Professional Documents
Culture Documents
Multi-purpose,
compound
acrylic
resin,
curing
Uses
Specification
Properties
Form
Cure times at 20C and
50% relative humidity:
Tack free
Full cure
Curing Efficiency
(BS 8110: Pt 1: 1985)
Water Loss
(ASTM C309)
Liquid
:
:
2 to 4 hours
24 hours
>75%
0.28 kg/m
Preparation
Cureseal should be gently stirred immediately prior to use to
ensure uniformity of the material as applied.
New concrete
Application to freshly placed concrete should not begin until
the surface is free from water, and should not commence at all
if bleed water is apparent. Cureseal should be applied as soon
as practically possible after removal of shuttering, and whilst
the concrete surface is still damp. However, any traces of
laitence, grout runs or loose material should be removed.
Application
Cureseal should be applied uniformly by brush, roller or spray,
with no overlap of applications. Under standard site
conditions, a single coat of Cureseal applied at a uniform
rate of 4.5 to 6 m2 per litre, will meet ASTM C309 curing
requirements.
The applied film should not be trafficked until fully dry, and
care should be taken to ensure that the film is not broken.
Spray equipment
Cureseal
Cleaning
Storage
Subsequent finishes
The resin used in Cureseal allows direct application of many
floor coverings and paint systems, as given typically below:
-
Estimating
Supply
Cureseal
Fosroc Solvent 102
:
:
20 litre packs
5 litre packs
Coverage
Coverage figures quoted for Cureseal are indicative; and based
upon application to fresh or damp concrete at the appropriate
time. Care should be taken to ensure that the concrete is
indeed ready to accept the curing membrane.
Application rates outside the range given below may be used
if necessary, but it is recommended to first contact your local
Fosroc office.
Cureseal
Technical support
Cureseal - Page 2 of 4
Precautions
Additional Information
Fire
n fluid micro-concretes
Flash points
Cureseal
40C
33C
Cureseal - Page 3 of 4
General purpose
Concure WB
n water based curing compound > 80% efficiency
n economic answer to curing problems
Concure RB90
n resin based curing compound > 90% efficiency
n cost effective, high performance
Dual purpose
n General purpose
Concure WB
Concure RB90
n Dual purpose
Concure DPM
Cureseal
DUBAI
ABU DHABI
SHARJAH
BAHRAIN
KUWAIT
OMAN
QATAR
Al Gurg Fosroc
Al Gurg Fosroc
Al Gurg Fosroc
YBA Kanoo
Boodai
GETCO
Tadmur
TEL : 738200
FAX : 732828
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of
which may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing,
it is the customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product
is suitable for the intended application, and that the actual conditions of use are in accordance with those recommended. Becau se Fosroc has no control
over the conditions of use of its products, all recommendations or suggestions regarding the use of these products are made wit hout guarantee.
www.fosrocgulf.com
UAE/0235/01/B