Professional Documents
Culture Documents
INTRODUCTION
Workflow
1. Build a model using Revit Wall functionality
2. Create wall types with layers assign materials
3. Split walls into prefabricated segments using Revit Split Element functionality
4. Write unique marks to wall Mark parameter
5. Modify wall joins using Revit Wall Joins functionality
6. Wall+ Load Families and Schedules
7. Wall+ define Framing Configuration
8. Wall+ map wall types with framing configuration using Wall Link
9. Wall+ frame walls
10. Wall+ make stud alignment and add additional elements if needed
11. Wall+ define Shop Drawing Configuration
12. Wall+ make shop drawings for one wall using Create Frame Assembly
13. Wall+ sort frame members
14. Add shop drawing views into the sheet for one wall and save it as a template for the future walls
15. Wall+ make shop drawings for other wall segments
Picture 1
Picture 2
Picture 3
Note:
For knee walls to work as expected,
wall function has to be set to Exterior.
If wall is left unattached to roof, top
plate of that wall will always be
horizontal.
Wall+ families
AGACAD provides sample, the most popular framing and connection
families together with Wall+ software. Default Metric and Imperial
libraries are located here:
C:\Users\user name\AppData\Roaming\TOOLS 4 BIM\2016 (or other
version) \Wall+\16.7.50824.0 (or other version)
\Wall+\Libraries\Metric or Imperial
If you modify these families in the future then you can hold it in your
company template or place into this catalogue for the new projects.
10
Wall+ families
Each Wall+ structural framing
family has its subcategory
which is used for visual
appearance setting in the
project.
Subcategory
Family Name
Subcategory
Family Name
Wood Stud
Siding Waterproof
Wood Nailer
Log
Opening Axis
Wood Plate
Metal Brace
Wood Brace
Horizontal Siding
M_Wall_Siding Strip_Horizontal
M_Wall_Siding Strip_ST_Horizontal
Vertical Siding
M_Wall_Siding Strip_Rect_Vertical
M_Wall_Siding Strip_ST_Vertical
M_Wall_Siding Strip_Vertical
11
Wall+ configurations
Wall+ framing, numbering, sheathing and shop drawing configurations are saved in C:\Users\user
name\AppData\Roaming\Tools 4 Revit\Wall+2015 Configurations catalogue.
The content from this catalogue can be copied to other users computer if needed.
12
User permissions
To flawlessly work with Wall+ user permissions for Wall+ 2016 (or other catalogue) directory should be set to "Full Control" in
C:\Users\user name\AppData\Roaming\TOOLS 4 BIM\2016 (or other version) \Wall+\16.7.50824.0 (or other version)
\Wall+\Libraries\Metric or Imperial
and
C:\Users\user name\AppData\Roaming\Tools 4 Revit\Wall+2015 Configurations
1.
2.
3.
4.
5.
6.
Go to C:\ProgramData\Tools 4 Revit\
press right mouse click on Wall+ 2015 (or other version) catalogue
Go to Properties
In "Security" tab press "Edit"
Choose the User and Set "Full Control" to "Allow"
Press "OK, "OK"
13
Tip
After framing a wall DO NOT use Undo (Undo button or Ctrl + Z) function, because configuration setting of a wall will be lost.
14