Professional Documents
Culture Documents
1
___________________
COMOS iDB
Help folder for the cDB and
2
___________________
iDB databases
COMOS
COMOS 10.1 - What's new?
3
___________________
Using the COMOS help
COMOS menu when using
4
___________________
iDB
5
___________________
Platform
6
___________________
Process
Operating Manual
7
___________________
Automation
8
___________________
Lifecycle
11/2013
A5E32016072-AA
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Trademarks
All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NRNBERG
GERMANY
A5E32016072-AA
11/2013 Technical data subject to change
Table of contents
1
3.2
3.3
3.4
3.5
Platform .................................................................................................................................21
5.1
5.2
5.3
5.4
5.4.1
5.4.2
5.5
5.6
5.6.1
5.6.1.1
5.6.1.2
Process .................................................................................................................................33
6.1
P&ID ...................................................................................................................................... 33
Automation.............................................................................................................................35
7.1
Logical ................................................................................................................................... 35
7.2
Lifecycle ................................................................................................................................37
8.1
3D Integration......................................................................................................................... 37
8.2
PQM ...................................................................................................................................... 39
Table of contents
COMOS iDB
Overview
A new database standard is introduced with COMOS 10.1: industrial DataBase (iDB).
iDB is the secure platform for industry-specific data management.
With iDB you will shorten your development cycles, reduce your development effort, and
increase your productivity. Benefit from the advantages of the latest generation of
databases:
Standardization of data objects
Ability to update even a productively deployed database
Documentation of the most important database contents, for example, script blocks
Current units and symbols
This document describes innovations for COMOS 10.1 based on the "iDB" database. You
will find more detailed information on the features of iDB in section COMOS Platform
(Page 21).
If you are already a customer, you can continue to use your existing databases (database
standard cDB) with version 10.1.
COMOS iDB
Overview
A separate help folder is supplied for the iDB and cDB databases as of COMOS version
10.1. You can see the content of the respective folder in the COMOS "Help" menu
depending on the database with which you start COMOS.
See also
Copying documentation to the help folder (Page 9)
Requirements
COMOS is installed.
Procedure
1. Open the directory in which the help files are located in the file explorer.
For example: <COMOS Installation directory>/Help/<Help folder database>/<Language
folder>
2. Save your documentation in the respective help folder "Help_iDB" or "Help_cDB".
Note
"Help" directory
Documents that are located directly in the "Help" directory are not displayed.
3.2
10
11
3.3
Requirements
Operating system: Windows 98 and higher
Procedure
1. Open the COMOS help system in COMOS or the file system as HTML help. See also
chapter Opening the help (Page 9).
2. On the "Contents" tab, open the node of a COMOS product family, for example "COMOS
Platform".
All the manuals that belong to the modules of this product family are displayed.
3. Open a manual and select a chapter.
The chapter contents are shown on the right.
4. You have the following options when working with the help system:
Search:
You can search through the entire help system on the "Search" tab.
Displaying related topics:
If related topics are available for the chapter currently displayed, these are listed in the
menu bar above the chapter contents: The "Manuals" menu contains related
instructions; the "Basic principles" menu contains related basic principles.
To change to a chapter, select it.
Creating Favorites:
Select a chapter on the "Contents" tab. Change to the "Favorites" tab and click "Add".
Toggling between chapters already displayed:
You can use the "History" and "Extras" menu and the buttons "Back" and "Forward" to
toggle between the chapters already displayed.
Note
If you change from one chapter to a different chapter, for example via the links embedded in
the chapters, the Favorites or the "History" menu, the node of the currently open chapter is
always displayed on the "Contents" tab.
12
3.4
DE=German
EN=English
FR=French
ZH=Chinese simplified
13
14
3.5
15
2. Click "Yes, I would like to register now" and fill out the fields in the following windows.
16
17
Requirements
The COMOS menu changes depending on the COMOS version and the type of database.
This section describes the changes under the following conditions:
Switching from COMOS 10.0 to COMOS 10.1
And simultaneously from cDB to iDB
19
20
Platform
5.1
Adaptation of the documentation for the topic "Administration of rights and roles"
For the version COMOS 10.1, additional information was added to the overall help regarding
the maximum number of roles and the maximum number of users.
5.2
COMOS Platform
iDB database
COMOS is delivered with the new database type "iDB". This documentation describes
COMOS used in conjunction with iDB.
21
Platform
5.2 COMOS Platform
Database update
The "Database update" tool has the following use cases:
Install iDB database updates
Controlled application of the corrections provided by Siemens to your own database.
The iDB database updates are cumulative. Update 5 also includes all corrections and
updates from updates 1 to 4.
The following workflow is offered for this purpose:
1. Preliminary application of changes to a special working layer called the consolidation
layer
Preliminary application is possible in one or all of the following project types:
System project
Base project
Template project
2. Isolated check of changes
3. Selection of objects to be applied
4. Application of selected objects to the released area
22
Platform
5.2 COMOS Platform
For this reason, four basic variants for classifications appear below "@99 > A10":
Classification key 1: COMOS (hierarchic)
Classification key 2: COMOS (functional)
Classification key 3: Customer (hierarchic)
Classification key 4: Customer (functional)
The hierarchic classification with prefix "Z" is no longer reserved for customer-specific
classifications.
Script Library
All scripts were standardized and stored under a common node. The script blocks are
commented and are easy to use or modify. This greatly reduces the effort required for
customer-specific modification of the database.
Inheriting queries
Configure a source query and inherit another query from it, which is in a branch of the
structure tree.
To inherit a query, proceed as follows:
1. Select the "System" tab in the properties of a query.
2. Drag&drop the source query from the Navigator onto the "Base object" field in the
"Reference" control group.
A window opens. You have the following options:
To change the base object reference and replace your archive settings, click the "Yes"
button.
To change the base object reference but retain your archive settings, click the "No"
button.
To cancel the process without making any changes, click the "Cancel" button.
3. Confirm your entries.
23
Platform
5.2 COMOS Platform
DIN identifier
Unit systems are standardized for the different technical areas. To illustrate these
standardizations, the "DIN identifier" field is now available. A unit is uniquely identified
internationally with a DIN identifier and can be more easily imported or exported. The DIN
identifiers are listed in a DIN property list that is available on the Internet.
24
Platform
5.2 COMOS Platform
25
Platform
5.2 COMOS Platform
Logging (TraceListener)
The "Trace and debug schema" from .NET Framework 4.5 is supported. You can find the
documentation for the associated XML schema on the Internet at Microsoft msdn. Logging is
switched on as follows:
Comos.exe.config under <system.diagnostics><sharedListeners>: Comment in
"ComosTextWriterTraceListener".
The listener must then be added to the corresponding trace sources: Comos.exe.config
under <system.diagnostics><sources>
GrayboxSelectionMode
Selection behavior for modules can be changed using the system attribute
(SYS.GrayboxSelectionMode) in the main document.
GrayboxSelectionMode = 0
When you click on an object within the module, the object itself is selected.
GrayboxSelectionMode = 1 (default)
When you click on an object within the module, the entire module is selected. Only the
second click selects an individual object.
26
Platform
5.3 COMOS glossary
5.3
COMOS glossary
Revision
The terms in the COMOS glossary were revised. The glossaries of the following manuals
were moved to the COMOS glossary:
PQM
FEED Operation
5.4
COMOS Web
5.4.1
Security information
Data security
The "COMOS Web" manual now includes information on data security.
5.4.2
Saving "COMOS Mobile Document Review" data management in a separate base project
In the project settings in COMOS, you set the free saving of "COMOS Mobile Document
Review" data management in a base project other than S01. Here you will find the new
project option "Base project" under the "Web" category.
You can find more information on this topic in the "COMOS Web" manual, keyword "Saving
the "COMOS Mobile Document Review" data management in a separate base project".
27
Platform
5.5 COMOS Enterprise Server
5.5
28
Platform
5.6 COMOS Platform Interfaces
5.6
5.6.1
Interface to Teamcenter
5.6.1.1
Objective
Pipe parts are transferred from COMOS to NX via PDI. The data is transferred via
Teamcenter to NX. Teamcenter is the interface for the data transfer between COMOS and
NX. Transfer takes place by means of XML files in which information about pipe specs and
pipe parts is collected.
Pipe schedules are transferred as PDF. Information about PipeRun and XMplant is also
transferred as an XML file.
Functional scope
PDI comprises the following functions:
Connection between COMOS and NX
Connection between objects
Navigation to 3D objects in NX and COMOS objects on the P&ID
Pipe spec export
Publishing documents
Administration
The configuration file "Comos.PDI.config" is available for the administration of PDI.
Use the "pipepartfamilies.xml" file to assign pipe parts in COMOS to pipe part families in NX.
You can edit the "pipepartfamilies.xml" file in COMOS. The following functions are available
for this purpose:
Adding attributes
Editing attributes
Deleting attributes
You can find more information on this topic in the "COMOS Platform Interfaces" manual,
keyword "Process Data Interface (PDI)".
29
Platform
5.6 COMOS Platform Interfaces
5.6.1.2
30
Platform
5.6 COMOS Platform Interfaces
31
Process
6.1
P&ID
XMpLant export
COMOS can now also export files based on XMpLant 3.3.3.
XMpLant import
For the import, COMOS only supports files with XMpLant Version 3.3.3.
An administrator can enter the subprogram OnXMpLantImportDone on P&ID objects or on
P&ID in the script. Once the XMpLant import is complete, the script is executed for each
engineering object.
You can find additional information on this topic in the "P&ID Administration" manual,
keyword "Creating "OnXMpLantImportDone" on COMOS objects".
Based on two additional import options, you now have the option to identify changes
during a reimport and determine how to handle specific objects.
In the "Import and dissolve drawing" window, the following import options were added:
"Import into new working layer" option
"Remove not contained objects" option
You can find additional information on this topic in the "P&ID Operation" manual, keyword
""Import and dissolve drawing" window".
PDF import
During a PDF import, all texts of a PDF are imported into COMOS. COMOS creates objects
for each text in a text field in accordance with the rules defined by an administrator.
You can find more information on this topic in the "P&ID Operation" manual, keyword "PDF
import".
New designation
"Pipe branch"
"Pipe section"
"Equipment"
"Equipment"
33
Process
6.1 P&ID
34
Automation
7.1
Logical
7.2
35
Automation
7.2 Cabinet Equipment wizard
36
Lifecycle
8.1
3D Integration
37
Lifecycle
COMOS 3D Viewing
Installation of "COMOS Walkinside Integration"
"COMOS Walkinside Integration" is the interface between COMOS and the 3D viewer
application, COMOS Walkinside. In order to use COMOS 3D viewing, you must install the
interface.
You can find additional information on this topic in the "3D Integration Administration"
manual, keyword "Installing "COMOS Walkinside Integration"".
Assignment of COMOS objects and Walkinside objects
Using a new plugin, you can now assign objects in order to make navigation possible. In the
plugin, create a unique label for every object of a defined quantity of objects on the COMOS
page and on the Walkinside page. The label is created with the aid of scripts. The related
objects on the COMOS page and the Walkinside page must have the same label.
You can find additional information on this topic in the "3D Integration Administration"
manual, keyword "Configuring navigation".
Export COMOS objects by means of a query
This function is used to collect certain objects in Walkinside, which are already located in
Walkinside and for which you have created an assignment.
Example scenario:
You want to view only those object in Walkinside which have to be maintained.
You collect these COMOS objects in a query and export them to Walkinside. In
Walkinside, a view of these objects is temporarily displayed.
New designation
"TaggedItem" class
"Pipe" class
"Cable" class
"@PDMSMAP" folder
LocObj
Area pipe
8.2
38
Lifecycle
8.3 PQM
8.3
PQM
Objective
PQM (Project Quality Management) imports and administers external documents in
COMOS. PQM supports you here as a document management system (DMS) for all
important lifecycle phases of your project documents.
39
Lifecycle
8.3 PQM
40