Professional Documents
Culture Documents
Owner:
Operator:
Country of Installation:
Service:
Liquid Level:
Specific Gravity:
Length, Tangent-to-Tangent
Diameter (m):
National Board
Registration Reqd:
Yes
No
Other
Jurisdiction
Registration Reqd:
Yes
No
List:
OPERATING CONDITIONS:
Case 1
Case 2
DESIGN CONDITIONS:
Internal Design Pressure:
External Design Pressure:
MAWP Internal:
MAWP External:
Minimum Design Metal Temperature
(MDMT) Case 1
Minimum Design Metal Temperature
(MDMT) Case 2
Corrosion Allowance:
Shell
Int.
Ext.
State/Province of
Installation:
Item No.:
Type:
Vertical
Horizontal
Overpressure Protection:
Valve
Rupture Disk
OpenVent
Service:
Hydrocarbon
Utility
Other _______________________
Minimum Pressure
City of Installation:
Maximum Pressure
Minimum Temp
Pressure
C @
Heads
Int.
Nozzles
Ext.
Int.
Ext.
Jacket
Int.
Maximum Temp
Temperature
C @
Sphere
Ext.
Coil
Int.
Calculated by Mfg:
Calculated by Mfg:
Due to: Process
Other
Ambient Temperature
Due to: Process
Other
Ambient Temperature
Supports
Internals
Ext.
Int.
Design
Life:
years
Ext.
Capacity:
Expandability:
Capacity Utilization:
Operability /
Units:
Maintainability:
Wind Speed
Classification
Exposure
Topographic
Elevation
Category
Category
Factor
Units:
NOT PERMITTED
Other
None
Insulated: Yes
No
Type:
Thickness
Density
Coating Specification:
By Mfg.
By Others
External
Internal
Ellipsoidal Head
Hemispherical Head
Torispherical Head
Toriconical Head
Conical Head
Nozzles
Flanges
Stiffener Rings
Attachments
Internals
Reinforcing Pads
Other
NOZZLE SCHEDULE
Description
No.
Rqd.
Size
Flange
Type
Class
Description
No.
Rqd.
Size
Flange
Type
Class
Sheet 1
PRESSURE VESSELS ASME DATA SHEET FOR MINIMUM SERVICE PRESSURE VESSEL
WELDED PRESSURE JOINT REQUIREMENTS
DESIGN BASIS:
JOINT LOCATION
PARAGRAPH UW-3
TYPE OF JOINT
Category A
Category B
Head-to-Shell
Other
Category C
Body Flanges
Nozzle Flanges
Category D
BODY FLANGE REQUIREMENTS
Description
Type
Gasket Style
Joint Assembly
(See ASME PCC-1)
SKETCH
Add additional sheets as necessary
GENERAL NOTES
CERTIFICATION
The statements made in this form are accurate and represent all details of design per the owner/operator or the designated agent.
Registration Seal (Optional)
Date: _____________________________________________________________________
User:______________________________________________________________________
Signed:____________________________________________________________________
(Representative)
Sheet 2