Professional Documents
Culture Documents
ABSTRACT
Ocean Thermal Energy Conversion (OTEC) is an energy technology that converts solar radiation
to electric power. OTEC systems use the ocean's natural thermal gradientthe fact that the ocean's
layers of water have different temperatures to drive a power-producing cycle. As long as the
temperature between the warm surface water and the cold deep water differs by about 20C (36F),
an OTEC system can produce a significant amount of power, with little impact on the surrounding
environment.
The distinctive feature of OTEC energy systems is that the end products include not only energy
in the form of electricity, but several other synergistic products. The principle design objective was
to minimize plan cost by minimizing plant mass, and taking maximum advantage of minimal warm
and cold water flows. Power is converted to high voltage DC, and is cabled to shore for conversion
to AC and integration into the local power distribution network.
The oceans are thus a vast renewable energy resource, with the potential to help us produce
billions of watts of electric power.
SeminarsTopics.com
The ocean can produce two types of energy: thermal energy from the sun's heat, and mechanical
energy from the tides and waves. Ocean thermal energy is used for many applications, including
SeminarsTopics.com
electricity generation. Ocean mechanical energy is quite different from ocean thermal energy. Even
though the sun affects all ocean activity, tides are driven primarily by the gravitational pull of the
moon, and waves are driven primarily by the winds. As a result, tides and waves are sporadic sources
of energy, while ocean thermal energy is fairly constant. Also, unlike thermal energy, the electricity
conversion of both tidal and wave energy usually involves mechanical devices.
SeminarsTopics.com
between the warm surface water and the cold deep water differs by about 20C, an OTEC system can
produce a significant amount of power. The oceans are thus a vast renewable resource, with the
potential to help us produce billions of watts of electric power. This potential is estimated to be about
1013 watts of base load power generation, according to some experts. The cold, deep seawater used in
the OTEC process is also rich in nutrients, and it can be used to culture both marine organisms and
plant life near the shore or on land. OTEC produce steady, base-load electricity, fresh water, and airconditioning options.
OTEC requires a temperature difference of about 36 deg F (20 deg C). This temperature
difference exists between the surface and deep seawater year round throughout the tropical regions of
the world. To produce electricity, we either use a working fluid with a low boiling point (e.g.
ammonia) or warm surface sea water, or turn it to vapor by heating it up with warm sea water
SeminarsTopics.com
(ammonia) or de-pressurizing warm seawater. The pressure of the expanding vapor turns a turbine
and produces electricity.
Plant Design and Location
Commercial OTEC facilities can be built on
Land-based and near-shore are more advantageous than the other two. OTEC plants can be
mounted to the continental shelf at depths up to 100 meters, however may make shelf-mounted
facilities less desirable and more expensive than their land-based counterparts. Floating OTEC
facilities with a large power capacity, but has the difficulty of stabilizing in very deep water may
create problems with power delivery.
Commercial ocean thermal energy conversion (OTEC) plants must be located in an environment
that is stable enough for efficient system operation. The temperature of the warm surface seawater
must differ about 20C (36F) from that of the cold deep water that is no more than about 1000
meters (3280 feet) below the surface. The natural ocean thermal gradient necessary for OTEC
operation is generally found between latitudes 20 deg N and 20 deg S.
SeminarsTopics.com
SeminarsTopics.com
The heat exchangers (evaporator and condenser) are a large and crucial component of the closedcycle power plant, both in terms of actual size and capital cost. Much of the work has been
performed on alternative materials for OTEC heat exchangers, leading to the recent conclusion that
inexpensive aluminum alloys may work as well as much more expensive titanium for this purpose.
Subcooled liquid enters the evaporator. Due to the heat exchange with warm sea water, evaporation
takes place and usually superheated vapor leaves the evaporator. This vapor drives the turbine and 2phase mixture enters the condenser. Usually, the subcooled liquid leaves the condenser and finally,
this liquid is pumped to the evaporator completing a cycle.
SeminarsTopics.com
Open-Cycle OTEC
The open cycle consists of the following steps: (i) flash evaporation of a fraction of the warm
seawater by reduction of pressure below the saturation value corresponding to its temperature (ii)
expansion of the vapor through a turbine to generate power; (iii) heat transfer to the cold seawater
thermal sink resulting in condensation of the working fluid; and (iv) compression of the noncondensable gases (air released from the seawater streams at the low operating pressure) to pressures
required to discharge them from the system.
The low pressure in the evaporator is maintained by a vacuum pump that also removes the dissolved
non condensable gases from the evaporator. The evaporator now contains a mixture of water and
steam of very low quality. The steam is separated from the water as saturated vapour. The remaining
water is saturated and is discharged back to the ocean in the open cycle. The steam we have extracted
in the process is a very low pressure, very high specific volume working fluid. It expands in a special
low pressure turbine.
SeminarsTopics.com
There are the temperature differences between stages. One between warm surface water and working
steam, one between exhaust steam and cooling water and one between cooling water reaching the
condenser and deep water. These represent external irreversibilities that reduce the overall
temperature difference.
Hybrid OTEC System
Another option is to combine the two processes together into an open-cycle/closed-cycle hybrid,
which might produce both electricity and desalinated water more efficiently. In a hybrid OTEC
system, warm seawater might enter a vacuum where it would be flash-evaporated into steam, in a
similar fashion to the open-cycle evaporation process.
SeminarsTopics.com
10
The steam or the warm water might then pass through an evaporator to vaporize the working fluid of
a closed-cycle loop. The vaporized fluid would then drive a turbine to produce electricity, while the
steam would be condensed within the condenser to produced desalinated water
V. BENEFITS OF OTEC
We can measure the value of an ocean thermal energy conversion (OTEC) plant and continued
OTEC development by both its economic and no economic benefits. OTECs economic benefits
include the:
Has significant potential to provide clean, cost-effective electricity for the future.
SeminarsTopics.com
11
In small island nations, the benefits of OTEC include self-sufficiency, minimal environmental
impacts, and improved sanitation and nutrition, which result from the greater availability of
desalinated water and Mari culture products
VI. DISADVANTAGES
OTEC-produced electricity at present would cost more than electricity generated from fossil fuels
at their current costs. The electricity cost could be reduced significantly if the plant operated
without major overhaul for 30 years or more, but there are no data on possible plant life cycles.
OTEC plants must be located where a difference of about 40 Fahrenheit (F) occurs year round.
Ocean depths must be available fairly close to shore-based facilities for economic operation.
Floating plant ships could provide more flexibility.
VII. APPLICATIONS
Ocean thermal energy conversion (OTEC) systems have many applications or uses. OTEC can be
used to generate electricity, desalinate water, support deep-water Mari culture, and provide
refrigeration and air-conditioning as well as aid in crop growth and mineral extraction. These
complementary products make OTEC systems attractive to industry and island communities even if
the price of oil remains low.
SeminarsTopics.com
12
The electricity produced by the system can be delivered to a utility grid or used to manufacture
methanol, hydrogen, refined metals, ammonia, and similar products. The cold [5C (41F)] seawater
made available by an OTEC system creates an opportunity to provide large amounts of cooling to
operations that are related to or close to the plant. Likewise, the low-cost refrigeration provided by the
cold seawater can be used to upgrade or maintain the quality of indigenous fish, which tend to
deteriorate quickly in warm tropical regions. The developments in other technologies (especially
materials sciences) were improving the viability of mineral extraction processes that employ ocean
energy.
IX. CONCLUSION
OTEC has tremendous potential to supply the worlds energy. It is estimated that, in an annual
basis, the amount solar energy absorbed by the oceans is equivalent to atleast 4000 times the amount
presently consumed by humans. For an OTEC efficiency of 3 percent, in converting ocean thermal
energy to electricity, we would need less than 1 percent of this renewable energy to satisfy all of our
desires for energy.
Conventional power plants pollute the environment more than an OTEC plant would and, as long as
the sun heats the oceans, the fuel for OTEC is unlimited and free.
SeminarsTopics.com
13
X. REFERENCE
1. D. H. Johnson, Energy, Vol. 8, No. 20, pp. 927-946 (1983).
2. Claude G. (1930), "Power from the Tropical Seas" in Mechanical Engineering, Vol. 52, No.12, 19,
pp. 1039-1044.
3. Nihous G.C. and. Vega L.A (1991), "A Review of Some Semi-empirical OTEC Effluent Discharge
Models", in Oceans 91, Honolulu, Hawaii. [The OTEC effluent models are summarized]
4. Ocean Thermal Corporation. (1984a). Ocean Thermal Energy Conversion (OTEC) Preliminary
Design Engineering Report. Prepared for U.S. Department of Energy, Washington, D.C.
5. Ocean Data Systems Inc. (1977). OTEC Thermal Resource Report for Hawaii Monterey, CA:
Ocean Data Systems, Inc.
SeminarsTopics.com
14