Professional Documents
Culture Documents
For installation and security purposes, PRG refers to the name of the folder in which the new versions
are installed as PRG2015. For the last two major releases, installations and updates defaulted to the
PRG2011 folder.
Microsoft Windows 7
Microsoft Windows 8
Microsoft Windows 8.1
Microsoft Windows Server 2003
Microsoft Windows Server 2008
Microsoft Windows Server 2012
Permission
Hard Disk
After the PRG2015.zip download is complete, extract the contents to a folder on the host computer.
The Setup_PRG2015.EXE is a bootstrapper executable that extracts the MSI, checks prerequisites,
downloads dependencies and configures install environment. Both network and non-network users must
have a full program installation on their computer. The Setup_PRG2015.EXE must be run on all users
computers that require access to any PRG software program. Network drives are only supported for data
files. FEPipe 7.0 NozzlePRO 9.0 must be installed on the end users computer.
To begin installation you must have Administrator privileges to the host computer and a live internet
connection. The Setup_PRG2015.EXE installer will not execute unless started with full Administrator
privileges and will not complete without an internet connection.
The installer will check if Micrsoft.NET 4 or Visual C++ 2010 is installed on your computer. PRG2015
requires both as prerequisites for installation. If it is missing, the installer pings Microsoft for download.
If you do not have Administrator, privileges please follow these steps. Alternatively, restart Windows and
login with an Administrator account.
Before FEPipe 7.0 NozzlePRO 9.0 program files are installed. The installer will run a diagnostic check
on your computer to determine if the required prerequisites are installed. FEPipe 7.0 NozzlePRO 9.0
require Microsoft NET 4.0 framework and Visual C++ 2010. If both are present the installer will begin
FEPipe 7.0 NozzlePRO 9.0 installation.
However, if either Microsoft NET 4.0 or Visual C++2010 are not present the installer will ping the
Microsoft website for download.
10
11
Select FINISH and the installer will now begin FEPipe 7.0 NozzlePRO 9.0 installation.
12
13
14
(blank space)
(decimal points, blank space)
(Universal Naming Convention (UNC) paths)
15
16
17
18