Professional Documents
Culture Documents
Alptec 2444i
Installation Note
Included: First steps with the WINALP2400 software.
ALPES TECHNOLOGIES
Order no.:
Version:
InstallationNoteAT2400i_rev2.1E.doc
English
Contents
Contents
1
Warranty........................................................................................................................... 42
Recalibration..................................................................................................................... 42
ALPTEC 2444i
POWER QUALITY ANALYZER
Contents
10
Maintenance...................................................................................................................... 43
10.1 Replacement of internal parts .................................................................... 43
10.2 Error messages ......................................................................................... 43
10.3 Problem with the modem ........................................................................... 44
10.4 Replacement of batteries........................................................................... 44
10.5 Replacement of fuses................................................................................ 44
10.6 Cleaning .................................................................................................... 44
11
12
13
14
Definitions ......................................................................................................................... 50
15
Documents ......................................................................................................................... 51
16
Templates .......................................................................................................................... 51
ALPTEC 2444i
POWER QUALITY ANALYZER
Symbol
...
...
...
or
...
Text formats
Format
Detail
ALPTEC 2444i
POWER QUALITY ANALYZER
Description
... identifies a requirement.
This requirement must be met before you can
proceed with the task described in this section of
the text.
... identifies a mandatory action.
You are requested to carry out a specified task.
... identifies a mandatory action to which there is
an alternative procedure. The alternative
procedure is introduced with " or " or by a left
indent.
... identifies general information and hints.
In the related section of the text, you find
important information regarding a certain system
feature or procedure.
... ... identifies important information.
The related information and instructions must
always be strictly followed.
... identifies a warning relating to a risk to life and
limb from electric shock.
If the instructions are not strictly adhered to,
there is an inevitable risk to life and limb.
... ... identifies a warning relating to a potential
risk or dangerous situation.
If the instructions are not adhered to, there is a
risk of death, injury or damage to property.
Description
Names of software and operating elements,
lettering on the device as well as numbers and
text shown on the display are printed in italics.
Protection class
Qualified people
Safe operation
Ensure that all persons using the device have read and
fully understood the operating manual and safety
instructions.
The device may only be used under certain ambient
conditions. Ensure that the actual ambient conditions
conform to the admissible conditions laid down in chapter
"Technical Data".
During operation, ensure that the cooling vents (if exist)
are not obstructed in order to prevent heat accumulation
inside the housing.
Prior to any manipulation of the device, shut off all the
electrical sources connected to the device.
Proper use
Do not use the device for any other purpose than the
measuring of voltages and currents that are within the
measuring ranges and categories, including voltage to
earth, laid down in chapter "Technical Data".
Improper use shall void all warranty.
Electrical
connections
ALPTEC 2444i
POWER QUALITY ANALYZER
Risks during
operation
Maintenance and
repairs
Accessories
Shutting down
ALPTEC 2444i
POWER QUALITY ANALYZER
Type:
Hardware revision code:
Serial number:
Power supply:
Frequency:
Protection class:
MEASUREMENT
Nominal Voltage:
Voltage precision:
Nominal Current:
Current precision:
CE
Made in France
ALPTEC2444i
XX
xxyyyxxxxx
190-264VAC 240-360VDC 20VA
50Hz
IP52
4 x 230V
0.1%
4 x 5A
0.5%
Power supply from The battery charge begins automatically when the power is on.
battery
When the power shut down, the battery will automatically power
the device for 15 minutes (option 30 minutes).
Input voltage
Input current
Servicing and
maintenance
IP 52
ALPTEC 2444i
POWER QUALITY ANALYZER
3.1 Terminals
Memory card
USB Port
ALPTEC 2444i
POWER QUALITY ANALYZER
RS232 Port
Serial Number
IP address for
Ethernet model
Battery location
10
ALPTEC 2444i
POWER QUALITY ANALYZER
1.
2.
3.
4.
ALPTEC 2444i
POWER QUALITY ANALYZER
11
Passwords:
Administrator password: 00000000
User 1 password: 00000000
User 2 password: 00000000
Histograms:
Voltage: 200 to 250Vrms
Power Factor: 0,5 to 1
Frequency: 49,5 to 50,5Hz
Other parameters: auto mode
Ripple control:
Filter status
Telecom n1
( Pulsadis )
On
Applied to inputs:
V1, V2, V3
V1, V2, V3
On
40
On
50
Frequency (Hz)
175
188
Parameter
Telecom n2
On
Bandwidth (Hz)
0,6
0,6
0,9
0,9
2,75
0,5
1,5
0,5
12
ALPTEC 2444i
POWER QUALITY ANALYZER
ALPTEC 2444i
POWER QUALITY ANALYZER
13
4.2 Installation
Before cabling the device, be sure to understand correctly the
specifications described in this section.
Installation
n
e
d
.ifro
ty
E
T
u
A
x
!
14
ALPTEC 2444i
POWER QUALITY ANALYZER
4.2.1
Source
L1
L2
L3
Load
ALPTEC 2444i
POWER QUALITY ANALYZER
15
4.2.2
Source
L1
L2
L3
Load
16
ALPTEC 2444i
POWER QUALITY ANALYZER
4.2.3
RS232 point to
point
Embedded modem
External modem
Ethernet
ALPTEC 2444i
POWER QUALITY ANALYZER
17
Battery
18
ALPTEC 2444i
POWER QUALITY ANALYZER
Ordinateur (PC)
Pentium IV (Minimum)
520 MB RAM (Minimum)
Serial port RS232
Ethernet Port RJ45
10 GB of free space for the hard disk
CDROM Reader (for installation)
Microsoft Windows 98, 2000, NT, XP, VISTA
KORTEX Novafax 56000 modem
ALPTEC 2444i
POWER QUALITY ANALYZER
19
20
ALPTEC 2444i
POWER QUALITY ANALYZER
5.5.2
To make apersonnalisation
of histograms
To define the triggers to
records waveforms
ALPTEC 2444i
POWER QUALITY ANALYZER
21
Icons
The description of the fonction:
22
ALPTEC 2444i
POWER QUALITY ANALYZER
ALPTEC 2444i
POWER QUALITY ANALYZER
23
5.7.2
24
ALPTEC 2444i
POWER QUALITY ANALYZER
ALPTEC 2444i
POWER QUALITY ANALYZER
25
RMS table
26
ALPTEC 2444i
POWER QUALITY ANALYZER
Symmetrical
components
This tool is made to check the phase angle and the phase orders
The software displays the 3 voltage phase and the 3 current phase
(at the top left windows)
Scope meter
This tool displays the waveform of the voltage and the current as a
real scope meter.
It is possible to select 3 different ways of display.
ALPTEC 2444i
POWER QUALITY ANALYZER
27
28
ALPTEC 2444i
POWER QUALITY ANALYZER
5.8.2
ALPTEC 2444i
POWER QUALITY ANALYZER
29
5.8.3
30
ALPTEC 2444i
POWER QUALITY ANALYZER
Data analysis
6 Data analysis
This manual wont give all the possibilities for the analysis. Below
you will find some example.
6.1 Events
One event may be a dip or a swell, an interruption or another
magnitudes out of the limit (frequency, harmonic, flicker). This data
is associated with its measuring point, its event type, its beginning,
its channel, its extrmum and its length.
ALPTEC 2444i
POWER QUALITY ANALYZER
31
Data analysis
Liste
The list option will display a listing of all the event with their
main characterization (the measuring point, the event type,
the beginning, the channel, the extrmum and the length).
The selected event display the shape on the bottom table.
32
ALPTEC 2444i
POWER QUALITY ANALYZER
Data analysis
tableau
dure/profondeur
ALPTEC 2444i
POWER QUALITY ANALYZER
33
Data analysis
ITIC
34
ALPTEC 2444i
POWER QUALITY ANALYZER
Data analysis
ALPTEC 2444i
POWER QUALITY ANALYZER
35
Data analysis
% give the % of the total duration (day, week or month) where the voltage was out of the limits.
The total duration is egal to the intervals multiplied by the number of these intervals (here144 x
10 min for 24Hrs).
During an event the correspondent intervals are excluded from the quality counters
tables.
It is also possible to display the over limits graphically
36
ALPTEC 2444i
POWER QUALITY ANALYZER
Data analysis
ALPTEC 2444i
POWER QUALITY ANALYZER
37
Data analysis
38
ALPTEC 2444i
POWER QUALITY ANALYZER
Data analysis
ALPTEC 2444i
POWER QUALITY ANALYZER
39
Data analysis
40
ALPTEC 2444i
POWER QUALITY ANALYZER
Data analysis
With the right click a pop up menu will appear in order to give
some option for the display.
ALPTEC 2444i
POWER QUALITY ANALYZER
41
7.2 Storage
8 Warranty
The warranty period for faultless operation and compliance
with the specified uncertainty of measurement is limited to 2
years from the date of purchase.
The warranty is only valid if accompanied with the respective
invoice or receipt of payment.
Not covered by warranty are damages due to improper use,
overload or operation under conditions that are outside the
range of permitted ambient conditions.
Warranty covers only technical data that is specified with a
tolerance range. Values or limits for which there are no
tolerances specified are intended for information purposes
only.
Mise en forme : Puces et numros
9 Recalibration
ALPES TECHNOLOGIES recommends recalibrating the
device every 2 years. The device can be calibrated by the
ALPES TECHNOLOGIES service department or any other
calibration specialist. Refer to the Calibration Application Note.
Mise en forme : Puces et numros
42
ALPTEC 2444i
POWER QUALITY ANALYZER
Maintenance
10 Maintenance
The device is maintenance-free.
Status Led:
Mem Led:
Com Led:
Boot sequence:
Power Led green: Device is powered,
ALPTEC 2444i
POWER QUALITY ANALYZER
43
Maintenance
n
e
d
.ifro
ty
E
T
u
A
x
!
10.6 Cleaning
Do not wash the device with water.
The device housing can be cleaned with an isopropanol-soaked
rag.
44
ALPTEC 2444i
POWER QUALITY ANALYZER
Housing
ALPTEC 2444i
POWER QUALITY ANALYZER
45
Technical Data
12 Technical Data
English
Display:
Configuration:
Quality System:
Calibration:
Precision:
Calibration:
23C 1C.
230 Vrms / 50 Hz 0.1 Hz / 3 Arms 50 Hz 0.1 Hz.
Stabilization interval: 10 minutes.
Star connection.
Environmental
conditions:
Protection class:
ALPTEC 24xxi
Type:
Size:
Weight:
Portable device.
245 x 245 x 95 mm
3,2 kg
EMC
Emission:
Power Supply
Working range:
Option 1:
Option 2:
46
Standard
AC: 190 TO 264 Vac (50Hz, 60Hz).
DC: 240 to 360 Vdc.
Lead acid internal battery (12V/1,2Ah), autonomy: avg. 30 min.
Consumption: 27 VA (100 VA during charging period.
48 VDC: range 38 to 74 Vdc.
Without battery.
Consumption: 25VA max.
127 Vdc: range 68 to 158 Vdc.
Without battery.
Consumption: 25VA max.
Ground isolation:
Test voltage:
1,5 KV.
ALPTEC 2444i
POWER QUALITY ANALYZER
Technical Data
Voltage inputs
Inputs:
Connection:
Star or Delta.
Input range:
Full scale:
1150 V peak.
Over voltage:
2 kV (continuous).
Amplitude:
Input Impedance:
Rated current:
5 Arms.
Full range:
14 A peak.
Over current:
3 x I rated (continuous).
Consumption:
0,01 VA.
Frequency:
Sampling frequency:
Flicker :
Voltage Harmonics:
Measurement range :
H2 H51.
Recorded data: 200 msec, 10 min, 1 h, 24h.
Following IEC-61000-4-7 Class I.
Class A following IEC-61000-4-30.
Current Harmonics:
Measurement range :
H2 H51.
Recorded data: 200 msec, 10 min, 1 h, 24h.
Following IEC-61000-4-7 Class I.
Class A following IEC-61000-4-30.
Imbalance:
True Power:
Reactive Power:
Distortion Power:
Standard references
EN 50160 Voltage characteristics of electricity
ALPTEC 2444i
POWER QUALITY ANALYZER
47
Technical Data
Standards Compliance
IEC 61000-4-30 Electromagnetic compatibility (EMC) - Part 4-30: Testing and
measurement techniques - Power quality measurement methods
IEC 61010-1 /2001 Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements.
IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields.
IEC 61000-4-7 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement
techniques - General guide on harmonics and interharmonics measurements and
instrumentation, for power supply systems and equipment connected thereto.
IEC 61000-4-15 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 15: Flickermeter - Functional and design specifications.
IEC 61036 Alternating current static watt-hour meters for active energy (classes 1 and 2)
IEC 61268 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
73/23/EEC EC Low Voltage Directive
89/336/EEC EMC Directive
See the Type test document for other standards compliance.
48
ALPTEC 2444i
POWER QUALITY ANALYZER
Optional extras
Accessories
Software
Product
ALPTEC 2444i
Product
Ethernet
Modem
GSM Modem
Product
NOVAFAX
56000
GPS
Product
WINALP2000
WINALP2000 Software
ServerBridge
13.2 Service
Service
Product
ALPTEC 2444i
POWER QUALITY ANALYZER
49
Definitions
14 Definitions
CBEMA-Curve
ITIC-Curve
Coverage
(statistics)
Device
DISDIP
Electrical
variable
Event
Histogram
Permanent
recording
Power Quality
(PQ)
Triggered
recording
User
Ans
50
ALPTEC 2444i
POWER QUALITY ANALYZER
15 Documents
Ethernet Application Note
USB Application Note
Calibration Application Note
Firmware Update application Note
Modem Application Note
Embedded Website Application Note
16 Templates
Default SITE
Communication model
Communication model
Communication model
Communication model
Modem model
Download model
Download model
Download model
Network
Com1Dir
Com2Mod
Com3USB
ETHERNET
MODEM
3U3I
3U
All
General Site
RS232 on COM1
GENERIC1 modem COM2
USB COM3
ETHERNET TCP SOCKETS
GENERIC2 modem commands
3U 3I 10 minutes and 1 hour
3U 10 minutes and 1 hour
All data
ALPES TECHNOLOGIES
Alptec 2444i
Right to change specification reserved /
Technische nderungen vorbehalten /
Sous rserve de modifications /
Nos reservamos el derecho a
modificaciones tcnicas sin previo aviso /
Tutti i diritti di variazione riservati
Printed in France / Gedruckt in Frankrijk / Imprim en France / Impreso en Francia / Stampato in Francia