Professional Documents
Culture Documents
Nor was this Force Corp.s first run in with OSHA. The company was cited for workplace
safety violations, specifically around the lack of adequate fall protection, at four different
job sites in 2013.
According to the U.S. Bureau of Labor Statistics, there were 4,679 workplace fatalities in
the United States in 2014, and another 1,157,410 workers suffered on-the-job injuries
Carmoon Group Ltd. Business Insurance Hempstead New York
Page 1
severe enough to require time away from work. Injuries were most prevalent in the
following industries: sheriffs patrol officers; correctional officers and jailers;
firefighters; nursing assistants; construction laborers; and heavy and tractor-trailer
truck drivers. About one in four injuries was due to a slip or fall: In the construction
injury, falls were the leading cause of on-the-job deaths, accounting for nearly 30
percent of all workplace fatalities.
Avoiding Workplace Safety Violations
In 2012, in partnership with the National Institute for Occupational Safety and Health
and NIOSH's National Occupational Research Agenda program, OSHA implemented a
comprehensive education and training program to help construction employers
minimize on-the-job falls. The campaign provides employers with information and
educational materials on how to provide the correct fall-protection equipment for
workers and train them in its use.
At the same time, OSHA also created standards that outline safety measures employers
must put in place when employees are working at heights of 6 feet or more. The
standards also mandate protection from falling objects, tripping over or falling through
holes, and protection when working around dangerous equipment, regardless of height.
(Fall protection is required, for example, if a worker is working above belts, pulleys,
gears or vats of corrosive materials.)
OSHA standards mandate specific protections for various situations. Some of these
include:
Leading edge: Each worker constructing a leading edge 6 feet or more above a lower
level must be protected by guardrail systems, safety net systems or personal fall arrest
systems.
Low-slope roofs : When doing roofing work on a low-slope roof that has one or more
unprotected sides 6 feet or more above ground level, workers must be protected from
falling by:
Page 2
Guardrail systems
To find out more about avoiding workplace safety violations, review OSHAs
publication Fall Protection in Construction which provides information about different
types of fall protection systems and the types of workers who are most at risk.
Additionally, the online resource, Stop Falls, offers fact sheets, posters and videos that
illustrate fall hazards in the construction industry and outline appropriate preventive
measures.
As an employer, you are responsible for keeping your workers safe. Although no
workplace is 100 percent hazard free, you can eliminate workplace safety violations by
adhering to OSHA guidelines and implementing a comprehensive safety program
involving all of your employees.
Not sure how to get started? Contact one of our construction insurance experts, who can
help you assess your risk and make a plan. Call us at 516-292-3780, Monday through
Friday from 9 a.m. to 6 p.m. to set up an appointment, or request a free
consultation online today.
Page 3