giving an option to place an olet for the branch
connection. The branch table and spec (and catalog) have both a
threadolet and a weldolet with those size combinations. I'll use a
weldolet. You can see there was no option for a reducing Tee. So
you can see the branch table is controlling which type of fitting
can be used for branches.
16. The system then prompts for the branch direction, when I drag down
and click, it displays a message that says the component size does
not match branch table. So the size is available - its part of my size
ranges in the catalog, but the branch table prevented me from
placing it. The branch table worked as it should.
17. You should go through all of these steps and verify this works on
your system, and then we'll continue after that.
2. Next I'll click on the Setup button. Click current drawing and set the
drawing mode to 2D double line. Well use that setting in this
example. Well create a profile for an in-line component, and the
system will revolve it around a center line later. It will also create a
3D solid from it as well.
3. You'll see how this works soon. Next click on Specification/Size and
click browse. Select Project1, and then set the spec to A20_M. The
main size will be 10-inch. Click Apply & Close.
4. We'll draw a couple of flanges that we can use for construction lines
to make our custom shape. I'm going to click the RFWN flange.
Place the face end first and drag out to the right and click for the
butt weld end direction.
PipingDesignOnline.com
5. Next I'm going to put another flange out to the right, with the face of
the flange facing to the right. There will be a distance of 662 between
them. Ill click Flange, and notice the prompt. On my system Ill
need to right-click for buttweld. Ill do that, and then pause the
mouse right on the end of the first flange, but I'm not going to
click. Then I'll just move the mouse to the right, and the system
will start tracking.
6. If you move the mouse back to the first flange and touch it, you lose
the tracking. So make sure you hover right on it initially, don't click,
and the system acquires the point. Drag out to the right and type
662 and press enter. The buttweld end of the flange gets placed at
that point, and then I'll drag out to the right and click. This places
the flange.
7. Now these flanges will serve as the outline for the user shape well be
constructing. Next a polyline will be constructed around the edges of
these flanges. Turn off Ortho turn on Polar. Right click on Polar
and go to Settings.
8. Verify the increment angle is set to 45. Click OK to exit the dialog
box. Type pline to start the polyline command. Next Ill click points
around the edge of the flange. Ill click the first point on the end of
the purple center line, and then just go right around the edge of the
flange. I'll be clicking on these endpoints as I go around it.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
PipingDesignOnline.com
9. Then drag out to the right and type 150. I'm not going to click; I'm
going to just drag out and type 150 and press Enter. From there
slant up at 45 and type 150. Drag the mouse to the right and type
150, come back down at 45 degrees for 150, drag over and click
on the end of that flange. From there click points right around the
edge of the second flange, click each corner and continuing right on
down to the center line again.
Enter for Erase. Cross through the lower part of the flanges and
press Enter, and it'll leave only the polyline outline. This is going to
become a flame arrestor. It's going to become an in-line component
that will have CADWorx intelligence and will end up as part of our
specifications.
3
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
13. In this example, Ill click the down arrow, and click Select Polyline.
This is the technique to use if youre creating an in-line component,
which is symmetrical about a center line. It works very well. You
draw and outline and the system will build a new CADWorx object
for you. So it's a graphical method, and you don't have to do
programming to create a new CADWorx shape like this.
14. Ill click Select, and then click on the polyline. Then we should
notice the prompt. It says, pick insertion points. Click on each end.
The system then asks what kind of end conditions and what kind of
connections do we want to have on each end?
15. It starts with the first end, and it prompts to set the end type at the
connection point. I'll set it for flanges. On the other end, it will be
set for flanges, as well.
16. Other things can be set in this dialog box, such as materials and
densities. Under the weight, I'll enter 300. Under Description, I'm
going to type FLAME ARRESTOR, MODEL 10-35B.
17. And then, finally, I can set up how I want this to appear in ISOGEN.
There's a whole separate set of videos and lessons on how to work
with Isogen, so just use whats shown to make this work for this
example. There are some files that are stored in the CADWorx folder
that are full of ISOGEN reference information.
(CADWorx\Plant\Isogen|Isogen_Utils\)
19. There's one in there that has a diamond shape, and the skey to make
this work is going to be FTFL. What that will do is produce an
Isogen symbol for a flame trap with flanges on each side. So well
use this value. Ive added some illustrations showing where I found
this for your reference information.
20. Click OK and the system will create the new custom component, and
add it to our spec and catalog.
21. To draw it, click on the entry that it created and which appears in
the specview tool palette. Click two points to place it, and you see
we have a CADWorx object placed in our model.
22. If I double click it, I can see that it did put in the weight. It has my
descriptions and everything looks good. Next we'll run it out through
ISOGEN and see what gets produced. First, let's take a look at it from
an angle. I'll click the top on my screen and click on SW Isometric.
23. You can also get a Southwest isometric view by coming down under
the View tab and finding it. Or you go up to the View on the menu
bar, click on 3D Views and get to it as well.
24. Next convert it to a 3D solid. Theres a button you can use on the
CADWorx Plant I tab.
25. Now let's place some components on it, and then we'll have Isogen
produce and isometric. Click Gasket, and hover near the outside
edge of the end circle. Connect the gasket to the end of the purple
center line (make sure you use osnap). Click Flange and press
Enter to connect a flange automatically to the gasket. Next click Pipe
and press Enter to connect it automatically, and drag it out.
26. Having Ortho on, drag out to the right and click, and then turn the
corner with and elbow and click. Press Enter to exit.
27. On the other side of the Flame Arrestor, place a gasket, a flange,
and a piece of pipe.
28. Next well take it through ISOGEN. Click ISOGEN Out. Make
sure that you use a metric inch border. Again, we talk about that in
the first videos covering set up, so see that if you need to get your
Isogen set up. Click OK.
29. Press Enter, then select the objects, and press Enter. The system
will produce the ISOGEN Isometric. When we look at it, we can see
it will have a nice graphic that represents the Flame Arrestor. You can
see that it is piece marked correctly. You can also see the system
included the bolts and gaskets.
30. Looking at the material list, we can see that our components
description showed up well, and also the weight. So it just worked
beautifully. Our new custom component went right through
CADWorx fully intelligent.
SUMMARY
So the ease with which you can create user shapes and custom components in
CADWorx has always been one of its great strengths. It's just so simple. You
create a graphic, and then you can store it within the system. Then, in a few
steps, you can produce a fully intelligent CADWorx component that knows
how to connect to other components and work well in ISOGEN.
A lot of other systems involve programming. Some of them you have to do
Visual Basic scripts to create a component, which can get quite involved.
But CADWorx is really easy. If you can draw it, you can, typically, get it
created as a CADWorx object.
In the next video, we're going to look at a more complex shape. We're going
to look at one that is a 3D shape with multiple connections on it.
PipingDesignOnline.com
5. Cross through the object to select everything and press Enter. The
system prompts for an insertion point. Next, zoom in and select an
end point on the flange centerline.
7. The system prompts what kind of end type is this connection? Click
Flanges. The first connection point has been defined.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
17. Next you can orient it up or down. So the system lets you roll this
object around in different orientations.
18. Drag straight up (with Ortho on) and click. Next we'll place some
components and test it in ISOGEN.
19. Click on a gasket. Click (using Osnap) on the end point of the
purple center line. Place a flange, a piece of pipe, and elbow and
another piece of pipe (see illustration).
22. Construct some pipe and an elbow coming out of the top flange
as in this figure. Be sure and use osnap when youre placing the
gasket on the flange. Also press Enter as you place the components
from the gasket on.
And we can see it worked well. Isogen use a generic skey to show it.
Also, when you check the Bill of Materials youll see that the information is
listed correctly. We were able to make a complex component an intelligent
CADWorx object quite easily.
So again, the user shapes, the custom components in CADWorx are a
powerful and easy to use feature in this software.
2. The first thing we'll do is modify the company catalog. Then we'll set
up the long descriptions within a spec. I've created a document for
you to use as a worksheet, which will get you off to a good start. The
file is part of the files you downloaded as part of this lesson. .
4. This video will be based on a carbon steel A20 spec. For pipe, we'll
use the A106 Grade B. Most of the fittings will be A234 Grade WPB.
Flanges and some of the fittings, like unions or couplings will be
A105.
PipingDesignOnline.com
6. Toggle over to the Spec Editor. Click the Main button and open up
the Company1 Catalog.
Double-click SCH to
open up the table. Right-click in the open area and click Add
Schedule.
9. There are a couple of buttons in the dialog box we can use to add new
entries into this table. The top one will add a new value into the table
for us, and the lower one will delete one. Click the top button and
type 3,000LB (for pounds).
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
10. Click the top button again, and type in 150LB. Click OK.
12. Click the Plus next to Material Tables and double-click MAT. The
table opens. Scroll down and find the A234 Grade WPB.
13. The system lets us specify which components can use certain
materials. In the A234 Grade WPB row, double-click the field in
the COMPTYPES column.
14. A dialog box opens and we can set which fittings can use this
material.
15. Add Laterals and Reducers to this list. And later when we specify
these, we can choose this material for these components.
17. Right-click and Click Insert Row. The system will add a blank row
at the bottom of the list. Type A106 in the blank square, which will
add this as a new material.
18. Enter B for the Grade value. For Composition enter C. Use 0.2830
for the Density.
19. Double click in the space to add components and add Pipe.
20. For Part Number click the heading PTN. It sorts the table based on
Part Number.
21. Looking at this table, if we check the bottom row, we can see that the
part number for the last entry is 0367. So there are 367 entries in this
table. Click in the box (field) for the 106 part number and enter in
0368.
22. Click the PTN header twice. It will sort twice and youll see the 106
in the last row.
23. When you add rows to tables sometimes youll see a message that it
already exists. This can be a problem if you want variations of it,
with more than one entry (row) within the table. What you can do in
that case is fill out one of the second or third fields along the row first,
and then enter in the main value (like A106) in the first field. This is
how you can get variations of the same material in your table (maybe
you want an A106 Grade A and an A106 Grade B).
24. Clicking the headers lets you sort these tables in different ways.
Sometimes that can help you find values in them easier.
This is a good point to pause the video. Why don't you get your catalog set
the way we've done in this lesson, and then we'll continue on after that.
2. Open Project1.
4.
5.
Click the plus next to Caps. Select the row of 0.5 to 24. The Caps
open in the spec editor and can now be edited. The Long Description
is not filled out at this time.
6.
7.
PipingDesignOnline.com
8.
One issue with entering in a text string for a long description is that it
can change from person to person. Each designer who creates
specifications may alter them slightly based on his personal opinions.
This can lead to inconsistency. In this newer version you can build
long descriptions by putting together a sequence of data fields from
the tables. Then the system will produce a consistent description for
you, based on whats in the data files. It will automatically fill in
values, and youll end up with a good long description that is
consistent in its format. The way you go about doing this is really
quite interesting.
9.
Click the box with dots in it top open a dialog box. Click the Down
Arrow and we can then see a list of all the different tables that are
available to us. If you click one of these tables, you'll be able to see
the fields that are inside that table. What we'll be doing is bringing
some of these fields across and combining them. The system will put
them one after the next into a string that would fill out and become
our long descriptions. And that's what will appear in our bill of
materials.
10. Click on the first table listed, click the first field and click the
arrow that goes across. This will give us the first item that begins our
long description, and it's going to say Caps.
11. Where is shows the format, click after the field name, type a comma,
space, and type S/. This will be a user string were adding.
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
19. Later if you're doing a higher pressure spec, or a spec that has exotic
materials in it, you would be choosing those. This same long
description sequence of fields and user strings would work. It would
just use these new values (different Schedules and Materials) your
long description would be automatically built.
21. Toggle back to CADWorx, and make sure you start a drawing
using a template.
23. Select Project1 and the A20 spec. Set the size to 10 inches. Click
Apply and Close.
25. Review the long description. It should say CAP, S/STD, ASTM
A234 GR WPB.
So this process works well. Why don't you go ahead and make this
happen, and we'll continue on after that.
4. Copy the New Version string from the document. You can
highlight it and do a Control-C to copy it to the clipboard. Its
COMPTYPE_CMP_TBL, S/MAINSCH_SCH_TBL, ASTM
SPEC_MAT_TBL GR GRADE_MAT_TBL .
5. In the spec editor, paste this into the long description box (you can
use a Control-V to paste it).
Material: A234-WPB
PipingDesignOnline.com
8. We'll do another one. We'll scroll down and we'll click Pipe. This is
going to be a little more interesting because something got added to
this. I'm going to click the plus next to Pipe and we'll select the
entry.
9. In the earlier versions the long description for pipe was PIPE, S/STD
SMLS, ASTM A-106 GR B.
10. The current versions will use fields and user strings like we did in
earlier example. Also, for pipe, well include the thickness. Well do
this to illustrate how you can bring in fields from different tables and
show them in the material list. The string that goes in the description
box is this: COMPTYPE_CMP_TBL, SCH MAINSCH_SCH_TBL
SMLS, ASTM SPEC_MAT_TBL GR GRADE_MAT_TBL,
MAINTHK_THK_TBL THK. At the end you can see the field for
the thickness and the user string THK.
11. Copy it from the Word document and paste it in to the Long
Description box in the spec editor.
14. Click Save. Go back into CADWorx. Start a new drawing using a
metric template (if you dont have one open at this time).
2
Copyright 2012 All Rights Reserved CAD Training
Technologies, LLC
17. Click Pipe, click a couple of points to place it in the drawing. Press
enter to exit that.
18. Double click it and check the description. Youll see that it has a
good description and it includes the thickness as part of it.
19. The thickness value came from the Thickness table in the spec editor.
I used the first field in the table to generate that thickness value which
came out in the long description.
So you see, you just have a lot of variation of possibilities in this. Once you
get this set up you can use it for a variety of specs and achieve consistent
results.
So thank you for taking the time to go through these videos on the new
CADWorx specifications editor. I hope they were interesting and beneficial,
and most of all, I hope they save you a lot of time in your work!