Professional Documents
Culture Documents
230. In X-rays:
a) if thickness is more the blacking is less long on the film
b) thickness of metal as referred to hose density
c) sensitivity of the radiography is determined by TQT
d) all of the above
172. In NDT magnetic particle inspection cannot be done if the coating of
a) copper
b) tin
c) nicel & chromium
d) zinc
147. The NDT radiography method the density means
a) degree of blackness
133. In NDT inspection, performance of magnetic particle inspection can not effected by
a) cadmium
b) copper
c) tin & zinc
d) all of the above
124. The NDT check inspection is made in white light and dye used is
a) gray
b) red
c) black
d) all are correct
98. Optical instrument used to inspect the interior structure of a component is
a) fluroscope
b) foroscope
c) indoscope
d) all of the above
81. Radiography depends on
a) size of & shape
b) X-ray
c) Thickness of material
d) All of the above
77. The check interior surface condition of cylinder and surface instrument used is
a) boroscopre
b) fluroscope
c) endoscope or introscope
d) all of the above
50. In floroscent dye penetrant test the colour of the light use in the part inspected
a) green color in black light
b) green color in white light
c) ultra violet in white light
d) red color in white light
41. X-ray used in indity inspection
a) have short wave length high protecting power
d) None
170. Which is not use done composite
a) dyepenetant
b) X-ray
c) Ultra sound method
d) Radiography
19. X-ray used in NDT inspection:
a) have short wave length high penetrating power
b) have long wave length low penetrating power
10. In a dye penetrant test before applying developer, what shall be done
a) dye should be completely flushed out
b) only excessive dye should be removed
c) the rinsing operation is completely carried out
d) both b & c are correct
1.
2.
3.
4.
lateral defect
longitudinal defect
transaction defect
all
c) passing the a.c. to the part and reduce the current to zero
d) all are correct
50. In NDT, satisfactory performance of magnetic particle inspection cannot be find in
a)
b)
c)
d)
Cd
Cu
Sn & Zn
None
1.
2.
3.
4.
5.
6.
crack
discontinuities
corrosion
none
. Which is unpaired
a)
b)
c)
d)
20. In ultrasonic test, when mechanical stress vibration is applied to crystal quartz then these are
a) electrical energy and voltage are produced
b) more vibrations are produced
c) as in (A) and varies with the thickness of crystal
d) none
21.Heat treated defect in metal is detected by
a)
b)
c)
d)
ultrasonic test
eddy current testing
dye penetrant testing
radiography testing
Staining rate
Staining speed
Staining extent
All
In radiography NDT, which of the following factor does not affect the test:
a) Distance of film and exposure angle
b) Time
c) Material thickness, density, shape & size
d) Film characteristic
2.
MPI
As in a but DPI is more efficient
Both are equally efficient
None
equipments are rated by (9A-479)
a) ampere
b) KV
c) Watt
None
1.
c) non-porous material
d) all
2.
Defect is surface & subsurface:
a) ultra sonic
b) eddy current
1. In composite impact damage & water disband is inspected by
a) thermal halograph
b) laser halography
c) ultrasonic
x-ray
2. In radiography, density defined as
a) relative of two adjacent area brightness
b) degree of blackening of radiograph
c) both a & b
1. Ultrasonic flaw detection technique is used to detect:
a) Flaws and inclusions in cast metal
b) Flaws or cracks in welded structure
c) Delamination in bonded structure
d) All are correct
1. Ultrasonic test
a) ferrous
b) non-ferrous
c) all material
d) ceramic
20. Fatigue crack detected by:
a) Ultrasonic
b) Magnetic particle inspection
c) Eddy current
d) All of the above