Professional Documents
Culture Documents
INGENIERIACIVIL
CATEDRA:MECANICA EFLUIDOS II
CATEDRATICO:ING. ABEL MUNIZ PAUCARMAYTA
INTEGRANTE:HUACHO AYALA CLENIN FELIX
CODIGO:2012200816K
2012
UNCP
INGENIERIACIVIL
CONTENIDO
1
MARCO TERICO
Vertedores:
4.1
4.1.1
Vertedor rectangular:
4.1.2
4.1.3
4.1.4
Vertedor Parshall.
CALCULOS Y RESULTADOS
CONCLUSIONES Y RECOMENDACIONES
ANEXO
RESUMEN
La Hidrometra se encarga de medir, registrar, calcular y analizar los volmenes de agua
que circulan en una seccin transversal de un ro, canal o tubera. En forma clsica, se
define la hidrometra como la parte de la hidrologa que tiene por objeto medir
el volumen de agua que pasa por unidad de tiempo dentro de una seccin transversal de
flujo. El mtodo del flotador se utiliza cuando no se tiene equipos de medicin y para este
fin se tiene que conocer el rea de la seccin y la velocidad del agua, para medir la
velocidad se utiliza un flotador con l se mide la velocidad del agua de la superficie,
pudiendo utilizar s cmo flotador cualquier cuerpo pequeo que flote.
ABSTRACT
In everyday life, many problems arise when designing a channel with the maximum or
minimum infiltration hydraulic efficiency. Today there are several methods to design a
channel, we study different methods are analyzed and explained what it is and the
procedure to be followed at the time of design and the necessary parameters to be taken
into account when designing. Because when you design a channel must collect a lot of
information about the materials used, as well as both the floor of the channel bed, besides
the weather resistance of the coating and various rainfall affecting the operation of the
channel.
UNCP
INGENIERIACIVIL
1
MARCO TERICO
Una forma sencilla de aproximar el valor del caudal de un cauce, es realizar el aforo con
flotadores.
Por este mtodo, se mide la velocidad superficial (v) de la corriente y el rea de la seccin
transversal (A), luego con estos valores aplicandolaecuacindecontinuidad, se calcula el
caudal con la frmula:
Q= v A
Para realizar este aforo, se debe escoger en lo posible un tramo recto del cauce de
longitudL.
UNCP
INGENIERIACIVIL
L=v/T
4
4.1
VERTEDORES:
Vertedores de pared delgada.
UNCP
INGENIERIACIVIL
Donde:
C = coeficiente del vertedor cimacio
b = longitud de cresta del vertedor, m
h = carga hidrulica de diseo, m
UNCP
INGENIERIACIVIL
UNCP
INGENIERIACIVIL
5
CALCULOS Y RESULTADOS
1
2
3
PENDIENTE S = 0.5%
CALCULO DE VELOCIDAD
DISTANC TIEMP VELOCID VELOCID
IA (m)
O (seg) AD (m/seg)
AD
PROMEDI
O
1.514
2.21
0.685
0.716
1.514
2.12
0.714
1.514
2.02
0.750
CONCLUSIONES Y
RECOMENDACIONES
UNCP
INGENIERIACIVIL
7
ANEXO
UNCP
INGENIERIACIVIL
BIBLIOGRAFA
FLUJO EN TUBERIAS Y CANALES
UNCP
INGENIERIACIVIL