You are on page 1of 3

TRS-1100

European Office
12520 East FM 917 • Alvarado, Texas 76009 24050 Grassobbio (BG) Italy • via Zanica 17/O
817.473.2233 • toll-free 800.851.5102 • fax 817.473.9742 tel +39 035 423.2911 • fax +39 035 335.664
www.tesmec.com www.tesmec.it
Digging chain boom top roller
GENERAL HYDRAULIC SYSTEM Hydraulic digging chain adjustment

CHAINSAW Type: Pressure and flow compensated ROCKSAW


Weight: 8’ Boom with 26” cut and Crumbshoe (Load sensing) Hydrostatic: Two pumps and two motors capable of
- 85,000 LB. (38,590 Kg) (Dependent on Auxiliary pump flow maximum: 45 GPM transmitting full engine horsepower
Configuration) (170 L/min.) Infinitely variable digging wheel speeds: 0-800 FPM
Height: w/Cab - 129” (328 cm) Auxiliary pressure setting: 2500 PSI (172 Bar) (0-244 m/min.)
Transport length with Crumbshoe and Oil tank capacity: 100 gallons (378.5 L) Depths: 0-54 (0 cm-137 cm)
counterweight: Oil type: Texaco code 1855, Type F Widths: 6”-14” (15.2 cm-35.6 cm)
6 ft. boom: 35’-2” (10.72 m) Cutters: Rotary carbide tipped 1” (2.5 cm)
7 ft. boom: 36’-4” (11.07 m) CRAWLER DRIVE shank diameter
8 ft. boom: 37’ -6” (11.43 m) OPTIONAL Cutters: Rotary carbide tipped 1-1/2”
10 ft. boom: 39’-10” (12.14 m) Dual path, hydrostatic drive, planetary (3.8 cm) shank diameter
12 ft. boom: 42’-2” (12.85 m) transmissions capable of full counter rotation
Width: 100” (254 cm) With 23-5/8” (60 cm) with single lever steering, single lever direction. ROCK HAWG
Track Pads Infinitely variable speed: Forward and reverse, High Hydrostatic: Two pumps and two motors capable
Range: 0 - 2.77 Mph (4.46 km/hr) of transmitting full engine horsepower
ROCKSAW Low Range: 0 - 1.25 Mph (2.01 km/hr) Integral Infinitely variable digging chain speeds: 0 – 550
Weight: 75,000 LB. (34,020 Kg) parking and service brake: Spring applied, FPM (0 – 168 m/min.)
Height: w/Cab - 150” (381 cm) hydraulic release, wet disc brake Depth: 0 - 22” (0 - 56 cm)
Transport length with Crumbshoe: 34’ (10.38 m) Width: 110.5” (281 cm)
Width: 98-1/2” (250 cm) With 23 5/8” (60 cm) TRACKS Caterpillar D6 digging chain with double chain
Track Pads configuration
Overall Track Length: 138” (351 cm) Cutters: Rotary carbide tipped 1-1/2” (3.8 cm)
ROCK HAWG Track pad type: single, double, or triple grouser shank diameter
Weight: 105,000 LB. (47,670 Kg) Track chain type: Caterpillar 42/325 or equivalent Drum Diameter: 71” (180 cm)
Height: w/Cab - 129” (328 cm) Track chain pitch: 7.98” (202.8 cm) Hydraulic digging chain adjustment
Transport length: 372” (945 cm) Track pad width: 23-5/8” (60 cm)
Width: 110.5” (281 cm) OPTIONS
CONVEYOR
STANDARD FEATURES Work Light Package: 24V, for night use.
CHAINSAW ONLY Laser control system
Pressurized Cab ROPS with air conditioning, Pressure and flow compensated pump with dual
heating, and sound suppression hydraulic drive motors
Creep control: Operator selectable digging Hydraulic conveyor fold * Caterpillar and Cat are trademarks of
pressure, automatic operation Description: Reversible and shiftable Caterpillar Inc.
Stabilizers with adjustable drags on Belt speed: Infinitely variable 0-750 FPM
Chainsaw and Rocksaw models (0-229 M/min.)
Tool box with locking door Conveyor belt width: 30” (76 cm)
Engine doors with security locks Conveyor length: 156” (396 cm)
Fuel and Hydraulic Tank: Aircraft quality locking caps Discharge height: 48-1/2” - 67-1/2”
Gearboxes, Fuel and Hydraulic Tanks: Pressurized (123 - 171 cm)
with 5 PSI filtered breathers Discharge direction: right or left
Flywheel Gearboxes: shaved, helical gearing, case
hardened for extreme shock load DRIVE
Vibration isolator mounts: used on engine, radiator,
oil cooler, exhaust silencer, and cab CHAINSAW
Hydrostatic: Two pumps and two motors capable
ENGINE of transmitting full engine horsepower
Infinitely variable digging chain speeds:
Model: Cat C-10 ATAAC 0 - 700 FPM (0 - 213 m/min.) standard
Description: Turbocharged and After Cooled OPTIONAL: low speeds: 0 – 550 FPM
Maximum gross horsepower: 365 HP (272 kW) (0 – 168 m/min.)
Number of cylinders: 6 In-Line Depths: 6, 7, 8, 10, 12, ft. (183, 213, 244, 305,
Maximum no load RPM: 2,130 366 cm)
Cooling Medium: Liquid Widths: 16” - 20” Single chain (41 - 51 cm) 26”
Cooling Rating: Adequate for 120° F (48.9°C) - 36” Double chain (66 -92 cm)
ambient air temperature Tesmec designed 6.5” pitch digging chain for single
Air cleaner: Dry type, 2 stage with dual precleaner chain configuration
Oil filter: Full flow canister Caterpillar D6 digging chain for double chain
Fuel filter: Primary and secondary configuration
Electrical system: 12V/24V OPTIONAL chain for double chain configuration:
Fuel tank capacity: 266 gal. (1,007 L) Tesmec 4.5” pitch
Fuel consumption at full load: 17.6 gal. /hr. Cutters: Rotary carbide tipped 1” (2.5 cm)
(66.6 l/hr.) shank diameter
Operating range: 15.1 hours OPTIONAL Cutters: Rotary carbide tipped 1-1/2”
(3.8 cm) shank diameter
Tailwheel diameter: 40” (101.6 cm)
TESMEC TRS-1100
Series Specifications
42!.30/24,%.'4(
#/.6%9/20/3)4)/.&/242!.30/24
;CM=

g ;CM=

/),,%6%,
/),$2!).
/),$2!). /),,%6%,

g ;CM= g ;CM=

-/$4  3!%#


/),$2!

'%!2"/8
3%2)!,.²
&),,7)4(77
7!2.).'&!),52%$5%
4/,!#+/&,5"2)#!4)/.
6/)$37!22!.49

/),,%6%,
/),$2!).

g ;CM=
g ;CM= 42!#+
2%#/),
!$*534%2

g ;CM=
'2/5.$,).%
g;CM=
g ;CM=

g ;CM= g ;CM=

g ;CM=
-).#54
3).',%342!.$
g;CM=
-!8#54
$/5",%342!.$
g ;CM= g ;CM=

g ;CM=

g ;CM=
g ;CM=
2%&

g ;CM=
g ;CM=

g ;CM=
g ;CM=

42!#+
2%#/),
!$*534%2

g ;CM=
'2/5.$,).%
g ;CM=

g ;CM= g;CM=


;CM=
-).#54
g ;CM=
-!8#54

g ;CM=
g ;CM=
42!.30/24,%.'4(

g ;CM=

g ;CM=
/),,%6%,
/),$2!).

/),$2!). /),,%6%,

g ;CM=
-/$4  3!%

/),$2!
'%!2"/8
3%2)!,.²
&),,7)4(77
7!2.).'&!),52%$5%
4/,!#+/&,5"2)#!4)/.
6/)$37!22!.49

#

/),,%6%,

/),$2!).

42!#+
2%#/),
!$*534%2

g ;CM=
g ;CM=
'2/5.$,).%

g ;CM= g ;CM= g ;CM=


$)!g ;$)!CM=
$25-$)!-%4%2

03/05 Due to Tesmec's program of constant improvment, materials and specifications are subject to change withough notice or obligation.

You might also like