Professional Documents
Culture Documents
1. MONITOR LED IS BLINKING Check all the connections like Monitor Cable, Data cables,RAM, Display
Card , CPU connections.
2. CONTINUOUS THREE BEEPS
Problem in RAM Connection.
3. THREE BEEPS ( 1 Long 2 Short)
Problem in Display Card Connection
4. THREE LONG BEEPS PERIOD WISE
Problem in BIOS or RAM (Basic Input Output System)
5. CONTINUOUS NON-STOP BEEPING
Key Board Problem (I.e.;Some Key is pressed for Longer time)
6. FDD LED IS GLOWING CONTINUOUSLY
Data cable to be connected properly (twisted cable).
7. NO DISPLAY ON THE SCREEN AT ALL
Hard Disk cable connected wrongly. Connect rightly seeing the Red mark (Faces power supply)
and then Restart.
8. POWER LED IS OFF
Check main power cordb. Check S.M.P.S.
Check Mother Board connection
9. SHOWING CMOS ERROR
Replace 3 Volt battery of Mother Board . Set original Settings Manually.(Refer CMOS Setup
chart)Enter your search terms.Submit search form.
10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
Check Power cord of FDD , Data Cables , set CMOS & Finally the Check drive.
11. SHOWING HDD ERROR OR HARD DISK FAILUREa. Check Power Cord
b. Check connection of HDD
c. Check Data cable
d. Check Hard Disk parameters in CMOS or Auto detecting
Setting Partitions by Fdisk Command, then format it to set track 0.
12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLYa.
Check S.M.P.S
RAM not functioning properly.
c. Software problem (due to usingpirated software)d. CPU fan not functioning properly.