Professional Documents
Culture Documents
http://www.intel.com/go/ssd
GETTING STARTED
Before you start, refer to your computers documentation to determine
whether your system supports Serial ATA (SATA) on the motherboard and the
location of the SATA connectors. If your PC does not have SATA connectors,
you will need to purchase a SATA host adapter that is compatible with
your computer and operating system. Then, using the SATA host adapter
manufacturers installation instructions, you will need to install the adapter
with the corresponding driver. You will also need the following items:
Four M3-0.5x5mm or M3-0.5x6mm mounting screws (included) and a #2
Phillips screwdriver.
A SATA interface cable with a maximum length of 1 meter. (Desktop usage
model only)
A SATA-compatible (2.5 form factor) power cable or adapter. (Desktop
usage model only)
HANDLING PRECAUTIONS
Follow your PC installation manual for installation upgrades.
To protect you and your system, take the following precautions:
For Notebooks, disconnect the PC POWER CORD FROM THE AC WALL
OUTLET AND REMOVE BATTERY. After installation and reinstalling the
cover, reinstall the battery and reattach the power cord to the outlet.
For Desktops, disconnect the PC POWER CORD FROM THE AC WALL
OUTLET during installation of the SSD. After installation and reinstalling
the cover, reattach the power cord to the outlet.
Disk drives are very sensitive to static electricity. Keep the drive in the
protective anti-static container until you are ready to install the SSD.
http://www.intel.com/go/ssd
Wear a wrist strap and connect the ground strap to the computer case to
minimize static electricity.
Handle the drive with care. Do not touch the connectors.
Check alignment closley before mating connectors. Do not use excessive
force.
Do not remove the encasement or disassemble the drive, as such actions
void the warranty.
INSTALLATION INSTRUCTIONS
Use the following instructions to attach the cables, if necessary, and mount
the drive.
DESKTOP
Use the following instructions to install your SSD in a desktop PC:
1. If your desktop has a 3.5 inch drive bay, use the adapter bracket to securely
mount the SSD.
Place the SSD (with Intel Logo Side up) on the adapter. See Figure 1.
Make sure that all four holes on the left and right side of the adaptor
bracket are aligned to that of the SSD. Secure the drive by inserting
four of the M3-0.5X5 mm or M3-0.5x6 mm screws in each of the
corresponding holes.
Note: Do not over tighten the screws, as this may damage the SSD.
Figure 1. Attaching the adapter bracket for use in a desktop PC 3.5" drive bay
http://www.intel.com/go/ssd
2. Attach one end of the SATA interface cable to the SATA interface
connector on your computers motherboard or SATA host adapter.
Note: SATA connectors are keyed to ensure correct orientation.
3. Attach the other end of the SATA interface cable to the SSD.
See Figure 2, Item 1.
4. Attach the power cable or adapter to the SSD. See Figure 2, Item 2.
5. Secure the drive by either inserting one of the M3-0.5x5mm or
M3-0.5x6mm screws in each of the side-mounting or bottom-mounting
holes; or by sliding the SSD with adapter bracket into the desktops 3.5 inch
drive bay.
Note: Do not over tighten the screws, as this may damage the SSD.
Figure 2. Attaching SATA interface cable and power supply cable for use in a
desktop PC
http://www.intel.com/go/ssd
NOTEBOOK
Follow the notebook manufacturer's instructions for your model on how to
gain access to your drive bay.
Use the following instructions to securely mount your SSD in a Notebook
1. Slip the SSD into the drive opening in the notebook. See Figure 3.
Figure 3.
http://www.intel.com/go/ssd
http://www.intel.com/go/ssd
GARANTIE LIMITE
Reportez-vous au CD joint pour consulter votre Garantie de produit.
PRPARATION
Avant de commencer, reportez-vous la documentation de votre ordinateur
an de dterminer si la carte mre de votre systme prend en charge la
technologie SATA (Serial ATA) et lemplacement des connecteurs SATA. Si votre
PC ne comporte pas de connecteurs SATA, vous devrez acheter un adaptateur
hte SATA qui soit compatible avec votre ordinateur et votre systme
dexploitation. Ensuite, en suivant les instructions fournies par le fabricant
de ladaptateur hte SATA, vous devrez installer ladaptateur avec le pilote
correspondant. Vous aurez galement besoin des lments suivants :
Quatre vis de montage M3-0,5x5 mm ou M3-0,5x6 mm (fournies) et un tournevis
cruciforme n 2.
Un cble dinterface SATA dune longueur maximale de 1 mtre.
(uniquement pour le modle de bureau)
Un cble dalimentation ou un adaptateur compatible SATA. (format 2,5
pouces) (uniquement pour le modle de bureau)
http://www.intel.com/go/ssd
INSTRUCTIONS DINSTALLATION
Le cas chant, utilisez les instructions suivantes pour connecter les cbles et
installer le disque.
ORDINATEUR DE BUREAU
Utilisez les instructions suivantes pour installer votre disque SSD dans un
ordinateur de bureau :
1. Si votre ordinateur de bureau ne dispose que demplacements pour
units 3,5 pouces, utilisez le support adaptateur pour monter le SSD
correctement.
Placez le SSD (avec le logo Intel visible sur la partie suprieure du SSD)
sur l'adaptateur. Consultez la Figure 1. Assurez-vous que les quatre
trous situs sur les cts gauche et droit du support adaptateur
sont aligns avec ceux du SSD. Fixez le disque en insrant quatre vis
M3-0,5X5 mm ou M3-0,5x6 mm dans chacun des trous de montage
en vis--vis.
Remarque: Ne serrez pas trop les vis car cela peut endommager le SSD.
2. Attachez une extrmit du cble dinterface SATA au connecteur
dinterface SATA sur la carte-mre de votre ordinateur ou sur adaptateur
hte SATA.
Remarque: Les connecteurs SATA comportent des dtrompeurs pour garantir
la bonne orientation.
http://www.intel.com/go/ssd
Figure 1. Fixation du support adaptateur avant insertion dans un
emplacement de disque 3,5 pouces d'un ordinateur de bureau
http://www.intel.com/go/ssd
ORDINATEUR PORTABLE
Suivez les instructions du fabricant de votre ordinateur portable pour savoir
comment accder lemplacement du disque de votre ordinateur.
Utilisez les instructions suivantes pour monter le SSD correctement dans un
ordinateur portable
1. Glissez le SSD dans lemplacement du disque de lordinateur portable.
Consultez la Figure 3.
Figure 3. Insertion du SSD dans lemplacement du disque de lordinateur
portable
http://www.intel.com/go/ssd
CONFIGURATION DU BIOS
Refermez le botier de lordinateur et redmarrez votre systme. Celui-ci doit
automatiquement reconnatre le SSD qui vient dtre install. Si non, utilisez les
instructions suivantes pour dtecter le nouveau disque :
Redmarrez lordinateur de nouveau. Durant linitialisation, accdez au
programme de conguration systme, qui peut tre activ en appuyant
sur une touche spciale comme CHAP, F1, ou SUPPR. Consultez
la documentation de votre ordinateur pour connatre le(s) touche(s)
approprie(s) pour votre systme.
Dans le programme de conguration systme (appel aussi BIOS), indiquez
au systme de dtecter automatiquement le nouveau disque.
Enregistrez les paramtres et sortez du BIOS.
Redmarrez lordinateur.
Quand lordinateur redmarre, il devrait reconnatre le nouveau disque. Si votre
ordinateur ne reconnat pas le disque, veuillez contacter votre reprsentant
Intel local pour obtenir de lassistance ou consultez la page FAQ http://www.
intel.com/support/ssdc/hpssd/sb/CS-030158.htm ou http://www.intel.com/
support/9089.htm pour obtenir le numro de tlphone du service de Support
Client local.
http://www.intel.com/go/ssd
BESCHRNKTE GARANTIE
Ihre Produktgarantie nden Sie auf der beiliegenden CD.
ERSTE SCHRITTE
Bevor Sie beginnen, lesen Sie bitte in der Dokumentation Ihres Computers
nach, ob Ihr System Serial ATA (SATA) auf der Hauptplatine untersttzt und
wo sich die SATA-Anschlsse benden. Verfgt Ihr PC ber keine SATAAnschlsse, mssen Sie einen SATA-Hostadapter kaufen, der mit Ihrem
Computer und Ihrem Betriebssystem kompatibel ist. Anschlieend mssen
Sie mit Hilfe der Installationsanweisungen des Herstellers des SATAHostadapters den Adapter mit dem entsprechenden Treiber installieren.
Auerdem bentigen Sie die folgenden Dinge:
Vier Befestigungsschrauben M3-0,5x5mm oder M3-0,5x6mm (beiliegend)
und einen Phillips-Schraubendreher Nr. 2.
ein SATA-Interfacekabel mit einer maximalen Lnge von 1 m. (nur fr den
Desktop-PC geeignetes Modell)
ein SATA-kompatibles (Formfaktor 2,5) Stromversorgungskabel oder ein
Netzteil. (nur fr den Desktop-PC geeignetes Modell)
SICHERHEITSVORKEHRUNGEN
Befolgen Sie bei der Installation von Upgrades die Installationsanleitung Ihres PCs.
Um sich und Ihr System zu schtzen, treffen Sie die folgenden
Sicherheitsvorkehrungen:
Ziehen Sie bei Notebooks das NETZKABEL AUS DER STECKDOSE UND
BAUEN SIE DEN AKKU AUS. Bauen Sie nach der Installation und dem
Wiederanbau des Gehuses den Akku wieder ein, und stecken Sie das
Netzkabel wieder in die Steckdose.
Ziehen Sie bei Desktop-PCs whrend der Installation des SSD das
NETZKABEL AUS DER STECKDOSE. Stecken Sie nach der Installation und
dem Wiederanbau des Gehuses das Netzkabel wieder in die Steckdose.
Festplatten reagieren sehr empndlich auf statische Auadung. Bewahren
Sie das Laufwerk in dem gegen statische Auadung geschtzten Behlter
auf, bis Sie das SSD installieren.
http://www.intel.com/go/ssd
Tragen Sie ein Erdungsband um Ihr Handgelenk und verbinden Sie es mit
dem Computergehuse, um die statische Auadung zu minimieren.
Gehen Sie vorsichtig mit dem Laufwerk um. Berhren Sie nicht die
Steckverbindungen.
berprfen Sie unmittelbar vor dem Verbinden der Steckverbindungen
deren Ausrichtung. Wenden Sie keine Gewalt an.
Entfernen Sie nicht das Gehuse des Laufwerks und zerlegen Sie dieses
nicht, denn durch solche Handlungen wird die Garantie ungltig.
INSTALLATIONSANWEISUNGEN
Gehen Sie beim Anschluss der Kabel (sofern erforderlich) und der Montage des
Laufwerks nach den folgenden Anweisungen vor.
DESKTOP-PC
Um Ihr SSD in einen Desktop-PC einzubauen, gehen Sie bitte nach den
folgenden Anweisungen vor:
1. Wenn Ihr Desktop-PC einen 3,5-Zoll-Laufwerkschacht hat, benutzen Sie die
Adapterhalterung, um das SSD sicher im Schacht zu befestigen.
Positionieren Sie das SSD (mit der Seite mit dem Intel-Logo nach
oben) auf dem Adapter. Siehe Abb. 1. Stellen Sie sicher dass alle vier
Bohrungen auf der linken und rechten Seite der Adapterhalterung
mit denen des SSD uchten. Befestigen Sie das Laufwerk, indem Sie
in jede der entsprechenden Bohrungen eine der vier Schrauben M30,5x5mm oder M3-0,5x6mm drehen.
Hinweis: Ziehen Sie die Schrauben nicht zu fest an, da dadurch das SSD
beschdigt werden kann.
2. Schlieen Sie ein Ende des SATA-Interfacekabels an den SATAInterfaceanschluss auf der Hauptplatine Ihres Computers oder auf dem
SATA-Hostadapter an.
Hinweis: SATA-Stecker sind kodiert, um zu gewhrleisten, dass sie nur in der
richtigen Position eingefhrt werden knnen.
http://www.intel.com/go/ssd
Abb. 1. Anbringen der Adapterhalterung fr die Verwendung im
3,5"-Laufwerkschacht eines Desktop-PCs
3. Schlieen Sie das andere Ende des SATA-Interfacekabels an das SSD an.
Siehe Abb. 2, Element 1.
4. Schlieen Sie das Stromversorgungskabel oder Netzteil an das SSD an.
Siehe Abb. 2, Element 2.
5. Befestigen Sie das Laufwerk, indem Sie in jede der seitlichen oder
unteren Bohrungen eine der Schrauben M3-0,5x5mm oder M3-0,5x6mm
drehen, oder indem Sie das SSD mit Adapterhalterung in den 3,5-ZollLaufwerkschacht des Desktop-PCs schieben.
Hinweis: Ziehen Sie die Schrauben nicht zu fest an, da dadurch das SSD
beschdigt werden kann.
Abb. 2. Anschluss des SATA-Interfacekabels und des Stromversorgungskabels
fr die Verwendung in einem Desktop-PC
1. SATA-Interfacekabel
2. Stromversorgungskabel
http://www.intel.com/go/ssd
NOTEBOOK
Um an den Laufwerkschacht zu gelangen, befolgen Sie bitte die Anweisungen
des Notebook-Herstellers fr Ihr Modell.
Gehen Sie nach den folgenden Anweisungen vor, um Ihr SSD sicher in einem
Notebook zu befestigen
1. Setzen Sie das SSD in die Laufwerksffnung im Notebook ein. Siehe Abb. 3.
Abb. 3. Einsetzen des SSD in die Laufwerksffnung des Notebook
2. Befestigen Sie das Laufwerk, indem Sie in jede der seitlichen oder unteren
Bohrungen eine der Schrauben M3-0,5x5mm oder M3-0,5x6mm drehen.
Siehe Abb. 4.
Hinweis: Ziehen Sie die Schrauben nicht zu fest an, da dadurch das SSD
beschdigt werden kann.
Abb. 4. Befestigen des SSD in der Laufwerksffnung des Notebooks
http://www.intel.com/go/ssd
http://www.intel.com/go/ssd
GARANTA LIMITADA
Consulte la garanta del producto en el CD adjunto.
INTRODUCCIN
Antes de comenzar, consulte la documentacin de su equipo para determinar
si su sistema es compatible con conectores ATA serie (SATA) en la placa madre
y la ubicacin de los conectores SATA. Si su PC no tiene conectores SATA,
deber comprar un adaptador host SATA que sea compatible con su equipo y su
sistema operativo. Luego, utilice las instrucciones de instalacin del fabricante
del adaptador host SATA para instalar el adaptador con el controlador
correspondiente. Adems, necesitar los siguientes elementos:
Cuatro tornillos de montaje M3 de 0.5 x 5 mm o M3 de 0.5 x 6 mm
(incluidos) y un destornillador Phillips n. 2.
Un cable de interfaz SATA con una longitud mxima de 1 metro. (Solamente
el modelo para uso en PC de escritorio)
Un cable de alimentacin o adaptador compatible con SATA. (formato de
2.5) (Solamente el modelo para uso en PC de escritorio)
http://www.intel.com/go/ssd
INSTRUCCIONES DE INSTALACIN
Siga las siguientes instrucciones para conectar los cables, si es necesario e
instalar la unidad.
PC DE ESCRITORIO
Para instalar su SSD en una PC de escritorio, siga las instrucciones que
aparecen a continuacin:
1. Si su PC de escritorio tiene un compartimiento de unidad de 3.5 pulgadas,
utilice el soporte adaptador para instalar la SSD de manera segura.
Coloque la SSD (con el logotipo de Intel hacia arriba) en el adaptador.
Consulte la Figura 1. Asegrese de que los cuatro agujeros en el
lado izquierdo y derecho del soporte adaptador estn alineados con
los agujeros de la SSD. Para asegurar la unidad, coloque cuatro de
los tornillos M3 de 0.5 x 5 mm o M3 de 0.5 x 6 mm en los agujeros
correspondientes.
Nota: No apriete demasiado los tornillos ya que esto puede daar la SSD.
2. Conecte un extremo del cable de interfaz SATA al conector de interfaz
SATA que se encuentra en la placa madre de su equipo o el adaptador host
SATA.
Nota: Los conectores SATA estn bloqueados para asegurar la orientacin
correcta.
http://www.intel.com/go/ssd
Figura 1. Cmo colocar el soporte adaptador para utilizarlo en un
compartimiento para la unidad de 3.5" de una PC de escritorio
http://www.intel.com/go/ssd
COMPUTADORA PORTTIL
Siga las instrucciones del fabricante de su computadora porttil para su modelo
para obtener acceso al compartimiento de la unidad.
Siga las instrucciones que aparecen a continuacin para instalar de manera
segura su SSD en una computadora porttil.
1. Deslice la SSD en la abertura de la unidad de la computadora porttil.
Consulte la Figura 3.
Figura 3. Cmo colocar la SSD en la abertura de la unidad de la computadora
porttil
http://www.intel.com/go/ssd
http://www.intel.com/go/ssd
GARANTIA LIMITADA
Consulte a Garantia do Produto no CD includo.
INTRODUO
Antes de comear, consulte a documentao de seu computador para
determinar se o seu sistema oferece suporte para ATA Serial (SATA) na placa
me e qual a localizao dos conectores SATA. Se o seu PC no possuir
conectores SATA, voc precisar comprar um adaptador host SATA que seja
compatvel com o seu computador e seu sistema operacional. Em seguida,
usando as instrues de instalao do fabricante do adaptador host SATA, voc
precisar instalar o adaptador com a unidade correspondente. Voc tambm
precisar dos seguintes itens:
Quatro parafusos de montagem M3-0,5x5mm ou M3-0,5x6mm (includos)
e uma chave de fenda Phillips #2.
Um cabo de interface SATA com um comprimento mximo de 1 metro.
(modelo de utilizao em desktop apenas)
Um adaptador ou cabo de alimentao compatvel com SATA. (fator de
forma de 2,5 pol) (modelo de utilizao em desktop apenas)
PRECAUES DE MANUSEIO
Siga o manual de instalao do seu PC para atualizaes de instalao.
Para proteger voc e o seu sistema, tome as seguintes precaues:
Para Notebooks, desconecte o CABO DE ALIMENTAO DO PC DA
TOMADA CA E REMOVA A BATERIA. Depois de instalar e de recolocar a
tampa, reinstale a bateria e reconecte o cabo de alimentao na tomada.
Para Desktops, desconecte o CABO DE ALIMENTAO DO PC DA TOMADA
CA durante a instalao da SSD. Depois de instalar e de recolocar a tampa,
reconecte o cabo de alimentao na tomada.
Unidades de disco so muito sensveis eletricidade esttica. Mantenha a
unidade no continer de proteo antiesttica at que voc esteja pronto
para instalar a SSD.
Use uma pulseira e conecte a tira aterrada ao gabinete do computador para
minimizar a eletricidade esttica.
http://www.intel.com/go/ssd
INSTRUES DE INSTALAO
Use as instrues a seguir para conectar os cabos, se necessrio, e montar a
unidade.
DESKTOP
Use as instrues a seguir para instalar a SSD em um PC desktop:
1. Se o seu desktop possuir uma baia para unidade de disco de 3,5 polegadas,
use a ala do adaptador para montar a SSD com segurana.
Coloque a SSD (com o logotipo da Intel para cima) no adaptador. Veja
a Figura 1. Certique-se de que todos os quatro orifcios nos lados
esquerdo e direito da ala do adaptador estejam alinhados com os da
SSD. Prenda a unidade inserindo quatro dos parafusos M3-0,5X5 mm
ou M3-0,5x6 mm em cada um dos orifcios correspondentes.
Nota: No aperte demais os parafusos, pois isso poder danicar a SSD.
2. Conecte uma ponta do cabo de interface SATA ao conector de interface
SATA na placa me de seu computador ou no adaptador host SATA.
Nota: Os conectores SATA tm pinos para garantir a orientao correta.
http://www.intel.com/go/ssd
Figura 1. Conectando a ala do adaptador para uso em uma baia para unidade
de disco de 3,5 pol. de PC desktop
http://www.intel.com/go/ssd
NOTEBOOK
Siga as instrues do fabricante do modelo de seu notebook para saber como
obter acesso baia para unidade de disco.
Use as instrues a seguir para montar a SSD com segurana em um Notebook
1. Introduza a SSD na abertura da unidade no notebook. Veja a Figura 3.
Figura 3. Inserindo a SSD na abertura da unidade do Notebook
2. Prenda a unidade inserindo um dos parafusos M3-0,5x5mm ou M30,5x6mm em cada um dos orifcios de montagem lateral ou de montagem
inferior. Veja a Figura 4.
Nota: No aperte demais os parafusos, pois isso poder danicar a SSD.
Figura 4. Prendendo a SSD na abertura da unidade do Notebook
http://www.intel.com/go/ssd
CONFIGURE A BIOS
Feche o gabinete do computador e reinicie o sistema. Seu computador dever
reconhecer automaticamente a SSD instalada recentemente. Se no, use as
instrues a seguir para detectar a nova unidade:
Reinicie o computador novamente. Enquanto o sistema estiver sendo
inicializado, execute o programa de congurao do sistema, que pode
ser ativado pressionando uma tecla especial como ESC, F1 ou DELETE.
Verique a documentao do seu computador para saber qual a tecla
correta.
Enquanto estiver no programa de congurao do sistema (tambm
conhecido como BIOS), instrua o sistema para detectar a nova unidade
automaticamente.
Salve as conguraes e saia da BIOS.
Reinicie o computador.
Quando o computador for reiniciado, ele dever reconhecer a nova unidade.
Se o seu computador ainda assim no reconhecer a unidade, entre em contato
com o seu representante Intel local para obter suporte ou v para http://www.
intel.com/support/ssdc/hpssd/sb/CS-030158.htm para Perguntas Frequentes
(FAQ) ou para http://www.intel.com/support/9089.htm para obter o nmero de
seu suporte ao cliente local.
CONSIDERAES PS-INSTALAO
As SSDs no precisam ser desfragmentadas como as HDDs. Desligue qualquer
desfragmentador de disco para evitar desgaste desnecessrio da SSD. Para
o Microsoft* Windows Vista*, use as seguintes instrues para desligar o
desfragmentador de disco:
1. No menu Iniciar, clique em Todos os programas > Acessrios >
Ferramentas do sistema > Desfragmentador de disco.
2. Desmarque a opo Executar seguindo um agendamento e clique em OK.
Para obter mais informaes sobre as SSDs da Intel, incluindo download de
ferramentas e sugestes para otimizao de unidades de disco, v para http://
www.intel.com/support ou para http://www.intel.com/go/ssd.
http://www.intel.com/go/ssd
LIMITI DI GARANZIA
Consultare il CD fornito per la Garanzia del prodotto.
OPERAZIONI PRELIMINARI
Prima di iniziare, rileggere la documentazione del computer per stabilire
se il sistema supporta Serial ATA (SATA) sulla scheda madre e la posizione
dei connettori SATA. Se il PC non dotato di connettori SATA, necessario
acquistare un adattatore host SATA compatibile con il computer e il sistema
operativo in uso. Quindi, attenendosi alle istruzioni di installazione del
produttore, procedere all'installazione dell'adattatore host SATA unitamente al
driver corrispondente. Inoltre, necessario disporre dei seguenti elementi:
Quattro viti di ssaggio M3-0,5x5 mm o M3-0,5x 6 mm (comprese) e di un
cacciavite Phillips #2.
Un cavo di interfaccia SATA con una lunghezza massima di 1 metro. (solo
per uso con modello desktop)
Un cavo di alimentazione o adattatore compatibile SATA. (fattore di forma
2,5") (solo per uso con modello desktop)
http://www.intel.com/go/ssd
PC DESKTOP
Per installare l'unit SSD su un PC desktop attenersi alle seguenti istruzioni:
1. Se il PC desktop dotato di slot per unit da 3,5 pollici, utilizzare la staffa
dell'adattatore per montare in modo sicuro l'unit SSD.
Posizionare l'unit SSD (con il logo Intel rivolto in alto) sull'adattatore.
Vedere Figura 1. Assicurarsi che i quattro fori sul lato sinistro e sul lato
destro della staffa dell'adattatore siano allineati all'unit SSD. Fissate
il disco inserendo quattro delle viti M3-0,5X5 mm or M3-0,5x6 in
ciascuno dei fori corrispondenti.
Nota: non stringere eccessivamente le viti, perch si potrebbe
danneggiare l'unit SSD.
2. Collegare un'estremit del cavo d'interfaccia SATA al connettore
d'interfaccia SATA sulla scheda madre del proprio computer o sull'adattatore
host SATA.
Nota: i connettori SATA sono dotati di indicazioni per l'orientamento corretto.
http://www.intel.com/go/ssd
Figura 1. Collegamento della staffa dell'adattatore per uso in slot da 3.5" di
PC desktop
3. Collegare l'altra estremit del cavo d'interfaccia SATA all'unit SSD. Vedere
Figura 2, voce 1.
4. Collegare il cavo di alimentazione o l'adattatore all'unit SSD. Vedere
Figura 2, voce 2.
5. Fissate il disco inserendo una delle viti M3-0,5x5mm o M3-0,5x6mm in
ciascuno dei fori di montaggio laterali o inferiori oppure facendo scorrere
l'unit SSD con la staffa dell'adattatore nello slot per unit da 3,5 pollici
del PC.
Nota: non stringere eccessivamente le viti, perch si potrebbe danneggiare
l'unit SSD.
Figura 2. Collegamento del cavo di interfaccia SATA e del cavo di
alimentazione per uso con PC desktop
http://www.intel.com/go/ssd
NOTEBOOK
Per accedere allo slot del disco seguire le istruzioni del produttore del notebook
relative al proprio modello.
Per installare l'unit SSD sul notebook attenersi alle seguenti istruzioni
1. Far scorre l'unit SSD nell'apertura del notebook. Vedere Figura 3.
Figura 3. Inserimento dell'unit SSD nel relativo slot del notebook
http://www.intel.com/go/ssd
CONSIDERAZIONI POST-INSTALLAZIONE
Le unit SSD non necessitano di deframmentazione come le unit HDD.
Disattivare l'opzione di deframmentazione per evitare un'inutile usura dell'unit
SSD. Per Microsoft* Windows Vista*, seguire le istruzioni seguenti per la
disattivazione dell'opzione di deframmentazione dischi:
1. Nel menu di avvio, selezionare Tutti i programmi > Accessori > Utilit
di sistema > Unit di deframmentazione dischi.
2. Deselezionare l'opzione "Esegui in base a una pianicazione", quindi fare
clic su OK.
Per maggiori informazioni sulle unit SSD Intel, compresi i download degli
strumenti e i suggerimenti per l'ottimizzazione delle unit, visitare il sito
http://www.intel.com/support o http://www.intel.com/go/ssd.
http://www.intel.com/go/ssd
OGRANICZONA GWARANCJA
Gwarancja na Produkt znajduje si na zaczonej pycie CD.
PRZED ROZPOCZCIEM
Przed rozpoczciem prosz skorzysta z dokumentacji swojego
komputera, aby sprawdzi, czy posiadany system obsuguje Serial
ATA (SATA) na pycie gwnej, oraz skontrolowa pooenie
przyczy SATA. Jeeli komputer nie posiada zczy SATA,
konieczne bdzie zakupienie karty kontrolera SATA kompatybilnej
z posiadanym komputerem i systemem operacyjnym. Nastpnie,
korzystajc z instrukcji instalacji producenta karty kontrolera SATA,
naley zainstalowa kart oraz posiadany dysk. Potrzebne bd
rwnie nastpujce rzeczy:
Cztery ruby montaowe M3-0,5x5mm lub M3-0,5 x 6 mm (w
zestawie) oraz rubokrt krzyykowy #2.
Kabel interfejsu SATA, o maksymalnej dugoci 1 metra. (Tylko
model uywany z komputerem stacjonarnym)
Kabel zasilajcy kompatybilny z SATA (wielko obudowy
2,5 cala) lub cznik. (Tylko model uywany z komputerem
stacjonarnym)
http://www.intel.com/go/ssd
INSTRUKCJA INSTALACJI
W razie potrzeby korzysta z poniszych instrukcji w celu podczenia
przewodw i zamontowania dysku.
KOMPUTER STACJONARNY
Skorzysta z poniszych instrukcji, aby zainstalowa SSD na
komputerze stacjonarnym:
1. Jeeli komputer posiada kiesze na dysk 3,5 cala, naley
skorzysta z szyn montaowych, aby bezpiecznie zamontowa
SSD.
Umieci SSD (z logo Intel skierowanym w gr) na szynie
montaowej. Patrz Rysunek 1. Upewni si, e wszystkie
cztery otwory po lewej i prawej stronie szyny montaowej
zostay wyrwnane z otworami w obudowie SSD. Zamocowa
dysk wkrcajc jedn rub M3-0,5x5mm lub M3-0,5 x 6
mm w kady z czterech przeznaczonych do tego otworw
montaowych.
Uwaga: Nie wkrca rub za mocno, gdy moe to spowodowa
uszkodzenie SSD.
http://www.intel.com/go/ssd
2. Podczy jeden koniec przewodu interfejsu SATA do zcza
interfejsu SATA na pycie gwnej komputera lub karcie kontrolera
SATA.
Uwaga: Zcza SATA s wyprolowane dla zapewnienia
poprawnego uoenia wtyczki.
Rysunek 1. Mocowanie szyn montaowych uywanych do
umieszczenia dysku w kieszeni 3,5 cala komputera stacjonarnego
http://www.intel.com/go/ssd
Rysunek 2. Podczanie przewodu interfejsu SATA i przewodu
zasilania w przypadku instalowania w komputerze stacjonarnym
LAPTOP
Skorzysta z instrukcji producenta posiadanego modelu laptopa, aby
dowiedzie si, jak uzyska dostp do wnki na dysk.
Uy poniszych instrukcji, aby bezpiecznie zamontowa SSD w
laptopie
1. Wsun SSD we wnk dysku w laptopie. Patrz Rysunek 3.
Rysunek 3. Wsuwanie SSD we wnk dysku w laptopie
http://www.intel.com/go/ssd
Rysunek 4. Mocowanie SSD we wnce dysku w laptopie
KONFIGURACJA BIOS-U
Zamkn obudow komputera i ponownie uruchomi system.
Komputer powinien automatycznie rozpozna nowo zainstalowany
SSD. Jeli tak si nie stanie, skorzysta z poniszych instrukcji, aby
wykry dysk:
Uruchomi komputer ponownie. Podczas wstpnego adowania
systemu uruchomi program konguracyjny, ktry mona
wczy naciskajc specjalny klawisz, taki jak ESC, F1 lub
DELETE. Informacj o odpowiednim klawiszu mona znale
w
dokumentacji komputera.
W programie do konguracji systemu (zwanym rwnie BIOS)
zmieni ustawienia tak, aby system automatycznie wykrywa nowy
dysk.
Zachowa ustawienia i wyj z BIOS-u.
Uruchomi komputer ponownie.
Po ponownym uruchomieniu komputera powinien on rozpozna nowy
dysk. Jeeli jednak komputer wci nie rozpoznaje dysku, naley
skontaktowa si z lokalnym przedstawicielem rmy Intel w celu
uzyskania pomocy lub wej na stron http://www.intel.com/support/
ssdc/hpssd/sb/CS-030158.htm, gdzie znajduj si czsto zadawane
pytania (FAQ) lub na http://www.intel.com/support/9089.htm, aby
uzyska numer telefonu lokalnego punktu obsugi klienta.
http://www.intel.com/go/ssd
DODATKOWE INFORMACJE
Dyskw SSD nie trzeba defragmentowa tak, jak konwencjonalnych
HDD. Prosz wyczy wszelkie defragmentatory dysku, aby nie
doszo do niepotrzebnego zuywania SSD. W przypadku Microsoft*
Windows Vista*, defragmentator dysku wycza si w nastpujcy
sposb:
1. W menu Start klikn Wszystkie programy > Akcesoria >
Narzdzia systemowe > Defragmentator dyskw.
2. Wyczy opcj Uruchom zgodnie z harmonogramem i klikn
OK.
Wicej informacji na temat dyskw SSD rmy Intel, a take narzdzia
do pobrania i sugestie dotyczce optymalizacji dysku mona znale
pod adresem http://www.intel.com/support lub http://www.intel.
com/go/ssd.
http://www.intel.com/go/ssd
!"$! %!" & %'" %!.
"" +' 7; &<"!< ! ""= ' !"
%<>" 7""!<, %"!" ' ' " "!=
%'; %"$ ! ! %!'""'<; ""=! ATA
(SATA), $" %""'" "!!%'$"" &?" SATA.
@!' "!= %'" %<>" &?"; SATA !!>,
"7X %7"! ''" SATA, !"!;= !
!%'<&"; %<>" %"= !!"=. [",
!%'<& ! %&"' ''" SATA, !'""
!< ''" !"!>\= =". ]" ,
%"7>! !'">\" %";:
^";" "%"$;X M3-0,5x5 ' M3-0,5x6 (X
%'") "!7& " _2.
""=!;= 7"'< SATA, !'< '
!!'" 1 ". (`'< ' !'<;X "'"=)
]7"'< % ' %", !"!;" ! ""=! SATA.
( ! 2,5 >=) (`'< ' !'<;X "'"=)
q' !%'<& %", !'";X X
7'", !'"=" ! % !" ' "
%<>".
^7; 7"!%"+< '+> 7"&%!!< &\ !%'<&"=
!!";, ;%'" !'">\" "=!:
q' 7 '>+" ]v{@|} `v~ ` [@`]
[|@]`@ v]]|`~ {v`v@. !'" !
%"' ; !<" 7"> %'>+" 7"'<
% &"".
q' !'<;X %<>" '>+" ]v{@|} `v~
` [@`] " ! %"'. !'" !
http://www.intel.com/go/ssd
'"=" %""; !, +7; %'>+< 7"'
("!' "7X), !" %"'<.
^7; !< ""'<;= %"'< !'<;=
%<>", ;%'" !'">\" "=!:
1. @!' " !'< %<>" ""! !" '
%"' 3,5 >=, !%'<&=" -%""X '
"$ "%'" ""'< %"'.
!" ""'<;= %"'< (! &7$""
'% Intel "X) %""X". . !"#. 1.
7""!<, + !" +";" "! ! '"=
%= !; -%""X !"\"; !
!"!>\ "! ""'<
%"'. ["%" %"'<, ! +";"
M3-0,5x5 ' M3-0,5x6 $" & !"!>\X
"!=.
http://www.intel.com/go/ssd
!"$%&'("%: &7"=" +"&" & ,
$" %"< ""'<;= %"'<.
2. !<" " ""=! 7"' SATA
!"!>\= &?" "!= %'" %<>"
' ''"" SATA.
!"$%&'("%: &?"; SATA "> !%"'<;" ;!%;'>+ ' 7"!%"+" %'<= " %
%'>+".
"#. 1. ! -%""X !"" %<>" '
%"' 3,5 >=.
http://www.intel.com/go/ssd
"#. 2. '>+"" ""=! 7"' SATA 7"'
% ' !%'<& ! !'<; %<>"
^7; %'+< !% !" ' %"' !"= "'
7, &<"!< ! !"= " %&"'.
q' "$= ! ""'< %"' 7
;%'" !'">\" "=!.
1. !<" ""'<;= %"'< !"!>\""
'7'"" %!" 7. . "#. 3.
"# 3. ! ""'< %"' '7'""
%!" 7
http://www.intel.com/go/ssd
2. ["%" %"'<, ! % M3-0,5x5
' M3-0,5x6 $" "!" ' "%'",
!%'$"" 7= ' $"= +!. . "#. 4.
!"$%&'("%: &7"=" +"&" & ,
$" %"< ""'<;= %"'<.
"# 4. ]"%'"" ""'< %"' '7'"
%!" 7
http://www.intel.com/go/ssd
!'" &%! %<>" ;= %"'< '$" 7;< !%&.
@!' %"'< !" "\" " !%&"! %<>", 7"!<
& %\<> "! %"!"'> % Intel ' &="
"7-!= % "! http://www.intel.com/support/ssdc/hpssd/sb/CS030158.htm ' &'" ! "= &"'" %!;
"; (FAQ) ' % "! http://www.intel.com/support/9089.htm '
%! " "'" "!= !'$7; "X+"!= %"$.
'+" $"!X !, ' ""'<;X %"'"= " "7"!
"". &7"$" &'" & ""'<
%"' '>+" !" %; ' "" !.
!%'<& !!"; Microsoft*Windows Vista* ;%'" !'">\"
"=!, +7; '>+< ""> !.
1. "> Start (!) ;7"" #% )!*+!'$$, > 0'(5'!0(,%
> 678%9(,% > %;!'+$%(0'<"= 5"#?'.
2. " " %'" ;%'< % !%!> $"
% OK.
q' %'+" %'"'<= ""'<;X
%"'X Intel, '>+ && %;X !"!
"" % %& %"'"=, %!"" "7-!=
% "! http://www.intel.com/support ' http://www.intel.
com/go/ssd.
http://www.intel.com/go/ssd
M3-0.5x5mm M3-0.5x6mm
SATA 1
SATA 2.5
AC
AC
http://www.intel.com/go/ssd
1. 3.5
( Intel )
1
M3-0.5x5mm M3-0.5x6mm
2. SATA SATA
SATA
SATA
1. 3.5
3. SATA
2 1
4. 2 2
http://www.intel.com/go/ssd
5. M3-0.5x5mm M3-0.5x6mm
3.5
2. SATA
1. SATA
2.
http://www.intel.com/go/ssd
1. 3
3.
2. M3-0.5x5mm M3-0.5x6mm
4.
4.
http://www.intel.com/go/ssd
BIOS
ESCF1 DELETE
BIOS
BIOS
Intel
http://www.intel.com/support/ssdc/hpssd/sb/CS-030158.htm
http://www.intel.com/support/9089.htm
1. >>
>
2. .
Intel
http://www.intel.com/support http://www.intel.
com/go/ssd
http://www.intel.com/go/ssd
M3-0.5x5 M3-0.5x6 #2
1 SATA
SATA 2.5
PC
PC
SSD PC
SSD
http://www.intel.com/go/ssd
SSD
1. 3.5
SSD
SSD 1
SSD
M3-0.5x5 M3-0.5x6
SSD
2. SATA SATA
SATA
SATA
http://www.intel.com/go/ssd
1. 3.5
3. SATA SSD 2 1
4. SSD 2 2
5.
M3-0.5x5 M3-0.5x6 SSD
3.5
SSD
2. SATA
1. SATA
2.
http://www.intel.com/go/ssd
SSD
1. SSD 3
3. SSD
2. M3-0.5x5 M3-0.5x6
4
SSD
4. SSD
http://www.intel.com/go/ssd
BIOS
SSD
ESCF1 DELETE
BIOS
BIOS
SSD HDD
SSD Microsoft* Windows Vista*
2. .
SSD
http://www.intel.com/support http://www.intel.com/go/
ssd
http://www.intel.com/go/ssd
CD .
, ATA(SATA)
SATA . PC
SATA ,
SATA . , SATA
. .
M3-0.5x5mm M3-0.5x6mm 4() (#2)
.
1 SATA . (
)
SATA (2.5 ) . (
)
PC
.
.
, PC AC
. ,
.
, SSD PC AC
. ,
.
. SSD
.
.
. .
http://www.intel.com/go/ssd
.
.
.
.
( )
.
SSD PC .
1. 3.5 ,
SSD .
SSD( ) . 1
.
4 SSD
. M30.5X5 mm M3-0.5x6 mm 4
.
: SSD .
2. SATA SATA
SATA .
: SATA
.
http://www.intel.com/go/ssd
1. PC 3.5
3. SATA SSD . 2,
1 .
4. SSD . 2, 2
.
5. M3-0.5x5mm M3-0.5x6mm
SSD 3.5
.
: SSD .
2. PC SATA
1. SATA
2.
http://www.intel.com/go/ssd
.
SSD .
1. SSD . 3
.
3. SSD
2. M3-0.5x5mm
M3-0.5x6mm . 4 .
: SSD .
4. SSD
http://www.intel.com/go/ssd
BIOS
.
SSD . ,
.
. ,
. ESC, F1
DELETE .
.
(BIOS )
.
BIOS .
.
.
,
, http://www.intel.com/support/ssdc/hpssd/
sb/CS-030158.htm FAQ , http://www.intel.com/
support/9089.htm
.
SSD HDD . SSD
. Microsoft* Windows Vista*
.
1. [] , > > >
.
2. " " , .
SSD
http://www.intel.com/support http://www.intel.
com/go/ssd .
http://www.intel.com/go/ssd
CD
SATA
SATA
SATA
M3-0.5x5mm M3-0.5x6mm 4 2
1 SATA
SATA 2.5
AC
SSD AC
http://www.intel.com/go/ssd
SSD
SSD
1. 3.5
SSD
SSD
1
4 SSD M3-0.5x5mm
M3-0.5x6mm 4
SSD
2. SATA
SATA SATA
http://www.intel.com/go/ssd
SATA
1. 3.5
3. SATA SSD
2 1
4. SSD 2
2
5. M3-0.5x5mm M3-0.5x6mm
SSD 3.5
SSD
2 SATA
1. SATA
2.
http://www.intel.com/go/ssd
SSD
1. SSD
3
3. SSD
2. M3-0.5x5mm M3-0.5x6mm 1
4
SSD
4. SSD
http://www.intel.com/go/ssd
SSD
ESCF1DELETE
BIOS
BIOS
.
1. []
2. [] [OK]
SSD http://www.intel.com/support
http://www.intel.com/go/ssd
http://www.intel.com/go/ssd
http://www.intel.com/go/ssd
916-377-7000
Latin America
Spanish
Portuguese
001-916-377-0114
001-916-377-0180
Europe
Belgium
Denmark
Finland
France
Germany
Holland
Italy
Norway
Spain
Sweden
United Kingdom
Japan
02-714 3182
38-487077
9-693-79297
01-41-91 85 29
069-9509-6099
020-487-4562
02-696-33276
23-1620-50
91-377-8166
08-445-1251
0870-607-2439
0120-868686
Asia-Pacic
Australia
Hong Kong
Korea
Singapore
Taiwan
China
Malaysia
New Zealand
1800-649-931
852-2 844-4456
822-767-2595
65-6213-1311
2-2545-1640
800-820-1100
1800-80-1390
0800-444-365
Philippines
Indonesia
Thailand
Pakistan
Vietnam
India
1800-1-651-0117
803-65-7249
1800-6310003
63-2-636-8415
63-2-636-8416
0006517-2-68303634
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and
other countries.
*Other names and brands may be claimed as the property of others.
Copyright 2010 Intel Corporation. All rights reserved.
E84081-001