You are on page 1of 10

Startup Guide

COPYRIGHT
Title, & ownership right, & intellectual property rights in & to eCourseware &
Documentation shall remain in MTC and/or its suppliers. eCourseware is for your
internal use only. The Subscription granted hereunder does not include the right to
sub-Subscription & may not be assigned, by operation of law or otherwise, or
transferred without the prior written consent of MTC. You may not loan, rent, or lease
eCourseware. You acknowledge that eCourseware in source code form remains a
confidential trade secret of MTC and/or its suppliers & therefore you agree not to
attempt to decipher, decompile, reverse engineer, create derivative works of, or
develop source code for eCourseware or knowingly allow others to do so. You also agree
not to alter the registration number or create Subscription files which enable
eCourseware, or to knowingly allow others to do so.

eCNC is a program developed by MTAB Technology Centre Private Limited (MTC),


located in Chennai, INDIA.

MTAB TECHNOLOGY CENTER PVT (LTD)


#133, developed plot
Electrical and Electronic industrial estate
Perungudi, Chennai 6000096.
Ph.: +91-44-43111114
Email Id: enquiry@mtabtrianing.com
Website: www.mtabtraining.com

The eCNC Courseware is an internet based product. eCNC is a web-based eTraining


program that can be accessed with a username and password. You are informed that
the eCNC course access is time limited and subject to the subscriber.
MINIMUM HARDWARE CONFIGURATION Upgrades to eCourseware may require
that you change your hardware configuration in order to be able to use the upgraded
eCourseware.
SUPPORT AND TRAINING The usage eCourseware does not require on-site
installation, technical support, maintenance or training. MTC staff is available via email
enquiry@mtabindia.com to answer questions about the navigation and use of courseware.

Login Procedure:
Step1:
Log on to http://learnosphere-mtab.org
Step 2:
The eCNC login page will look as shown below:

Click here

Step 3:
Enter the given Mail ID and password provided and then clicks the Login button.

Click here

Step 4:
Now, you have successfully logged into your eCNC courseware Home page.

Click here

Step 5:
Click the My profile to edit your profile, change password and messaging.

Click here

Step 6:
Click on Home to see the list of courses assigned to you. Click the first course CNC
Milling in your home page. The list of CNC milling modules are displayed as shown below.

Click here

Step 7:
Select the topic 1 Introduction to CNC and a new tab will open in your browser with
the module. Click Launch course button.

Click here

Step 8:
Module 1 Introduction to CNC opens in new tab as shown. You can access the module
one by one by clicking the available menus and use notes to get the voice over message.

Click here

Step 9:
When you log out of the course, the module will note where you have left off. When you
log in and launch the module next time, the system will prompt you to resume where you
left off or reset the module.

Knowledge Checks:
Knowledge checks are built into each module so that the user can assess their
understanding of the course. Users can repeat knowledge check and assess themselves,
as needed.

UPDATES
This Subscription does not grant users any rights, Subscription, or interest in and to
any modifications, enhancements, or updates to the eCourseware. Updates, if available,
may be obtained by you with a renewal of the Subscription & may be limited in scope. A
registration number (username & password) may be required or supplied by MTC and/or
THE DISTRIBUTOR.

SUBSCRIPTION TERM AND CHARGES


The term of this Subscription commences upon delivery of the eCourseware to you OR
upon the access by you of the eCourseware and is limited by time (period of validity is
indicated in the order) and must be renewed periodically for continuity. This
Subscription is personal to you and may not be transferred without the prior written
consent of THE DISTRIBUTOR. You may login from different computers, however
each user login can be active only on one computer at a time. You shall keep THE
DISTRIBUTOR informed of any permanent changes in the location of the eCourseware
user. A Subscription registration number (User name & password) which enables the
eCourseware may be included in this package, and may be time limited, subject to
payment.

USE RESTRICTIONS
The eCourseware and documentation shall be used exclusively by you, and your qualified
employees, students and consultants. An employee or consultant is qualified only if
she/he has executed an agreement or is otherwise bound to abide by the restrictions.
All reproductions are prohibited. You may not modify or make derivative works or
compilations of the eCourseware. Unauthorized copying of this eCourseware, or of the
written materials included with this eCourseware, is expressly forbidden. You may be
held legally liable for any copyright in violations.

TERMINATION
MTC and/or THE DISTRIBUTOR may terminate this Subscription immediately in the
event of breach of the terms of this Subscription which is not cured within fifteen
(15) days of notice to you. Upon termination of this Subscription, you shall immediately
discontinue the use of the eCourseware and shall within ten (10) days return to MTC all
copies of the eCourseware and Documentation. Your obligations to pay accrued charges
and fees shall survive any termination of this Subscription.

You might also like