You are on page 1of 3

05990577

Page 1 of 3

DET NORSKE VERITAS


TYPE APPROVAL CERTIFICATE
CERTIFICATE NO. S-5264
This Certificate consists of 4 pages
This is to certify that the

Lifting Sets for Offshore Containers


with type designation(s)

Master Links and Master Link Assemblies, Type M and


MT
Manufactured by

GUNNEBO INDUSTRIER AB
RAMNS, Sweden
is found to comply with
DNV 2.7-1 Offshore Containers
EN 12079-2 Offshore containers and associated lifting sets Part 2: Lifting sets Design,
manufacture and marking
EN 1677-4 Components for slings - Safety - Part 4: Links, Grade 8
IMO/MSC Circular 860
Application
Grade 10 Links
for
Lifting Sets for Offshore Containers
Place and date
Hvik, 2008-06-04

http://exchange.dnv.com/taridocs/TA-CERT/41/05990577.htm

This Certificate is valid until


2012-06-30

13/08/2008

05990577

Page 2 of 3

for Det Norske Veritas AS

Marianne Strand

Valderhaug
Head of Section

Local Office

Anders Kirste Egge

DNV Stockholm

Surveyor

Product description
Links for use in Lifting Sets for Offshore Containers certified to DNV 2.7-1 Offshore
Containers.
Detailed product information and range of certified products covered by this Type Approval
are listed in Appendix 1 of this Type Approval Certificate.
Application/Limitation
For application of links the minimum Working Load Limit (WLL) shall be decided according
to the strength requirements for lifting sets on offshore containers as given in DNV 2.7-1
Offshore Containers, Chapter 8.
Tests to be carried out:
- Production testing: According to DNV Standard for Certification No. 2.7-1 and EN
standard EN 1677-4 "Components for slings Safety - Part 4; Links, Grade 8" in
agreement with the DNV surveyor.
- Material to be impact tested by Charpy impact method according to DNV 2.7-1
Offshore Containers, Chapter 8.4.
All products manufactured according to this TA shall be inspected by a DNV surveyor, and in
addition the DNV surveyor shall witness the production testing and issue certificates for each
batch, according to DNV 2.7-1 Offshore Containers, Chapter 8 and Appendix K.
Alternatively, based on a Manufacturing Survey Arrangement (MSA) with DNV, the
certificates may be issued by the manufacturer according to DNV 2.7-1 Offshore Containers,
Annex 1.
Type Approval documentation
Tests carried out
Prototype strength tested according to Rules.
Marking of product
Marking should be according to DNV 2.7-1 Offshore Containers and approved drawings.
Certificate retention survey
As agreed with the local DNV office, but intervals not to exceed 4 years.
END OF CERTIFICATE

http://exchange.dnv.com/taridocs/TA-CERT/41/05990577.htm

13/08/2008

05990577

Page 3 of 3

Appendix 1
Product description and details
Master links type M (dwg T00036/P01):
Type

Dia.

M-1310-10 OFFS
M-1613-10 OFFS
M-281-10 OFFS
M-19-10 OFFS
M-321-10 OFFS
M-381-10 OFFS
M-32-10 OFFS
M-3226-10 OFFS
M-3632-10 OFFS
M-13-10- OFFS
S-16 OFFS

[mm]
22
25
28
30
32
38
45
50
55
19
32

WLL
[t]
7,8
10,6
10,6
11,9
14,1
20,9
33,0
44,0
55,0
5,4
14,6

MPF

Min. BF

[kN]
191
260
260
292
346
513
809
1079
1349
132
358

[kN]
306
416
416
467
553
820
1295
1727
2158
212
573

Master link assemblies type MT (dwg T00037/P01):


Type

WLL
[t]

MT-9-10 OFFS
7,8
MT-281-10 OFFS 10,6
MT-321-10 OFFS 14,1
MT-381-10 OFFS 20,9

MPF

Min. BF

[kN]
191
260
346
513

[kN]
306
416
553
820

Notice: This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate
invalid.
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det
Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an
amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2
million.In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers,
employees, agents and any other acting on behalf of Det Norske Veritas.

DET NORSKE VERITAS AS VERITASVEIEN 1, 1322 HVIK, NORWAY TEL: (+47) 67 57 99 00 FAX: (+47) 67 57 99 11

http://exchange.dnv.com/taridocs/TA-CERT/41/05990577.htm

13/08/2008

You might also like